• Author / Uploaded
• Milos Kovacevic

Citation preview

hp

TECHNIK

Main Catalog

www.hptechnik.com

hp

TECHNIK Sales

Support

hp-TECHNIK GmbH Gablonzer Str. 21 D-76185 Karlsruhe Phone +49 (0) 721/ 956 18-0 Fax +49 (0) 721/ 956 18-28 E-Mail [email protected]

Ms. Unger

+49 (0) 721/ 956 18-33 [email protected]

Ms. Wernthal

+49 (0) 721/ 956 18-14 [email protected]

Mr. Kretzler

+49 (0) 721/ 956 18-18 [email protected]

Fax Sales

+49 (0) 721/ 956 18-28

Mr. Pabst

+49 (0) 721/ 956 18-23 [email protected]

Mr. Rau

+49 (0) 721/ 956 18-25 [email protected]

Fax Support

+49 (0) 721/ 956 18-31

1. Auflage 2010 · 3000

Industrial pumps, overflow valves

22 - 31

3

Motor pump program and motor pump groups

33 - 49

4

Aggregates for single-pipe installation

50 - 53

5

Feed pumps and delivery aggregates

54 - 65

6

Accessories and spare parts

66 - 68

7

Oil burner nozzles

69

8

Special aggregates Terms of sale

70 71

www.hptechnik.com

hp

TECHNIK

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Overflow valves

Feed pumps and delivery aggregates

4 - 21

Accessories and spare sparts

Industrial pumps and special pumps

Oil burner nozzles

1 2

Special aggregates, terms of sale

Product Index

hp

TECHNIK

Industrial pumps and special pumps

www.hptechnik.com

Industrial pump program

1.0

A total of 6 series of hp-Industrial pumps and hp-Special pumps are available. An internal gear rotor drives an eccentric, externally toothed gear. The rotor and the toothed wheel are sealed with a fixed crescent. Internal gear pumps have been in use for more than 40 years and are used in many areas of industry because of their favorable construction and design.

Series B

Series VB with overflow valve

Technical facts:

4

·

Discharge range: 45 bis 6000 l/h

·

Operating pressures: 0 - 40 bar

·

Temperatures: up to 150 ° C

Series VBR with overflow valve and bypass

Series NV with overflow valve and bypass

Series PON with overflow valve, bypass and integrated filter

Series UHE with overflow valve and bypass

Applications:

Material:

Oil burning systems As oil burner pumps, closed circular pipe and transfer pumps for all fuel oils EL, L, M, S, ES, coaltar oils, lignite tar, oils, kerosene.

Pump castings are made of hydraulic cast iron GG 25 (for UHE GGG 40); rotor is of C 60; pinion is of 16 Mn Cr 5; axial face seal of cast iron /coal; up to 150 °C viton.

Machine construction As hydraulic pumps in hydraulic control units, as lubricating pumps for lubricating oils and greases, as cooling water pumps for water-oil emulsions.

Advantages:

Mineral oil industry As feed pumps for oils, grease, tar and bitumen.

Self-priming, self-lubricating, practically non-pulsating, quiet-running, practically maintenance-free, pressure proof and vacuum-tight shaft seals.

NEW Ship building As lubricating oil pumps and booster pumps for lubricating, diesel and heavy oils. Certificate for marine available on request.

In addition to the applications and pumping mediums mentioned here, hp-Industrial pumps are used in many other industries – pumping a wide variety of different mediums.

Industrial pump program

www.hptechnik.com

TECHNIK

Key for hp-Special pumps up to 40 bar

Industrial pumps, overflow valves

hp

1.0

for determination of the order numbers:

B B B B

VB VB VB VB

VBR VBR VBR VBR

NVBR NVBR NVBR NVBR

P M G F

45 80 120 160

P M G F

90 160 240 320

BG BG BG BG BG BG BG

VBG VBG VBG VBG VBG VBG VBG

VBGR VBGR VBGR VBGR VBGR VBGR VBGR

NVBGR NVBGR NVBGR NVBGR NVBGR NVBGR NVBGR

PP PZ P MZ M GZ G

150 200 300 – 450 – 600

PP PZ P MZ M GZ G

300 400 600 850 900 1100 1200

BH BH BH

VBH VBH VBH

VBHR VBHR VBHR

NVBHR NVBHR NVBHR

P M G

1000 1500 2000

– – –

– – –

BHG BHG BHG BHG

VBHG VBHG VBHG VBHG

VBHGR VBHGR VBHGR VBHGR

– – – –

P PZ M G

3000 3700 4500 6000

– – – –

– – – –

UHE-A2 UHE-A3 UHE-A4 UHE-A5

– – – –

– – – –

– – – –

PZ P M GZ

200 300 450 550

PZ P M GZ

500 700 900 1300

- Direction of rotation - Nozzle port (only PON) viewed from shaft

– Pressure stage bar

– Speed of rotation

Medium

Special execution, accesories (add code letters consecutively)

0 = 0,5 - 1,5 9 = 950 min -1

D = clockwise rotation

1=1-4

0 = fuel oil MGO/MDO

Aggregates for singlepipe installation

Discharge l/h 1400 min -1 2800 min -1 0 bar 0 bar

Series

–

Motor pump program, motor pump groups

–

H1 = electric heating for series B, VB, VBR and NVBR BH1 = drilling for H1

I = counter clockwise rotation

2=2-9

1 = 1400 min -1

– – – –

– – – –

– – – –

– – – –

– – – –

3 4 6 7

90 160 240 320

5 = heavy fuel H2 = electic heating for series UHE BH2 = drilling for H2

L = nozzle port left-hand side

4 = 15 - 40

2 = 2800 min -1

R = nozzle port right-hand side

Accessories and spare sparts

PON PON PON PON

3 = 6 - 25

Feed pumps and delivery aggregates

Sc = quick-closing valve

H3 = electric heating (only for PON)

Example for ordering: hp-Internal gear pump, series VB, with capacity of 450 I/h at 1400 min -1, fuel oil, direction of rotation „counterclockwise“, pressure settings 4 (15-40 bar).

Suntec E4/J4 E6/J6 E7/J7

==> ==> ==>

hp-TECHNIK PON3-D PON4-D PON6-D PON7-D

TA 2 A TA 3 A TA 4 A TA 5 A

==> ==> ==> ==>

UHE-A2-PZ-D UHE-A3-P-D UHE-A4-M-D UHE-A5-GZ-D

Conversion table – hp-TECHNIK Suntec E4/J4 E6/J6 E7/J7

==> ==> ==>

hp-TECHNIK PON3-I PON4-I PON6-I PON7-I

TA 2 C TA 3 C TA 4 C TA 5 C

==> ==> ==> ==>

UHE-A2-PZ-I UHE-A3-P-I UHE-A4-M-I UHE-A5-GZ-I

Special aggregates, terms of sale

Suntec

Oil burner nozzles

Series expression: VB GM – I – 4 – 10 max. permitted suction pressure on suction connection of the pump is -0,6 bar. Caution! Gas secretions arise already at -0,4 bar.

5

hp

Industrial pump program

www.hptechnik.com

TECHNIK

Series B; without overflow valve

1.1

Technical selection chart: scaled drawings I = indirect – counterclockwise Direction of rotation D = direct – clockwise viewed from shaft The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering! Series B

hp-Internal gear pumps up to 40 bar (direction I = indirect – counterclockwise) Pump series B

Viscosity: 6 mm2 sec -1 bei 20° C n = 1400 min -1 Discharge l/h

n = 2800 min -1 Discharge l/h

Threaded connection for (S/A)

Manometer max. allowed connection pump

Net weight (kg)

Size: BP BM BG BF

at 9 bar 45 80 120 160

at 30 bar 30 60 100 140

at 40 bar 20 50 80 120

Article-no. I 011/0002 011/0003 011/0004 011/0005

at 9 bar 90 160 240 320

at 30 bar 60 130 200 270

at 40 bar 50 120 190 260

Article-no. I 013/0002 013/0003 013/0004 013/0005

Gear rotor size Ø 25 25 25 25

BG PP BG PZ BG P BG MZ BG M BG GZ BG G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

80 140 200 – 360 – 480

011/0052 011/0053 011/0019 – 011/0020 – 011/0021

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

013/0052 013/0053 013/0019 013/0068 013/0020 013/0054 013/0031

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

– – – – – – –

2800 2800 2800 2800 2800 2800 1680

2,6 2,6 2,6 2,6 2,6 2,6 2,6

BH P BH M BH G

1000 1500 2000

700 1200 1700

600 1000 1400

011/0031 011/0032 011/0033

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/4“ 1/4“ 1/4“

1680 1680 1680

6,4 6,4 6,4

BHG P BHG PZ BHG M BHG G

3000 3700 4500 6000

2200 3000 3600 4800

2000 2700 3200 –

011/0043 011/0080 011/0044 011/0045

– – – –

– – – –

– – – –

– – – –

75 75 75 75

22 22 22 22

1 1/2“ 1 1/2“ 1 1/2“ 1 1/2“

– – – –

1400 1400 1400 1400

14,9 14,9 14,9 14,9

Threaded connection

Manometer connection

RPM (min -1)

Shaft Ø 12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

– – – –

at I/D 2800 2800 2800 2800

at I/D 1,8 1,8 1,8 1,8

hp-Internal gear pumps up to 40 bar (direction D = direct – clockwise) Pump series B

Viscosity: 6 mm2 sec -1 bei 20 ° C n = 1400 min -1 Discharge l/h

n = 2800 min -1 Discharge l/h

Gear rotor

for (S/A)

Heating Inital Initial capacity moment pump H1 in watt breakaway at 220V, 50HZ torque (Nm) at I/D at I/D 100 1,2 100 1,2 100 1,2 100 1,2

Size: BP BM BG BF

at 9 bar 45 80 120 160

at 30 bar 30 60 100 140

at 40 bar 20 50 80 120

Article-no. D 012/0002 012/0003 012/0004 012/0005

at 9 bar 90 160 240 320

at 30 bar 60 130 200 270

at 40 bar 50 120 190 260

Article-no. D 014/0002 014/0003 014/0004 014/0005

size Ø 25 25 25 25

Shaft Ø 12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

– – – –

BG PP BG PZ BG P BG MZ BG M BG GZ BG G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

80 140 200 – 360 – 480

012/0052 012/0053 012/0019 – 012/0020 – 012/0021

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

014/0052 014/0053 014/0019 014/0068 014/0020 014/0054 014/0031

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

– – – – – – –

100 100 100 100 100 100 100

1,6 1,6 1,6 1,6 1,6 1,6 1,6

BH P BH M BH G

1000 1500 2000

700 1200 1700

600 1000 1400

012/0031 012/0032 012/0033

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/4“ 1/4“ 1/4“

160 160 160

3,2 3,2 3,2

BHG P BHG PZ BHG M BHG G

3000 3700 4500 6000

2200 3000 3600 4800

2000 2700 3200 –

012/0043 012/0080 012/0044 012/0045

– – – –

– – – –

– – – –

– – – –

75 75 75 75

22 22 22 22

1 1/2“ 1 1/2“ 1 1/2“ 1 1/2“

– – – –

280 280 280 280

4,6 4,6 4,6 4,6

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

6

TECHNIK

Industrial pump program

www.hptechnik.com

Scaled drawings for series B

Industrial pumps, overflow valves

hp

1.1

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Pipe connections cyl. withworth pipe threating G… A DIN ISO 228

suction connection delivery connection

25 38 56 75

Gear rotor size Ø 25 38 56 75

Discharge l/h 1400 min -1 2800 min -1 45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

Discharge l/h 1400 min -1 2800 min -1 45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

Accessories and spare sparts

a1

a2

a3

b1

c1

c2

c3

c4

c5

c6

c7

c8

d1

35,5 43 48,5 64,5

20 26,5 38 83

33 38 45 70

51 70 96 115

41,5 55,5 71,5 129,5

14 14 15 18

16 16 18 25

40 40 79 65

20 20 27 37

55,5 69,5 86,5 147,5

76 76 124 127

131,5 145,5 210,5 274,5

12 12 18 22

sw

e

d2

d3

e1

e2

f2

f3

f4

g1

h1

h2

h3

27 27 46 55

31,2 31,2 53,1 63,5

54 54 60 80

80 80 100 120

G 3/8“ G 1/2“ G 3/4“ G 1 1/2“

71 82 112 170

16,5 19 22,5 35

38 44 67 100

92 92 120 150

43 43 65 90

11 11 13 14,5

13 13 13 15

13 13 25 –

Oil burner nozzles

Gear rotor size Ø

I = counterclockwise rotation

Special aggregates, terms of sale

D = clockwise rotation

Given a motive force of 56, the vacuum gauge and manometer connection is G 1/4“ at the face.

7

hp

Industrial pump program

www.hptechnik.com

TECHNIK

Series VB; with integrated overflow valve

1.2

Technical selection chart: scaled drawings I = indirect – counterclockwise Direction of rotation D = direct – clockwise viewed from shaft The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering! Series VB

hp-Internal gear pumps up to 40 bar Pump series VB

(direction I = indirect –counterclockwise)

Viscosity: 6 mm2 sec -1 at 20 °C n = 1400 min Discharge l/h

n = 2800 min -1 Discharge l/h

-1

Threaded connection for (S/A)

Manometer connection

Max. allowed pump RPM (min -1)

Net weight (kg)

Size:

at 9 bar

at 30 bar

at 40 bar

Article-no. I

at 9 bar

at 30 bar

at 40 bar

Article-no. I

Gear rotor size Ø

at I/D

at I/D

VB P VB M VB G VB F

45 80 120 160

30 60 100 140

20 50 80 120

011/0007 011/0008 011/0009 011/0010

90 160 240 320

60 130 200 270

50 120 190 260

013/0007 013/0008 013/0009 013/0010

25 25 25 25

12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

1/4“ 1/4“ 1/4“ 1/4“

2800 2800 2800 2800

2,5 2,5 2,5 2,5

VBG PP VBG PZ VBG P VBG MZ VBG M VBG GZ VBG G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

80 140 200 – 360 – 480

011/0055 011/0056 011/0022 – 011/0023 – 011/0024

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

013/0030 013/0056 013/0021 013/0070 013/0022 013/0065 013/0032

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“

2800 2800 2800 2800 2800 2800 1680

3,3 3,3 3,3 3,3 3,3 3,3 3,3

VBH P VBH M VBH G

1000 1500 2000

700 1200 1700

600 1000 1400

011/0034 011/0035 011/0036

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/4“ 1/4“ 1/4“

1680 1680 1680

7,3 7,3 7,3

VBHG P VBHG PZ VBHG M VBHG G

3000 3700 4500 6000

2200 3000 3600 4800

2000 2700 3200 –

011/0046 011/0085 011/0047 011/0048

– – – –

– – – –

– – – –

– – – –

75 75 75 75

22 22 22 22

1“ 1“ 1“ 1“

1/4“ 1/4“ 1/4“ 1/4“

1400 1400 1400 1400

18,6 18,6 18,6 18,6

Threaded connection for (S/A)

Manometer connection

Shaft Ø

hp-Internal gear pumps up to 40 bar (direction D = direct – clockwise) Viscosity: 6 mm2 sec -1 at 20 °C

Pump series VB

n = 1400 min Discharge l/h at at 30 bar 40 bar 30 20 60 50 100 80 140 120

Article-no. D 012/0007 012/0008 012/0009 012/0010

at 9 bar 90 160 240 320

80 140 200 – 360 – 480

012/0055 012/0056 012/0022 – 012/0023 – 012/0024

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

014/0030 014/0056 014/0021 014/0070 014/0022 014/0065 014/0032

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“

100 100 100 100 100 100 100

1,6 1,6 1,6 1,6 1,6 1,6 1,6

700 1200 1700

600 1000 1400

012/0034 012/0035 012/0036

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/4“ 1/4“ 1/4“

160 160 160

3,2 3,2 3,2

2200 3000 3600 4800

2000 2700 3200 –

012/0046 012/0085 012/0047 012/0048

– – – –

– – – –

– – – –

– – – –

75 75 75 75

22 22 22 22

1“ 1“ 1“ 1“

1/4“ 1/4“ 1/4“ 1/4“

280 280 280 280

4,6 4,6 4,6 4,6

Size: VB P VB M VB G VB F

at 9 bar 45 80 120 160

VBG PP VBG PZ VBG P VBG MZ VBG M VBG GZ VBG G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

