VICMARC® MACHINERY PTY LTD AUSTRALIAN MANUFACTURERS OF QUALITY WOODTURNING LATHES, CHUCKS AND ACCESSORIES FOR OVER 26 Y
Views 157 Downloads 89 File size 2MB
VICMARC® MACHINERY PTY LTD
AUSTRALIAN MANUFACTURERS OF QUALITY WOODTURNING LATHES, CHUCKS AND ACCESSORIES FOR OVER 26 YEARS Phone: (07) 3284 3103 Int Ph: 61-7 3284 3103 Email: [email protected]
Fax: (07) 3283 4656 Int Fax: 61-7 32834656 Web: www.vicmarc.com
LATHES AND ACCESSORIES CATALOGUE
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
Vicmarc® Machinery Pty Ltd
Vicmarc® Machinery, a family operated business, has been manufacturing wood turning lathes and accessories for the hobbyist and professional since 1984. Director Victor Verrecchia trained in Switzerland in Engineering and Tool Making. Since 1968 he has been designing and manufacturing all types of machinery. Later his focus turned specifically to designing and manufacturing quality Wood Turning Lathes and accessories. Vicmarc® is dedicated in providing to its world wide customers, machinery of the highest quality. Only the best materials and latest high-precision computer-controlled machinery are used in the manufacturing of Vicmarc® Lathes and Accessories.
P2
www.vicmarc.com
Vicmarc® Lathes and Chucks are known and respected internationally for their ROBUST design and EASE of use. Vicmarc® machinery continues to respond to the demands of the market, updating and improving at all stages of design and manufacture through constant research and development. It is no wonder therefore that Vicmarc® retains its place as a leader Nationally and Internationally in its field.
VICMARC® MACHINERY PTY LTD
TABLE OF CONTENTS
1. VL100 LATHES ............................... 4 1.1 VL100 BM 6 SPEED ............................4 1.2 VL100 SM EVS ..................................5
2. VL100 LATHE FEATURES ............... 6 3. VL100 LATHE ACCESSORIES.......... 7 4. VL175 LATHES ............................... 8 4.1 VL175 BM EVS ...................................8 4.2 VL175 SM EVS ...................................9
5. VL175 LATHE FEATURES ............... 10 6. VL175 LATHE ACCESSORIES.......... 11 7. VL200 LATHES .............................. 12 7.1 VL200S BM 6 SPEED ..........................12 7.2 VL200L BM 6 SPEED ..........................12 7.3 VL200L SM 6 SPEED ..........................13 7.4 VL200S ASM EVS ...............................14 7.5 VL200L ASM EVS ...............................15 7.6 VL200 SIT DOWN ..............................16
8. VL200 LATHE ACCESSORIES.......... 17 9. VL300 LATHES ............................... 18
9.1 VL300S BM 3 SPEED .............. 18 9.2 VL300L BM 3 SPEED............... 18 9.3 VL300S ASM EVS .................... 19 9.4 VL300L ASM EVS .................... 20 10. VL300 LATHE ACCESSORIES........ 21 11. VL200/300 LATHE FEATURES ...... 24 12. SAFETY COLLAR........................... 25 13. ADJUSTABLE HAND LEVERS ........ 25
19. SANDING TABLE .......................... 28 20. BALANCING SYSTEM.................... 29 21. OVAL TURNING DEVICE VOD300 . 30 22. VACUUM CHUCKS ........................ 31 23. SWIVEL HEAD SANDER ................ 33 24. FACE PLATES ................................ 33 25. VM90 CHUCK ............................... 34 26. VM100 CHUCK ............................. 34 27. VM120 CHUCK ............................. 35 28. VM150 CHUCK ............................. 36 29. ECCENTRIC CHUCK #3 ................ 37 30. ECCENTRIC CHUCK #2 ................ 38 31. ECCENTRIC CHUCK ACCESSORIES 39 32. CHUCK INSERTS ............................ 40 33. CHUCK ACCESSORIES ................... 42 33.1 CHUCK WOOD SCREW ....................42 33.2 SCREW FACE PLATE ........................42 33.3 DUAL SCREW FACE PLATE ..............42 33.4 3 IN 1 SCREW FACE PLATE ..............42 33.5 T-HANDLE SPANNER .......................43 33.6 SPARE PARTS ...................................43
34. JAWS ........................................... 44 34.1 FOR VM90/100 CHUCKS .................44 34.2 FOR VM120/150 CHUCKS ...............50 34.3 JAW RANGE SPEC CHART ...............56
35. APPAREL ........................................ 58
14. TOOLREST COLLARS.................... 25 15. DRIVE DOGS & LIVE CENTRES .... 26 16. HOLLOWING TOOL SUPPORT ...... 27 17. GAUGES ....................................... 27
Front picture supplied by Glenn Lucas
18. OUTBOARD TURNING .................. 28
professional bowl turner in Ireland.
www.vicmarc.com
P3
VICMARC® MACHINERY PTY LTD
1. VL100 LATHES
3630
2160
1780
1170
600
The VL100 Bench Mount has thread sizes compatible with large size machines, with features such as 6 speed pulleys designed for single phase 1400rpm motors (motor not included), 24-position indexing head, hollow tailstock spindle with 65mm travel and headstock spindle equipped with taper roller bearings.
960
1.1 VL100 BM 6 SPEED
The VL100 has optional 500mm bolt on extension facility. RPM on each step of the headstock pully (Based on a 1500rpm motor)
Available in:
VL100 BM 6SP Specifications
P4
Centre Height
128mm
Thread
Order Code
Swing Over Bed
256mm
M30 x 3.5
V00730-1
Distance Between Centres
350mm
M33 x 3.5
V00730-2
1" x 8
V00730-6
1" x 10
V00730-7
Work Height (Bed Bottom to Spindle Centre)
231mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
600, 960, 1170, 1780, 2160, 3630 rpm
6 Speeds
Toolrest Post Diameter
19mm
Hole Through Head & Tailstock Spindles
10.5mm
Quill Travel
65mm
Net Weight Length x Width x Height (mm)
www.vicmarc.com
Standard Accessories 1
Faceplate 75mm or 100mm
2
Live Centres (Cup and Cone)
2
Tool Rests 80mm and 150mm
1
Knockout Bar
30kg
1
Drive Dog
760x200x320
1
Spanner
1
6 Step Motor Pulley
1
Vicmarc® Hat
1
Owner’s Manual
VICMARC® MACHINERY PTY LTD
3500(1:2.1)
2470(1:1.2)
1175(1:2.5)
1.1 VL100 SM EVS
Headstock Pulley Maximum RPM The VL100 Stand Mount EVS (electronic variable speed) provides up to 150% torque on low RPM, spindle speeds from 12-3500 rpm (see table), 240 volt – sufficient power to meet demands of the serious wood turner (0.55kW / 0.75HP Motor).
