• Author / Uploaded
• Velina Mileva

Citation preview

Atlas Copco Rock Drilling Tools SECOROC Down the hole equipment Super-Tac Premium Rock Drill Oil

Maintain performance and reliability Atlas Copco’s Super-Tac rock drill oils are engineered and developed for the unique requirements of today's high performance DHD's. Pressure, power and performance are higher today than ever before, and you need an oil you can count on. Super-Tac can handle internal loading and contact pressure like no other oil available. It performs so well that Atlas Copco offers an extended warranty for the internal parts of DHD's lubricated with Super-Tac.

Super-Tac Premium Rock Drill Oil Hammer Pressure

PSI

BAR

0 to 150 0 to 10 150 to 250 10 to 17 250 to 400 17 to 28 Grade

1 Gallon 3.8 Liter

Test Reference - ASTM Test Reference - ISO LIGHT 52334174 MEDIUM 52334182 HEAVY 52334190 EXTRA HEAVY 52334208

DEG F -16 TO 20

Ambient or Hammer Inlet Air Temperature (1) DEG C DEG F DEG C DEG F DEG C DEG F -26 TO 7 20 TO 60 7 TO 16 60 TO 90 16 TO 32 ABOVE 90

LIGHT LIGHT MEDIUM 5 Gallon 18.9 Liter

MEDIUM MEDIUM HEAVY 55 Gallon 207 Liter

ISO Grade Approx.

52333200 52333226 52333242 52333267

100 220 460 680

HEAVY EXTRA HEAVY EXTRA HEAVY

Viscosity (Cst@40C)

Viscosity Index (typ)

Pour Point Max F (C)

Flash Point Min F (C)

Emulsion Min to 35ml

90-110 198-242 380-430 560-610

D2270 2909 124 121 94 94

D97 3104 -16F/-26C 0F/-17C 10F/-12C 10F/-12C

D92 2592 460F/237C 457F/236C 455F/235C 455F/235C

D1401 3488 >60 >60 >60 >60



52333192 52333218 52333234 52333259

HEAVY HEAVY EXTRA HEAVY

DEG C ABOVE 32

Notes: 1) The temperature basis for selecting oil is based upon the ability for venturi or plunger lubricators to reliably dispense oil at temperature. If this is not a limitation, select heavier oils based on hammer air pressure. Note that the lubricated regions of most DHD’s and drifters are operating in excess of 150F. 2) Atlas Copco recommends injecting 1/3 pint per hour for every 100 acfm of air delivered. Or, 1/4 liter per hour for each 5mˆ3/minˆ. These amounts should be doubled when injecting more than 2 gpm of water.

Copper Blend High Temperature Drill Pipe Lubricant • Contains no lead or zinc. • Formulated with a proprietary blend of copper, graphite and other additives for unequaled protection and prevention of excessive circumferential makeup in hostile drilling environments. • Inhibitors protect against rust and corrosion. • Aluminum complex grease base for brushability and stability over a wide temperature range. • Adheres to oily threads • Applies easily with brush.

Part Number 51857407 51857415 51857423

Class S S S

9851 2429 01

Size 1 Gallon Pail 2 1/2 Gallon Pail 5 Gallon Pail

2006.01

Available in:

Atlas Copco Secoroc AB Box 521, SE-737 25 Fagersta, Sweden Tel +46 223 461 00 – Fax +46 223 461 01 www.atlascopco.com