Operator Logo ZXMP S385 V2.50 Product Description ZXMP S385 V2.50 Product Description ZXMP S385 V2.50 Product Descri
Views 197 Downloads 4 File size 1MB
Operator Logo
ZXMP S385 V2.50 Product Description
ZXMP S385 V2.50 Product Description
ZXMP S385 V2.50 Product Description Version
Date
Author
Approved By
Remarks
R0
2009-09-20
ZhangQiSheng
WangQiang,QinYong
Not open to the Third Party
R1
2010-05-20
LiXiongFei
WangQiang,QinYong
Not open to the Third Party
© 2011 ZTE Corporation. All rights reserved. ZTE CONFIDENTIAL: This document contains proprietary information of ZTE and is not to be disclosed or used without the prior written permission of ZTE. Due to update and improvement of ZTE products and technologies, information in this document is subjected to change without notice.
ZTE Confidential Proprietary
© 2011 ZTE Corporation. All rights reserved.
I
ZXMP S385 V2.50 Product Description
TABLE OF CONTENTS 1
Overview ................................................................................................................... 1
2 2.1 2.2 2.3 2.4 2.5 2.6
Features .................................................................................................................... 2 Flexible networking & dispatching function raises profit-making ability and reduces CAPEX ...................................................................................................................... 2 Superior scalability protects CAPEX and reduces OPEX .......................................... 2 Leading RPR function supports IP evolution and protects CAPEX ............................ 2 Powerful embedded WDM function saves fiber resource .......................................... 2 Flexible design facilitates network planning & optimization........................................ 2 Wide application, mature technology and high reliability............................................ 2
3 3.1 3.2 3.2.1 3.2.2 3.2.3 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12
Functions.................................................................................................................. 4 Cross-connection and extension capabilities ............................................................. 4 Powerful Service Access Ability................................................................................. 4 Optical Interfaces ...................................................................................................... 4 Electrical Interfaces ................................................................................................... 5 Data Interfaces .......................................................................................................... 5 Integrated WDM Function .......................................................................................... 6 Complete Equipment Protection Ability...................................................................... 6 Perfect Network Protection Ability ............................................................................. 7 Reliable Timing Synchronization Processing ............................................................. 7 System control and communication ........................................................................... 8 Overhead Processing ................................................................................................ 8 Easy For Maintenance And Upgrade ....................................................................... 10 Alarm input/output ................................................................................................... 10 System power supply .............................................................................................. 10 Perfect EMC and Operation Safety ......................................................................... 11
4 4.1 4.1.1 4.1.2 4.2 4.3
System Architecture .............................................................................................. 12 Product Physical Structure ...................................................................................... 12 System architecture ................................................................................................. 12 System mapping structure ....................................................................................... 13 Hardware Architecture ............................................................................................. 14 Software Architecture .............................................................................................. 15
5 5.1 5.1.1 5.1.2 5.1.3 5.2 5.3 5.4 5.5 5.6 5.7 5.7.1 5.7.2 5.7.3 5.7.4 5.7.5 5.8
Technical Specifications ....................................................................................... 17 Physical Indices ....................................................................................................... 17 Subrack and cabinet appearance ............................................................................ 17 Subrack backplane .................................................................................................. 18 Fan plug-in box ........................................................................................................ 18 Appearance and dimensions ................................................................................... 19 System subrack and slot diagram ............................................................................ 21 System board list and description ............................................................................ 22 STM-N optical interfaces performance .................................................................... 26 PDH interfaces performance and indexes ............................................................... 27 Performance of data boards .................................................................................... 29 Performance of SEE ................................................................................................ 29 Performance of TGE2B ........................................................................................... 29 Performance of RSEB ............................................................................................. 31 Performance of AP1×8 ............................................................................................ 32 Performance of TGSA×8 ......................................................................................... 33 Physical Performance of Ethernet ........................................................................... 33
II
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
5.8.1 5.8.2 5.9 5.10 5.11 5.12 5.13 5.14 5.14.1 5.14.2 5.14.3 5.14.4 5.14.5 5.14.6 5.15
Ethernet interface types and followed standard ....................................................... 33 GE interface types and followed standard ............................................................... 36 Performance of OAD ............................................................................................... 38 Performance of OBA ............................................................................................... 39 Performance of OPA ............................................................................................... 40 Performance of DCM ............................................................................................... 41 Error Performance ................................................................................................... 42 Jitter index at interfaces ........................................................................................... 42 Jitter and wander tolerance of PDH input interface.................................................. 42 Jitter and wander tolerance of SDH input interface.................................................. 44 Inherent output jitter of STM-N interface .................................................................. 46 Mapping jitter of PDH tributary................................................................................. 47 Combined Jitter ....................................................................................................... 47 Jitter transfer function of the regeneration relay....................................................... 48 Clock timing and synchronous characteristics ......................................................... 48
6 6.1 6.2 6.3 6.3.1 6.3.2 6.3.3 6.3.4 6.3.5 6.4
Environment Adaptability...................................................................................... 51 Power supply requirements ..................................................................................... 51 Grounding requirements .......................................................................................... 51 Environment requirements ...................................................................................... 52 Operation Environment ............................................................................................ 52 Environment for Storage .......................................................................................... 53 Cleanness requirements .......................................................................................... 54 Bearing Requirements of the Equipment Room....................................................... 54 Electronic Static Discharge (ESD) ........................................................................... 55 Safety requirements ................................................................................................ 57
7
Glossary ................................................................................................................. 60
ZTE Confidential Proprietary
© 2011 ZTE Corporation. All rights reserved.
III
ZXMP S385 V2.50 Product Description
FIGURES Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14
ZXMP S385 functional block diagram ........................................................................ 12 Appearance of S385 Sub-rack................................................................................... 13 Multiplexing/mapping structure adopted by ZXMP S385 ........................................... 13 Functional relationships of the hardware platforms .................................................... 14 Hierarchical structure diagram of NM software .......................................................... 16 Subrack structure diagram......................................................................................... 17 Structure of fan box ................................................................................................... 18 Fan box structure....................................................................................................... 19 Board slot layout of sub-rack ..................................................................................... 22 The jitter and wander tolerance at E1 PDH input interface ........................................ 43 The jitter and wander tolerance at T1 PDH input interface ........................................ 43 The jitter tolerance of STM-N terminal multiplexer input interface.............................. 45 The input jitter tolerance of STM-N SDH regenerator ................................................ 46 The jitter transfer characteristics of a regeneration relay ........................................... 48
TABLES Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18 Table 19 Table 20 Table 21 Table 22 Table 23 Table 24
IV