Digital Readout
Vicmarc® were the first to introduce MT2, and taper roller bearings in this size lathe. The Vicmarc® mini lathe is in a class of its own when compared to other mini lathes on the market. The best value feature-by-feature of any mini lathe sold in the world. Vicmarc® is clearly the mini lathe of choice. The VL 100 has an optional 500mm bolt on extension facility.
Pulley Ratio 1.2 : 1
1: 1.2
1: 2.5
3000
3500
2470
1175
2500
2917
2058
979
2000
2333
1647
783
1500
1750
1235
588
1000
1167
823
392
500
583
412
196
250
292
206
98
100
117
82
39
30
35
25
12
Available in: VL100 SM EVS Specifications
Thread
Power Plug
Order Code
Centre Height
128mm
M30 x 3.5
Australia
V00734-1AU
Swing Over Bed
256mm
M33 x 3.5
Europe
V00734-2EU
M33 x 3.5
United Kingdom
V00734-2UK
M33 x 3.5
United States
V00734-2US
1" x 8
United States
V00734-6US
1" x 10
Australia
V00734-7AU
Distance Between Centres
350mm
Work Height (Stand Bottom to Spindle Centre)
471mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
3 Speeds
( See Table)
Toolrest Post Diameter
19mm
Hole Through Head & Tailstock Spindles
10.5mm
Quill Travel
65mm
Net Weight
58kg
Length x Width x Height (mm)
760x350x600
Standard Accessories 1
Faceplate 75mm or 100mm
2
Live Centres (Cup and Cone)
2
Tool Rests 80mm and 150mm
1
Knockout Bar
1
Drive Dog
1
Spanner
1
Vicmarc® Hat
1
Owner’s Manual
www.vicmarc.com
P5
VICMARC® MACHINERY PTY LTD
2. VL100 LATHE FEATURES
Headstock spindle fitted with taper roller bearings
Electronic Variable Speed with digital display (SM model only)
Revised & improved indexing pin
P6
www.vicmarc.com
mm scale on Quill to facilitate reading the depth of drilling
VICMARC® MACHINERY PTY LTD
3. VL100 LATHE ACCESSORIES TOOLRESTS - (Post 19mm Diameter)
200mm
150mm
100mm
80mm
Part No. V01163
Part No. V01165
Part No. V01164
Part No. V01166
EXTENSION BED
FACE PLATES
Part No. V00105 The 500mm Bed Extension for mounting on to VL100 includes 2 x M10 bolts with two hardened bushes for accurate location.
CAMLOCK (Banjo)
Part No. V00161 A separate Camlock can be purchased. It can be used on its own with another toolrest
75mm and 100mm faceplates are best suited for the VL100 lathe, however larger sizes are also available (see Page 33)
3 POINT STEADY VL100 80mm
Part No. V01090 8-80mm diameter work holding capacity, used to support work piece. www.vicmarc.com
P7
VICMARC® MACHINERY PTY LTD
4 VL175 LATHES 4.1 VL175 BM EVS
Separate EVS (electronic variable speed) box that can be mounted away from the lathe. Includes magnetic remote switch box that can be positioned anywhere you are working.
Headstock positioned at 90 degrees. The headstock can be positioned in 4 positions 0, 30, 60 & 90 degrees.
3000 (1:1)
The VL175 lathe has a 1.1kw electronic variable speed unit, which gives 200% torque in low RPM. On 1:1 ratio the speeds range from 30 to 3000rpm (see table). On 1:3 ratio the speeds range from 10 to 965rpm. For extra torque, simply change the Poly V Belt to the 1:3 ratio.
965 (1:3.1)
The VL175 Bench Mount EVS (electronic variable speed) is ideal for the hobbyist. This is a versatile machine because of its 90-degree swivel head facility and solid cast iron construction. The VL175 bench model is only available with electronic variable speed. An outboard turning attachment is an optional extra. The Variable Speed Unit for VL175 is contained inside a strong steel enclosure and can be mounted on the wall behind the machine.
Headstock Pulley maximum RPM
VL175 BM EVS Specifications Centre Height
180mm
Swing Over Bed
360mm
Distance Between Centres
1000mm
Work Height (Bed Bottom to Spindle Centre)
480mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
1500
1500
483
Spindle Bearings
Taper Roller
1000
1000
322
2 Speeds
(see Table)
500
500
161
Toolrest Post Diameter
30mm
250
250
80
Hole Through Headstock Spindle
15mm
100
100
32
Hole Through Tailstock Spindle
10.5mm
30
30
10
Quill Travel
75mm
Net Weight
138kg
Length x Width x Height (mm)
1800x385x780
Available in:
P8
Digital Readout
Pulley Ratio 1:1
1: 3.1
3000
3000
965
2500
2500
804
2000
2000
643
Standard Accessories 1
Faceplate 100mm or 125mm
1
Live Centre
1
Tool Rests 300mm
Thread
Power Plug
Order Code
1
10 mm Knockout Bar
M30 x 3.5
Australia
V00741-1AU
1
14mm Knockout Bar
M33 x 3.5
Europe
V00741-2EU
1
Drive Dog
M33 x 3.5
United Kingdom
V00741-2UK
1
Spanner
M33 x 3.5
United States
V00741-2US
1
Vicmarc® Hat
1 1/4" x 8
United States
V00741-3US
1
Owner’s Manual
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
4.2 VL175 SM EVS
Separate EVS (electronic variable speed) box that can be mounted away from the lathe. Includes magnetic remote switch box that can be positioned anywhere you are working.
The VL175 Stand Mount EVS (electronic variable speed) lathe has a 1.1kw unit, which gives 200% torque in low RPM. On 1:1 ratio the speeds range from 30 to 3000rpm (see table). On 1:3 ratio the speeds range from 10 to 965rpm. For extra torque, simply change the Poly V Belt to the 1:3 ratio. The machine has a 360mm swing, 1000mm between centres, and a front turning facility is possible by swivelling the head to 90° to the bed.
Headstock positioned at 30 degrees. The headstock can be positioned in 4 positions 0, 30, 60 & 90 degrees.
3000 (1:1)
965 (1:3.1)
Flat Pack Stand can also be purchased separately. Part No. V01082
Headstock Pulley maximum RPM
VL175 SM EVS Specifications Centre Height
180mm
Swing Over Bed
360mm
Distance Between Centres
1000mm
Work Height (Stand Bottom to Spindle Centre)
1170mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
2 Speeds
(See Table)
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Hole Through Tailstock Spindle
10.5mm
Quill Travel
75mm
Net Weight
210kg
Length x Width x Height (mm)
1640x750x1480
Available in:
Digital Readout
Pulley Ratio 1:1
1: 3.1
3000
3000
965
2500
2500
804
2000
2000
643
1500
1500
483
1000
1000
322
500
500
161
250
250
80
100
100
32
30
30
10
Standard Accessories 1
Faceplate 100mm or 125mm
1
Live Centre
1
Tool Rests 300mm
Thread
Power Plug
Order Code
1
10 mm Knockout Bar
M30 x 3.5
Australia
V00743-1AU
1
14mm Knockout Bar
M33 x 3.5
Europe
V00743-2EU
1
Drive Dog
M33 x 3.5
United Kingdom
V00743-2UK
1
Spanner
M33 x 3.5
United States
V00743-2US
1
Vicmarc® Hat
1 1/4" x 8
United States
V00743-3US
1
Owner’s Manual www.vicmarc.com
P9
VICMARC® MACHINERY PTY LTD
5. VL175 LATHE FEATURES
Very large diameter pieces can be turned with this machine and its optional outboard turning attachment.