VBH P VBH M VBH G

1000 1500 2000

VBHG P VBHG PZ VBHG M VBHG G

3000 3700 4500 6000

Gear rotor size Ø 25 25 25 25

Shaft Ø 12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

1/4“ 1/4“ 1/4“ 1/4“

Heating Initial capacity pump H1 in Watt breakaway at 220V, 50Hz torque at I/D at I/D 100 1,2 100 1,2 100 1,2 100 1,2

n = 2800 min -1 Discharge l/h at at Article-no. 30 bar 40 bar D 60 50 014/0007 130 120 014/0008 200 190 014/0009 270 260 014/0010

-1

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

8

TECHNIK

Industrial pump program

www.hptechnik.com

Scaled drawings for series VB

Industrial pumps, overflow valves

hp

1.2

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Manometer connection cyl. withworth pipe threading G… A DIN ISO 228

Manometer 1 Feed pumps and delivery aggregates

Vakuum gauge after removal of cover screw: Pressure regulation Suction connection Delivery connection Manometer 2

Manometer 2 I = counterclockwise rotation

Accessories and spare sparts

D = clockwise rotation

1400 min -1

Discharge l/h 2800 min -1

a1

a2

a3

b1

c1

c2

c3

c4

c5

c6

c7

25 38 56 75

45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

35,5 39,5 48,5 62,5

20 30 38 85

33 38 45 70

51 70 96 115

41,5 55,5 71,5 129,5

14 14 15 18

16 16 18 25

40 40 79 65

20 20 27 37

55,5 69,5 86,5 147,5

76 76 124 127

Gear rotor size Ø

1400 min -1

2800 min -1

c8

d1

sw/e

d2

d3

e1

f1

f2

f3

f4

25 38 56 75

45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

131,5 145,5 210,5 274,5

12 12 18 22

27/31,2 27/31,2 46/53,1 55/63,5

54 54 60 80

80 80 100 120

G 3/8“ G 1/2“ G 3/4“ G 1“

139 139 162 211

32 32 26,5 36

90 90 118 150

17 17 17,5 25

Gear rotor size Ø

1400 min -1

2800 min -1

f5

f6

f7

f8

g1

g2

g3

h1

h2

h3

25 38 56 75

45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

26 23 25,5 35

38 44 67 80

92 92 120 150

140 140 171 218

40 48 55 80

27 27 35 40

67 75 90 120

11 11 13 14,5

13 13 13 15

13 13 25 –

Oil burner nozzles

Gear rotor size Ø

Discharge l/h

Special aggregates, terms of sale

– – – –

Discharge l/h – – – – 9

hp

Industrial pump program

www.hptechnik.com

TECHNIK

Series VBR; with integrated overflow valve and bypass

1.3

Technical selection chart: scaled drawings I = indirect – counterclockwise Direction of rotation D = direct – clockwise viewed from shaft The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering! Series VBR

hp-Internal gear pumps up to 40 bar (direction I = indirect – counterclockwise) Pump series VBR

Viscosity: 6 mm2 sec -1 bei 20 °C n = 1400 min -1 Discharge l/h

n = 2800 min -1 Discharge l/h

Threaded connection for (S/A/R)

Manometer connection

Max. allowed pump RPM (min -1)

Net weight (kg)

Size:

at 9 bar

at 30 bar

at 40 bar

Article-no. I

at 9 bar

at 30 bar

at 40 bar

Article-no. I

Gear rotor size Ø

at I/D

at I/D

VBR P VBR M VBR G VBR F

45 80 120 160

30 60 100 140

20 50 80 120

011/0011 011/0012 011/0013 011/0014

90 160 240 320

60 130 200 270

50 120 190 260

013/0011 013/0012 013/0013 013/0014

25 25 25 25

12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

– – – –

2800 2800 2800 2800

2,5 2,5 2,5 2,5

VBGR PP VBGR PZ VBGR P VBGR MZ VBGR M VBGR GZ VBGR G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

80 140 200 – 360 – 480

011/0065 011/0062 011/0025 – 011/0026 – 011/0027

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

013/0040 013/0041 013/0023 013/0072 013/0024 013/0042 013/0043

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

– – – – – – –

2800 2800 2800 2800 2800 2800 1680

3,3 3,3 3,3 3,3 3,3 3,3 3,3

VBHR P VBHR M VBHR G

1000 1500 2000

700 1200 1700

600 1000 1400

011/0037 011/0038 011/0039

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/8“ 1/8“ 1/8“

1680 1680 1680

7,3 7,3 7,3

VBHGR P VBHGR PZ VBHGR M VBHGR G

3000 3700 4500 6000

2200 3000 3600 4800

2000 2700 3200 –

011/0049 011/0090 011/0050 011/0051

– – – –

– – – –

– – – –

– – – –

75 75 75 75

22 22 22 22

1“ 1“ 1“ 1“

1/4“ 1/4“ 1/4“ 1/4“

1400 1400 1400 1400

18,6 18,6 18,6 18,6

Threaded connection for (S/A/R)

Manometer connection

Shaft Ø

hp-Internal gear pumps up to 40 bar (direction D = direct – clockwise) Pump series VBR

Viscosity: 6 mm2 sec -1 bei 20 °C n = 1400 min -1 Discharge l/h

n = 2800 min -1 Discharge l/h

Heating Initial capacity pump H1 in Watt breakaway at 220V, 50Hz torque

Size: VBR P VBR M VBR G VBR F

at 9 bar 45 80 120 160

at 30 bar 30 60 100 140

at 40 bar 20 50 80 120

Article-no. I 012/0011 012/0012 012/0013 012/0014

at 9 bar 90 160 240 320

at 30 bar 60 130 200 270

at 40 bar 50 120 190 260

Article-no. I 014/0011 014/0012 014/0013 014/0014

Gear rotor size Ø 25 25 25 25

VBGR PP VBGR PZ VBGR P VBGR MZ VBGR M VBGR GZ VBGR G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

80 140 200 – 360 – 480

012/0065 012/0062 012/0025 – 012/0026 – 012/0027

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

014/0040 014/0041 014/0023 014/0072 014/0024 014/0042 014/0043

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

– – – – – – –

100 100 100 100 100 100 100

1,6 1,6 1,6 1,6 1,6 1,6 1,6

VBHR P VBHR M VBHR G

1000 1500 2000

700 1200 1700

600 1000 1400

012/0037 012/0038 012/0039

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/8“ 1/8“ 1/8“

160 160 160

3,2 3,2 3,2

VBHGR P VBHGR PZ VBHGR M VBHGR G

3000 3700 4500 6000

2200 3000 3600 4800

2000 2700 3200 –

012/0049 012/0090 012/0050 012/0051

– – – –

– – – –

– – – –

– – – –

75 75 75 75

22 22 22 22

1“ 1“ 1“ 1“

1/4“ 1/4“ 1/4“ 1/4“

280 280 280 280

4,6 4,6 4,6 4,6

Shaft Ø 12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

– – – –

at I/D 100 100 100 100

at I/D 1,2 1,2 1,2 1,2

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

10

TECHNIK

Industrial pump program

www.hptechnik.com

1.3

Motor pump program, motor pump groups

Scaled drawings for series VBR

Industrial pumps, overflow valves

hp

Aggregates for singlepipe installation

Pipe connections cyl. withworth pipe threading G… A DIN ISO 228

Special model: * with SC quick-close * e2 nozzle connection

*(e2) Manometer 1

*(e2) Feed pumps and delivery aggregates

Manometer 1 After removal of cower screw: pressure regulation

Bypass connection Delivery connection

D = clockwise rotation

Discharge l/h 1400 min -1

2800 min -1

a1

a2

a3

b1

c1

c2

c3

c4

c5

c6

c7

c8

45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

35,5 39,5 48,5 62,5

20 30 38 85

33 38 45 70

51 70 96 115

41,5 55,5 71,5 129,5

14 14 15 18

16 16 18 25

40 40 79 65

20 20 27 37

55,5 69,5 86,5 147,5

76 76 124 127

131,5 145,5 210,5 274,5

Model 25 38 56 75

Discharge l/h 1400 min -1

2800 min -1

d1

sw

e

d2

d3

e1

*e2

f1

f2

f3

f4

f5

45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

12 12 18 22

27 27 46 55

31,2 31,2 53 63,5

54 54 60 80

80 80 100 120

G 3/8“ G 1/2“ G 3/4“ G 1“ 1)

G 3/8“ G 3/8“ G 3/8“ G 3/8“

139 139 162 211

32 32 26,5 36

90 90 118 150

17 17 17,5 25

26 23 25,5 35

Model 25 38 56 75

Special aggregates, terms of sale

25 38 56 75

I = counterclockwise rotation

Oil burner nozzles

Model

Accessories and spare sparts

Suction connection

Discharge l/h 1400 min -1

2800 min -1

f6

f7

f8

f9

g1

g2

g3

g4

g5

h1

h2

h3

45 - 160 150 - 600 1000 - 2000 3000 - 6000

90 - 320 300 - 1200 – –

38 44 67 80

92 92 120 150

140 140 171 218

18 18 26,5 32

30 32 38 18

33 35 42 62

63 67 80 80

27 27 35 40

90 94 115 120

11 11 13 14,5

13 13 13 15

13 13 25 –

VBHGR model with G 1/4“ manometer connection at the face. 1) Given a motive force of 75 = 3000 to 6000 l/h, the suction connection at the side is G1 1/2“.

11

hp

Industrial pump program

www.hptechnik.com

TECHNIK

Series NV; with integrated overflow valve and bypass

1.4

Technical selection chart: scaled drawings I = indirect – counterclockwise Direction of rotation D = direct – clockwise viewed from shaft The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering! Series NV

hp-Internal gear pumps up to 40 bar (direction I = indirect – counterclockwise) Pump series NV

Viscosity: 6 mm2 sec -1 bei 20 °C n = 1400 min -1 Discharge l/h

n = 2800 min -1 Discharge l/h

Threaded connection for (S/A/R)

Manometer connection

Max. allowed pump RPM (min -1)

Net weight (kg) at I/D 2,8 2,8 2,8 2,8

Size NVBR P NVBR M NVBR G NVBR F

at 9 bar 45 80 120 160

at 30 bar 30 60 100 140

at 40 bar 20 50 80 120

Article-no. I 011/0015 011/0016 011/0017 011/0018

at 9 bar 90 160 240 320

at 30 bar 60 130 200 270

at 40 bar 50 120 190 260

Article-no. I 013/0015 013/0016 013/0017 013/0018

Gear rotor size Ø 25 25 25 25

NVBGR PP NVBGR PZ NVBGR P NVBGR MZ NVBGR M NVBGR GZ NVBGR G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

80 140 200 – 360 – 480

011/0075 011/0076 011/0028 – 011/0029 – 011/0030

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

013/0025 013/0028 013/0026 013/0074 013/0027 013/0029 013/0034

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“

2800 2800 2800 2800 2800 2800 1680

3,8 3,8 3,8 3,8 3,8 3,8 3,8

NVBHR P 1000 NVBHR M 1500 NVBHR G 2000

700 1200 1700

600 1000 1400

011/0040 011/0041 011/0042

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/4“ 1/4“ 1/4“

1400 1400 1400

8,6 8,6 8,6

Threaded connection for (S/A/R)

Manometer connection

Shaft Ø 12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

1/4“ 1/4“ 1/4“ 1/4“

at I/D 2800 2800 2800 2800

hp-Internal gear pumps up to 40 bar (direction D = direct – clockwise) Pump series NV

Viscosity: 6 mm2 sec -1 bei 20 °C n = 1400 min -1 Discharge l/h at at 30 bar 40 bar 30 20 60 50 100 80 140 120

Size NVBR P NVBR M NVBR G NVBR F

at 9 bar 45 80 120 160

NVBGR PP NVBGR PZ NVBGR P NVBGR MZ NVBGR M NVBGR GZ NVBGR G

150 200 300 – 450 – 600

100 160 240 – 390 – 540

NVBHR P 1000 NVBHR M 1500 NVBHR G 2000

700 1200 1700

Gear rotor size Ø 25 25 25 25

Shaft Ø 12 12 12 12

3/8“ 3/8“ 3/8“ 3/8“

1/4“ 1/4“ 1/4“ 1/4“

Heating Inital capacity pump (Watt) breakaway at 220V, 50HZ torque at I/D at I/D 100 1,2 100 1,2 100 1,2 100 1,2

Article-no. D 012/0015 012/0016 012/0017 012/0018

at 9 bar 90 160 240 320

n = 2800 min -1 Discharge l/h at at Article-no. 30 bar 40 bar D 60 50 014/0015 130 120 014/0016 200 190 014/0017 270 260 014/0018

80 140 200 – 360 – 480

012/0075 012/0076 012/0028 – 012/0029 – 012/0030

300 400 600 850 900 1100 1200

240 310 520 750 850 1000 1080

210 280 480 700 730 870 960

014/0025 014/0028 014/0026 014/0074 014/0027 014/0029 014/0034

38 38 38 38 38 38 38

12 12 12 12 12 12 12

1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“

1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“ 1/4“

100 100 100 100 100 100 100

1,6 1,6 1,6 1,6 1,6 1,6 1,6

600 1000 1400

012/0040 012/0041 012/0042

– – –

– – –

– – –

– – –

56 56 56

18 18 18

3/4“ 3/4“ 3/4“

1/4“ 1/4“ 1/4“

160 160 160

3,2 3,2 3,2

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

12

Industrial pump program

www.hptechnik.com

TECHNIK

Scaled drawings for series NV

Industrial pumps, overflow valves

hp

1.4

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Pipe connections cyl. withworth pipe threading G… A DIN ISO 228

Special Model: * with SC quick-close * e2 nozzle connection

*e2

*e2

Manometer 1

Manometer 2 Feed pumps and delivery aggregates

Manometer 2

Vacuum gauge after removal of cover screw: pressure regulation Suction connection Bypass connection

D = clockwise rotation

Accessories and spare sparts

Delivery connection

I = counterclockwise rotation

1400 min -1

Discharge l/h 2800 min -1

a1

a2

a3

b1

c1

c2

c3

c4

c5

c6

c7

25 38 56

45 - 160 150 - 600 1000 - 2000

90 - 320 300 - 1200 –

35,5 39,5 48,5

20 30 38

33 38 45

51 70 96

41,5 55,5 71,5

14 14 15

16 16 18

40 40 79

20 20 27

55,5 69,5 86,5

76 76 124

Gear rotor size Ø

1400 min -1

2800 min -1

c8

d1

sw/e

d2

d3

e1

*e2

f1

f2

f3

f4

25 38 56

45 - 160 150 - 600 1000 - 2000

90 - 320 300 - 1200 –

131,5 145,5 210,5

12 12 18

27/31,2 27/31,2 46/53,1

54 54 60

80 80 100

G 3/8“ G 1/2“ G 3/4“

G 3/8“ G 3/8“ G 3/8“

165 165 194

32 32 26,5

116 116 150

17 17 17,5

Gear rotor size Ø

1400 min -1

2800 min -1

f5

f6

f7

f8

f9

g1

g2

g3

h1

h2

h3

25 38 56

45 - 160 150 - 600 1000 - 2000

90 - 320 300 - 1200 –

25,5 23 25

32,5 35 50

92 92 120

166 166 203

18 18 26,5

40 45 65

27 27 40

67 72 105

11 11 13

13 13 13

13 13 25

Oil burner nozzles

Gear rotor size Ø

Special aggregates, terms of sale

Discharge l/h

Discharge l/h

With G 1/4“ manometer connection at the face. 13

hp

Industrial pump program

www.hptechnik.com

TECHNIK

Series UHE; with integrated overflow valve and bypass

1.5

Technical selection chart: Direction of rotation of the pumps I = indirect – counterclockwise D = direct – clockwise The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per dimension sheet when ordering. Standard design of the pump for two pipe installation, design for one pipe installation on enquiry!