Optical Interfaces Provided by ZXMP S385 ................................................................. 5 Electrical Interfaces Provided by ZXMP S385 ............................................................. 5 Ethernet services Provided by ZXMP S385 ................................................................. 6 Equipment level protection provided by ZXMP S385 ................................................... 7 Overhead-Byte Usage List........................................................................................... 9 Dimensions and weights of structural parts ............................................................... 19 ZXMP S385 own configuration .................................................................................. 20 ZXMP S385 is configured with other products ........................................................... 20 Boards/unit list (with power consumption) ................................................................. 22 Performance of the STM-1 optical interface............................................................... 26 Performance of the STM-4 optical interface............................................................... 26 Performance of the STM-16 optical interface............................................................. 26 Performance of the STM-64/OTU2 optical interface of ZXMP S385 .......................... 27 Performance of the PDH electrical interface .............................................................. 27 Input port permitted attenuation, frequency deviation and output port signal bit rate tolerance.................................................................................................................... 28 Requirements for the input/output port reflection attenuation .................................... 28 Performance of TGE2B of ZXMP S385 ..................................................................... 30 Ethernet interface index ............................................................................................. 33 Transmission index of FE MMF optical interface ....................................................... 34 Receiver index of FE MMF optical interface .............................................................. 34 index of FE short distance SMF optical interface ....................................................... 35 receiver index of FE short distance optical interface .................................................. 35 Transmission index of FE long distance SMF optical interface .................................. 35 Receiver index of FE long distance optical interface ................................................. 36
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Table 25 Table 26 Table 27 Table 28 Table 29 Table 30 Table 31 Table 32 Table 33 Table 34 Table 35 Table 36 Table 37 Table 38 Table 39 Table 40 Table 41 Table 42 Table 43 Table 44 Table 45 Table 46 Table 47 Table 48 Table 49 Table 50 Table 51 Table 52 Table 53 Table 54 Table 55 Table 56 Table 57 Table 58 Table 59 Table 60 Table 61 Table 62 Table 63 Table 64 Table 65 Table 66 Table 67
GE interface index ..................................................................................................... 36 Transmission index of GE MMF optical interface ....................................................... 36 Receiver index of GE MMF optical interface .............................................................. 37 Transmission index of GE short distance SMF optical interface ................................ 37 Receiver index of GE short distance optical interface ................................................ 37 Transmission index of FE long distance SMF optical interface .................................. 38 Receiver index of GE long distance optical interface ................................................. 38 Performance of OADD ............................................................................................... 39 Performance of OADC ............................................................................................... 39 Performance of OBA Module ..................................................................................... 40 Performance of OPA Module ..................................................................................... 40 Performance of the DCM ........................................................................................... 41 SDH system error performance ................................................................................. 42 The input jitter and wander tolerance of PDH interface.............................................. 43 The output jitter and wander tolerance of the PDH interface ..................................... 44 Input jitter and wander tolerance (UIP-P) of SDH ...................................................... 45 Input jitter and wander tolerance of the SDH ............................................................. 45 Input jitter tolerances of STM-N regenerators ............................................................ 46 STM-N interface inherent output jitter indexes of SDH .............................................. 46 STM-N network interface output jitter indexes of SDH ............................................... 47 Mapping jitter specifications....................................................................................... 47 Combined jitter .......................................................................................................... 47 Jitter transmission parameters of a regeneration relay .............................................. 48 The SEC Index list ..................................................................................................... 49 The wander limit value under constant temperature (MTIE) ...................................... 49 The wander limit value under temperature impact (MTIE) ......................................... 49 The wander limit value under constant temperature (TDEV) ..................................... 49 Climate requirement .................................................................................................. 52 Density requirements for chemical active substances ............................................... 52 Density requirements for mechanical active substances ........................................... 53 Requirements for mechanical stress.......................................................................... 53 Climate requirement .................................................................................................. 53 Requirements for mechanical stress.......................................................................... 54 Static discharge anti-interference .............................................................................. 55 RF electromagnetic radiated susceptibility ................................................................ 55 Electrical fast transient burst susceptibility at the DC power port ............................... 56 Electrical fast transient burst susceptibilities at the signal cable and control cable ports .......................................................................................................................... 56 Surge susceptibility of DC power ............................................................................... 56 Surge susceptibility of the outdoor signal cable ......................................................... 56 Surge susceptibility of the indoor signal cable ........................................................... 56 Conductivity susceptibility of RF field......................................................................... 57 Conductive emission electromagnetic interference at the direct current port ............. 57 Radioactive emission electromagnetic interference ................................................... 57
ZTE Confidential Proprietary
© 2011 ZTE Corporation. All rights reserved.
V
ZXMP S385 V2.50 Product Description
1
Overview ZXMP S385 is an optical transmission platform newly released by ZTE. ZXMP S385 targets the backbone or large capacity convergent layer of network which can satisfy present and future network requirements. It is an ideal transmission system in constructing broadband transmission networks. ZXMP S385 provides rich service access functions and complete protection mechanism, facilitating its wide applications. ZXMP S385 adopts modular design, incorporating SDH, Ethernet, ATM, PDH and other technologies. It can transmit voice and data services efficiently on the same platform. This document is based on ZXMP S385 V2.50.
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
1
ZXMP S385 V2.50 Product Description
2
Features
2.1
Flexible networking & dispatching function raises profit-making ability and reduces CAPEX It has high-integration service interface boards to access a lot of PDH, SDH and data services.
2.2
Superior scalability protects CAPEX and reduces OPEX ZXMP S385 can be constantly evolved and upgraded. The user will just add or replace boards to expand the network capacity, which will reduce CAPEX of the expansion project.It adapts itself to the characteristics of metro services to maximize the equipment investment return of clients.
2.3
Leading RPR function supports IP evolution and protects CAPEX It has powerful data service processing function. It supports two rings working at the same time, unicast/multicast/broadcat services and bandwidth statistical multiplexing. It features high bandwidth utilization rate, fast service provision, service priority access control and fair mechanism and high QOS. It supports the RPR multi-ring spanning in the networking and avoids service termination & conversion to reduce faulty points.
2.4
Powerful embedded WDM function saves fiber resource It can add/drop wavelength-level optical signals.
2.5
Flexible design facilitates network planning & optimization The boards can be inserted into any slot and flexible design facilitates service configuration, maintenance and network planning & optimization.
2.6
Wide application, mature technology and high reliability
2
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Due to mature technology and superior performance, ZXMP S385 is widely deployed in major carriers and private networks as well as other countries and regions, e.g., Korea, Pakistan, Morocco and Vietnam.
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
3
ZXMP S385 V2.50 Product Description
3
Functions
3.1
Cross-connection and extension capabilities Cross Clock board (CSF/CSE/CSA) of ZXMP S385 provides the cross-connect function and fulfill the straight-through, broadcast, add/drop, and cross-connection of services. CSF board implements high-order and low-order cross-switching functions. CSF has a space-division switching capacity of 1536 × 1536 VC4. In which, 256×256 VC4s are assigned to the time-division cross-connect service unit, the others are allocated to the space-division cross-connect unit of the system. CSE board implements high-order and low-order cross-switching functions. CSE has a space-division switching capacity of 1152 × 1152 VC4. In which, 256×256 VC4s are assigned to the time-division cross-connect service unit, the others are allocated to the space-division cross-connect unit of the system. CSA board implements high-order and low-order cross-switching functions. CSA has a space-division switching capacity of 256 × 256 VC4. In which, 32×32 VC4s are assigned to the time-division cross-connect service unit, the others are allocated to the spacedivision cross-connect unit of the system. The equipment can supports maximum 14 service slots and access a large amount of PDH, SDH and data services. It can process 176-path ECC, and support the network topologies as linear, ring, hinge, ring with chain, tangent ring and cross ring of STM-N levels meeting the complex networking requirements thoroughly.
3.2
Powerful Service Access Ability ZXMP S385 adopts modular structure, with its hardware including cross-connect card, clock card, control card, service card and service interface card. The service access capacity is shown in following table. A single sub-rack of ZXMP S385 has 14 slots for service boards and 10 slots for interface boards. The equipment can access a large amount of PDH, SDH and data services at one time.
3.2.1
Optical Interfaces ZXMP S385 provides five types of optical interfaces: OTU2, STM-64, STM-16, STM-4 and STM-1, as shown in Table 1 .
4
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Table 1
Optical Interfaces Provided by ZXMP S385
Board Type
Rate (Mbit/s)
Board Integration (channel/board)
Maximum Access Quantity
OTU2
10709.225
1
14
STM-64
9953.280
1/2
14/28
STM-16
2488.320
4/8
56/72
STM-4
622.080
1/2/4
56
STM-1
155.520
2/4/8/16
208
ZXMP S385 has the one-interface OTU2 optical line board to support AFEC or G.709 standard FEC function. By increasing the line rate, the board can correct the bit errors in the line transmission. It may increase the receiving sensitivity by about 2dB or the OSNR tolerance by 5-7dB, and work with OBA+OPA and Dispersion Compensation Module (DCM) to implement the LH transmission without electrical regeneration. ZXMP S385 also provides OTU2/STM-64/STM-16 colored interfaces comply with ITU-T G.692 and ITU-T G.695, which can be connected to DWDM/CWDM directly without the OTU board. ZXMP S385 provides OTU2/STM-64/STM-16 DWDM wavelength interface with ITU-T standard 50GHz grid in C-band.