The swiveling head allows for easier access when working on the ends of work pieces.
Magnetic Remote Switch Box that can be positioned anywhere you are working.
Easily adjustable motor tensioning system with a 2-Step pulley system. P10
www.vicmarc.com
24 holes on headstock pulley for indexing and spindle locking.
mm scale on Quill to facilitate reading the depth of drilling.
VICMARC® MACHINERY PTY LTD
6. VL175 LATHE ACCESSORIES TOOLRESTS - (Post 30mm Diameter)
400mm
300mm
200mm
Part No. V01175
Part No. V01173
Part No. V01171
“S”
“Z”
Goblet
when looking from the top down the shape resembles an S
when looking from the top down the shape resembles a Z
Part No. V01181
Part No. V01183
Part No. V01179
CAMLOCK (Banjo)
1000mm and 600mm toolrest double posted Part No. V01168 (1000mm) Part No. V01177 (600mm)
FACE PLATES
100mm to 150mm faceplates are best suited for the VL175 lathe, however larger sizes are also available (see Page 33).
Part No. V00162 A separate Camlock can be purchased.It can be used on its own with another toolrest or in conjunction with a double toolrest
3 POINT STEADY VL175 50mm
Part No. V01091 8-50mm diameter work holding capacity, used to support work piece
3 POINT STEADY VL175 170mm
Part No. V01092 8-170mm diameter work holding capacity, used to support work piece www.vicmarc.com
P11
VICMARC® MACHINERY PTY LTD
7. VL200 LATHES
7.1 VL200S BM 6 SPEED
Available in:
VL200S BM Specifications Centre Height
200mm
Swing Over Bed
400mm
Distance Between Centres
400mm
Work Height (Bed Bottom to Spindle Centre)
336mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
6 Speeds
240, 534, 832, 1317, 1815, 2916 rpm
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Thread
Order Code
Hole Through Tailstock Spindle
10.5mm
M30 x 3.5
V00755-1
Quill Travel
75mm
M33 x 3.5
V00755-2
Net Weight
90kg
1 1/4" x 8
V00755-3
Length x Width x Height (mm)
1150x400x620
7.2 VL200L BM 6 SPEED
Available in:
VL200L BM Specifications Centre Height
200mm
Swing Over Bed
400mm
Distance Between Centres
1000mm
Work Height (Bed Bottom to Spindle Centre)
336mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
6 Speeds
240, 534, 832, 1317, 1815, 2916 rpm
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Thread
Order Code
Hole Through Tailstock Spindle
10.5mm
M30 x 3.5
V00751-1
Quill Travel
75mm
M33 x 3.5
V00751-2
Net Weight
98kg
1 1/4" x 8
V00751-3
Length x Width x Height (mm)
1660x400x620
P12
Tool Rests 300mm
1
10mm Knockout Bar
1
14mm Knockout Bar
1
Drive Dog
1
Spanner
1
6 Step Motor Pulley
1
Vicmarc® Hat
1
Owner’s Manual
www.vicmarc.com
2916
1
1815
Live Centre
1317
1
832
Faceplate 100mm or 125mm
534
1
240
Standard Accessories for VL200S and VL200L BM 6 Speed RPM on each step of the headstock pully (Based on a 1500rpm motor)
The VL200 Bench Mount series is designed to mount onto you own bench and give the capacity to turn large work pieces. The lathes come with a 6 Step motor pulley for use with your own motor (motor not included).
VICMARC® MACHINERY PTY LTD
2916
1815
1317
832
534
240
7.3 VL200L SM 6 SPEED
RPM on each step of the headstock pully
The VL200 Long Stand Mount 6 Speed Lathe has the capacity of a full size lathe and offers many features such as tapered roller bearings, indexing facility, storage space, easy discharge wood shaving chute and through holes in both spindles. A fully cast iron lathe, mounted on a solid constructed 3mm steel stand, with a 700mm footprint, gives the turner a vibration free machine. This is an excellent lathe at an economical price. This lathe is also fitted with safety switches on the motor door and the headstock cover plate, which makes it ideal for schools and first lathe buyers.
Available in: Thread
Power Plug
Order Code
M30 x 3.5
Australia
V00752-1AU
M33 x 3.5
Europe
V00752-2EU
M33 x 3.5
United Kingdom
V00752-2UK
M33 x 3.5
United States
V00752-2US
1 1/4" x 8
United States
V00752-3US
Comes with a single-phase 240 volt 0.75kW motor mounted below. VL200L SM 6SP Specifications Centre Height
200mm
Swing Over Bed
400mm
Distance Between Centres
1000mm
Work Height (Stand Bottom to Spindle Centre)
1145mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
6 Speeds
240, 534, 832, 1317, 1815, 2916 rpm
DNS School Germany Standard Accessories 1
Faceplate 100mm or 125mm
1
Live Centre
1
Tool Rests 300mm
1
10mm Knockout Bar
1
14mm Knockout Bar
1
Drive Dog
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Hole Through Tailstock Spindle
10.5mm
Quill Travel
75mm
1
Spanner
Net Weight
202kg
1
Vicmarc® Hat
Length x Width x Height (mm)
1660x790x1480
1
Owner’s Manual www.vicmarc.com
P13
VICMARC® MACHINERY PTY LTD
7.4 VL200S ASM EVS
The VL200 Short Adjustable Stand Mount EVS (electronic variable speed) lathes are suited to those wood turners who require superior performance and reliability. This lathe has similar features to the VL300 series but more compact in size. The electronic variable speed drive gives up to 200% torque on low rpm and the 1.5kw motor is more than adequate for this size lathe. The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work. The cast iron lathe is mounted on a 5mm thick steel plate stand, which has been designed with a 700mm wide footprint for stability and rigidity. The stand also features wood shaving discharge chute and a knee stop bar. Includes magnetic remote switch box that can be positioned anywhere where you are working.
3000(1:1)
938(1:3.2)
Includes magnetic remote switch box that can be positioned anywhere you are working.