Series UHE

hp-Internal gear pumps up to 40 bar (direction of rotation I = direct – counter clockwise) Pump series UHE at Size 9 bar UHE-A2-PZ 200 UHE-A3-P 300 UHE-A4-M 450 UHE-A5-GZ 550

Viscosity: 6 mm2 sec -1 bei 20 °C n = 1400 min -1 Discharge l/h at 30 bar 155 260 425 500

at 40 bar 140 240 390 450

n = 2800 min -1 Discharge l/h Article-no. I 0110542 0110543 0110544 0110545

at 9 bar 500 700 900 1300

at 30 bar 380 600 850 1150

at 40 bar 330 550 800 1050

Article-no. I 0130542 0130543 0130544 0130545

Gear rotor size Ø 38 38 38 38

Shaft Ø 12 12 12 12

Threaded connection for (S/A/R)

Manometer connection (M1/M2)

G1/2 “ G1/2 “ G1/2 “ G1/2 “

G1/4 “ G1/4 “ G1/4 “ G1/4 “

Threaded connection for (S/A/R)

Manometer connection (M1/M2)

G1/2 ” G1/2 “ G1/2 ” G1/2 “

G1/4 ” G1/4 “ G1/4 ” G1/4 “

Max. allowed pump RPM (min -1)

Net weight (kg)

at I/D 2800 2800 2800 2800

at I/D 4,4 4,6 4,8 5,0

hp-Internal gear pumps up to 40 bar (direction of rotation D = direct – clockwise) Pump series UHE at Size 9 bar UHE-A2-PZ 200 UHE-A3-P 300 UHE-A4-M 450 UHE-A5-GZ 550

Viscosity: 6 mm2 sec -1 bei 20 °C n = 1400 min -1 Discharge l/h at 30 bar 155 260 425 500

at 40 bar 140 240 390 450

n = 2800 min -1 Discharge l/h Article-no. D 0120542 0120543 0120544 0120545

at 9 bar 500 700 900 1300

at 30 bar 380 600 850 1150

at 40 bar 330 550 800 1050

Article-no. D 0140542 0140543 0140544 0140545

Gear rotor size Ø 38 38 38 38

Shaft Ø 12 12 12 12

Characteristics hp-Industrial pumps Series UHE - AX; for fuel oil L / EL

14

at 1400 min-1

at 2800 min-1

Pressure (bar)

Pressure (bar)

Heating Initial capacity H2 pump in Watt at breakaway 230V, 50 Hz torque (Nm) at I/D 110 110 110 110

at I/D 1,6 1,6 1,6 1,6

Industrial pump program

www.hptechnik.com

TECHNIK

1.5

Accessories and spare sparts

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Scaled drawings for series UHE

Industrial pumps, overflow valves

hp

Series UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ

a1 5 5 5 5

a2 36 36 36 36

a3 66 66 66 66

b1 85 85 85 85

b2 130 130 130 130

c1 36 36 36 36

c2 50 54 58 64

d1 12 12 12 12

d2 13,5 13,5 13,5 13,5

d3 54 54 54 54

Series UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ

e1 11 11 11 11

f1 35 35 35 35

f2 101 101 101 101

f3 125 125 125 125

f4 58 58 58 58

f5 98 98 98 98

f6 72,5 72,5 72,5 72,5

S; A; R 1/2 “ 1/2 “ 1/2 “ 1/2 “

M1; M2 G1/4 “ G1/4 “ G1/4 “ G1/4 “

M3 1/8 “ 1/8 “ 1/8 “ 1/8 “

Accessories for UHE-series

Oil burner nozzles

Pipe connections DIN ISO 228

60,0

hp-Electric standby and companion heaters series H2, for hp-Industrial pumps

Special aggregates, terms of sale

Axial face seal: see page 18 (gear rotor size Ø 38) silicone-cable I = 1500 mm heating H2 110 W/230 V

All hp-Industrial pumps series UHE-AX can be equipped with electric heating, series H2, at the factory. drill hole Ø 12,0 H7 connecting wire

15

hp

TECHNIK

Industrial pump program

www.hptechnik.com

Series PON; with integrated overflow valve, bypass, integrated filter

1.6

Technical selection chart Direction of rotation

I = indirect – counterclockwise D = direct – clockwise

Nozzle port

R = on the right-hand side L = on the left-hand side

The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation and the direction of the nozzle port as per the size chart/sheet when ordering! Standard design of the pump for two pipe installation, design for one pipe installation can be changed individually. (See operation installation and maintenance instructions).

hp-Internal gear pumps up to 40 bar Pump series PON 3 PON 4 PON 6 PON 7 Pump series PON 3 PON 4 PON 6 PON 7

Capacity l/h at: n = 2800 min -1 viscosity 5 cSt. 9 bar 30 bar 40 bar 90 160 240 320

60 130 200 270

50 120 190 260

Direction of rotation

Nozzle port

D = direct-clockwise

R

I = indirect-counterclockwise

L

Article-no. I-L

Capacity at 9 bar in Connection l/h Nozzle Suction side Bypass 90 1/4“ 1/2“ 1/2“ 160 1/4“ 1/2“ 1/2“ 240 1/4“ 1/2“ 1/2“ 320 1/4“ 1/2“ 1/2“

Manometer 1/8“ 1/8“ 1/8“ 1/8“

Max. allowed pump Gear rotor size Ø RPM (min -1)

0130601 0130602 0130603 0130604

I-R 0130611 0130612 0130613 0130614

Pressure stage 1 = 1- 4 2 = 2-9 3 = 6-25 4 = 15-40

D-L

D-R

0140601 0140602 0140603 0140604

0140611 0140612 0140613 0140614

RPM (min -1)

3600 3600 3600 3600

25 25 25 25

1 = 1400 min -1

0 = fuel oil EL + L MGO/MDO

2 = 2800 min -1

5 = fuel oil M + S

H3- heating element PON E- one pipe installation Z- two pipe installation

capacity (l/h)

capacity (l/h)

Viscosity 200 cSt 2800 min-1

pressure (bar)

Viscosity 5 cSt 2800 min-1

16

Viscosity 200 cSt 2800 min-1

power (kw)

power (kw)

pressure (bar)

5,0

Accessories

Series PON, for viscosity 5 cSt and 200 cSt

pressure (bar)

1,2 Nm 1,2 Nm 1,2 Nm 1,2 Nm

Net weight kg

Medium

Characteristics hp-Industrial pumps Viscosity 5 cSt 2800 min-1

Initial pump breakaway torque

pressure (bar)

TECHNIK

www.hptechnik.com

Industrial pump program 1.6

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Scaled drawings for series PON

Industrial pumps, overflow valves

hp

Feed pumps and delivery aggregates

Pipe connections cyl. withworth pipe threating DIN ISO 228

hp-Electric standby and companion heaters series H3 for hp-Oilburnerpumps series PON

Special aggregates, terms of sale

Oil burner nozzles

Accessories and spare sparts

All hp-Oilburnerpumps series PON can be equiped with electric heating, series H3, at the factory.

17

hp

Industrial pump program

www.hptechnik.com

TECHNIK

hp-Pump accessories

1.7

All hp pumps are equipped with axial face seals made of viton which can resist pressures of up to 5 bar and with stand temperatures of up to 150 ° C. The axial face seals are relieved of pressure on the suction side of the pump. See graph for maximum pressure load of the axial face seal, i.e. of the suction side in dependance with the temperature.

Gear rotor size Ø

Shaft Ø

Viton (max. 150° C) spare part article-no.

25 38 56 75

12 12 18 22

0190015 0190015 0190016 0190017

2

9 max. delivery (bar)

Product number for axial face seal

1

10

8

7

6 5 25°

50°

75°

100°

125°

Temperature °C

3

2a

1 = mating ring 2 = shaft seal 2a = tension ring 3 = coupling ring

Minimum distance of clutch

hp-Electric standby and companion heaters for type H1 – hp-Industrial pump All hp pump models can be equipped with electric heating, type H1, at the factory.

18

Equipped at factory: Article-no. H1 0190050 0190051 0190052 0190053

Spare part

Shaft

Article-no. H1

Suitable for pumps with a motive force diameter of:

Ø

Heating capacity [W]

0190055 0190056 0190057 0190058

25 38 56 75

12 12 18 22

100 100 160 280

Number of heating cartridges 230 V, 50 Hz, other voltages available upon request 1 1 1 1

Heating element

Drilling Ø 6,5H7, Ø 8H7

150°

Accessories and spare sparts

Feed pumps and delivery aggregates

Motor pump program, motor pump groups

Discharge graphs for hp-Industrial pumps

Aggregates for singlepipe installation

www.hptechnik.com

Oil burner nozzles

at 2800 min -1

TECHNIK

Special aggregates, terms of sale

at 1400 min -1

Characteristics hp-Industrial pumps · Gear rotor size-ø 25; for fuel oil L/EL

hp

1.8

Industrial pumps, overflow valves

Industrial pump program

19

20

at 2800 min -1

Pressure (bar)

Pressure (bar)

at 1400 min -1

Pressure (bar)

Pressure (bar)

Characteristics hp-Industrial pumps · Gear rotor size-ø 38; for fuel oil L/EL

hp TECHNIK www.hptechnik.com

Industrial pump program

Discharge graphs for hp-Industrial pumps 1.8

Accessories and spare sparts

Feed pumps and delivery aggregates

Motor pump program, motor pump groups

Discharge graphs for hp-Industrial pumps

Aggregates for singlepipe installation

www.hptechnik.com

Oil burner nozzles

Gear rotor size- ø 75 at 1400 min-1

TECHNIK

Special aggregates, terms of sale

Gear rotor size- ø 56 at 1400 min-1

Characteristics hp-Industrial pumps for fuel oil L/EL

hp

1.8

Industrial pumps, overflow valves

Industrial pump program

21

hp

TECHNIK

Overflow valves

www.hptechnik.com

Overflow valve program

2.0

hp-Overflow valves

Overflow valves Thread connection Flange connection Regulating valves Flow regulating valve

22

Flange connection with modulating kit Flange connection for SAE connection

Overflow valves

www.hptechnik.com

TECHNIK

hp-Overflow valves with thread connection

Industrial pumps, overflow valves

hp

2.1

Mode of operation E; with adjustment screw For lubricating and hydraulic oils and many other self-lubricating, non-corrosive fluids. Motor pump program, motor pump groups

Maximum temperature of delivery fluid: 150 °C. Material: casing of hydraulic cast iron GGG 40. Piston, valve tip, spring of hardened steel. Action: directly controlled, spring-loaded overflow valve to maintain a set operating pressure or a set maximum pressure.

B - PP - E B-P-EB-G-EB - GH - E - 3) B - GHG - E B - GHG - R 1 1/4“ - E -

Connection-thread 1) G 1/4“ G 3/8“ G 1/2“ G 3/4“ G 1“ G 1 1/4“

0 = 0,5 - 1,5 bar 1 = 1 - 4 bar 2 = 2 - 9 bar 3 = 6 - 25 bar 4 = 15 - 40 bar

1)

Cyl. withworth pipe threading G…A DIN ISO 228

2)

Performance curve on page 24-26.

3)

No pressure stage 0, instead 1: 0.5 - 3.5 bar. Refer to chart for all other pressure stages.

Flow rate 2) l/h

Viscosity stage 2) cSt

Article-no.

6 - 120 15 - 160 30 - 600 100 - 2000 300 - 6000 500 - 10000

2,8 to 480 2,8 to 480 2,8 to 480 2,8 to 480 2,8 to 480 2,8 to 480

0210001 0210002 0210003 0210004 0210005 0210006

Article-no. 0840750 0840752 0840754 0840756 0840758 0840760

Ø/Drilling 20/2,5 20/5,0 20/7,5 30/10 35/15 35/25

Type BP BG/FDR 15 BG/FDR 15 BHG/FDR 20 BGHG 1“/FDR 25 BGHG 11/4“/FDR 32

For very dirty heavy oils the overflow valve may be equipped / sublemented with a piston with axial nut (heavy oil piston) at an additional cost.

Aggregates for singlepipe installation

Pressure stage for type (Article-no.)

Feed pumps and delivery aggregates

Type

T

P

Accessories and spare sparts

Summary: hp overflow valve, flow rate: . . . . . (l/h) pressure range . . . . , adjustable . . . . . (bar) type: . . . . .

Model equipped with regulating screw

Oil burner nozzles

Turning the pressure regulating screw to the right (clockwise) with a hexagon screwdriver will increasethe pressure and turning it to the left (counterclockwise) will reduce the pressure.

Size chart

PP P G GH GHG GHG - 1 1/4“

a

b1

c1

d1

d2

f1

Max. pipe

NW

f2

0+1

44 55 55 63 80 80

36 51 51 57 71 71

34 37 37 43 60 60

26 36 36 50 56 56

40 52 52 70 86 86

G 1/4“ G 3/8“ G 1/2“ G 3/4“ G 1“ G 1 1/4“

10 x 1 12 x 1 18 x 1,5 22 x 1,5 28 x 1,5 35 x 2

8 10 15 20 25 30

G 1/8“ G 1/8“ G 1/8“ G 1/4“ G 1/4“ G 1/4“

10 15 15 15 20 20

Adjustable range h at stage: 2 3 6 12 12 10 17 17

6 8 8 8 9 9

4

Special aggregates, terms of sale

Type

1,5 7 7 5 6 6

For assembly, start-up and maintenance, please adhere to the instruction manual that comes with each device! 23

hp

TECHNIK

Overflow valves

www.hptechnik.com

hp-Overflow valve with flange connection

2.2

Mode of operation E: with adjustment screw For lubricating and hydraulic oils and many other self-lubricating, non-corrosive fluids. Fuel oil EL, L, M, S und ES, kerosine. Maximum temperature of delivery fluid: 150 ° C Material: casing of hydraulic cast iron GGG 40. Piston, valve tip, spring of hardened steel. Action: directly controlled, spring-loaded overflow valve to maintain a set operating pressure or a set maximum pressure.

Type FDR 15 - E FDR 20 - E FDR 25 - E FDR 32 - E FDR 50 - E

Pressure stage for type (Article-no.)

Flange DIN 2635 PN 40

Flow rate 2) l/h

Viscosity stage 2) cSt

Article-no.

0 = 0,5 - 1,5 bar 1 = 1 - 4 bar 2 = 2 - 9 bar 3 = 6 - 25 bar 4 = 15 - 40 bar

DN 15 1) DN 20 1) DN 25 1) DN 32 1) DN 50

30 - 600 100 - 2000 300 - 6000 500 - 10000 8000 - 20000

2,8 to 480 2,8 to 480 2,8 to 480 2,8 to 480 2,8 to 480

0270001 0270002 0270003 0270004 0270006

3)

1) Counter flange with seal + screws must be ordered seperately 2) Performance curve on page 29-31 3) Only with: pressure stage 1: 1 - 4 bar pressure stage 2: 2 - 9 bar pressure stage 4: 6 - 40 bar

Size chart Type FDR 15 FDR 20 FDR 25 FDR 32 FDR 50

a 55 63 80 80 140

b

DIN-Flange DIN 2635

ØD

Øk

Ø d2

92 118 134 138 205

DN 15 DN 20 DN 25 DN 32 DN 50

95 105 115 140 165

65 75 85 100 125

14 14 14 18 18

For assembly, start-up and maintenance, please adhere to the instruction manual that comes with each device! 24

??????????? Suitable counter flanges for PN 10 - 40 as DIN 2632-35

TECHNIK

Overflow valves

www.hptechnik.com

Pressure regulating valve with modulating kit

Industrial pumps, overflow valves

hp

2.3

Pressure stage

DRV 18 EL DRV 19 EL DRV 21 S DRV 22 S

Connection

Flow rate I/h 300-600 1000-2000 300-600 1000-2000

G 3/8“ G 3/4“ G 3/8“ G 3/4“

2 = 2-18 bar

Articleno. 025 0202 025 0206 025 0210 025 0214

Weight kg 1,5 3 1,5 3

For fuel oil EL EL S S

Accessories and spare sparts

Feed pumps and delivery aggregates

3 = 15-25 bar

Viscosity stage cSt 2,8 to 480 2,8 to 480 2,8 to 480 2,8 to 480

Aggregates for singlepipe installation

Type

Motor pump program, motor pump groups

Usage: modulating kit The regulating valve is used to adjust the oil flow at the backflow of the burner unit. This is needed to ensure the proper nozzle flow and burner output required. Material: Casing of hydraulic cart iron GGG 40

Pressure Turning the pressure regulating screw to the right (clockwise) with a screwdriver will increase the pressure and turning it to the left (counterclockwise) will reduce the pressure.

a

b1

b2

b3

b4 L

B

DRV 18 EL + 21 S

54

102

56

46

250

70

48

DRV 19 EL + 22 S

63

119

76

46

300

70

70

Flange connection measurement Hole pattern 58 54 x 30 54 x 54

Hole pattern 2 4 4

Ø 8 8

Special aggregates, terms of sale

Size chart

Oil burner nozzles

Description: 4 Regulating screw | 9 Valve Cone | 10 Piston | 11 Spring

25

hp

TECHNIK

Overflow valves

www.hptechnik.com

hp-Overflow valve with flange connection for SAE connection

2.4

Mode of operation E; with adjustment screw For lubricating and hydraulic oils and many other self-lubricating, non-corrosive fluids. Maximum temperature of delivery fluid: 150° C. Material: casing of hydraulic cast iron GGG 40 with certificate 3.1 B Piston, valve tip, spring of hardened steel. Action: directly controlled, spring-loaded overflow valve to maintain a set operating pressure or a set maximum pressure.