3.2.2
Electrical Interfaces ZXMP S385 provides STM-1 electrical interface and PDH electrical interfaces, as listed in Table 2 Table 2
3.2.3
Electrical Interfaces Provided by ZXMP S385
Board Type
Rate (Mbit/s)
Board Integration (channel/board)
Maximum Access Quantity
STM-1
155.520
4/8/16
208
E3
34.368
6
96
T3
44.736
6
96
E1
2.048
63
1260
T1
1.544
63
1260
Data Interfaces There are several data boards in ZXMP S385 V2.50:SEE,TGE2B, RSEB, AP1×8 and TGSA×8, as shown in Table 3 . SEE board provide 8×10M/100M+2×GE Ethernet services which support L2 switching function and EPS protection function. TGE2B board provides 2×GE adaptive Ethernet services.
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
5
ZXMP S385 V2.50 Product Description
RSEB board provides 8×10M/100M+2×GE interfaces which employs the bandwidth of SDH/MSTP ring network to provide the dual-ring topology and implement the ring interconnection of RPR nodes. FE Ethernet interfaces of each Ethernet board above can be optical or electrical. It provides FE optical interface via ESFE×8 and optical interface via OIS1×8 respectively. 10M/100M optical or electrical interfaces are available via replacing interface board. AP1×8 board is mainly used to converge or aggregate ATM service to SDH transmission network. It provides 8×155 Mbit/s optical interfaces at the ATM side and 1×622 Mbit/s non-concatenation data flow at the system side. TGSA×8 board supports 8 user interfaces which adopt SFP optical module. The first 4 user interfaces may respectively offer GE or SAN service. SAN service includes 1G Fiber Channel and 1G FICON services. The other 4 user interfaces may offer 4×GE services. Table 3
3.3
Ethernet services Provided by ZXMP S385
Board Name Interface Type
Board Integration (channel/board)
Maximum Access Capacity
SEE
8×10M/100 M +2×GE
8+2
128+32
TGE2B
2×GE
2
56
RSEB
8×10M/100 M +2×GE
8+2
128+32
AP1×8
8×155 Mbit/s
8
112
TGSA×8
(4×SAN+4×GE) or 8×GE
(4+4) or 8
(56+56) or 112
Integrated WDM Function ZXMP S385 has OAD (Optical Add/Drop) board to add/drop or multiplex/demultiplex 4 fixed-wavelengths of optical signals. OAD board consists of two types in all: OADD is for DWDM signals and OADC is for CWDM signals. ZXMP S385 optical line board has DWDM or CWDM optical interfaces, and OAD board can add/drop DWDM or CWDM optical signals. Both of them work together to actualize OAD interface function. ZXMP S385 single sub-rack supports at most 56 channels of DWDM OAD interfaces or 56 channels of CWDM OAD interfaces. ZXMP S385 V2.50 extension sub-rack can support at most 56 channels of DWDM OADM interfaces or 56 channels of CWDM OADM interfaces.
3.4
Complete Equipment Protection Ability Table 4 shows the equipment level protection of ZXMP S385.
6
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Table 4
Equipment level protection provided by ZXMP S385
Items protected
Protection scheme
E1/T1 processing board
1:N (N≤9) tributary protection switching (TPS)
E3/T3 processing board
1:N (N≤4) TPS
STM-1 processing board(except OEL1×16 board)
1:N (N≤4) TPS
FE board
1:N (N≤4) TPS
CSF/CSE/CSA(Cross-switch and Synchronous-clock board)
1+1 hot backup
NCP/ENCP board
1+1 hot backup
–48 V power interface board
1+1 hot backup
ZXMP S385 supports the co-existence of several different TPS protection. ZXMP S385 adopts a dual-bus hierarchical design for service bus, overhead bus and clock bus, which improves system reliability and stability.
3.5
Perfect Network Protection Ability In terms of the network level protection, ZXMP S385 supports multiplex section protection (MSP) ring, linear MSP, unidirectional path switched ring (UPSR), subnet connection protection (SNCP) and logical subnet protection (LSNP), etc. ZXMP S385 can implement all networking features recommended by ITU-T. It supports the route reconstruction of Ethernet and IP, and meets IEEE802.3E.
3.6
Reliable Timing Synchronization Processing The clock timing/synchronization unit is composed of Cross Clock board (CSF/CSE/CSA) and SCI board. The unit completes system timing and network synchronization. It implements the following functions: •
Providing system clock signals and system frame header signals for all the units of the SDH equipment.
•
Providing overhead bus clock and frame header
•
Providing the corresponding interface for upper-level controller to configure and monitor the clock unit.
SCI board of ZXMP S385 provides four external reference clock output and four external reference clock input. The interface type is 2Mbit/s or 2MHz. SCI can be configured with four external 2.048M clock input references and 28 lines (or tributary) 8K timing input references. Synchronization can select external clocks, line clocks or E1/T1 tributary clocks.
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
7
ZXMP S385 V2.50 Product Description
The protection switching of clock reference sources bases on the alarm information and clock synchronization status message (SSM) algorithm-based automatic switching. ZXMP S385 provides E1 tributary re-timing function. It supports synchronous priority switching based on the SSM algorithm, optimizes synchronous timing distribution of the network, prevents the occurrence of timing loops and keeps network synchronization the optimal status. A software-controlled or a hardware phase lock circuit is used to implement four working modes: a. Fast pull-in; b. Locked; c. Holdover; d. Free run.
3.7
System control and communication The Net Control Processor (NCP) and Enhanced Net Control Processor (ENCP) implement the system control and communication function, which includes sending the configuration commands to all MCUs via S interface and collecting their performance and alarm information. With ENCP, the extension subrack can be accessed. NM information intercommunicates between NEs via the ECC channel. The order-wire board (OW) performs the order-wire function. It actualizes the intercommunication of order-wire phones between NEs via E1 and E2 bytes. It employs an independent CPU for order-wire and communicating with NCP processor via S interface. The Qx interface board is the communication interface between NE and subnet management control center (SMCC). With Qx interface, NCP/ENCP can report to SMCC the alarm and performance information of the NE and subnet and receive the commands and configurations sent from SMCC to the NE and subnet. The f interface is the LMT access interface of local NM, which is for the access management of portable PC. The reset and ring trip are on the rack. Other interfaces are on QXI and SCI boards. The NCP/ENCP boards monitor the fan plug-box of the NE. The power distribution unit performs the over/under voltage monitoring of input voltage. The alarm I/O: the NCP/ENCP boards offers 8-path external alarm switch quantity interfaces, collects the alarm signal of NE and transmits it to the alarm box and the firstcabinet-in-a-row. It offers 2-path switch quantity (UC) interface and may output 2-path switch quantity for user.
3.8
Overhead Processing The overhead process of ZXMP S385 is performed by NCP/ENCP board, OW board, CSF/CSE/CSA board, optical line boards and ATM board. ZXMP S385 supports overhead transparent transmission, i.e. low rate service signal and overhead can transfer transparently in STM-16 frame. It greatly improves the network
8
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
construction flexibility, abates the tension of insufficient optical fiber resources, and ensures the NM integrity and the NM information continuity.Overhead-Byte Usage List is show in Table 5 . Table 5
Overhead-Byte Usage List
Overhead type
Overhead name
ZXMP S385 application
A1, A2
Frame position indication for regeneration section, A1:11110110,A2:00101000
J0
S385 may identify, set and transparent transmit J0 byte
Z0
Not applied
D1~D12
S385 may set DCC of D1~D3 or D1~D12, and support the transparent transmission of D1~D12
E1, E2
S385 supports E1, E2 order wire telephone, as well as E1, E2 transparent transmission.