2040(1:1.5)
Adjustable work height from 1070mm to 1370mm(Floor to centre of headstock spindle)
Headstock Pulley Maximum RPM
VL200S ASM EVS Specifications Centre Height
200mm
Swing Over Bed
400mm
Distance Between Centres
400mm
Work Height (Stand Bottom to Spindle Centre)
1070-1370mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
3 Speeds
(See Table)
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Hole Through Tailstock Spindle
10.5mm
Quill Travel
75mm
Net Weight
242kg
Length x Width x Height (mm)
1150x790x1480
Available in:
Digital Readout
Pulley Ratio 1:1
1: 1.5
1 : 3.2
3000
3000
2040
938
2500
2500
1700
782
2000
2000
1360
625
1500
1500
1020
469
1000
1000
680
313
500
500
340
156
250
250
170
78
100
100
68
31
30
30
20
9
Standard Accessories 1
Faceplate 100mm or 125mm
1
Live Centre
1
Tool Rests 300mm
Thread
Power Plug
Order Code
1
10mm Knockout Bar
M30 x 3.5
Australia
V00754-1AU
1
14mm Knockout Bar
M33 x 3.5
Europe
V00754-2EU
1
Drive Dog
M33 x 3.5
United Kingdom
V00754-2UK
1
Spanner
M33 x 3.5
United States
V00754-2US
1
Vicmarc® Hat
1 1/4" x 8
United States
V00754-3US
1
Owner’s Manual
P14
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
7.5 VL200L ASM EVS
3000(1:1)
2040(1:1.5)
938(1:3.2)
Includes magnetic remote switch box that can be positioned anywhere you are working.
Headstock Pulley Maximum RPM The VL200 Long Adjustable Stand Mount EVS (electronic variable speed) lathes are suited to those wood turners who require superior performance and reliability. This lathe has similar features to the VL300 series. The electronic variable speed drive gives up to 200% torque on low rpm and the 1.5kw motor is more than adequate for this size lathe. The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work. The cast iron lathe is mounted on a 5mm thick steel plate stand, which has been designed with a 700mm wide footprint for stability and rigidity. The stand also features wood shaving discharge chute and a knee stop bar. Includes magnetic remote switch box that can be positioned anywhere where you are working. Adjustable work height from 1070mm to 1370mm (Floor to centre of headstock spindle)
Available in: Thread
Power Plug
Order Code
M30 x 3.5
Australia
V00750-1AU
M33 x 3.5
Europe
V00750-2EU
M33 x 3.5
United Kingdom
V00750-2UK
M33 x 3.5
United States
V00750-2US
1 1/4" x 8
United States
V00750-3US
Digital Readout
Pulley Ratio 1:1
1: 1.5
1 : 3.2
3000
3000
2040
938
2500
2500
1700
782
2000
2000
1360
625
1500
1500
1020
469
VL200L ASM EVS Specifications
1000
1000
680
313
Centre Height
200mm
500
500
340
156
Swing Over Bed
400mm
250
250
170
78
Distance Between Centres
1000mm
100
100
68
31
30
30
20
9
Work Height (Stand Bottom to Spindle Centre)
1070-1370mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
1
Faceplate 100mm or 125mm
Spindle Bearings
Taper Roller
1
Live Centre
3 Speeds
(See Table)
1
Tool Rests 300mm
Toolrest Post Diameter
30mm
1
10mm Knockout Bar
Hole Through Headstock Spindle
15mm
1
14mm Knockout Bar
Hole Through Tailstock Spindle
10.5mm
1
Drive Dog
Quill Travel
75mm
1
Spanner
Net Weight
301kg
1
Vicmarc® Hat
Length x Width x Height (mm)
1660x790x1480
1
Owner’s Manual
Standard Accessories
www.vicmarc.com
P15
VICMARC® MACHINERY PTY LTD
7.6 VL200 SIT DOWN
400mm
Distance Between Centres
400mm
Work Height (Stand Bottom to Spindle Centre) tilted at 45° / 0°
750-900mm/ 950-1100mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
3 Speeds
(See Table)
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Hole Through Tailstock Spindle
10.5mm
Quill Travel
75mm
Net Weight
179kg
Length x Width x Height (mm)
1150x750x1250
Standard Accessories 1
Faceplate 100mm or 125mm
1
Live Centre
1
Tool Rests 300mm
1
10mm Knockout Bar
1
14mm Knockout Bar
1
Drive Dog
1
Spanner
1
Vicmarc® Hat
1
Owner’s Manual
Digital Readout
Available in:
3000(1:1)
Swing Over Bed
2040(1:1.5)
200mm
938(1:3.2)
VL200 Sit Down Specifications Centre Height
The VL200 Sit Down lathe has been designed to suit people in wheelchairs or for people who have trouble standing for a long period of time. The lathe comes complete with an electronic variable speed unit, a 1.5kW motor and a magnetic remote switch box that can be positioned anywhere where you are working. The stand can also be purchased separately to suit a VL200 Short bed Lathe (Stand Only - Part No. V01083) The stand is designed to be adjustable to suit many different applications and sizes. The adjustable legs allow up to 150mm height adjustment (every 25mm) and the pivoting bed allows a tilt angle from 0° to 45° (every 7.5°). The work height range from the floor to the centre of the spindle while the lathe is tilted at 45° is from 750mm to 900mm (for sit down operation) and when the lathe is horizontal (tilted at 0°) the height range is from 950mm to 1100mm (for standing operation).
Headstock Pulley Maximum RPM
Pulley Ratio 1:1
1: 1.5
1 : 3.2
3000
3000
965
938
2500
2500
804
782
2000
2000
643
625
1500
1500
483
469
1000
1000
322
313
500
500
161
156
250
80
78
Thread
Power Plug
Order Code
M30 x 3.5
Australia
V00757-1AU
M33 x 3.5
Europe
V00757-2EU
M33 x 3.5
United Kingdom
V00757-2UK
250
M33 x 3.5
United States
V00757-2US
100
100
32
31
1 1/4" x 8
United States
V00757-3US
30
30
10
9
P16
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
8. VL200 LATHE ACCESSORIES TOOLRESTS - (Post 30mm Diameter)
400mm
300mm
200mm
Part No. V01175
Part No. V01173
Part No. V01171
“S”
“Z”
Goblet
when looking from the top down the shape resembles an S
when looking from the top down the shape resembles a Z
Part No. V01181
Part No. V01183
Part No. V01179
CAMLOCK (Banjo)
1000mm and 600mm toolrest double posted Part No. V01168 (1000mm) Part No. V01177 (600mm)
FACE PLATES
100mm to 150mm faceplates are best suited for the VL200 lathe, however larger sizes are also available (see Page 33).