Type

Pressure stage

B - G - E - SAE 1/2 B - GH - E - SAE 3/4“ B - GHG - E - SAE 1“

2 = 2 - 9 bar 3 = 15 - 25 bar 4 = 15 - 40 bar

SAE-Flange connection G 1/2“ G 3/4“ G1“

Flow rate I/h 30 - 600 100 - 2000 300 - 6000

Viscosity stage cSt 2,8 to 480 2,8 to 480 2,8 to 480

Articleno. 027 0210 027 0220 027 0230

Weight kg 2,30 4,10 6,30

Model equipped with regulating screw Turning the pressure regulating screw to the right (clockwise) with a hexagon screwdriver will increase the pressure and turning it to the left (counterclockwise) will reduce the pressure.

26

Size 1/2“

SAE Flange connection A B 38,1 17,5

M M8

G1/4“

3/4“

47,6

22,2

M 10

G1/4“

1“

52,4

26,2

M 10

Size chart

a

b1

c1

d1

d3

f1

f2

BG - E - SAE 1/2“

55

51

37

68

54

Ø 13

G1/4“

BGH - E - SAE 3/4“

63

57

43

88

65

Ø 19

BGH - E - SAE 1“

80

69

68

102

68

Ø 25

TECHNIK

www.hptechnik.com

Overflow valves

hp-Pressure regulating valve, type BV

Industrial pumps, overflow valves

hp

2.5

Type BV

Motor pump program, motor pump groups

The BV-valve operates in the same way as a pressure relief valve. Oil is led to the supply side P and the spring/piston V ensures constant pressure by leading the oil through the hole in piston to return side R. The system pressure can be adjusted on the setting screw P1 (under plug).

cSt. (mm-2/s) l/h bar bar °C °C °C

1.3-700 300-2000 2-9 / 6-25 / 15- 40 Min. pressure 3,8 kg 180 -10 to +90 -20 to +60

Feed pumps and delivery aggregates

BV-valve Viscosity stage (measured in suction inlet) Flow rate Pressure stages Factory setting Weight Max. oil temperature Ambient temperature Storage temperature

Aggregates for singlepipe installation

Application and features • Design in GGG 40 cast iron in accordance with the certification authorities • Light and heavy oil • Hydraulic and lubricating oil

Special aggregates, terms of sale

Oil burner nozzles

Accessories and spare sparts

Connections R Return 3/4” P Pressure outlet 3/4” Pn Pressure gauge port 1/4” P1 Pressure adjustment (under plug)

27

hp

TECHNIK

Overflow valves

www.hptechnik.com

hp-Pressure and flow regulating valve, type B-PRO

2.6

Type B-Pro B-PRO-valves are designed to control pressure and flow. They are available in 4 sizes with capacities up to 2000 l/h. B-PRO-valves are typically used in connection with spill-back nozzles where pressure and flow in the return line determine the nozzle capacity.

Size cSt. (mm-2/s) bar bar kg °C °C °C

B-PRO Viscosity stage (measured in suction inlet) Pressure stages Factory setting Weight Max. oil temperature Ambient temperature Storage temperature

B-PP-PRO

B-P-PRO

B-G-PRO 1.3-700 2-22 or 5-45 Min. pressure 1.2 1.2 180 -10 to +90 -20 to +60

0.6

B-GH-Pro

2.6

Capacity Type B-PP-PRO B-P-PRO B-G-PRO B-GH-PRO

Minimum in l/h 20 45 90 300

Nominal in l/h 60 160 300 1000

Maximum in l/h 120 300 600 2000

Connections R Return to tank P Pressure outlet Pn Pressure gauge port P1 Pressure and flow setting

Type B-PP-PRO B-P-PRO B-G-PRO B-GH-PRO

28

a1 73 90 90 121

a3 10 12 12 17

a4 8 10 10 12

c1 R1/8” R1/8” R1/8” R1/4”^

c2 R1/4”^ R3/8”^ R3/8” R3/4”

c5 12 15 15 20

c6 43 65 65 63

c7 34 37 37 48

d1 26 32 32 50

d2 5.5 6.2 6.2 8.4

e1 40 55 55 70

f1 40 51 51 70

H 6 10 10 12

r 8 8 8 12.5

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Flow characteristics Δ p - Q for hp overflow valves

Series B - P - E Accessories and spare sparts

www.hptechnik.com

Oil burner nozzles

TECHNIK

Special aggregates, terms of sale

hp

2.7

Industrial pumps, overflow valves

Overflow valves

Series B - PP - E

29

hp

TECHNIK

www.hptechnik.com

Flow characteristics Δ p - Q for hp overflow valves Series B - G - E and FDR 15 - E

Series B - GH - E and FDR 20 - E

30

Overflow valves 2.7

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Flow characteristics Δ p - Q for hp overflow valves

Series B - GHG 11/4‘‘- E and FDR 32 - E Accessories and spare sparts

www.hptechnik.com

Oil burner nozzles

TECHNIK

Special aggregates, terms of sale

hp

2.7

Industrial pumps, overflow valves

Overflow valves

Series B - GHG - E and FDR 25 - E

31

hp

TECHNIK

www.hptechnik.com

Fairs

We would be pleased to welcome you at our stand 2011 or at one of the next fairs

Frankfurt 15.–10.3.2011

Our employees of sales visit all other important fair- trades and look forward to see you again. They would be pleased if you send us an E-Mail or give us a call.

Phone +49 (0) 721/ 956 18-0 l E-Mail [email protected]

32

Motor pump program

www.hptechnik.com

TECHNIK

hp-Motor pumps; series SMG

Industrial pumps, overflow valves

hp

3.0

Horizontal single system with hp industrial pumps with axial face seal able to handle pressures up to 5 bar and max. 150 °C. Easy to operate. Very safe. Exceptionally quiet. High suction capacity and operating life.

When used:

Motor pump program, motor pump groups

When used as supply aggregate for fuel oil feed as per DIN 4736, the max operating pressure may not exceed 6 bar2). as discharge or supply unit; designed for pressures of up to 9 bar. as pressure or spray unit; designed for pressures of up to 30 bar. for higher pressures; designed for pressures of up to 40 bar.

The pump groups are equipped whith three-phase standard motors B3/B14 or B3/B5, 400 V, 50 Hz, 1400 min -1, protection standard IP 54, Isolation class F. From 4 kW, the motors are threaded for 400/690 V, 50 Hz. Y-∆-cirquit with power supply must be indicated when ordering. Other voltages and frequencies are available at a surcharge upon request.

Aggregates for singlepipe installation

Mounting position: horizontal, with the connections facing upwards. These motor pump groups can be equipped with all pumps of the approved hp-Industrial pump programme.

Key for determination of the order numbers:

Series size

e. g. SMG 1507 See selection chart on the following sites…

–

– Direction of rotation 1) viewed from pump shaft

I = counterclockwise, standard model D = clockwise on request

– Pressure stage bar

Special production and accessories (add code letters consecutively)

0 = 0,5 - 1,5

H1 = Electric heating with heating cartridge, see tables for heating capacity. (See pump accessories page 16.)

1=1-4

Wa = With oil pan and anti-vibration pads for mounting on the wall. (See accessories page 38.)

2=2-9

LH = Oil pan equipped with leak detection

3 = 6 - 25

S2) = With electric pressure switch for pressure line monitoring. (Pipe-burst check.)

4 = 15 - 40

Feed pumps and delivery aggregates

SMG . . .

Accessories and spare sparts

e.g.:

DT = Pressure transmitter

Oil burner nozzles

Max. permissible vacuum pressure at pump connection A -0.6 bar. Warning, gas discharge starts at -0.4 bar

Special aggregates, terms of sale

Ordering example: hp motor pump group series size SMG 1568 with hp industrial pump type VBHP-I with integrated overflow valve; direction of rotation viewed from pump shaft: I = counterclockwise; flow rate: 700 l/h at 1400 min -1 and 25 bar; operating pressure: 25 bar; pressure range: 15 to 25 bar; max. pressure: 25 bar; medium: fuel oil S; viscosity: 6 cSt. at 140 °C; motor output: 1,5 kW, voltage 230/400V, 50Hz, isolation class B; protection standard: IP 54; accessories: axial face seal Viton V, electric heating H1. Order-Nr.: SMG 1568 - I - 3 - H1 For assembly, start-up and maintenance, please adhere to the instruction manual that comes with each device!

33

hp

TECHNIK

Motor pump program

www.hptechnik.com

hp-Motor pump groups; SMG series

3.1

Series B; without overflow valve S=

Single systems with 1400 min and hp industrial pumps. -1

sure pres A=

Suitable for use with hydraulic oils, lubricating oils, all fuel oils, coal and lignite tar oils, kerosene and many other self-lubricating fluids. The motor output data applies for fluids with a viscosity of up to 80 cSt. From 80 to 150 cSt, the motor must be one power stage stronger. Available at a surcharge upon request.

on sucti

The pump connections are indicated as follows: A = suction connection S = delivery connection The standard models of the pumps are designed with a counterclockwise direction of rotation (viewed from the pump shaft). The position of the pump connections is independent of the direction of rotation. (See illustration.) Direction of rotation l = counterclockwise, standard model For clockwise rotation, D, the oil connections A = suction and S = delivery are interchanged. Series size

Pump type

Discharge at 1400 min -1 at 0 - 9 bar at 30 bar

Motor output

Connections 1)

*

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1501 SMG 1502 SMG 1503 SMG 1504 SMG 1505 SMG 1506 SMG 1507 SMG 1508 SMG 1509 SMG 1510 SMG 1511 SMG 1512 SMG 1513

BP BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM BHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

– – – – – – – – – – – – –

0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 11/2“ G 11/2“ G 11/2“

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0350001 0350002 0350003 0350004 0350005 0350006 0350007 0350008 0350009 0350010 0350011 0350012 0350013

pmax 9 bar

SMG 1521 SMG 1522 SMG 1523 SMG 1524 SMG 1525 SMG 1526 SMG 1527 SMG 1528 SMG 1529 SMG 1530 SMG 1531 SMG 1532 SMG 1533

BP BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM BHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

30 l/h 60 l/h 100 l/h 140 l/h 240 l/h 390 l/h 540 l/h 700 l/h 1200 l/h 1700 l/h 2200 l/h 3600 l/h 4800 l/h

0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1 1/2“ G 1 1/2“ G 1 1/2“

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0350014 0350015 0350016 0350017 0350018 0350019 0350020 0350021 0350022 0350023 0350024 0350025 0350026

pmax 30 bar

Series size

Pump type

Discharge at 1400 min -1 at 0 bar at 40 bar

Motor output

Connections

H1 Heater Watt

Gear rotor/shaft

Article-no.

BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM

80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h

0,18 kW 0,37 kW 0,37 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1 1/2“ G 1 1/2“

100 100 100 100 100 100 160 160 160 280 280

25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22

0390001 0390002 0390003 0390004 0390005 0390006 0390007 0390008 0390009 0390010 0390011

SMG 1902 SMG 1903 SMG 1904 SMG 1905 SMG 1906 SMG 1907 SMG 1908 SMG 1909 SMG 1910 SMG 1911 SMG 1912

50 l/h 80 l/h 120 l/h 200 l/h 360 l/h 480 l/h 600 l/h 1000 l/h 1400 l/h 2000 l/h 3200 l/h

1)

*

1) Cyl. Withworth Pipe Threading: G…A DIN ISO 228 * To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

34

p max 40 bar

TECHNIK

Motor pump program

www.hptechnik.com

3.1

Motor output

a

a1

b

c

e1

f3

g

Dimensions g1

g2

h

k

k1

p

s

Pg

SMG 1501 SMG 1502 SMG 1503 SMG 1504 SMG 1505 SMG 1506 SMG 1507 SMG 1508 SMG 1509 SMG 1510 SMG 1511 SMG 1512 SMG 1513

BP BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM BHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

80 80 80 80 80 90 90 100 100 100 125 140 140

36 36 36 36 36 43 43 49 49 49 65 65 65

100 100 100 100 100 112 112 125 125 140 140 160 160

7 7 7 7 7 7 7 8 8 13 13 14 14

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 11/2“ G 11/2“ G 11/2“

38 38 38 38 44 44 44 67 67 67 100 100 100

124 124 124 124 124 139 139 157 157 181 181 202 202

43 43 43 43 43 43 43 65 65 65 90 90 90

– – – – – – – – – 137 137 150 150

63 63 63 63 63 71 71 80 80 90 90 100 100

348 348 348 348 362 390 390 496 496 531 617 657 657

63 63 63 63 63 69 69 77 77 92 95 103 103

163 163 163 163 163 180 180 197 197 214 214 235 235

7 7 7 7 7 7 7 9,5 9,5 11 11 13 13

11 11 11 11 11 11 11 11 11 13,5 13,5 16 16

SMG 1521 SMG 1522 SMG 1523 SMG 1524 SMG 1525 SMG 1526 SMG 1527 SMG 1528 SMG 1529 SMG 1530 SMG 1531 SMG 1532 SMG 1533

BP BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM BHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

80 80 80 90 90 100 100 125 140 140 140 140 140

36 36 36 36 43 43 43 49 49 49 65 65 65

100 100 100 112 112 125 125 140 160 160 190 216 216

7 7 7 7 7 8 8 13 14 14 15 17 17

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 11/2“ G 11/2“ G 11/2“

38 38 38 38 44 44 44 67 67 67 100 100 100

124 124 124 139 139 157 157 181 202 202 227 267 267

43 43 43 43 43 43 43 65 65 65 90 90 90

– – – – – – – 137 150 150 150 183 183

63 63 63 71 71 80 80 90 100 100 112 132 132

348 348 348 376 390 423 423 531 595 595 679 740 740

63 63 63 69 69 77 77 92 110 110 118 140 140

163 163 163 180 180 197 197 214 235 235 269 308 308

7 7 7 7 7 9,5 9,5 11 13 13 13 13 13

11 11 11 11 11 11 11 13,5 16 16 16 21 21

SMG 1902 SMG 1903 SMG 1904 SMG 1905 SMG 1906 SMG 1907 SMG 1908 SMG 1909 SMG 1910 SMG 1911 SMG 1912

BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM

80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h

0,18 kW 0,37 kW 0,37 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

80 90 90 100 100 125 140 140 140 140 178

36 36 36 43 43 43 49 49 49 65 65

100 112 112 125 140 140 160 160 190 216 216

7 7 7 8 13 13 14 14 15 17 17

G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 11/2“ G 11/2“

38 38 38 44 44 44 67 67 67 100 100

124 139 139 157 181 181 202 202 227 267 267

43 43 43 43 43 43 65 65 65 90 90

– – – – – – 150 150 163 189 189

63 71 71 80 90 90 100 100 112 132 132

348 376 376 423 440 440 595 595 617 740 740

63 69 69 77 92 92 110 110 118 140 140

163 180 180 197 214 214 235 235 269 308 308

7 7 7 9,5 11 11 13 13 13 13 13

11 11 11 11 13,5 13,5 16 16 16 21 21

Accessories and spare sparts

Discharge

Oil burner nozzles

Pump type

Special aggregates, terms of sale

Series size

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Series B; without overflow valve