F1
S385 provides F1 64kbps co-directional data interface, and the transparent transmission of F1 byte
B1
Used for the error code monitor of regeneration section
B2
Used for the error code monitor of MS
K1, K2
Used for the auto-protection switchover (APS) command of MS
S1
b5~b8 used for synchronous status message
M1
Used for MS far-end difference indication
AU PTR
The rate adjustment on AU level
J1
Used for high-order path trace, able to be set
B3
Used for path error code monitoring
C2
Used for expressing the composition or maintenance status of VC-3/VC-4/VC-4X, able to read and write
G1
Used for returning the status and performance of path terminal to the path origin of VC3/VC4/VC4XC
F2, F3
Not applying
H4
Affording the general position indication to payload, as well as the special payload Position (i.e. H4 may be the multi-frame position indication of VC12 and VC2); and performing VC3/VC4 virtual concatenation
K3
Not applied
N1
Not applied
V5
Providing the functions of error code test, signal mark and channel status for VC1/VC2
J2
VC1, VC2 path trace byte, able to be set
N2
Not supported
RSOH/MSOH
AU pointer
POH
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
9
ZXMP S385 V2.50 Product Description
Overhead type
3.9
Overhead name
ZXMP S385 application
K4
Used for the virtual concatenation process of low-order path
Easy For Maintenance And Upgrade With the following functions, the system becomes more reliable, featuring good maintainability and easy scalability:
3.10
•
It supports optical power monitoring functions.
•
It supports online loading and remote upgrading of card software (including FPGA logic).
•
It provides the daily maintenance function. In case of a fault, it can quickly locate the fault to the card level.
•
All cards provide the temperature monitoring function.
•
Pluggable optical module (SFP module, LC connector).
Alarm input/output NCP/ENCP provides 8 external alarm Boolean value input interfaces and two control output interface. NCP/ENCP collects alarm indication signals from NEs and sends them to the alarm box and the first cabinet of the line. There are four alarm output interfaces. The system provides two user alarm output interfaces and level alarms. It shares a DB9 interface with F1 interface at the backplane side.
3.11
System power supply ZXMP S385 equipment employs the dual-power system to access the -48V power in the equipment room and distributes the -48V DC power in the power distribution box. It adopts separate power supply mode. No power boards in the sub-rack, the -48V power directly powers each board via the MB board through a DC/AC conversion module. Two lines of independent external -48V DC power supply, -48VGND and the system protection GND are led from the connectors on the distribution frame and then connected to the sub-rack power distribution board. The power distribution (PD) board provides the equipment with the following functions such as -48V power switch, distribution, isolation, EMI filtering, protection against lightening and surge, fan power supply and control
10
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
3.12
Perfect EMC and Operation Safety EMC, operation safety and fire/explosion protection of the equipment are fully considered in the circuit board design.
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
11
ZXMP S385 V2.50 Product Description
4
System Architecture
4.1
Product Physical Structure
4.1.1
System architecture ZXMP S385 functional block diagram is shown in Error! Reference source not found. Figure 1
ZXMP S385 functional block diagram
ZXMP S385 SDH Based Multi-Service Node Equipment
SDH Equipment (TM, ADM, REG)
ZXONM E300 EMS/SNMS
Security management
Maintenance management
Performance management
Fault management
Configuration management
System management
Sverice Acess Platform
Power Support Platform
Overhead Processing Platform
Sverice Crossconnect Platform
Clock Processing Platform
NE Control Platform
Hardware System
NE Management Software System
In terms of functional hierarchy, ZXMP S385 can be divided into hardware system and network management (NM) software system, which are independent of each other and work coordinately. The hardware system is the main body of the ZXMP S385. It can work independently of the NM software system. A standard "IEC cabinet + sub-rack" structure is used for ZXMP S385. Both the cabinet and sub-rack unit are designed in the principle of “front-facing installation and maintenance” to save equipment space and allow for back-to-back installation, frontfacing operations and maintenance. Appearance of S385 Sub-rack is show in Figure 2 .
12
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Figure 2
4.1.2
Appearance of S385 Sub-rack
System mapping structure ZXMP S385 adopts the latest mapping structure of ITU-T recommendation, as shown in Figure 3. Figure 3
Multiplexing/mapping structure adopted by ZXMP S385
×N
STM-N
×1
AUG
AU-4
VC-4 ×3
Pointer processing
TUG-3
×1
TU-3
×7
VC-3 C-3
44736kbit/s 34368kbit/s
C-12
2048kbit/s
C-11
1544kbit/s
TUG-2 ×3
Multiplexing
TU-12
VC-12
Alignment Mapping
VC-11
Note: In above mapping structure, ZXMP S385 V2.00 and above version supports E1/T1, E3/T3, STM-1 (optical/electrical), STM-4, STM-16, STM-64 and Ethernet services. V2.20
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
13
ZXMP S385 V2.50 Product Description
and later versions support SAN service. The service enters STM-N via AU-4 multiplexing/mapping route instead of AU-3 multiplexing/mapping route. T1 service supports VC11-TU12 mapping route.
4.2
Hardware Architecture With the “platform” design concept, the ZXMP S385 hardware system consists of the NE control platform, clock processing platform, service cross platform, overhead processing platform, power supply support platform and service access platform. By means of platform establishment, transplant and integration, ZXMP S385 forms different functional units or boards, which are connected in a specific way to form the SDH equipment with perfect functions and flexible configurations. ZXMP S385 can be configured as a TM, ADM, or REG equipment, depending on the networking requirements. Configurations of REG at rates of 2.5G and 10G are available in V2.00 and above version. The relationships of all the platforms are shown in Figure 4 Figure 4
Functional relationships of the hardware platforms
Service access platform
Service crossconnect platform
. . .
Clock processing platform
. . .
. . .
Overhead processing platform
Power supply support platform
1
Service access platform
. . .
NE control platform
NE control platform As the interface between NE equipment and background NMS, the NE control platform is the agent for other platforms to receive or report network management information.
2
Power supply support platform With the distributed power supply style, power supply modules installed in each board provide power to corresponding boards.
3
14
Service access platform
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
This platform supports the access of SDH, PDH, Ethernet, ATM and SAN services. It converts accessed services to corresponding formats, and then forwards them to the service cross platform for aggregation and distribution. 4
Overhead processing platform This platform provides orderwire voice channel and some auxiliary data digital channels through section overhead (SOH) bytes while transmitting payloads.
5
Clock processing platform As one of the core part of the hardware system, this platform provides the system clock for all platforms in the equipment.
6
Service cross platform This platform receives service signals and various information from service access platform and overhead processing platform, and implements service orientation and information aggregation/distribution/switching. ZXMP S385 backplane uses the unified service bus, clock bus, overhead bus and control bus, and adopts the star structure centered on cross and clock board.
4.3
Software Architecture ZXMP S385 employs ZXONM E300 to manage and monitor the hardware system and transmission network, and coordinate the work of the transmission network. 1
Brief introduction to NM structure ZXONM E300 system adopts four-layered structure, including equipment layer, NE layer, NE management layer and sub-network management layer. It can also provide Corba interface for the network management layer. The hierarchical structure of ZXONM E300 system is shown in Figure 5 .
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
15
ZXMP S385 V2.50 Product Description
Figure 5
2
Hierarchical structure diagram of NM software
NE management scope ZXONM E300 features forward and backward compatibility, capable of managing all SDH-based multi-service node equipments. ZXONM E300 V3.19 supports management of ZXMP S385 V2.50 version.
3
Function introduction It can perform NE-layer network management functions such as configuration management, fault management, performance management, security management, system management, and maintenance management. Please refer to relevant documentation of ZXONM E300 for details of NMS.
16
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
5
Technical Specifications
5.1
Physical Indices
5.1.1
Subrack and cabinet appearance The subrack adopts 19” high rack with dimension of 888.2mm (height) ×482.6mm (width) ×270mm (depth). It consists of side panels, beams and metal guide rails, with the functions of heat dissipation and shielding. At the bottom of the subrack is a separate fan plug-in box equipped with 3 independent fan module boxes, each fan module box separately connects to fan backplane to facilitate maintenance. At the top of the subrack a decoration door featuring decoration, ventilation and shielding functions can be detached flexibly. ZXMP S385 Subrack structure diagram is show in Figure 6 . Figure 6
Subrack structure diagram
1. Top outlet 2. Decoration door 3. Board area 4. Lower cabling area 5. Fan plug-in box The subrack consists of four parts: 1
Backplane: the carrier for boards, connects ZXMP S385 to the connection interface of external signals. The boards are connected to the buses via the board connection sockets on the backplane.