Part No. V00162 A separate Camlock can be purchased.It can be used on its own with another toolrest or in conjunction with a double toolrest
3 POINT STEADY VL200 50mm
Part No. V01093 12-50mm diameter work holding capacity, used to support work piece
3 POINT STEADY VL200 100mm
Part No. V01094 12-100mm diameter work holding capacity, used to support work piece www.vicmarc.com
P17
VICMARC® MACHINERY PTY LTD
9. VL300 LATHES 9.1 VL300S BM 3 SPEED
Available in:
VL300S BM Specifications Centre Height
300mm
Swing Over Bed
600mm
Distance Between Centres
500mm
Work Height (Bed Bottom to Spindle Centre)
452mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
3 Speeds
469, 1020, 1500 rpm
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Thread
Order Code
Hole Through Tailstock Spindle
10.5mm
M30 x 3.5
V00767-1
Quill Travel
75mm
M33 x 3.5
V00767-2
Net Weight
117kg
1 1/4" x 8
V00767-3
Length x Width x Height (mm)
1150x400x720
9.2
VL300L BM 3 SPEED
VL300L BM Specifications Centre Height
300mm
Swing Over Bed
600mm
Distance Between Centres
1300mm
Work Height (Bed Bottom to Spindle Centre)
452mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
3 Speeds
469, 1020, 1500 rpm
Toolrest Post Diameter
30mm
Thread
Order Code
10.5mm
M30 x 3.5
V00762-1
Quill Travel
75mm
M33 x 3.5
V00762-2
Net Weight
145kg
V00762-3
Length x Width x Height (mm)
1990x400x720
1 1/4" x 8
Standard Accessories for VL300S and VL300L BM 3 Speed
P18
1
Faceplate 150mm
1
Live Centre
1
Tool Rests 300mm
1
10mm Knockout Bar
1
14mm Knockout Bar
1
Drive Dog
1
Spanner
1
3 Step Motor Pulley
1
Vicmarc® Hat
1
Owner’s Manual
www.vicmarc.com
1500
15mm
Hole Through Tailstock Spindle
1020
Hole Through Headstock Spindle
469
Available in:
RPM on each step of the headstock pully (Based on a 1500rpm motor)
The VL300 BM series can be mounted on your own bench and comes with a 3 step motor pulley for use with your own motor (motor not included). The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work. The VL300 short bed version has an optional 500mm or 1000mm bolt on extension facility. By bolting the extension on to the end of the lathe, the distance between centres will either be 1000mm or 1500mm.
VICMARC® MACHINERY PTY LTD
VL300S ASM EVS
3000(1:1)
Includes magnetic remote switch box that can be positioned anywhere you are working.
2040(1:1.5)
The VL300 Short Adjustable Stand Mount EVS (electronic variable speed) lathe has been designed to suit most professional wood turners. The electronic variable speed drive gives up to 200% torque on low rpm and it comes with a powerful 2.2kw motor. The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work. The cast iron lathe is mounted on a 5mm thick steel plate stand, which has been designed with a 700mm wide footprint for stability and rigidity. The stand also features wood shaving discharge chute and a knee stop bar. The VL300 short bed version has an optional 500mm or 1000mm bolt on extension facility. By bolting the extension on to the end of the lathe, the distance between centres will either be 1000mm or 1500mm. Includes magnetic remote switch box that can be positioned anywhere where you are working. Adjustable work height from 1070mm to 1370mm (Floor to centre of headstock spindle)
938(1:3.2)
9.3
Headstock Pulley Maximum RPM
VL300S ASM EVS Specifications Centre Height
300mm
Swing Over Bed
600mm
Distance Between Centres
500mm
Work Height (Stand Bottom to Spindle Centre)
1070-1370mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
Spindle Bearings
Taper Roller
3 Speeds
(See Table)
Toolrest Post Diameter
30mm
Hole Through Headstock Spindle
15mm
Hole Through Tailstock Spindle
10.5mm
Quill Travel
75mm
Net Weight
296kg
Length x Width x Height (mm)
1150x790x1480
Available in:
Digital Readout
Pulley Ratio 1:1
1: 1.5
1 : 3.2
3000
3000
2040
938
2500
2500
1700
782
2000
2000
1360
625
1500
1500
1020
469
1000
1000
680
313
500
500
340
156
250
250
170
78
100
100
68
31
30
30
20
9
Standard Accessories 1
Faceplate 150mm
1
Live Centre
1
Tool Rests 300mm
Thread
Power Plug
Order Code
1
10mm Knockout Bar
M30 x 3.5
Australia
V00766-1AU
1
14mm Knockout Bar
M33 x 3.5
Europe
V00766-2EU
1
Drive Dog
M33 x 3.5
United Kingdom
V00766-2UK
1
Spanner
M33 x 3.5
United States
V00766-2US
1
Vicmarc® Hat
1 1/4" x 8
United States
V00766-3US
1
Owner’s Manual
www.vicmarc.com
P19
VICMARC® MACHINERY PTY LTD
9.4
VL300L ASM EVS
The VL300 Long Adjustable Stand Mount EVS (electronic variable speed) lathe has been designed to suit most professional wood turners. The electronic variable speed drive gives up to 200% torque on low rpm and it comes with a powerful 2.2kw motor. The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work. The cast iron lathe is mounted on a 5mm thick steel plate stand, which has been designed with a 700mm wide footprint for stability and rigidity. The stand also features storage space, wood shaving discharge chute and emergency knee stop bar. This machine is ideal for final work or any type of long projects. Includes magnetic remote switch box that can be positioned anywhere where you are working. Adjustable work height from 1070mm to 1370mm (Floor to centre of headstock) VL300L ASM EVS Specifications
3000 (1:1)
2040 (1:1.5)
938 (1:3.2)
Includes magnetic remote switch box that can be positioned anywhere you are working.
Headstock Pulley Maximum RPM
Available in: Thread
Power Plug
Order Code
M30 x 3.5
Australia
V00761-1AU
M33 x 3.5
Europe
V00761-2EU
M33 x 3.5
United Kingdom
V00761-2UK
M33 x 3.5
United States
V00761-2US
1 1/4" x 8
United States
V00761-3US
Digital Readout
Pulley Ratio 1:1
1: 1.5
1 : 3.2
3000
3000
2040
938
2500
2500
1700
782
2000
2000
1360
625
1500
1500
1020
469
1000
1000
680
313
500
500
340
156
250
250
170
78
100
100
68
31
30
30
20
9
Centre Height
300mm
Swing Over Bed
600mm
Distance Between Centres
1300mm
Work Height (Stand Bottom to Spindle Centre)
1070-1370mm
Indexing Holes
24
Headstock & Tailstock Spindle
No. 2 MT
1
Faceplate 150mm
Spindle Bearings
Taper Roller
1
Live Centre
(See Table)
3 Speeds
1
Tool Rests 300mm
Toolrest Post Diameter
30mm
1
10mm Knockout Bar
Hole Through Headstock Spindle
15mm
1
14mm Knockout Bar
Hole Through Tailstock Spindle
10.5mm
1
Drive Dog
Quill Travel
75mm
1
Spanner
Net Weight
397kg
1
Vicmarc® Hat
Length x Width x Height (mm)
1990x790x1480
1
Owner’s Manual
P20
www.vicmarc.com
Standard Accessories
VICMARC® MACHINERY PTY LTD
10. VL300 LATHE ACCESSORIES TOOLRESTS - (Post 30mm Diameter)
400mm
300mm
200mm
Part No. V01184
Part No. V01195
Part No. V01193
“S”
“Z”
Goblet
when looking from the top down the shape resembles an S
when looking from the top down the shape resembles a Z
Part No. V01201
Part No.V01203
Part No. V01199
CAMLOCK (Banjo)
1000mm and 600mm toolrest double posted Part No. V01187 (1000mm) Part No. V01197 (600mm)
FACE PLATES
100mm to 300mm faceplates are best suited for the VL300 lathe, however larger sizes are also available (see Page 33).