Industrial pumps, overflow valves

hp

35

hp

TECHNIK

Motor pump program

www.hptechnik.com

hp-Motor pump group; SMG series

3.2

Series VB with integrated overflow valve

ssure S = pre tion A = suc

Single systems with 1400 min -1 and hp industrial pumps. Standard model: A system up to 9 bar: Pressure stage 2 = 2 to 9 bar. Limited to a max. pressure of 6 bar as per DIN 4736. System up to 30 or 40 bar: Pressure stage 4 = 15 to 40 bar. Suitable for use with hydraulic oils, lubricating oils, all fuel oils, coal and lignite tar oils, kerosene and many other self-lubricating fluids. The motor output data applies for fluids with a viscosity of up to 80 cSt. From 80 to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request. The pump connections are indicated as follows: A = suction connection

S = delivery connection

The standard models of the pumps are designed with a counterclockwise direction of rotation (viewed from the pump shaft). The position of the pump connections is independent of the direction of rotation. (See illustration.) Direction of rotation l = counterclockwise, standard model For clockwise rotation, D, the oil connections A = suction and S = delivery are interchanged

Series size

Pump type

Discharge at 1400 min -1 at 0 - 9 bar at 30 bar

Motor output

Connections*

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1541 SMG 1542 SMG 1543 SMG 1544 SMG 1545 SMG 1546 SMG 1547 SMG 1548 SMG 1549 SMG 1550 SMG 1551 SMG 1552 SMG 1553

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

– – – – – – – – – – – – –

0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0350027 0350028 0350029 0350030 0350031 0350032 0350033 0350034 0350035 0350036 0350037 0350038 0350039

p max 9 bar

SMG 1561 SMG 1562 SMG 1563 SMG 1564 SMG 1565 SMG 1566 SMG 1567 SMG 1568 SMG 1569 SMG 1570 SMG 1571 SMG 1572 SMG 1573

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

30 l/h 60 l/h 100 l/h 140 l/h 240 l/h 390 l/h 540 l/h 700 l/h 1200 l/h 1700 l/h 2200 l/h 3600 l/h 4800 l/h

0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0350040 0350041 0350042 0350043 0350044 0350045 0350046 0350047 0350048 0350049 0350050 0350051 0350052

p max 30 bar

Series size

Pump type

Discharge at 1400 min -1 at 0 bar at 40 bar

Motor output

connections*

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1922 SMG 1923 SMG 1924 SMG 1925 SMG 1926 SMG 1927 SMG 1928 SMG 1929 SMG 1930 SMG 1931 SMG 1932

VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM

80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h

0,18 kW 0,37 kW 0,37 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“

100 100 100 100 100 100 160 160 160 280 280

25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22

0390023 0390024 0390025 0390026 0390027 0390028 0390029 0390030 0390031 0390032 0390033

50 l/h 80 l/h 120 l/h 200 l/h 360 l/h 480 l/h 600 l/h 1000 l/h 1400 l/h 2000 l/h 3200 l/h

p max 40 bar

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

36

TECHNIK

Motor pump program

www.hptechnik.com

3.2

Motoroutput

a

a1

b

c

e1

f3

g

Dimensions g1

g2

h

k

k1

p

s

Pg

SMG 1541 SMG 1542 SMG 1543 SMG 1544 SMG 1545 SMG 1546 SMG 1547 SMG 1548 SMG 1549 SMG 1550 SMG 1551 SMG 1552 SMG 1553

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VGHGP VBHGM VBHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

80 80 80 80 80 90 90 100 100 100 125 140 140

36 36 36 36 43 43 43 49 49 49 65 65 65

100 100 100 100 100 112 112 125 125 140 140 160 160

7 7 7 7 7 7 7 8 8 13 13 14 14

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

38 38 38 38 44 44 44 67 67 67 80 80 80

124 124 124 124 124 139 139 157 157 181 181 202 202

67 67 67 67 75 75 75 90 90 90 120 120 120

– – – – – – – – – 137 137 150 150

63 63 63 63 63 71 71 80 80 90 90 100 100

348 348 348 348 362 390 390 496 496 531 617 657 657

63 63 63 63 63 69 69 77 77 92 95 103 103

163 163 163 163 163 180 180 197 197 214 214 235 235

7 7 7 7 7 7 7 9,5 9,5 11 11 13 13

11 11 11 11 11 11 11 11 11 13,5 13,5 16 16

SMG 1561 SMG 1562 SMG 1563 SMG 1564 SMG 1565 SMG 1566 SMG 1567 SMG 1568 SMG 1569 SMG 1570 SMG 1571 SMG 1572 SMG 1573

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

80 80 80 90 90 100 100 125 140 140 140 140 140

36 36 36 36 43 43 43 49 49 49 65 65 65

100 100 100 112 112 125 125 140 160 160 190 216 216

7 7 7 7 7 8 8 13 14 14 15 17 17

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

38 38 38 38 44 44 44 67 67 67 80 80 80

124 124 124 139 139 157 157 181 202 202 227 267 267

67 67 67 67 75 75 75 90 80 90 120 120 120

– – – – – – – 137 150 150 150 183 183

63 63 63 71 71 80 80 90 100 100 112 132 132

348 348 348 376 390 423 423 531 595 595 679 740 740

63 63 63 69 69 77 77 92 110 110 118 140 140

163 163 163 180 180 197 197 214 235 235 269 308 308

7 7 7 7 7 9,5 9,5 11 13 13 13 13 13

11 11 11 11 11 11 11 13,5 16 16 16 21 21

SMG 1922 SMG 1923 SMG 1924 SMG 1925 SMG 1926 SMG 1927 SMG 1928 SMG 1929 SMG 1930 SMG 1931 SMG 1932

VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM

80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h

0,18 kW 0,37 kW 0,37 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

80 90 90 100 100 125 140 140 140 140 178

36 36 36 43 43 43 49 49 49 65 65

100 112 112 125 140 140 160 160 190 216 216

7 7 7 8 13 13 14 14 15 17 17

G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“

38 38 38 44 44 44 67 67 67 80 80

124 139 139 157 181 181 202 202 227 267 267

67 67 67 75 75 75 90 90 90 120 120

– – – – – – 150 150 163 189 189

63 71 71 80 90 90 100 100 112 132 132

348 376 376 423 440 440 595 595 617 740 740

63 69 69 77 92 92 110 110 118 140 140

163 180 180 197 214 214 235 235 269 308 308

7 7 7 9,5 11 11 13 13 13 13 13

11 11 11 11 13,5 13,5 16 16 16 21 21

Accessories and spare sparts

Discharge

Oil burner nozzles

Pump type

Special aggregates, terms of sale

Series size

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Series VB; With integrated overflow valve

Industrial pumps, overflow valves

hp

37

hp

TECHNIK

Motor pump program

www.hptechnik.com

hp-Motor pump group; SMG series

3.3

Series VBR with integrated overflow valve and bypass

S = pressure

Single system with1400 min -1 and hp industrial pumps

R = Bypass

Standard model: System up to 9 bar: Pressure stage 2 = 2 to 9 bar. Limited to a max. pressure of 6 bar as per DIN 4736. System up to 30 or 40 bar: Pressure stage 4 =15 to 40 bar. The pump connections are indicated as follows: A = suction connection S = delivery connection

R = bypass connection A = suction

The standard models of the pumps are designed with a counterclockwise direction of rotation (viewed from the pump shaft). The position of the pump connections is independent of the direction of rotation. (See illustration.) Direction of rotation l = counterclockwise, standard model For clockwise rotation, D, the oil connections S = delivery and R = bypass are interchanged. The suction connection A = suction is found on the other side.

Series size

Pump type

Discharge at 1400 min -1 at 0 - 9 bar at 30 bar

Motoroutput

Connections*

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1601 SMG 1602 SMG 1603 SMG 1604 SMG 1605 SMG 1606 SMG 1607 SMG 1608 SMG 1609 SMG 1610 SMG 1611 SMG 1612 SMG 1613

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

– – – – – – – – – – – – –

0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ 1) G 1“ 1) G 1“ 1)

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0360001 0360002 0360003 0360004 0360005 0360006 0360007 0360008 0360009 0360010 0360011 0360012 0360013

p max 9 bar

SMG 1621 SMG 1622 SMG 1623 SMG 1624 SMG 1625 SMG 1626 SMG 1627 SMG 1628 SMG 1629 SMG 1630 SMG 1631 SMG 1632 SMG 1633

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

30 l/h 60 l/h 100 l/h 140 l/h 240 l/h 390 l/h 540 l/h 700 l/h 1200 l/h 1700 l/h 2200 l/h 3600 l/h 4800 l/h

0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ 1) G 1“ 1) G 1“ 1)

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0360014 0360015 0360016 0360017 0360018 0360019 0360020 0360021 0360022 0360023 0360024 0360025 0360026

p max 30 bar

Series size

Pump type

Discharge at 1400 min -1 at 0 bar at 40 bar

Motoroutput

Connections

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1942 SMG 1943 SMG 1944 SMG 1945 SMG 1946 SMG 1947 SMG 1948 SMG 1949 SMG 1950 SMG 1951 SMG 1952

VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM

80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h

0,18 kW 0,37 kW 0,37 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ 1) G 1“ 1)

100 100 100 100 100 100 160 160 160 280 280

25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22

0390045 0390046 0390047 0390048 0390049 0390050 0390051 0390052 0390053 0390054 0390055

50 l/h 80 l/h 120 l/h 200 l/h 360 l/h 480 l/h 600 l/h 1000 l/h 1400 l/h 2000 l/h 3200 l/h

1)

*

1) The suction connection on the side is A = G 1 1/2“ on SMG 1611 - SMG 1631, SMG 1631 - 1630, SMG 1951 - 1952. * To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

38

p max 40 bar

TECHNIK

Motor pump program

www.hptechnik.com

3.3

Motor output

a

a1

b

c

e1

f3

g

Dimensions g1

g2

h

k

k1

p

s

Pg

SMG 1601 SMG 1602 SMG 1603 SMG 1604 SMG 1605 SMG 1606 SMG 1607 SMG 1608 SMG 1609 SMG 1610 SMG 1611 SMG 1612 SMG 1613

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

80 80 80 80 80 90 90 100 100 100 125 140 140

36 36 36 36 43 43 43 49 49 49 65 65 65

100 100 100 100 100 112 112 125 125 140 140 160 160

7 7 7 7 7 7 7 8 8 13 13 14 14

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ 1) G 1“ 1) G 1“ 1)

38 38 38 38 44 44 44 67 67 67 80 80 80

124 124 124 124 124 139 139 157 157 181 181 202 202

90 90 90 90 94 94 94 115 115 115 120 120 120

– – – – – – – – – 137 137 150 150

63 63 63 63 63 71 71 80 80 90 90 100 100

348 348 348 348 362 390 390 496 496 531 617 657 657

63 63 63 63 63 69 69 77 77 92 95 103 103

163 163 163 163 163 180 180 197 197 214 214 235 235

7 7 7 7 7 7 7 9,5 9,5 11 11 13 13

11 11 11 11 11 11 11 11 11 13,5 13,5 16 16

SMG 1621 SMG 1622 SMG 1623 SMG 1624 SMG 1625 SMG 1626 SMG 1627 SMG 1628 SMG 1629 SMG 1630 SMG 1631 SMG 1632 SMG 1633

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h 6000 l/h

0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

80 80 80 90 90 100 100 125 140 140 140 140 140

36 36 36 36 43 43 43 49 49 49 65 65 65

100 100 100 112 112 125 125 140 160 160 190 216 216

7 7 7 7 7 8 8 13 14 14 15 17 17

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ 1) G 1“ 1) G 1“ 1)

38 38 38 38 44 44 44 67 67 67 80 80 80

124 124 124 139 139 157 157 181 202 202 227 267 267

90 90 90 90 94 94 94 115 115 115 120 120 120

– – – – – – – 137 150 150 150 183 183

63 63 63 71 71 80 80 90 100 100 112 132 132

348 348 348 376 390 423 423 531 595 595 679 740 740

63 63 63 69 69 77 77 92 110 110 118 140 140

163 163 163 180 180 197 197 214 235 235 269 308 308

7 7 7 7 7 9,5 9,5 11 13 13 13 13 13

11 11 11 11 11 11 11 13,5 16 16 16 21 21

SMG 1942 SMG 1943 SMG 1944 SMG 1945 SMG 1946 SMG 1947 SMG 1948 SMG 1949 SMG 1950 SMG 1951 SMG 1952

VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM

80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h 3000 l/h 4500 l/h

0,18 kW 0,37 kW 0,37 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

80 90 90 100 100 125 140 140 140 140 178

36 36 36 43 43 43 49 49 49 65 65

100 112 112 125 140 140 160 160 190 216 216

7 7 7 8 13 13 14 14 15 17 17

G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ 1) G 1“ 1)

38 38 38 44 44 44 67 67 67 80 80

124 139 139 157 181 181 202 202 227 267 267

90 90 90 94 94 94 115 115 115 120 120

– – – – – – 150 150 163 189 189

63 71 71 80 90 90 100 100 112 132 132

348 376 376 423 440 440 595 595 617 740 740

63 69 69 77 92 92 110 110 118 140 140

163 180 180 197 214 214 235 235 269 308 308

7 7 7 9,5 11 11 13 13 13 13 13

11 11 11 11 13,5 13,5 16 16 16 21 21

Accessories and spare sparts

Discharge

Oil burner nozzles

Pump type

Special aggregates, terms of sale

Series size

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Series VBR; with integrated overflow valves and bypass

Industrial pumps, overflow valves

hp

1) For SMG 1611 - 1613, SMG 1631 - 1633, SMG 1951 - 1952 the suction connection is A = G 1 1/2“

39

hp

TECHNIK

Motor pump program

www.hptechnik.com

hp-Motor pump group; SMG series

3.4

Series NV with integrated overflow valve and bypass

S = pressure

Single systems 1400 min -1 and hp industrial pumps.

R = bypass A = suction

Standard model: System up to 9 bar: Pressure stage 2 = 2 to 9 bar. Limited as per DIN 4736 to 6 bar. System up to 30 or 40 bar: Pressure stage 4 = 15 to 40 bar. Suitable for use with hydraulic oils, lubricating oils, all fuel oils, coal and lignite tar oils, kerosene and many other self-lubricating fluids. The motor output data applies for fluids with a viscosity of up to 80 cSt. From 80 to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request. The pump connections are indicated as follows: A = suction connection S = delivery connection R = bypass connection The standard model of the pumps is designed with a counterclockwise direction of rotation (viewed from the pump shaft). The position of the pump connections is independent of the direction of rotation. (See illustration.) Direction of rotation l = counterclockwise, standard model For clockwise rotation, D, the connections A = suction and S = delivery are interchanged. The middle connection remains unchanged. Series size

Pump type

Discharge at 1400 min -1 at 0 - 9 bar at 30 bar

Motor output

Connections

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1701 SMG 1702 SMG 1703 SMG 1704

NVBRP NVBRM NVBRG NVBRF

45 l/h 80 l/h 120 l/h 160 l/h

– – – –

0,18 kW 0,18 kW 0,18 kW 0,18 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“