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
17
ZXMP S385 V2.50 Product Description
2
Plug-in board area: it is dual-layer structure used to install ZXMP S385 boards.
3
Fan plug-in box: located at the bottom of the subrack, it provides forced air cooling for the equipment to dissipate heat.
The rear part of ZXMP S385 is equipped with one left and one right mounting lugs which are used to fix the equipment subracks in the cabinet. ZXMP S385 subrack adopts back fixing installation mode, it can be fixed in the cabinet from the front without obstructing cable layout, satisfying requirements for front-facing installation, front-facing maintenance, against wall and back-to-back installation of equipment cabinet. ZXMP S385 cabinet is 19” cabinet compliant with ETSI standards. It is made of excellent steel plate and features good electromagnetic shielding and heat dissipation performances.
5.1.2
Subrack backplane ZXMP S385 backplane is fixed at the subrack, serving the carrier for connecting all the boards. It is divided into upper and lower parts, in which, the upper part connects various functional interface boards, and the lower part connects various functional boards. The backplane contains service bus, overhead bus, clock bus, board-in-position bus, connects all the boards, equipment and external signals via interfaces and sockets. Backplane adopts unified arrangement of bus arrays of payload services, auxiliary services, internal board-to-board communication and clock, thus ensures the equipment to add boards with various types of interfaces according to customer’s requirements.
5.1.3
Fan plug-in box The structure of the fan plug-in box of the ZXMP S385 is shown in Figure 7. Three independent fan boxes are installed in the fan plug-in box, the structure of fan box is shown in Figure 8. Each fan module is electrically connected to the fan backplane via the socket at the back of the box. The fan box features independent locking function. It has running and alarm indicators on the front panel. Figure 7
Structure of fan box
1.Fan box mounting bracket 2. Fan box
18
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Figure 8
Fan box structure
1. Fan box 2. Fan 3. Indicator 4. Button switch The fan system of ZXMP S385 is the component for cooling and heat dissipation. Each subrack contains a fan backplane and three independent fan units side by side. Each fan unit is composed of a fan box, a fan and a FAN board. The FAN board is control by ENCP and provides rotation-blocking signal for ENCP monitor. The FAN board controls the fan operation if the FAN board loses contact with ENCP.
5.2
Appearance and dimensions Dimensions and weight indexes of structural parts of ZXMP S385 are shown in Table 6 Table 6
Dimensions and weights of structural parts
Dimension (mm)
Weight (kg)
2000 (height)×600 (width)×300 (depth)
70
2200 (height)×600 (width)×300 (depth)
80
2600 (height)×600 (width)×300 (depth)
90
ZXMP S385 sub-rack
888.2mm (height)×482.6mm (width)×270mm (depth)
25
Power distribution box
132.5 (height)×482.6 (width)×269.5 (depth)
5
Fan plug-in box
43.6mm (height)×436mm (width)×245mm (depth)
--
Dustproof plug-in box
43.6mm (height)×482.6mm (width)×250 (depth)
2
Ventilation unit
43.6mm (height)×482.6mm (width)×250 (depth)
3
Upper cabling area
133 mm (height)×482.6mm (width)×250mm (depth)
--
Cross-connect clock board (CSA/CSE/CSF)
PCB: 320 (height)×210 (depth)×2 (depth) Front panel: 345.6 mm (height) × 8 HP (width)
--
Structural part
ZXMP S385 cabinet
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
19
ZXMP S385 V2.50 Product Description
Structural part
Dimension (mm)
Weight (kg)
Service interface board and ENCP, OW
PCB: 277.8mm (height)×160mm (depth)×2mm (width) Front panel: None
--
Service board (lower layer boards of subrack)
PCB: 320mm (height)×210mm (depth)×2mm (width) Front panel: 345.6 mm (height)×5HP (width)
--
Note: The cabinet weight is the weight of an empty cabinet. 1HP=5.08 mm ZXMP S385 offers cabinets with height of 2000mm, 2200mm and 2600mm. Subrack, the core component, is installed in ZXMP S385 cabinet. A 2000mm-high cabinet can accommodate only one subrack. A 2200mm- or 2600mm-high cabinet can accommodate one or two subracks. Various functions of the equipment can be realized via different configurations of subrack boards. In accordance with current situation of transmission cabinet, overall structure layout can be classified into 3 scenarios based on cabinet height, which are shown in Table 7 ,Table 8 . Table 7
ZXMP S385 own configuration
Cabinet height
Power distribution box
Subrack
2.0m (with effective height of 42U)
3U
20U+1U (subrack and cabling area+dustproof plug-in box)
2.2m (with effective height of 47U)
3U
20U+1U+1U+20U+1U (2 subracks and cabling area+2 dustproof plug-in boxes+1 ventilation unit)
2.6 m (with effective height of 56U)
3U
20U+1U+1U+20U+1U (2 subracks and cabling area+2 dustproof plug-in boxes+1 ventilation unit)
Table 8
ZXMP S385 is configured with other products
Cabinet height
2.0m (with effective height of 42U)
2.2m (with effective height of 47U)
20
Power distribution box
Subrack
3U
ZXMP S385 (20U+2U)+ ZXMP S320 (4U+1U)
3U
ZXMP S385 (20U+2U)+ ZXMP S330 (10U+3U)
3U
ZXMP S385 (20U+2U)+ ZXMP S320 (4U+1U)
3U
ZXMP S385 (20U+2U)+ ZXMP S330 (10U+3U)
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Cabinet height
2.6m (with effective height of 56U)
Power distribution box
Subrack
3U
ZXMP S385 (20U+2U)+ ZXMP S320 (4U+1U)
3U
ZXMP S385 (20U+2U)+ ZXMP S330 (10U+3U)
3U
ZXMP S385 (20U+2U)+ ZXMP S360 (21U+2U)
3U
ZXMP S385 (20U+2U)+ ZXMP S390 (23U+2U)
“+1U”,”+2U”,”+3U” in the table are space reserved for dustproof, ventilation and cabling.
5.3
System subrack and slot diagram ZXMP S385 sub-rack includes board, fan plug-in box and dustproof unit. Structure of sub-rack is shown in Figure 9. The plug-in board area of ZXMP S385 is separated into 2 layers, where, the top layer is for interface boards with 15 slots and the low layer is for functional boards with 16 slots. The sub-rack bottom contains a 1U fan plug-in box that contains three fans working independently.
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
21
ZXMP S385 V2.50 Product Description
Figure 9
5.4
Board slot layout of sub-rack
System board list and description Common board name (code), applying rule and unit power consumption of ZXMP S385 are shown in Table 9 .The maximum input current of subrack is 16A. Table 9
22
Boards/unit list (with power consumption)
Board
Board name and configuring explanation
Power Consum ption in Common Temperat ure (25 ) (W)
Max. Power Consum ption (45 ) (W)
Weight (Kg)
NCP
Net Control Processor, 1 for standard configuration, 2 able to practice 1+1 protection
4.8
5
0.44
ENCP
Enhanced Net Control Processor, 1 for standard configuration, 2 able to practice 1+1 protection
9.6
9.9
0.46
OW
Order-wire
5.3
5.4
0.47
QxI
Qx interface 1 for standard configuration
3.9
4.1
0.52
CSA
Cross-switch and Synchronous-clock (256x256 VC4 high order with 32x32 VC4 low order)
27.4
28.2
1.14
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Board
Board name and configuring explanation
Power Consum ption in Common Temperat ure (25 ) (W)
CSF
Cross-switch and Synchronous-clock (1440x1440 VC4 high order)
32.4
33.4
1.46
TCS64
Cross-switch with low-order
17.3
17.8
0.56
TCS128
Cross-switch with low-order
36.5
37.6
0.95
TCS256
Cross-switch with low-order
60.5
62.3
0.98
SCIB
B-type clock interface board (2Mbit/s)
3.9
4.0
0.51
SCIH
H-type clock interface board (2MHz)
4.4
4.5
0.61
OL64FE C
Optical Line of out2, with L-64.2cIf, L64.2c IIf or L-64.2pf. Supports FEC function
25
27.3
1.12
OL64
Optical Line of STM-64, with S-64.2b, L-64.2cI, L-64.2cII, P1L1-2D2 or L64.2p.