Part No. V00163 A separate Camlock can be purchased.It can be used on its own with another toolrest or in conjunction with a double toolrest
3 POINT STEADY VL300 50mm
Part No. V01095 8-50mm diameter work holding capacity, used to support work piece.
3 POINT STEADY VL300 330mm
Part No. V01097 12-300mm diameter work holding capacity, used to support work piece. www.vicmarc.com
P21
VICMARC® MACHINERY PTY LTD
10. VL300 LATHE ACCESSORIES VL300 Extension Bed 500mm
500mm Extension Bed can be attached to the VL300 Short with no support leg. Ideal for turning between centres, gives a total of 1000mm Between centres
500mm Extension Bed Part No. V00107
Precision-machined face for bolt on extension bed includes four bolts and two ground bushes.
VL300 Extension Bed 1000mm
The 1000mm bed extension for mounting on the VL300 short includes 4 x M14 high tensile bolts with two hardened bushes for accurate location. Also available heavy-duty stand and single support leg to accommodate extension bed. Extension Bed Part No. V00106
P22
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
10. VL300 LATHE ACCESSORIES SWING AWAY TAILSTOCK SYSTEM
This Swing Away Tailstock Support System was originally designed by Vicmarc® and due to popular demand we are happy to re-introduce this newly redesigned model. This will be suitable for all the existing VL300 short bed lathes. The swing away tailstock support system is ideal for turners who frequently remove the tailstock from the bed. Swing Away Tailstock Support System Part No. V01125
SEQUENCE OF OPENING
Step 1
Step 2
Make sure the latch is closed before moving the tailstock
Move tailstock to the end of support
Step 3
Open the latch. Note how the tailstock system is designed to perfectly mesh with the VL300 short bed lathes to provide extra strength.
Step 5 Step 4
Note the position of the tailstock. The hinge design has enabled the tailstock to swing out and back away from the lathe. This facilitates easy turning of hollow vessels. www.vicmarc.com
P23
VICMARC® MACHINERY PTY LTD
11. VL200/300 LATHE FEATURES
Magnetic Remote Switch Box that can be positioned anywhere you are working
Digital speed readout (EVS models only)
24 holes on headstock pulley for indexing and spindle locking
mm scale on Quill to facilitate reading the depth of drilling
Specially designed PVC motor mount bushes for reduced vibration to the headstock P24
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
12. SAFETY COLLAR All the Vicmarc® lathe models come with this unique locking system to stop faceplates and chucks from coming undone while outboard turning. An additional safety collar can be purchased for reverse turning on the inboard side. Part No. V00975
13. ADJUSTABLE HAND LEVERS Available in : Part No. P00396
Part No. (see table)
Part No. P00356
Part No. V00850
Thread Size
Order Code
M08 Female
P00396
M08 x 15
P00397
M08 x 20
P00398
M08 x 25
P00399
M08 x 30
P00400
M10 x 20
P00401
M10 x 30
P00402
M10 x 40
P00403
M12 x 20
P00404
M12 x 25
P00405
M12 x 40
P00406
40mm Star Hand Knob M8
P00356
Flat Knurled Nut M08 (for VL175)
V00850
14. TOOLREST COLLARS
Used to set a height on your toolrest allowing you to unlock the toolrest and swivel/move the toolrest without changing the set height. Collar Toolrest Available in Size
Order Code
25.4mm
V00300
30mm
V00301 www.vicmarc.com
P25
VICMARC® MACHINERY PTY LTD
15. DRIVE DOGS & LIVE CENTRES
Drive Dog MT2, 19mm
Live Centre MT2, Cup Live Centre MT2, Light Duty Cone Light Duty
Pro Live Centre MT2
Part No. V00342
Part No. V00271
Part No. V00261
Part No. V00268
Drive Dog MT2, 25mm Heavy Duty
Live Centre MT2, Cup Heavy Duty
Live Centre MT2, Cone Heavy Duty
Drive Dog Punch, 25mm
Part No. V00341
Part No. V00270
Part No. V00269
Part No. V00950
PRO LIVE CENTRE
DRIVE DOG PUNCH
Specially designed to discharge wood shavings when drilling through tailstock.
This accessory is designed to punch a drive dog impression on your stock piece of timber. This is done simply by holding the punch onto the timber and hammering the back. Using this tool will save you undue thrust on your lathe and live centre bearings.
DRIVE DOG THREADED
DRIVE DOG MULTI
Specially designed for salt and pepper shakers and candle holders.
This consists of 3 individually removable Drive Dogs, 18mm, 26mm and 42mm, with an adaptor, which takes a VM120/150, insert to suit a variety of spindle threads. Some direct threads are also available.
Available in: Thread
Part No.
M30 x 3.5
V00343-1
M33 x 3.5
V00343-2
1 1/4" x 8
V00343-3
P26
www.vicmarc.com
The three drive dogs screw onto a body each one to suite your type of work. Available in M33x3.5 (direct) and M45x2 (insert) thread sizes. M33x3.5 - Part No. V00344 M45x2 - Part No. V00345
VICMARC® MACHINERY PTY LTD
16. HOLLOWING TOOL SUPPORT Laser Pen (Optional)
Part No. V00475
The ultimate tool support system is the smoothest and easiest to use due to the use of sealed bearings in the support column and in each articulated joint. Unlike other gated tool support systems the only friction comes from just the tool in contact with the toolrest. It will accept tool diameters of 3/4”, 5/8”, 1/2” and 12mm. A laser wall thickness/depth gauge attachment without laser is included in the package as well as a tool post locking collar for setting the height of the tool post. It has a camlock base to fit the standard Vicmarc® bed ways to ensure fast and accurate set up and ease of maneuverability. All adjustments for height and reach are made using ratchet levers.
STANDARD ACCESSORIES 12 mm
12.7 mm
15.8 mm
This system accepts tool diameter shank 12mm, 12.7mm, 15.8mm and 19.05mm
Locking collars
17. GAUGES GAUGE MASTER CENTRE FINDER
THE MANTA
NEW SHARPENING AID The new release Manta Gauge Master was designed by Vicmarc® and DNS Germany. The advantages of the sharpening Manta are: • •
The Gauge Master was specially designed by Vicmarc® and DNS for wood turners to save time. This device incorporates angle checking and centre finding. Includes symbols as a guide for sharpening angles of various tools.