100 100 100 100

25/12 25/12 25/12 25/12

0370001 0370002 0370003 0370004

SMG 1705 SMG 1706 SMG 1707

NVBGRP NVBGRM NVBGRG

300 l/h 450 l/h 600 l/h

– – –

0,18 kW 0,37 kW 0,37 kW

G 1/2“ G 1/2“ G 1/2“

100 100 100

38/12 38/12 38/12

0370005 0370006 0370007

SMG 1708 SMG 1709 SMG 1710

NVBHRP NVBHRM NVBHRG

1000 l/h 1500 l/h 2000 l/h

– – –

0,75 kW 0,75 kW 1,1 kW

G 3/4“ G 3/4“ G 3/4“

160 160 160

56/18 56/18 56/18

0370008 0370009 0370010

SMG 1721 SMG 1722 SMG 1723 SMG 1724 SMG 1725 SMG 1726 SMG 1727

NVBRP NVBRM NVBRG NVBRF NVBGRP NVBGRM NVBGRG

45 l/h 80 l/h 120 l/h 160 l/h 300 l/h 450 l/h 600 l/h

30 l/h 60 l/h 100 l/h 140 l/h 240 l/h 390 l/h 540 l/h

0,18 kW 0,18 kW 0,18 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“

100 100 100 100 100 100 100

25/12 25/12 25/12 25/12 38/12 38/12 38/12

0370011 0370012 0370013 0370014 0370015 0370016 0370017

SMG 1728 SMG 1729 SMG 1730

NVBHRP NVBHRM NVBHRG

1000 l/h 1500 l/h 2000 l/h

700 l/h 1200 l/h 1700 l/h

1,5 kW 2,2 kW 3,0 kW

G 3/4“ G 3/4“ G 3/4“

160 160 160

56/18 56/18 56/18

0370018 0370019 0370020

Series size

Pump type

Discharge at 1400 min -1 at 0 bar at 40 bar

Motor output

Connections

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1962 SMG 1963 SMG 1964

NVBRM NVBRG NVBRF

80 l/h 120 l/h 160 l/h

50 l/h 80 l/h 120 l/h

0,18 kW 0,37 kW 0,37 kW

G 3/8“ G 3/8“ G 3/8“

100 100 100

25/12 25/12 25/12

0390067 0390068 0390069

SMG 1965 SMG 1966 SMG 1967 SMG 1968 SMG 1969 SMG 1970

NVBGRP NVBGRM NVBGRG NVBHRP NVBHRM NVBHRG

300 l/h 450 l/h 600 l/h 1000 l/h 1500 l/h 2000 l/h

200 l/h 360 l/h 480 l/h 600 l/h 1000 l/h 1400 l/h

0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW

G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“

100 100 100 160 160 160

38/12 38/12 38/12 56/18 56/18 56/18

0390070 0390071 0390072 0390073 0390074 0390075

1)

1)

*

*

1) Cyl. Withworth pipe threading: G…A DIN ISO 228 * To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

40

p max 9 bar

p max 30 bar

p max 40 bar

TECHNIK

Motor pump program

www.hptechnik.com

3.4

Motor output

a

a1

b

c

e1

f3

g

Dimensions g1

g2

h

k

k1

p

s

Pg

SMG 1701 SMG 1702 SMG 1703 SMG 1704 SMG 1705 SMG 1706 SMG 1707 SMG 1708 SMG 1709 SMG 1710

NVBRP 45 l/h 0,18 kW NVBRM 80 l/h 0,18 kW NVBRG 120 l/h 0,18 kW NVBRF 160 l/h 0,18 kW NVBGRP 300 l/h 0,18 kW NVBGRM 450 l/h 0,37 kW NVBGRG 600 l/h 0,37 kW NVBHRP 1000 l/h 0,75 kW NVBHRM 1500 l/h 0,75 kW NVBHRG 2000 l/h 1,1 kW

80 80 80 80 80 90 90 100 100 100

36 36 36 36 43 43 43 49 49 49

100 100 100 100 100 112 112 125 125 140

7 7 7 7 7 7 7 8 8 13

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“

32,5 32,5 32,5 32,5 35 35 35 50 50 50

124 124 124 124 124 139 139 157 157 181

67 67 67 67 72 72 72 105 105 105

– – – – – – – – – 137

63 63 63 63 63 71 71 80 80 90

348 348 348 348 362 390 390 496 496 531

63 63 63 63 63 69 69 77 77 92

163 163 163 163 163 180 180 197 197 214

7 7 7 7 7 7 7 9,5 9,5 11

11 11 11 11 11 11 11 11 11 13,5

SMG 1721 SMG 1722 SMG 1723 SMG 1724 SMG 1725 SMG 1726 SMG 1727 SMG 1728 SMG 1729 SMG 1730

NVBRP 45 l/h 0,18 kW NVBRM 80 l/h 0,18 kW NVBRG 120 l/h 0,18 kW NVBRF 160 l/h 0,37 kW NVBGRP 300 l/h 0,37 kW NVBGRM 450 l/h 0,75 kW NVBGRG 600 l/h 0,75 kW NVBHRP 1000 l/h 1,5 kW NVBHRM 1500 l/h 2,2 kW NVBHRG 2000 l/h 3,0 kW

80 80 80 90 90 100 100 125 140 140

36 36 36 36 43 43 43 49 49 49

100 100 100 112 112 125 125 140 160 160

7 7 7 7 7 8 8 13 14 14

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“

32,5 32,5 32,5 32,5 35 35 35 50 50 50

124 124 124 139 139 157 157 181 202 202

67 67 67 67 72 72 72 105 105 105

– – – – – – – 137 150 150

63 63 63 71 71 80 80 90 100 100

348 348 348 376 390 423 423 531 595 595

63 63 63 69 69 77 77 92 110 110

163 163 163 180 180 197 197 214 235 235

7 7 7 7 7 9,5 9,5 11 13 13

11 11 11 11 11 11 11 13,5 16 16

SMG 1962 SMG 1963 SMG 1964 SMG 1965 SMG 1966 SMG 1967 SMG 1968 SMG 1969 SMG 1970

NVBRM 80 l/h 0,18 kW NVBRG 120 l/h 0,37kW NVBRF 160 l/h 0,37 kW NVGRP 300 l/h 0,75 kW NVBGRM 450 l/h 0,75 kW NVBGRG 600 l/h 1,1 kW NVBHRP 1000 l/h 2,2 kW NVBHRM 1500 l/h 3,0 kW NVBHRG 2000 l/h 4,0 kW

80 90 90 100 100 100 140 140 140

36 36 36 43 43 43 49 49 49

100 112 112 125 125 140 160 160 190

7 7 7 8 8 13 14 14 15

G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“

32,5 32,5 32,5 35 35 35 50 50 50

124 139 139 157 157 181 202 202 227

67 67 67 75 75 75 105 105 105

– – – – – – 150 150 163

63 71 71 80 80 90 100 100 112

348 376 376 423 423 440 595 595 617

63 69 69 77 77 92 110 110 118

163 180 180 197 197 214 235 235 269

7 7 7 9,5 9,5 11 13 13 13

11 11 11 11 11 13,5 16 16 16

Accessories and spare sparts

Discharge

Oil burner nozzles

Pump type

Special aggregates, terms of sale

Series size

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Series NV; with integrated overflow valve and bypass

Industrial pumps, overflow valves

hp

41

hp

TECHNIK

Motor pump program

www.hptechnik.com

hp-Motor pump group; SMG series

3.5

Series B without overflow valve S=

Single systems with 950 min -1 and hp industrial pumps.

ure press A=

Suitable for use with hydraulic oils, lubricating oils, all fuel oils, coal and lignite tar oils, kerosene and many other self-lubricating fluids. The motor output data applies for fluids with a viscosity of up to 400 cSt. From 400 to 1000 cSt, the motor must be one power stage stronger. Available at a surcharge upon request.

n suctio

The pump connections are indicated as follows: A = suction connection S = delivery connection The standard model of the pumps is designed with a counterclockwise direction of rotation (viewed from the pump shaft). The position of the pump connections is independent of the direction of rotation. (See illustration.) Direction of rotation l = counterclockwise, standard model For clockwise rotation, D, the connections A = suction and S = delivery are interchanged

Series size

Pump type

Discharge at 950 min -1 at 0 - 9 bar at 30 bar

Motor output

Connections 1)

*

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1801 SMG 1802 SMG 1803 SMG 1804

BP BM BG BF

30 l/h 55 l/h 80 l/h 105 l/h

– – – –

0,37 kW 0,37 kW 0,37 kW 0,37 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“

100 100 100 100

25/12 25/12 25/12 25/12

0380001 0380002 0380003 0380004

SMG 1805 SMG 1806 SMG 1807

BGP BGM BGG

200 l/h 300 l/h 400 l/h

– – –

0,37 kW 0,37 kW 0,37 kW

G 1/2“ G 1/2“ G 1/2“

100 100 100

38/12 38/12 38/12

0380005 0380006 0380007

SMG 1808 SMG 1809 SMG 1810

BHP BHM BHG

670 l/h 1000 l/h 1330 l/h

– – –

0,75 kW 0,75 kW 1,1 kW

G 3/4“ G 3/4“ G 3/4“

160 160 160

56/18 56/18 56/18

0380008 0380009 0380010

SMG 1811 SMG 1812 SMG 1813

BHGP BHGM BHGG

2000 l/h 3000 l/h 4000 l/h

– – –

1,5 kW 2,2 kW 3,0 kW

G 11/2“ G 11/2“ G 11/2“

280 280 280

75/22 75/22 75/22

0380011 0380012 0380013

SMG 1821 SMG 1822 SMG 1823 SMG 1824 SMG 1825 SMG 1826 SMG 1827

BP BM BG BF BGP BGM BGG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h

20 l/h 40 l/h 60 l/h 90 l/h 160 l/h 260 l/h 360 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“

100 100 100 100 100 100 100

25/12 25/12 25/12 25/12 38/12 38/12 38/12

0380014 0380015 0380016 0380017 0380018 0380019 0380020

SMG 1828 SMG 1829 SMG 1830

BHP BHM BHG

670 l/h 1000 l/h 1330 l/h

470 l/h 800 l/h 1100 l/h

1,5 kW 2,2 kW 3,0 kW

G 3/4“ G 3/4“ G 3/4“

160 160 160

56/18 56/18 56/18

0380021 0380022 0380023

SMG 1831 SMG 1832 SMG 1833

BHGP BHGM BHGG

2000 l/h 3000 l/h 4000 l/h

1400 l/h 2400 l/h 3200 l/h

4,0 kW 5,5 kW 7,5 kW

G 1 1/2“ G 1 1/2“ G 1 1/2“

280 280 280

75/22 75/22 75/22

0380024 0380025 0380026

p max 9 bar

p max 30 bar

1) Cyl. Withworth Pipe Threading: G…A DIN ISO 228 * To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

42

TECHNIK

Motor pump program

www.hptechnik.com

3.5

Motor output

a

a1

b

c

e1

f3

g

Dimensions g1

g2

h

k

k1

p

s

Pg

SMG 1801 SMG 1802 SMG 1803 SMG 1804 SMG 1805 SMG 1806 SMG 1807 SMG 1808 SMG 1809 SMG 1810 SMG 1811 SMG 1812 SMG 1813

BP BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM BHGG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

90 90 90 90 90 90 100 100 100 125 140 140 140

36 36 36 36 43 43 43 49 49 49 65 65 65

112 112 112 112 112 112 125 125 140 140 160 190 216

7 7 7 7 7 7 8 8 13 13 14 15 17

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 11/2“ G 11/2“ G 11/2“

38 38 38 38 44 44 44 67 67 67 100 100 100

139 139 139 139 139 139 157 157 181 181 202 227 267

43 43 43 43 43 43 43 65 65 65 90 90 90

– – – – – – – – 137 137 150 163 189

71 71 71 71 71 71 80 80 90 90 100 112 132

376 376 376 376 390 390 423 496 531 556 657 679 740

69 69 69 69 69 69 77 77 92 95 103 118 140

180 180 180 180 180 180 197 197 214 214 235 269 308

7 7 7 7 7 7 9,5 9,5 11 11 13 13 13

11 11 11 11 11 11 11 11 13,5 13,5 16 16 21

SMG 1821 SMG 1822 SMG 1823 SMG 1824 SMG 1825 SMG 1826 SMG 1827 SMG 1828 SMG 1829 SMG 1830 SMG 1831 SMG 1832 SMG 1833

BP BM BG BF BGP BGM BGG BHP BHM BHG BHGP BHGM BHGG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

90 90 90 90 100 100 125 140 140 140 178 178 210

36 36 36 36 43 43 43 49 49 49 65 65 65

112 112 112 112 125 140 140 160 190 216 216 216 254

7 7 7 7 8 13 13 14 15 17 17 17 20

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 11/2“ G 11/2“ G 11/2“

38 38 38 38 44 44 44 67 67 67 100 100 100

139 139 139 139 157 181 181 202 227 267 267 267 324

43 43 43 43 43 43 43 65 65 65 90 90 90

– – – – – 137 137 150 163 189 189 189 209

71 71 71 71 80 90 90 100 112 132 132 132 160

376 376 376 376 423 458 483 595 617 678 778 778 877

69 69 69 69 77 92 95 103 118 140 140 140 157

180 180 180 180 197 214 214 235 269 308 308 308 366

7 7 7 7 9,5 11 11 13 13 13 13 13 16

11 11 11 11 11 13,5 13,5 16 16 21 21 21 21

Accessories and spare sparts

Discharge

Oil burner nozzles

Pump type

Special aggregates, terms of sale

Series size

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Series B; without overflow valve

Industrial pumps, overflow valves

hp

43

hp

TECHNIK

Motor pump program

www.hptechnik.com

hp-Motor pump group; SMG series

3.6

Series VB with integrated overflow valve

re ressu S=p uction A=s

-1

Single system with 950 min and hp industrial pumps. Suitable for use with hydraulic oils, lubricating oils, all fuel oils, coal and lignite tar oils, kerosene and many other self-lubricating fluids. The motor output data applies for fluids with a viscosity of up to 400 cSt. From 400 to 1000 cSt, the motor must be one power stage stronger. Available at a surcharge upon request. The pump connections are indicated as follows: A = suction connection S = delivery connection The standard model of the pumps is designed with a counterclockwise direction of rotation (viewed from the pump shaft). The position of the pump connections is independent of the direction of rotation. (See illustration.) Direction of rotation l = counterclockwise, standard model For clockwise rotation, D, the oil connections A = suction and S = delivery are interchanged

Series size

Pump type

Discharge at 950 min -1 at 0 - 9 bar at 30 bar

SMG 1841 SMG 1842 SMG 1843 SMG 1844 SMG 1845 SMG 1846 SMG 1847 SMG 1848 SMG 1849 SMG 1850 SMG 1851 SMG 1852 SMG 1853

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

SMG 1861 SMG 1862 SMG 1863 SMG 1864 SMG 1865 SMG 1866 SMG 1867 SMG 1868 SMG 1869 SMG 1870 SMG 1871 SMG 1872 SMG 1873

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

Motor output

Connections*

H1 Heater Watt

Gear rotor/shaft

Article-no.

– – – – – – – – – – – – –

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0380027 0380028 0380029 0380030 0380031 0380032 0380033 0380034 0380035 0380036 0380037 0380038 0380039

p max 9 bar

20 l/h 40 l/h 60 l/h 90 l/h 160 l/h 260 l/h 360 l/h 470 l/h 800 l/h 1100 l/h 1400 l/h 2400 l/h 3200 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0380040 0380041 0380042 0380043 0380044 0380045 0380046 0380047 0380048 0380049 0380050 0380051 0380052

p max 30 bar

Accessory „WA“ = oil pan and anti-vibration pads for mounting on the wall „LH“ = oil leakage warning device has passed WHG and TÜV inspections. Also suitable for later installation on already installed aggregates to meet new regulations. Gear rotor/shaft

L

25/12 + 38/12 56/18 75/22

600 840 1050

Fuel oil warning decide Type HMS at 230 V Fuel oil warning decide Type HMW

Pan dimensions mm B H 270 270 360

80 80 80

Article-no. 0820502 0820504 0850065 0720701 0720705

H B

L

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

44

TECHNIK

Motor pump program

www.hptechnik.com

3.6

Motor output

a

a1

b

c

e1

f3

g

Dimensions g1

g2

h

k

k1

p

s

Pg

SMG 1841 SMG 1842 SMG 1843 SMG 1844 SMG 1845 SMG 1846 SMG 1847 SMG 1848 SMG 1849 SMG 1850 SMG 1851 SMG 1852 SMG 1853

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

90 90 90 90 90 90 100 100 100 125 140 140 140

36 36 36 36 36 43 43 49 49 49 65 65 65

112 112 112 112 112 112 125 125 140 140 160 190 216

7 7 7 7 7 7 8 8 13 13 14 15 17

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

38 38 38 38 44 44 44 67 67 67 80 80 80

139 139 139 139 139 139 157 157 181 181 202 227 267

67 67 67 67 75 75 75 90 90 90 120 120 120

– – – – – – – – 137 137 150 163 189

71 71 71 71 71 71 80 80 80 90 100 112 132

376 376 376 376 390 390 423 496 531 556 657 679 740

69 69 69 69 69 69 77 77 92 95 103 118 140

180 180 180 180 180 180 197 197 214 214 235 269 308

7 7 7 7 7 7 9,5 9,5 11 11 13 13 13

11 11 11 11 11 11 11 11 13,5 13,5 16 16 21

SMG 1861 SMG 1862 SMG 1863 SMG 1864 SMG 1865 SMG 1866 SMG 1867 SMG 1868 SMG 1869 SMG 1870 SMG 1871 SMG 1872 SMG 1873

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

90 90 90 90 100 100 125 140 140 140 178 178 210

36 36 36 36 43 43 43 49 49 49 65 65 65

112 112 112 112 125 140 140 160 190 216 216 216 254

7 7 7 7 8 13 13 14 15 17 17 17 20

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

38 38 38 38 44 44 44 67 67 67 80 80 80

139 139 139 139 157 181 181 202 227 267 267 267 324

67 67 67 67 75 75 75 90 90 90 120 120 120

– – – – – 137 137 150 163 189 189 189 209

71 71 71 71 80 90 90 100 112 132 132 132 160

376 376 376 376 423 458 483 595 617 678 778 778 877

69 69 69 69 77 92 95 103 118 140 140 140 157

180 180 180 180 197 214 214 235 269 308 308 308 366

7 7 7 7 9,5 11 11 13 13 13 13 13 16

11 11 11 11 11 13,5 13,5 16 16 21 21 21 21

Accessories and spare sparts

Discharge

Oil burner nozzles

Pump type

Special aggregates, terms of sale

Size series

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Series VB; with integrated overflow valve

Industrial pumps, overflow valves

hp

45

hp

TECHNIK

Motor pump program

www.hptechnik.com

hp-Motor pump group; SMG series

3.7

Series VBR with integrated overflow valve and bypass

S = pressure

Single system with 950 min -1 and hp industrial pumps.