28.8
31.2
0.95
OL64x2
STM-64×2 optical line board. Optical module types configurable include S64.2b, L-64.2c1, L-64.2c2 and L64.2p. Refer to ECC information for details.
31.9
34.3
1.12
OL16
Optical Line of STM-16, with S-16.1, L-16.2, L-16.2JE, L-16.2U or L-16.2P
14.9
16.3
0.65
OL16×4
Optical Line of STM-16×4, with S16.1, L-16.2 or L-16.2U
23.6
28.3
1.30
OL16×8
STM-16×8 optical line board. Optical module types configurable include S16.1, L-16.2, L-16.2u and L-16.2p. Refer to ECC information for details.
33.5
38.2
1.43
OL4×2
Optical Line of STM-4×2
10.1
10.4
0.70
OL4×4
Optical Line of STM-4×4
16.8
17.3
0.74
OL1×4
Optical Line of STM-1×4
8.9
9.2
0.74
OL1×8
Optical Line of STM-1×8
14.4
14.8
0.80
OEL1×16
Optical Line/Electrical Line Process of STM-1×16
18.1
18.6
0.87
OEIS1x8
Optical /Electrical interface of STM1×8
6.4
6.4
0.38
LP1×4
Line Process of STM-1×4, used together with electric interface switchover board or bridge board
5.8
6
0.65
LP1×8
Line Process of STM-1×8, used together with electric interface switchover board or bridge board
5.8
6
0.68
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
Max. Power Consum ption (45 ) (W)
Weight (Kg)
23
ZXMP S385 V2.50 Product Description
Board name and configuring explanation
Power Consum ption in Common Temperat ure (25 ) (W)
Max. Power Consum ption (45 ) (W)
Weight (Kg)
4-path STM-1 electric interface switchover board, used for interface slot
Before switchove r 0.5, after switchove r 8.2
Before switchove r 0.6, after switchove r 8.4
0.40
ESS1×8
Electrical Interface of STM-1×4
Before switchove r 0.5, after switchove r 8.2
Before switchove r 0.6, after switchove r 8.4
0.47
EP3×6
Electrical Process of E3/T3×6
12.5
12.9
0.71
ESE3×6
Electrical Interface Switching of E3/T3×6
Before switchove r 0.5, after switchove r 5.3
Before switchove r 0.6, after switchove r 5.4
0.40
BIE3
Bridge Interface of STM1e/E3/T3/FE,used for the interface slot corresponding to protection board
0.5
0.6
0.37
EPE1×63 (75Ω)
Electrical Process of E1×63 (75Ω)
19
19.6
0.81
EIE1×63( 75Ω)
Electrical Interface of E1×63 (75Ω)
0.5
0.6
0.36
ESE1×63 (75Ω)
Electrical Interface Switching of E1×63 (75Ω)
Before switchove r 0.5, after switchove r 21.6
Before switchove r 0.6, after switchove r 22.2
Before switcho ver 0.6, after switcho ver 8.4
EPE1×63 (120Ω)
Electrical Process of E1×63 (120Ω)
19
19.6
0.83
EPT1×63 (100Ω)
Electrical Process of T1×63 (100Ω)
15.4
15.8
0.81
EIT1×63
Electrical Interface of T1×63 (100Ω) or E1×63 (120Ω)
0.5
0.6
0.35
Electrical Interface Switching of T1×63 (100Ω) or E1×63 (120Ω)
Before switchove r 0.5, after switchove r 21.1
Before switchove r 0.6, after switchove r 21.8
0.54
Board
ESS1×4
EST1×63
24
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Board
Board name and configuring explanation
Power Consum ption in Common Temperat ure (25 ) (W)
BIE1
Bridge Interface of E1/T1
0.5
0.6
0.39
SEE
Enhanced Intelligent Ethernet Processing Board(48:1),customer side 8×FE(optical or electrical)+2×GE
26.4
27
0.75
RSEB
Embedded RPR Ethernet Processing Board, customer side 8×FE(optical or electrical)+2×GE
29.4
30.3
0.98
AP1×8
8×155Mbit/s optical board at the ATM side and 1×622Mbit/s nonconcatenation data flow at the system side.
24.1
24.9
0.85
TGE2B
GE transparent process board
19.1
19.7
0.73
TGSA×8
SAN service processing board, customer side 4×SAN+4×GE or 8×GE
36.5
37.6
0.99
OIS1×8
Optical interface board cooperating with Ethernet board RSEB
7.0
7.2
0.45
OEIFEx8
Optical /electric interface board cooperating with SEE board
8.5
8.5
0.45
ESFE×8
Ethernet electric board cooperating with Ethernet board including RSEB/SEE
0.6
0.7
0.38
OADD
Optical add/drop unit board for 4 channels of fixed wavelength DWDM optical signals.
4
4.1
0.75
OADC
Optical add/drop unit board for 4 channels of fixed wavelength CWDM optical signals.
3.5
3.6
0.75
FAN
Fan board
4.2
4.3
0.36
OBA12
Optical Booster Amplifier board(12dBm) built-in
6.1
11.6
1.15
OBA14
Optical Booster Amplifier board(14dBm), built-in
6.1
11.6
1.15
OBA17
Optical Booster Amplifier board(17dBm), built-in
6.1
11.6
1.15
OBA19
Optical Booster Amplifier board(19dBm), built-in
6.1
11.6
1.15
OPA32
Optical Pre-Amplifier(-32dBm), builtin
4.8
10.3
1.18
OPA38
Optical Pre-Amplifier(-38dBm), builtin
4.8
10.3
1.18
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
Max. Power Consum ption (45 ) (W)
Weight (Kg)
25
ZXMP S385 V2.50 Product Description
5.5
STM-N optical interfaces performance Performance of the OTU2/STM-64/16/4/1 optical interfaces is shown in Table 10 ,Table 11 ,Table 12 ,Table 13 . Table 10
Performance of the STM-1 optical interface
Nominal bit rate
155520kbit/s
Classification code
S-1.1
L-1.1
L-1.2
Working wavelength (nm)
1310
1310
1550
Source type
MLM
SLM
SLM
Min transmitting optical power (dBm)
-15
-5
-5
Max transmitting optical power (dBm)
-8
0
0
Minimum extinction ratio (dB)
8.2
10
10
Poorest sensitivity (dBm)
-28
-34
-34
Minimum overload point (dBm)
-8
-10
-10
Transmitter at reference point S G.957-compliant
Optical path between Point S and R Receiver at reference point R
Table 11
Performance of the STM-4 optical interface
Nominal bit rate
622080kbit/s
Classification code
S-4.1
L-4.1
L-4.2
Working wavelength (nm)
1310
1310
1550
Source type
MLM
SLM
SLM
Min transmitting optical power (dBm)
-15
-3
-3
Max transmitting optical power (dBm)
-8
2
2
Minimum extinction ratio (dB)
8.2
10
10
Poorest sensitivity (dBm)
-28
-28
-28
Minimum overload point (dBm)
-8
-8
-8
Transmitter at reference point S Optical path between Point S and R
G.957-compliant
Receiver at reference point R
Table 12
26
Performance of the STM-16 optical interface
Nominal bit rate
2488320kbit/s
Classification code
S16.1
L16.2
L16.2JE
L16.2P
L16.2U
Working wavelength (nm)
1310
1550
1550
1550
1550
Source type
SLM
SLM
SLM
SLM
SLM
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Nominal bit rate
2488320kbit/s
Min transmitting optical power (dBm)
-5
-2
+2
-2
-2
Max transmitting optical power (dBm)
0
3
5
3
3
Minimum extinction ratio (dB)
8.2
8.2
8.2
8.2
8.2
Poorest sensitivity (dBm)
-18
-28
-28
-28
-28
Minimum overload point (dBm)
0
-9
-9
-9
-9
Transmitter at reference point S Optical path between Point S and R
G.957-compliant
Receiver at reference point R
Table 13
Performance of the STM-64/OTU2 optical interface of ZXMP S385
Nominal bit rate
9953280kbit/s
10709225kbit/s
Classification code
S64.2b
L64.2c1
L64.2c2
P1L12D2
P1L1-2D2
Working wavelength (nm)
1550
1550
1550
1550
1550
Source type
SLM
SLM
SLM
SLM
SLM
Min transmitting optical power (dBm)
-1
-2
3
0
0
Max transmitting optical power (dBm)
2
2
6
4
4
Minimum extinction ratio (dB)
8.2
8.2
8.2
9
9
Poorest sensitivity (dBm)
-14
-22
-22
-24
-24
Minimum overload point (dBm)
-1
-9
-9
-7
-7
Transmitter at reference point S Optical path between Point S and R
G.709compliant
G.691 or G.959.1-compliant
Receiver at reference point R
5.6
PDH interfaces performance and indexes Performance of PDH electrical interfaces is shown as Table 14 . Table 14