Part No. V00255
• •
•
Reduction of the edge angles to easy-toremember numbers. Reduction to 5 edge angles of woodturning tools with a clear classification via symbols. Two practical checking options for the edge angle: sighting and insertion. The shape of the tip of the tool is just as important as the bevel angle. The manta shows the correct profile of the most popular widths of spindle gouges i.e. 6, 10, 13 and 20mm. For skew chisels there is, in addition to being able to check the bevel angle, you are also able to check the Skew angle: 55 degrees or 77 degrees depending on your preference.
www.vicmarc.com
P27
VICMARC® MACHINERY PTY LTD
18. OUTBOARD TURNING Both the Tripod and the Outboard Turning Attachment have a 40mm diameter support post that is locked with indexed locking levers. These are very rigid outboard turning attachments and have swan necks to increase access to the work piece. The Vicmarc® Outboard turning attachments are available to facilitate large diameter turning on VL175 with the head swiveled through 90 degrees and outboard on the VL200 and VL300 series lathes. They can also be fitted to other makes of lathe, as long the headstock end of the bench or cabinet is flat.
OUTBOARD TURNING TRIPOD
OUTBOARD TURNING ATTACHMENT
46kg Net Weight Part No. V01210
33kg Net Weight Part No. V00861
19. SANDING TABLE
The V- Section can be used when drilling or centring square stock. When not in use, it can be easily removed from sanding table. Sanding disk (300 mm diameter) optional. Sanding Table Part No. V01140 Specifications
300mm Sanding Disk Available In
Length
200 mm
Thread
Order Code
Width
300 mm
M30 x 3.5
V00417-1
Shaft Size
30 mm or 1" Diameter
M33 x 3.5
V00417-2
V-Section
50 x 50 mm
1 1/4" x 8
V00417-3
P28
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
20 BALANCING SYSTEM The balancing system mounts on the outboard side of your lathe and is suited for out-of-round or offcentre work. Using the balancing system enables you to work with higher RPM. When removing stock you may occasionally have to rebalance your work by simply undoing the grub screws and turning the balancing weights to the desired position.
Balancing System Specifications Diameter
200mm
Thickness
25mm
Weight
7.7kg
Part No
Description
V00060-3
Balancing System 1¼" x 8
V00060-2
Balancing System M33 x 3.5
V00060-1
Balancing System M30 x 3.5
As shown in these pictures, the balancing system is used to counteract out of round weight distribution.
www.vicmarc.com
P29
VICMARC® MACHINERY PTY LTD
21. OVAL TURNING DEVICE VOD300 Oval turning is an old art of turning, it has been practiced since the middle ages. Professor Johannes Volmer was able to create a system for oval turning using tooth belts for smooth operation. Vicmarc® has re-engineered this device and simplified the operation and setup. From the website of Professor Johannes Volmer: “Ovalturning is an old challenging woodturning art. It was applied until the middle of the 20th century in frame manufactories. There were many such factories in European countries but nothing remained. In the USA the Old Schwamb Mill - a frame factory founded in 1864 by German immigrants - has been well preserved. It is a working museum with the19th century machines in action.
Adaptors for different thread spigots available
Ovalturning is of increasing interest for designers, artisans and restorers and for fans of woodturning looking for new challenging techniques. The ellipse is a curve of traditional charm. Classical applications are elliptical picture frames and mirror frames but also plates, bowls, boxes and keyhole plates (escutcheons).”
Oval Turning Device Available In Thread
Part No.
M30 x 3.5
V00870-1
M33 x 3.5
V00870-2
1 1/4" x 8
V00870-3
M40 x 2
V00870-4
1” x 8
V00870-6
Oval Bowl by Jack deVos Standard Accessories
P30
1
DVD Instruction Manual
1
C Spanner
1
18mm Spanner
1
13mm Spanner
1
7.9mm (5/16”) Tommy Bar
1
5mm T-Bar
1
Insert (VM90/100)
1
Clamping Assembly includes Clamping plate, bolt & washer
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
22. VACUUM CHUCKS & ACCESSORIES ROTATING UNIONS These devices have been designed as an aid to Woodturning. It Enables an item to be re-mounted on the lathe for finishing without risking further holding marks. The rotary adapter is fitted with two ball bearings and lets the lathe spindle turn freely while the hose, and connection remain stationary
Rotating Union 10mm inlet – to suit vacuum hose
Rotating Union 32mm inlet – to suit vacuum cleaner
Rotating Union M16 x 1.5 - to suit back of lathe.
Part No. V01216
Part No. V01217
Part No. V01215
These Rotating Unions have a dovetail pickup to suite a self-centring four jaw chuck and an internal thread (M45x2) to suite a chuck Insert (VM120/150). Two ball bearings prevent the hose from spinning.
Vacuum adaptor sleeve available to suite 35mm diameter vacuum cleaner nozzles Part No. V01016.
The Rotating Union M16 x 1.5 screws into the outboard side of the lathe and connects to the vacuum hose. Two ball bearings prevent the hose from spinning.
Martin Weinbrecht from DNS (Germany) using a 200mm Vacuum Cup with M16x1.5 Rotating Union on a VL300.
www.vicmarc.com
P31
VICMARC® MACHINERY PTY LTD
VACUUM CUPS
100mm
150mm
200mm
Part No. V01221
Part No. V01222
Part No. V01223
Precision machined cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The Vacuum cups can be used with any of the three rotating unions. The rotating unions (10mm inlet or 32mm inlet) can mount directly to the Vacuum Cups. Alternatively an insert can be mounted to the Vacuum Cups and the rotating union M16x1.5 is attached to the outboard side of the lathe
Vacuum Cup Screwed onto Rotating Union 10mm inlet, used with vacuum pumps
Vacuum Cup Screwed onto Rotating Union 32mm inlet, used with vacuum cleaners
Vacuum Cup Screwed onto Vicmarc® VM90/100 insert, used with Rotating Union M16 x 1.5
VACUUM PLATE
Vacuum Plate with rotating union 32mm inlet
Vacuum Plate only.
Part No. V01224
Part No. V01228
This unit consists of a 300mm diameter, foam covered plate and its fitted with a Rotating union M40x2 32mm inlet
Vacuum plate can also accept a VM90/100 insert and be mounted directly to the lathe spindle. The rotating union M16 x 1.5 is used with this configuration. It can be used with the Rotating union M40x2 10mm inlet (as shown).The Vacuum plate can also be purchased separately.
P32
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
23. SWIVEL HEAD SANDER
Combine this lightweight sander with the power of your shop vacuum to create an effective, nonaggressive sanding system that will reduce nuisance dust 25 to 50% in your workshop. Though not intended as a substitute for a respirator or proper dust filtration, this system will help keep your shop clean and make your time sanding more enjoyable. Includes a 45mm and a 75mm Velcro sanding pad. Requires a vacuum hose adapter for use. It can also be used simply as a sanding tool without the need for a vacuum. As it has an easily adjustable head (90°either side of centre) it can be customised to your suit your needs Features Adjustable head angle - Up to 180° Positive lock No spanner rquired Quickly change sanding pads Lightweight, impact resistant plastic Twin ball bearing design
Just unscrew handle 1/2 turn to adjust the position of the head Part No. V01131
Includes both 45 and 75mm sanding pads Backed by a lifetime guarantee (excluding sanding pad) For use with a vacuum cleaner or shop vacuum
45mm
Part No. V00980
Vacuum adaptor sleeve available to suite 35mm diameter vacuum cleaner nozzles
75mm
Part No. V00981
Part No. V01016
Replacement Velcro sanding pads available
24. FACEPLATES
300mm Aluminium faceplate Can also be used as a sanding disc by gluing velcro on the face
75, 100, 125, 150, 175 and 200mm faceplates available in cast iron. Faceplate
Faceplate thread sizes available
Size
Part No.