R = Bypass

Suitable for use with hydraulic oils, lubricating oils, all fuel oils, coal and lignite tar oils, kerosene and many other self-lubricating fluids. The motor output data applies for fluids with a viscosity of up to 400 cSt. From 400 to 1000 cSt, the motor must be one power stage stronger. Available at a surcharge upon request. The pump connections are indicated as follows: A = suction connection S = delivery connection

R = bypass connection

A = suction

The standard models of the pumps are designed with a counterclockwise direction of rotation (viewed from the pump shaft). The position of the pump connections is independent of the direction of rotation. (See illustration.) Direction of rotation l = counterclockwise, standard model For clockwise rotation, D, the oil connections S = delivery and R = bypass are interchanged. The suction connection A = suction is found on the other side. Series size

Pump type

Discharge at 950 min -1 bei 0 - 9 bar bei 30 bar

Motor output

Connections*

H1 Heater Watt

Gear rotor/shaft

Article-no.

SMG 1881 SMG 1882 SMG 1883 SMG 1884 SMG 1885 SMG 1886 SMG 1887 SMG 1888 SMG 1889 SMG 1890 SMG 1891 SMG 1892 SMG 1893

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

– – – – – – – – – – – – –

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ 1) G 1“ 1) G 1“ 1)

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0380061 0380062 0380063 0380064 0380065 0380066 0380067 0380068 0380069 0380070 0380071 0380072 0380073

SMG 1881-25 SMG 1882-25 SMG 1883-25 SMG 1884-25 SMG 1885-25 SMG 1886-25 SMG 1887-25 SMG 1888-25 SMG 1889-25 SMG 1890-25 SMG 1891-25 SMG 1892-25 SMG 1893-25

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

20 l/h 40 l/h 60 l/h 90 l/h 160 l/h 260 l/h 360 l/h 470 l/h 800 l/h 1100 l/h 1400 l/h 2400 l/h 3200 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

100 100 100 100 100 100 100 160 160 160 280 280 280

25/12 25/12 25/12 25/12 38/12 38/12 38/12 56/18 56/18 56/18 75/22 75/22 75/22

0380040 0380041 0380042 0380043 0380044 0380045 0380046 0380047 0380048 0380049 0380050 0380051 0380052

p max 9 bar

p max 30 bar

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

46

TECHNIK

Motor pump program

www.hptechnik.com

3.7

a

a1

b

c

e1

f3

g

Dimensions g1

g2

h

k

k1

p

s

Pg

SMG 1881 SMG 1882 SMG 1883 SMG 1884 SMG 1885 SMG 1886 SMG 1887 SMG 1888 SMG 1889 SMG 1890 SMG 1891 SMG 1892 SMG 1893

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW

90 90 90 90 90 90 100 100 100 125 140 140 140

36 36 36 36 36 43 43 49 49 49 65 65 65

112 112 112 112 112 112 125 125 140 140 160 190 216

7 7 7 7 7 7 8 8 13 13 14 15 17

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

38 38 38 38 44 44 44 67 67 67 80 80 80

139 139 139 139 139 139 157 157 181 181 202 227 267

67 67 67 67 75 75 75 90 90 90 120 120 120

– – – – – – – – 137 137 150 163 189

71 71 71 71 71 71 80 80 80 90 100 112 132

376 376 376 376 390 390 423 496 531 556 657 679 740

69 69 69 69 69 69 77 77 92 95 103 118 140

180 180 180 180 180 180 197 197 214 214 235 269 308

7 7 7 7 7 7 9,5 9,5 11 11 13 13 13

11 11 11 11 11 11 11 11 13,5 13,5 16 16 21

SMG 1881-25 SMG 1882-25 SMG 1883-25 SMG 1884-25 SMG 1885-25 SMG 1886-25 SMG 1887-25 SMG 1888-25 SMG 1889-25 SMG 1890-25 SMG 1891-25 SMG 1892-25 SMG 1893-25

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

30 l/h 55 l/h 80 l/h 105 l/h 200 l/h 300 l/h 400 l/h 670 l/h 1000 l/h 1330 l/h 2000 l/h 3000 l/h 4000 l/h

0,37 kW 0,37 kW 0,37 kW 0,37 kW 0,75 kW 0,75 kW 1,1 kW 1,5 kW 2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW

90 90 90 90 90 90 100 100 100 125 140 140 140

36 36 36 36 43 43 43 49 49 49 65 65 65

112 112 112 112 125 140 140 160 190 216 216 216 254

7 7 7 7 8 13 13 14 15 17 17 17 20

G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 1/2“ G 1/2“ G 1/2“ G 3/4“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“

38 38 38 38 44 44 44 67 67 67 80 80 80

139 139 139 139 157 181 181 202 227 267 267 267 324

67 67 67 67 75 75 75 90 90 90 120 120 120

– – – – – 137 137 150 163 189 189 189 209

71 71 71 71 80 90 90 100 112 132 132 132 160

376 376 376 376 423 458 483 595 617 678 778 778 877

69 69 69 69 77 92 95 103 118 140 140 140 157

180 180 180 180 197 214 214 235 269 308 308 308 366

7 7 7 7 9,5 11 11 13 13 13 13 13 16

11 11 11 11 11 13,5 13,5 16 16 21 21 21 21

Accessories and spare sparts

Motor output

Oil burner nozzles

Pump Distype charge

Special aggregates, terms of sale

Size series

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Series VBR; with integrated overflow valves and bypass

Industrial pumps, overflow valves

hp

47

hp

Motor pump program

www.hptechnik.com

TECHNIK

hp-Motor pump group; UMG series

3.8

for 1400 rpm Series size UMG 1101 UMG 1102 UMG 1103 UMG 1104 UMG 1105 UMG 1106 UMG 1107 UMG 1108 UMG 1109 UMG 1110 UMG 1111 UMG 1112

Pump type UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ

Series size UMG 1201 UMG 1202 UMG 1203 UMG 1204 UMG 1205 UMG 1206 UMG 1207 UMG 1208 UMG 1209 UMG 1210 UMG 1211 UMG 1212

Pump type UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ UHE-A2-PZ UHE-A3-P UHE-A4-M UHE-A5-GZ

9 bar 200 300 450 550 – – – – – – – –

Discharge at 30 bar 40 bar – – – – – – – – 155 – 260 – 425 – 500 – – 140 – 240 – 390 – 450

Motor output 0,37 kW/BG 71 0,37 kW/BG 71 0,37 kW/BG 71 0,37 kW/BG 71 0,55 kW/BG 80 0,55 kW/BG 80 0,75 kW/BG 80 0,75 kW/BG 80 0,55 kW/BG 80 0,75 kW/BG 80 1,1 kW/BG 90 S 1,1 kW/BG 90 S

9 bar 500 700 900 1300 – – – – – – – –

Discharge at 30 bar 40 bar – – – – – – – – 380 – 600 – 850 – 1150 – – 330 – 550 – 800 – 1050

Motor output 0,37 kW/BG 71 0,37 kW/BG 71 0,55 kW/BG 80 0,55 kW/BG 80 0,75 kW/BG 80 1,1 kW/BG 80 1,5 kW/BG 90 S 2,2 kW/BG 90 L 1,1 kW/BG 80 1,5 kW/BG 90 S 2,2 kW/BG 90 L 2,2 kW/BG 90 L

Art.-no. 03905001 03905005 03905010 03905015 03905002 03905006 03905011 03905016 03905003 03905007 03905012 03905017

Thread connection for (S/A/R) G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2”

a

b

c

d

e

f

g

h

i

k

l

m

98 98 98 98 98 98 98 98 98 98 98 98

112 112 112 112 125 125 125 125 125 125 140 140

7 7 7 7 8 8 8 8 8 8 10 10

71 71 71 71 80 80 80 80 80 80 90 90

85 85 85 85 85 85 85 85 85 85 85 85

82 82 82 82 94 94 94 94 94 94 125 125

90 90 90 90 100 100 100 100 100 100 100 100

38 38 38 38 38 38 38 38 38 38 38 38

410 414 418 424 442 446 450 456 442 446 508 514

139 139 139 139 157 157 157 157 157 157 174 174

182 182 182 182 200 200 200 200 200 200 218 218

7 7 7 7 9,5 9,5 9,5 9,5 9,5 9,5 10 10

a

b

c

d

e

f

g

h

i

k

l

m

98 98 98 98 98 98 98 98 98 98 98 98

112 112 112 112 125 125 140 140 125 140 140 140

7 7 7 7 8 8 10 10 8 10 10 10

71 71 71 71 80 80 90 90 80 90 90 90

85 85 85 85 85 85 85 85 85 85 85 85

82 82 82 82 94 94 125 100 94 125 100 100

90 90 90 90 100 100 100 125 100 100 125 125

38 38 38 38 38 38 38 38 38 38 38 38

410 414 418 424 442 446 508 514 442 504 508 514

139 139 139 139 157 157 174 174 157 174 174 174

182 182 182 182 200 200 218 218 200 218 218 218

7 7 7 7 9,5 9,5 10 10 9,5 10 10 10

for 2800 rpm

48

Art.-no. 03905201 03905205 03905210 03905215 03905202 03905206 03905211 03905216 03905203 03905207 03905212 03905217

Thread connection for (S/A/R) G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2” G1/2”

Motor pump program

www.hptechnik.com

TECHNIK

3.9

Aggregates for singlepipe installation

Motor pump program, motor pump groups

hp-Motor pump group with MaG-DrivE

Industrial pumps, overflow valves

hp

Connector

Outer rotor

Motor

Never again damages caused by defective mechanical seals

· A special alloy guarantees a stable magnetic field within a wide range of temperature

The non-contact transmission of rotation assures additional safety by a non-destructive mechanical isolation in case of overcharge or blockades. As soon as the motor has been switched off, the magnetic field will be synchronized so that pump can be restarted again.

· All hp-SMG motor pump groups can be refitted in our plant with a kit

The implementation of permanent magnets out of a special alloy of samarium and cobalt guarantees a stable magnetic field within a wide range of temperature as well as a long period of time.

All hp-motor pump groups of the SMG-series will be available with our hp-MaG-DrivE or can be refitted in our plant with a kit within a short period of time. The connecting dimensions of the usual SMG will not change. Beside all the named advantages the environmental protection takes the center stage in our development work. Protecting our environment from damages by our products – for instance caused by unnoticed leakage of polluting media – we will increase our efforts in the further developing of our hp-products.

Accessories and spare sparts

· A magnetic field will be synchronized, so that pump can be restarted again

Until now mechanical seals had to be replaced in regular intervals or due to a defect untimely. The lifecycle costs were one significant factor in case of buying a pump. These times are all over now! Our hp-MaG-DrivE is 100 % free of leakage. Maintenance or repairs of the usual mechanical seal will definitely be a thing of the past.

· hp-MaG-DrivE is 100 % free of leakage

Feed pumps and delivery aggregates

Canister

Oil burner nozzles

hp-MaG-DrivE

Inner rotor

Operational conditions: Special aggregates, terms of sale

Pump

Self-lubricating media with a viscosity from 5-500 mm2/s

Flow rate: 160 - 6000 l/h

Pressure max.: 40 bar

Torsional moment max.: 80 Nm

All hp-Assemblies can be refitted with the hp-MaG-DrivE 49

hp

TECHNIK

Aggregates for single-pipe installation

www.hptechnik.com

hp-Pressure-vessel aggregate (for lower capacity)

4.0

Type: Ölman® Tested in accordance with DIN/EN 12514-1. Heating oil pump: Peripheral pump is driven by a robust motor provided with an excess temperature cut-out. The upper safety pressure limit in accordance with DIN/EN 12514-1 is reached by means of a micro limit switch which is interlocked with the controller. A reset may only be carried out by a specialist, the reason for the safety switch-off has to be examined. Filter: Situated in the suction plant stub, can be removed for cleaning. Non-return valve: Situated in the pressure connection stub on the pressure vessel. Pressure vessel: Of aluminium construction. Inside is a rolling membrane made of special rubber with fabric reinforcement (operating pressure up to 7 bar) and a piston with which the pump pressure is determined. The indicator button shows contents of the vessel at any one time. The safety and operating switches with silver contacts are thoroughly fastened on the pressure vessel and provided with a plug connector.

Packing list: Drill

1 Heating oil pump 2 Pressure vessel 3 Indicator lamp / starter 4 Indicator button 5 Suction connection for 8 mm Ø pipe 6 Changeover valve (with throttle valve) pressure connection for 8 mm Ø pipe or for venting or emptying 7 Non-return valve 8 Motor with excess temperature cut-out 9 Filter stub 10 Safety pressure limiter with reset

Technical data: Pumped volume: Pressure height: Suction height: Operating pressure: Suction-/Pressure pipe: Motor: Protection: Length: Width, height: Weight:

30 l/h 16 m 4 m 2.5 bar 8 mm Pipe -Ø 220V 50 Hz, maintenance free DIN 40050 T.1 400 mm 200 mm 6.5 kg

Description Ölman (without accessory) Ölman (with oilpan and leakage detector)

50

Article-no. 045 8002 045 8004

• 2 years guarantee • low noise • variable installation • excess temperature cut-out • pressure vessel is maintenance free

Aggregates for single-pipe installation

www.hptechnik.com

TECHNIK

hp-Pressure-vessel aggregate in single pump execution

Industrial pumps, overflow valves

hp

4.1

hp-Single wall unit series DSK 4.1- K-ITZ The appliances are made and tested in accordance with DIN/EN 12514-1. Heating oil detector LH, TÜV tested with conformity certificate for water use.

Aggregates for singlepipe installation

Motor pump program, motor pump groups

with accumulator control with horizontal ITZ-P3 gear pump fitted on mounting plate with overflow valve and all necessary fittings with safety control system: A dual-function oil pressure switch switches the pump off at min. pressure.

Appliance connections pipe-Ø * Pressure Suction 12

Internal gear pump with flanged overflow valve with AC-Motor IP 54

3

Non-return valve

4

Oil distributor

5

Accumulator with membrane

6

Manometer

7

Shut-off valve for supply pipe

Flow rate l/h

Continuous discharge l/h

Motor output 2800 min -1 230V, 50 Hz

140

110

0,18

Accumulator Litres 8

Pressure switch, adjustable, with start up button, Switch settings: bottom off, middle on, top off

9

Motor circuit-breaker with contactor and signal lights assembled ready for connection

10 Oil tray B 550, H 170, T 200 11 Accessories: Heating oil indicator for electrical switch off in oil tray

Dimensions in mm With

Height

Depth

410

600

250

Article-no.

max. delivery head: 20 m1)

0450032

max. suction underpressure 4m

Accessories and spare sparts

2

8

Special aggregates, terms of sale

DSK 4.1-6044-K-ITZ-P3 12

Oil filter in pump fitted

Oil burner nozzles

Type

1

Feed pumps and delivery aggregates

Included in delivery:

Net

* To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

51

hp

TECHNIK

Aggregates for single-pipe installation

www.hptechnik.com

hp-Single pressure accumulator wall unit series DSK 4.1

4.2

hp-Single pump wall unit with pressure accumulator control with hp internal gear pump horizontally mounted on the oil pan with overflow valve and all required fittings; with safety control: a pressure transmitter switches the pump off in case of underpressure. Independently controls fuel oil supply unit with pressure membrane for single pumping oil supply according to DIN/EN 12514-1 of automatic oil burners. Supply unit – built, tested, registered and marked according to DIN 12514-1! Delivery including oil leakage detector.