Performance of the PDH electrical interface
Type
1544 kbit/s
2048 kbit/s
34368 kbit/s
44736 kbit/s
155520 kbit/s
Code pattern
AMI or B8ZS
HDB3 code
HDB3 code
B3ZS code
CMI code
G.703complia nt
G.703complia nt
G.703complian t
G.703complian t
G.703compliant
Bit rate of signals at output port Attenuation tolerance at input port ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
27
ZXMP S385 V2.50 Product Description
1544 kbit/s
Type
2048 kbit/s
34368 kbit/s
44736 kbit/s
155520 kbit/s
-
-
-
Frequency deviation tolerance at input port Anti-interference capability of input port
Permitted input port attenuation, permitted frequency deviation and output port signal bit rate tolerance are listed in the following Table 15 . Table 15 Input port permitted attenuation, frequency deviation and output port signal bit rate tolerance
Interface rate
Permitted input port frequency deviation(regular squared attenuation)
Permitted input port frequency deviation
Output port rate tolerance
1544kbit/s
--
Greater than ±32ppm
Less than ±32ppm
2048 kbit/s
0dB~6dB, 1024kHz
Greater than ±50ppm
Less than ±50ppm
34368 kbit/s
0dB~12dB, 17,184kHz
Greater than ±20ppm
Less than ±20ppm
44736 kbit/s
--
Greater than ±20ppm
Less than ±20ppm
155520 kbit/s
0dB~12.7dB, 78MHz
Greater than ±20ppm
Less than ±20ppm
•
Reflection attenuation at the input/output ports For input/output port reflection attenuation index of various electronic ports of ZXMP S385, please refer to Table 16 .
Table 16
Requirements for the input/output port reflection attenuation
Interface bit rate
2048Kbit/s input port
34368Kbit/s input port 155520Kbit/s input/output port •
Test frequency range
Reflection attenuation (dB)
51.2kHz~102.4kHz
12
102.4kHz~2048kHz
18
2048kHz~3072kHz
14
860kHz~1720kHz
12
1720kHz~34368kHz
18
34368kHz~51550kHz
14
8MHz~240MHz
15
Anti-interference capability of the input port The ratio of main signals to interference signals is 18dB.
28
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
•
Output port waveform The output port Recommendation.
•
waveform
complies
with
template
specified
in
G.703
Over-voltage protection of the input and output interfaces The input and output interfaces must bear 10 continuous standard pulses (5 positive and 5 negative) without being damaged. The rising time of a standard pulse is 1.2μs, the width is 50μs and the voltage amplitude is 20V.
5.7
Performance of data boards There are several data boards in ZXMP S385 V2.50:SEE, TGE2B, RSEB, AP1×8 and TGSA×8.
5.7.1
5.7.2
Performance of SEE •
Providing 8×10M/100M+2×GE interfaces.
•
Support 48×VCG. VCG mapping mode may be VC-12-Xv/VC-3-Xv/VC-4-Xv. VCG supports at most 1.25G bandwidth.
•
The total mapping bandwidth of SDH backplane is 1.25Gbps.
•
Support E-Line, E-Tree and E-LAN services.
•
Configure S-VLAN according to port or customer CE-VLAN.
•
Support Ethernet OAM to facilitate fault locating and performance inspection.
•
Support GFP RDI-CSF alarm.
•
Support Ethernet access rate control and DifferServ.
•
Support EPS protection.
•
Support port dispatching fairness of best-effort service.
Performance of TGE2B TGE2B board provides 2×GE adaptive Ethernet services.The performance is show as Table 17 .
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
29
ZXMP S385 V2.50 Product Description
Table 17
Performance of TGE2B of ZXMP S385
Characteristics of Ethernet board
Explanation of board function
Property sort
Board name
TGE2B
Ethernet port characteristics
1000BASE-SX/LX
Connector
LC
QTY of board interface
2
Port work mode (rate, full duplex and auto-negotiation)
Support
Optical module able to plug
Support
Ethernet port
Interface mode
Front-outlet on panel
Remote download and upgrade
Support
Max. Port QTY at system SDH side (WAN port)
2 2.5G
Total backplane mapping bandwidth
Virtual concatenation
VC3 Virtual concatenation
Support (The delay supported by VC3 is 8ms. The board adopts the V3-AU3-AUG mode and the mapping is not made via VC4. Some problems occur in the interconnection with other vendors’ equipment and in the test. The interconnection and test adopt VC4 instead of VC3. )
VC4 Virtual concatenation
Support (The delay tolerance supported by VC4 is 8ms.)
Dynamic VCG bandwidth increase/decrease, no damage with service
Support (The dynamic service bandwidth adjustment leads to 100ms loss. There is no problem in the function and interconnection.)
LCAS management functions (enable, alarm, event report)
Support
Multi-path protection of VCG level, protecting time TU-3->AU-4 mapping path.
•
Support LCAS protocol and complies with G.7042.
5.8
Physical Performance of Ethernet
5.8.1
Ethernet interface types and followed standard Ethernet interface index is show in Table 18 . Table 18
Ethernet interface index
Type
Rate (bps)
followed standard
Interface type
interface
10BASE-T
10M
IEEE 802.3
Electronic interface
RJ45, category 3 UTP
100BASE-TX
100M
IEEE 802.3u
Electronic interface
RJ45, category 3 UTP
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
33
ZXMP S385 V2.50 Product Description
Type
Rate (bps)
followed standard
Interface type
interface
100BASE-FX
100M
IEEE 802.3u
M-1.1/S-1.1/L-1.1
SFP-LC
All optical interface indices are described as following table. 1
FE MMF optical interface(M-1.1) FE MMF optical interface(M-1.1)as show in Table 19 ,Table 20 .
Table 19
Transmission index of FE MMF optical interface
Item
62.5/125μm MMF
Transmission unit type
MMF LD
Transmission distance
≤2
Interface
SFP-LC
Unit KM
Wavelength (λ, range)
1270~1380
nm
Trise/Tfall (maximum;10%~90%)
3
ns
RMS spectrum width (maximum)
63
nm
Output optical power (maximum)
-14
dBm
Output optical power (minimum)
-20
dBm
Output optical power when the LD is shut down (maximum)
-45
dBm
Extinction ratio (minimum)
10
dB
Table 20
Receiver index of FE MMF optical interface
Item
62.5/125μm MMF
Unit
Wavelength(λ, range)
1270~1380
Nm
input optical power (maximum)
-14
dBm
Receiver sensitivity
-30
dBm
2
FE short distance SMF optical interface(S-1.1) FE short distance SMF optical interface(S-1.1) as show in Table 21 ,Table 22
34
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Table 21
index of FE short distance SMF optical interface
Item
10/125μm SMF
Transmission unit type
SMF LD
Transmission distance
≤15
Interface type
SFP-LC
Wavelength(λ, range)
1261~1360
nm
Trise/Tfall (maximum;20%~80%)
2.5
ns
RMS spectrum width(maximum)
7.7
nm
output optical power(maximum)
-8
dBm
output optical power(minimum)
-11.5
dBm
Output optical power when the LD is shut down(maximum)
-45
dBm
Extinction ratio(minimum)
9
dB
Table 22
Unit KM
receiver index of FE short distance optical interface
Item
10/125μm SMF
Unit
Wavelength (λ, range)
1261~1360
nm
Input optical power (maximum)
-8
dBm
Receiver sensitivity
-31
dBm
3
FE long distance SMF optical interface(L-1.1) FE long distance SMF optical interface(L-1.1) as show in Table 23 ,Table 24 .