75mm
V00410
100mm
V00411
125mm
V00412
150mm
V00413
175mm
V00414
200mm
V00415
300mm Aluminium
V00417
Thread Size
Add after FacePlate Part No. to specify
M30 x 3.5
-1
M33 x 3.5
-2
1 1/4” x 8
-3
1” x 8
-6 (75 & 100mm only)
1” x 10
-7 (75 & 100mm only)
www.vicmarc.com
P33
VICMARC® MACHINERY PTY LTD
25. VM90 CHUCK The VM90 chuck is for those who prefer to operate the chuck using the quick- acting Tommy Bars (levers), which saves time when mounting and dismounting. The VM90's compact size makes it ideal for use on 300mm (12in) capacity lathes or smaller and is ideal for use with the Vicmarc® Bowl Jaws. On a lathe with a spindle lock only one Tommy bar needs to be used to close the jaws; the bar is pushed away from the operator. Basic chuck includes: 1 x Standard Jaws, 1 x 3mm T-Bar Allen Key, 1 x Woodscrew, 2 x 7.9mm Tommy Bars, and owner's manual. Insert type chuck - M40 x 2, Part No. V00281-4 Please note: for insert type chuck, an appropriate insert to fit your lathe is required (not included). Inserts are available for most threads. (see page 40)
VM90 Diameter 96mm. Net Weight 1.7kg Allows for 40mm of expansion on jaws.
26. VM100 CHUCK The VM100 T- Bar Allen Key operated chuck provides one- hand tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures consistent, smooth action by preventing dust and debris from getting into scroll of the chuck. The backing lid is also indexed for those wood turners who do not have indexing facility on their lathes. The VM100's compact size makes it ideal for use on 300mm (12in) capacity lathes or smaller. VM100 Diameter. 96mm. Net Weight 2.1kg Allows for 40mm of expansion on jaws.
Basic chuck includes: 1 x Standard Jaws, 1 x 3mm T-Bar Allen Key, 1 x 8mm T-Bar Allen Key, 1 x Woodscrew 1 x Owner's manual, 1 x 7.9mm Tommy Bar (M40 Only). Direct threaded chuck - M33 x 3.5, Part No. V00283-2 Insert type chuck - M40 x 2, Part No. V00283-4 Please note: for insert type chuck, an appropriate insert to fit your lathe is required (not included). Inserts are available for most threads.(see page 40)
P34
www.vicmarc.com
VICMARC® MACHINERY PTY LTD
27 VM120 CHUCK The VM120 T- Bar Allen Key operated chuck provides one- hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures consistent, smooth action by preventing dust and debris from getting into scroll of the chuck. The backing lid is also indexed for those wood turners who do not have indexing facility on their lathes. The VM120 will hold most work up to 500mm (20in) in diameter with standard jaws.
Basic chuck includes: 1 x Standard Jaws, 1 x 4mm Allen T-Bar Allen Key, 1 x 10mm T-Bar Allen Key, 1 x Woodscrew, 1 x Owner's manual, 1 x 9.5mm Tommy Bar (M45 Only) Direct threaded chuck - M33 x 3.5, Part No. V00285-2
VM120 Diameter. 125mm. Net Weight 3.9kg Allows for 50mm of expansion on jaws.
Insert type chuck - M45 x 2, Part No. V00285-5 Please note: for insert type chuck, an appropriate insert to fit your lathe is required (not included). Inserts are available for most threads. (see Page 41)
Stars within spheres turned by Christian Delhon on a VL300 Purple Gidgee, 70mm diameter.
www.vicmarc.com
P35
VICMARC® MACHINERY PTY LTD
28. VM150 CHUCK Features • INNOVATIVE AND PATENTED • DUAL ACTION opening and closing • Jaws and Inserts compatible with the VM120 • Stronger backing jaws • Can be used for turning in reverse • Backing Jaws will not protrude past Chuck Body for safety • Ideal for professional turners as a time saver
VM150 Diameter. 150mm. Net Weight 6.0kg Allows for 50mm of expansion on jaws.
The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to tighten using the 'T' key as you would in a standard key operated scroll chuck.
To switch from lever operated to key operated, line up the two dots as shown above, and rotate the locking pinion using the 10mm T-bar (supplied with the chuck). Turn clockwise to engage and anticlockwise to disengage.
Quick Action (Lever Operation)
Fine Adjustment (Once Locked)
SAFETY RING
Basic Chuck Includes: 1 x Standard Jaws, 1 x 4mm T-Bar Allen Key, 1 x 10mm T-Bar Allen Key,1 x Woodscrew, 1 x Owners Manual, 1 x 9.5mm Tommy Bar (M45 Only) Chuck available in sizes Direct Thread M33 x 3.5, Part No. V00289-2 Direct Thread 1 1/4" x 8, Part No. V00289-3 Insert Type M45 x 2, Part No. V00289-5 The VM150 chuck is 150mm (approx 6") in diameter and accepts the same jaws and inserts as a VM120 or a VM140. Please note: for insert type chuck, an appropriate insert to fit your lathe is required (not included). Inserts are available for most threads. (see Page 41) P36
www.vicmarc.com
Vicmarc® designed safety ring allows you to turn in reverse or outboard, without the chuck coming undone from the spindle. optional safety ring Part No. V00975
VICMARC® MACHINERY PTY LTD
29. ECCENTRIC CHUCK #3 The Vicmarc® Escoulen Chuck originally designed by Jean Francois Escoulen and manufactured by Vicmarc® expands the possibilities for off centre turning. The accessories also allow eccentric turning. The main feature of the chuck is its infinitely variable axis setting capacity. With the range of 0 to 30mm each setting gives a different turning axis. In addition to this the rotating cup chuck allows you to create an even wider variety of shapes, depending on the chosen axis. The optional ball chuck allows the work piece to be swiveled up to 15° off the z-axis for even more flexible turning. (See diagram)
Escoulen Chuck with standard accessories
The combination of several shapes on a single piece, without having to remove the work piece, enables the creative turner to make very personal and original pieces. Manufactured from K1045 (medium tensile steel - 45 tonne) the chucks have a higher durability ensuring a longer life and a very high quality finish, which is less susceptible to rust. Vicmarc® chucks are guaranteed for 12 months and a large variety of accessories are available to suit them.
Standard Accessories 1
Tommy bar 7.9mm
1
5mm Allen T-Bar
1
4mm Allen T-Bar
1
4mm Allen L-Bar
1
#3 Gauge
1
10mm Spanner
1
40mm Cup Chuck
1
Owner’s Manual
Offset Adjustment
Center Position
Maximum Offset (30mm)
Standard accessories allow off centre turning