Table 23
Transmission index of FE long distance SMF optical interface
Item
10/125μm SMF
Transmission unit type
SMF LD
Transmission distance
≤40
Interface type
SFP-LC
Wavelength (λ,range)
1261~1360
nm
Trise/Tfall (maximum; 20%~80%)
2.5
ns
RMS spectrum width (maximum)
3
nm
output optical power(maximum)
0
dBm
output optical power(minimum)
-5
dBm
Output optical power when the LD is shut down(maximum)
-45
dBm
Extinction ratio (minimum)
10
dB
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
Unit KM
35
ZXMP S385 V2.50 Product Description
Table 24
5.8.2
Receiver index of FE long distance optical interface
Item
10/125μm SMF
Unit
Wavelength (λ range)
1261~1360
Nm
Input optical power (maximum)
-9
dBm
Receiver sensitivity
-34
dBm
GE interface types and followed standard GE interface index is show in Table 25 . Table 25
GE interface index
Type
Rate(bps)
followed standard
Interface type
interface
1000BASE-SX
1000M
IEEE 802.3z
M-1.8
SFP-LC
1000BASE-FX
1000M
IEEE 802.3z
S-1.1 or L-1.2
SFP-LC
All optical interface indices are described as following table. 1
GE MMF optical interface(M-1.8) GE MMF optical interface(M-1.8) as show in Table 26 ,Table 27 .
Table 26
36
Transmission index of GE MMF optical interface
Item
62.5/125μm MMF
Transmission unit type
MMF LD
Transmission distance
275
Interface
SFP-LC
Unit m
Wavelength (λ, range)
830~860
nm
Trise/Tfall (maximum;10%~90%)
0.26
ns
RMS spectrum width(maximum)
0.85
nm
Output optical power(maximum)
-4
dBm
Output optical power(minimum)
-9.5
dBm
Output optical power when the LD is shut down(maximum)
-35
dBm
RIN(maximum)
-117
dB/Hz
Extinction ratio(minimum)
9
dB
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Table 27
Receiver index of GE MMF optical interface
Item
62.5/125μm MMF
Unit
Wavelength(λ,range)
770~860
nm
input optical power(maximum)
0
dBm
Receiver sensitivity
-17
dBm
Minimum return loss
12
dB
Intensified receiving sensitivity (maximum)
-12.5
dBm
2
GE short distance SMF optical interface(S-1.1) GE short distance SMF optical interface(S-1.1) as show in Table 28 ,Table 29 .
Table 28
Transmission index of GE short distance SMF optical interface
Item
10/125μm SMF
Unit
Transmission unit type
SMF LD
Transmission distance
≤10
Interface type
SFP-LC
Wavelength(λ,range)
1270~1355
nm
Trise/Tfall (maximum;20%~80%)
0.26
ns
RMS spectrum width(maximum)
2.8
nm
KM
output optical power(maximum)
-3
dBm
output optical power(minimum)
-9.5
dBm
Output optical power when the LD is shut down(maximum)
-35
dBm
Extinction ratio(minimum)
9
dB
RIN(maximum)
-120
dB/Hz
Table 29
Receiver index of GE short distance optical interface
Item
10/125μm SMF
unit
Wavelength (λ ,range)
1270~1355
nm
Input optical power (maximum)
-3
dBm
Receiver sensitivity
-20
dBm
Intensified receiving sensitivity (maximum)
-14.4
dBm
3
GE long distance SMF optical interface(L-1.2) GE long distance SMF optical interface(L-1.2)as show in Table 30 ,Table 31 .
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
37
ZXMP S385 V2.50 Product Description
Table 30
Item
10/125μm SMF
Transmission unit type
SMF LD
Transmission distance
≤80
Interface type
SFP-LC
Wavelength (λ,range)
1540~1570
nm
Trise/Tfall (maximum;20%~80%)
2.5
ns
RMS spectrum width (maximum)
0.16
nm
output optical power(maximum)
5
dBm
output optical power(minimum)
0
dBm
Output optical power when the LD is shut down(maximum)
-45
dBm
Extinction ratio(minimum)
9
dB
RIN(maximum)
-120
dB/Hz
Table 31
5.9
Transmission index of FE long distance SMF optical interface
Unit Km
Receiver index of GE long distance optical interface
Item
10/125μm SMF
Unit
Wavelength(λ,range)
1270~1600
nm
Input optical power(maximum)
0
dBm
Receiver sensitivity
-22
dBm
Intensified receiving sensitivity (maximum)
-14.5
dBm
Performance of OAD OAD board consists of OADD and OADC. •
OADD can add/drop 4 wavelengths of DWDM optical signals. These 4 wavelengths are among C-band 40 wavelengths.
•
OADC can multiplex/demultiplex 4 wavelengths of CWDM optical signals and 1 channel of 1310nm optical signal. These 4 wavelengths are 1471/1491/1511/1531nm or 1551/1571/1591/1611nm.
•
OADD/OADC can be upgraded. With board cascading, it can multiplex/demultiplex 8 wavelengths of optical signals.
•
OAD board may process the control commands from NM to make the online upgrade of board software.
Performance of OADD and OADC are show in Table 32 ,Table 33 .
38
© 2011 ZTE Corporation. All rights reserved.
ZTE Confidential Proprietary
ZXMP S385 V2.50 Product Description
Table 32
Performance of OADD
Item
Unit
Frequency Range
Min
Max
THz
192.1
196.0
Wavelength Range
nm
1529.55
1560.61
Channel Spacing
GHz
100
0.5 dB Passband
nm
±0.11
-
20dB Passband
nm
-
1.20
In-drop
dB
2.5
3.3
Add-out
dB
2.5
3.3
In-out
dB
-
2.4
dB
-
1.0
Insertion Loss
Insertion Loss Uniformity
Table 33
Performance of OADC
Item
Unit
Channel Number
Parameter 6
5
4
Central wavelength
nm
1471/1491/1511/ 1531
1471/1491/15 11/1531
1551/1571/15 91/1611
Passband @ 0.5dB
nm
±6.5
±6.5
±6.5
Wavelength range of upgrade port
nm
1544.5~1621
1544.5~1621
-
dB
≤0.5
≤0.5
≤0.5
@ 1310 Port
dB
≤0.7
-
-
Passband @ 1310 Port
nm
1260~1360
-
-
LnCWDM
dB
≤2.3
≤2.0
-
UPGCWDM
dB
-
-
≤1.7
Ln – UPG
dB
≤2.3
≤2.0
-
Ln 1310nm
dB
≤1.2
-
-
Ripple
Insertion Loss (Including connectors)
5.10
Parameter
Performance of OBA Performacen of OBA is show in Table 34 .
ZTE Confidential Proprietary
© 2009 ZTE Corporation. All rights reserved.
39
ZXMP S385 V2.50 Product Description
Table 34
Performance of OBA Module
Performance
Unit
OBA12
OBA14
OBA17
Operating wavelength
nm
1530~1565
1530~1565
1530~1565
Input power
dBm
-12~4
-12~4
-6~4
Output power(maximum)
dBm
12
14
17
Dynamic range of output power (dB)
dB
3
3
3
Gain
dB
5~24
7~26
10~23
Small Signal Gain
dB
>25
>25
>25
Noise Index
dB
5
5
5
Input return loss
dB
45
45
45
output return loss
dB
45
45
45
Output pump leakage
dBm
-30
-30
-30
Input pump leakage
dBm
-30
-30
-30
PDG
dB
0.5
0.5
0.5
PMD
ps
1
1
1
Power(full temperature range)
W