Scope of delivery of the supply unit: 01 1 2 3

Oil pan Oil filter Vacuum gauge Internal gear pump with overflow valve, flanged with direct current norm motor B3/B14, IP 54 4 Non-return valve 5 Ball valve 6 Pressure gauge 7 Pressure transmitter 8 Pressure accumulator with fuel oil resistant membrane and cut-off valve 10 hp pump controller 11 Oil leakage detector in oil pan for electrical shut-off

Net

Order text: hp-Single wall unit with pressure accumulator control, Series DSK 4.1 Capacity:..........................................l/h fuel oil EL max. delivery head: ......................m Current type: .................................. Voltage: ............................................Volt, 50 Hz Accessories: ..................................... Type:..................................................(refer table)

Type DSK 4.1-1545 DSK 4.1-1547 DSK 4.1-1549

Device connection pipe-Ø* Pressure Suction 15 18 15 18 18 28

Discharge volume l/h 300 600 1500

Capacity l/h 240 400 1000

Motor output 1400 rmp DC (kW) AC (kW) 0,18 2) 0,18 0,37 2) – 0,75 2) –

Pressureaccumulator Liter 18 18 25

Dimensions mm Width 650 650 750

Height 1000 1000 1000

Article-no. Depth 320 320 420

Pipe dimensions according to phase calculation

DC 0450004 0450006 0450008

AC 0450015 – –

max. delivery head: 20 m1) max. suction underpressure -0,4 bar

For assembly and commissioning as well as maintenance, observe the operating instruction enclosed with each unit!

1) Different delivery heads upon request 2) These units have a motor output of 400 V and a rotational speed of 1400 RPM *

52

For faultless pump functionality, all pipes must be dimensioned according to fluidic basics via phase calculation according to the local conditions! Pump and device connection does not provide any information regarding the respective pipe dimension. Note regarding flanged model: EO pipe screw connection for steel pipes DIN 1630 and 2391, if Cu pipes are used, the corresponding EO supporting bushing must be used!

Aggregates for single-pipe installation

www.hptechnik.com

TECHNIK

hp-Twin pressure accumulator wall unit series DSK 4.2 & DSK 2.16

Industrial pumps, overflow valves

hp

4.3

hp-Twin pump wall unit with pressure accumulator control

Motor pump program, motor pump groups

with hp internal gear pump horizontally mounted on the oil pan with overflow valve and all required fittings; with safety control: a pressure transmitter switches the pump off in case of underpressure. Delivery including oil leakage detector.

Aggregates for singlepipe installation

Order text: hp-Twin wall unit with pressure accumulator control, Series DSK 4.2 for manual actuation, alternative: with pressure accumulator control Series DSK 2.16 for automatic switching and fault switching Capacity:..............................l/h fuel oil EL max. delivery head: ..........m Current type: ...................... Voltage: ................................Volt, 50 Hz Accessories: ......................... Type:......................................(refer table)

Scope of delivery of the supply unit:

Net

4 4a 5 6 7 8

Pressure accumulator with fuel oil resistant membrane and cut-off valve

9

Cut-off valves for supply and vent pipes

10

hp-Twin pump controller

11

Oil leakage detector in oil pan for electrical shut-off

Accessories and spare sparts

E = Draining

Oil pan Oil filter with shut-off device Vacuum gauge Internal gear pump with overflow valve and shutoff valve at the suction side, flanged with direct current norm motor, B3/B14, IP 54 Non-return valve with shutoff valve Non-return valve Oil distributor Pressure gauge Pressure sensor

Feed pumps and delivery aggregates

01 1 2 3

DSK 2.16-1545 DSK 2.16-1547 DSK 2.16-1549

Device connection pipe Ø * Pressure Suction 15 18 15 18 18 28

Discharge volume l/h 300 600 1500

Capacity l/h 240 400 1000

Motor output Pressure 1400 RMP 2800 RMP accumulator DC (kW) AC (kW) Liter 0,18 2) – 18 0,37 2) – 18 0,75 2) – 25

Dimensions mm Width 840 840 1050

Height 1000 1000 1000

Article-no. Depth 320 320 420

Pipe dimensions according to phase calculation

DC 0460008 0460012 0460016

AC 0460028 – –

max. delivery head: 20 m

Oil burner nozzles

Type

max. suction underpressure: -0,4 bar

Special aggregates, terms of sale

For assembly and commissioning as well as maintenance, observe the operating instruction enclosed with each unit!

1) Different delivery heads upon request. 2) These units have a motor output of 400 V and a rotational speed of 1400 RPM. *

For faultless pump functionality, all pipes must be dimensioned according to fluidic basics via phase calculation according to the local conditions! Pump and device connection does not provide any information regarding the respective pipe dimension.

53

hp

TECHNIK

Feed pumps and delivery aggregates

www.hptechnik.com

hp-Single-pumping unit series MOG

5.0

Single pumping unit for fuel oil in scewed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners - equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1. Order text Single pumping unit series MOG Series MOG: Discharge: Medium: Working pressure: Motor: Accessoires:

…… Refer to key …… l/h …… …… bar …… kW …… V/50 Hz …… Series key

Scheme I: MOG 50, MOG 51, MOG 53 and MOG 55 (without return)

Packing List: 1. 2. 3. 4. 5. 6. 8.

hp-motor pump with overflow valve single filter ball valve prefill opening vacuum gauge pressure gauge oil pan

Scheme II: MOG 52 and MOG 54 (with return) Accessories: 9. oil leakage detection Type HMW 10. electrical pressure switch pressure transmitter 11. nonreturn valve (only for Scheme 2, not by using Pos. 12) 12. double ball valve

Key for determination of the order numbers: for example: MOG . . . – – Series

Size

Accessories*

50 = feed pump aggregate (6 bar and 9 bar), 1) fuel oil EL + L, Kerosene 51 = feed pump aggregate (9 bar), fuel oil M, S + ES, coaltar oil 52 = delivery aggregate (30 bar), fuel oil EL + L, Kerosene

–

Discharge see chart

FL = flanged execution

53 = delivery aggregate 30 bar, fuel oil M, S, + ES 54 = delivery aggregate 40 bar, fuel oil EL + L 55 = delivery aggregate 40 bar, fuel oil M, S + ES

A = pump and filter with electrical stationary heating and connecting box (only for Scheme 1) RV = non-return valve (only for Scheme 2) DK = double ball valve (only for MOG 52 and MOG 54) E1 = with optical filter indicator (only for flanged execution “FL”) E2 = with optical and electrical filter indicator (only for flanged execution “FL”) LH = oil leakage detection Type HMW S1) = electrical pressure switch for pipe burst monitoring and dry running protection DT = pressure transmitter

* Listening classification letters after each other 1) For use as feed pump aggregate for the supply with fuel oil per DIN 4736 do not exceed the working pressure of 6 bar. Note: it is absolutely imperative that the user install an electric pressure switch (acting as a “lower limit controller”), as pipe pressure safety device, on the equipment to which the pump is to be connected. This prerequisite can be met by ordering accessory “S” and “DT”.

54

LH S DT RV DK

Feed pumps and delivery aggregates

www.hptechnik.com

TECHNIK

hp-Single-pumping unit series MOG

Industrial pumps, overflow valves

hp

5.1

Motor pump program, motor pump groups

Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1. General details: The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.

Max. suction head:

Measured in terms of the manometer (Pos. 5) = -0,6 bar

Max. inlet pressure:

Pressure load of the axial face seal: - 0,6 – + 5 bar

Max. nozzle loss:

70% of discharge at pmax.

Aggregates for singlepipe installation

Operating viscosity:

Single pumping unit MOG 50 according to scheme I without bypass Discharge at 1400 min -1 at 0 – 9 bar in l/h

at pmax in l/h

Execution according to scheme I Pump type series VB

Motor output 1) in kW

Max. pressure Screwed Article-no.

Flanged Article-no.

Pipe 12 Pipe 12 Pipe 12 Pipe 12

MOG 50 MOG 50 MOG 50 MOG 50

01 02 03 04

45 80 120 160

– – – –

VBP VBM VBG VBF

0,18 0,18 0,18 0,18

0510101 0510102 0510103 0510104

– – – –

Pipe 18/DN 15 Pipe 18/DN 15 Pipe 18/DN 15

MOG 50 MOG 50 MOG 50

05 06 07

300 450 600

– – –

VBGP VBGM VBGG

0,18 0,37 0,37

0510105 0510106 0510107

– – –

DN 25 DN 25 DN 25

MOG 50 MOG 50 MOG 50

08 09 10

1000 1500 2000

– – –

VBHP VBHM VBHG

0,75 0,75 1,1

0510108 0510109 0510110

– – –

DN 32 DN 32 DN 40

MOG 50 MOG 50 MOG 50

11 12 13

3000 4500 6000

– – –

VBHGP VBHGM VBHGG

1,5 2,2 3,0

– – –

0510211 0510212 0510213

in bar

Feed pumps and delivery aggregates

Suction/pressure screwed/flanged

Aggregate type Refer to key Discharge of made of rating operation

designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar

Accessories and spare sparts

Connections*

MOG 51 MOG 51 MOG 51 MOG 51

01 02 03 04

45 80 120 160

– – – –

VBP VBM VBG VBF

0,18 0,18 0,18 0,18

0510114 0510115 0510116 0510117

– – – –

Pipe 18/DN 15 Pipe 18/DN 15 Pipe 18/DN 15

MOG 51 MOG 51 MOG 51

05 06 07

300 450 600

– – –

VBGP VBGM VBGG

0,18 0,37 0,37

0510118 0510119 0510120

0510218 0510219 051220

DN 25 DN 25 DN 25

MOG 51 MOG 51 MOG 51

08 09 10

1000 1500 2000

– – –

VBHP VBHM VBHG

0,75 0,75 1,1

– – –

0510221 0510222 0510223

DN 32 DN 32 DN 40

MOG 51 MOG 51 MOG 51

11 12 13

3000 4500 6000

– – –

VBHGP VBHGM VBHGG

1,5 2,2 3,0

– – –

0510224 0510225 0510226

designed for max. pressure of 9 bar

Special aggregates, terms of sale

Pipe 18 Pipe 18 Pipe 18 Pipe 18

Oil burner nozzles

Single pumping unit MOG 51 according to scheme I without bypass

Dimensions refer page 58/59.

*

To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

55

hp

Feed pumps and delivery aggregates

www.hptechnik.com

TECHNIK

hp-Single-pumping unit series MOG

5.2

Single pumping unit for fuel oil in scewed or flanged compact execution, as a feed- or delivery aggregate for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1. General details: Operating viscosity:

The motor output data applies for fluids with a viscosity up to 150 cSt.

Max. suction head:

Measured in termes of the manometer (Pos. 5) = -0,6 bar

Max. inlet pressure: Max. nozzle loss:

Pressure load of the axial face seal: -0,6 to max. 5 bar (refer picture page 18) 70% of discharge at pmax

Single pumping unit MOG 53 according to scheme I without bypass Connections** Screwed/flanged

Fuel oil-aggregate-type refer to key Discharge of made of rating operation

Article-no. Discharge at 1400 min -1 at 0 – 9 bar

at pmax

Pump type

Motor output 1) kW

According scheme I Screwed Flanged „FL“

Pipe 18/DN 15 Pipe 18/DN 15 Pipe 18/DN 15

MOG 53 MOG 53 MOG 53

05 06 07

300 450 600

240 390 540

VBGP VBGM VBGG

0,75 1,1 1,5

0510130 0510131 0510132

– – –

DN 25 DN 25 DN 25

MOG 53 MOG 53 MOG 53

08 09 10

1000 1500 2000

700 1200 1700

VBHP VBHM VBHG

2,2 3,0 4,0

0510133 0510134 0510135

– – –

DN 32 DN 32 DN 40

MOG 53 MOG 53 MOG 53

11 12 13

3000 4500 6000

2200 3600 4800

VBHGP VBHGM VBHGG

5,5 7,5 7,5

– – –

0510236 0510237 0510238

Pipe 18/DN 15 Pipe 18/DN 15 Pipe 18/DN 15

MOG 55 MOG 55 MOG 55

05 06 07

300 450 600

200 360 480

VBGP VBGM VBGG

0,75 1,5 2,2

0510140 0510141 0510142

0510240 0510241 0510242

DN 25 DN 25 DN 25

MOG 55 MOG 55 MOG 55

08 09 10

1000 1500 2000

600 1000 1400

VBHP VBHM VBHG

3,0 4,0 5,5

0510143 0510144 0510145

0510243 0510244 0510245

DN 32 DN 32

MOG 55 MOG 55

11 12

3000 4500

2000 3200

VBHGP VBHGM

7,5 7,5

– –

0510246 0510247

Stationary heating accessory „A“

Max. pressure bar

refer price list

designed for max. pressure of 30 bar

refer price list

designed for max. pressure of 40 bar

Dimensions refer page 58/59.

Article-no. for accessoires A = Pump and filter with electrical stationary heating and connecting box E1 = with optical filter indicator E2 = with optical and electrical filter indicator LH = Oil leakage detection, (without running protection) S = with electrical pressure switch for pipe burst monitoring (without running protection) DT = Pressure transmitter

*

0820221 0820222 0720705 Type FF4 0820290 Type DSA 0820292 Type 0720695

To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

Note for the screwed version: When using a Cu pipe it is imperative that the appropriate EO supporting sleeve be used for EO threaded pipe attachments for DIN 1630 and 2391 steel pipes.

56

Feed pumps and delivery aggregates

www.hptechnik.com

TECHNIK

hp-Single-pumping unit series MOG

Industrial pumps, overflow valves

hp

5.3

General details: The motor output data applies for fluids with a viscosity up to 150 cSt.

Max. suction head:

Measured in termes of the manometer

Max. inlet pressure:

Pressure load of the axial face seal: -0,6 to max. 5 bar (refer picture page 18)

Max. nozzle loss:

70% of discharge at pmax

Motor pump program, motor pump groups

Operating viscosity:

Single pumping unit MOG 52/54 according to scheme II, with bypass

at 0 - 9 bar

at p max

Pump type VBR at p max

Motor output 1 1) kW

Screwed Article-no.

Flanged Article-no.

with double ball valve according scheme II

Max. pressure

flanged „FL“

bar

designed for max. pressure of 30 bar

Pipe 12/DN 15 Pipe 12/DN 15 Pipe 12/DN 15 Pipe 12/DN 15 Pipe 18/DN 15 Pipe 18/DN 15 Pipe 18/DN 15 DN 25 DN 25 DN 25 DN 32 DN 32 DN 40

MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52 MOG 52

01 02 03 04 05 06 07 08 09 10 11 12 13

45 80 120 160 300 450 600 1000 1500 2000 3000 4500 6000

30 60 100 140 240 390 540 700 1200 1700 2200 3600 4800

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

0,18 0,18 0,18 0,37 0,75 0,75 1,1 1,5 2,2 3,0 4,0 5,5 7,5

0510148 0510149 0510150 0510151 0510152 0510153 0510154 0510155 0510156 0510157 – – –

– – – – 0510252 0510253 0510254 0510255 0510256 0510257 0510258 0510259 0510260

– – – – 0820110 0820110 0820110 0820111 0820112 2820112 0820113 0820113 0820114

Pipe 18/DN 15 Pipe 18/DN 15 Pipe 18/DN 15 DN 25 DN 25 DN 25 DN 32 DN 32

MOG 54 MOG 54 MOG 54 MOG 54 MOG 54 MOG 54 MOG 54 MOG 54

05 06 07 08 09 10 11 12

300 450 600 1000 1500 2000 3000 4500

200 360 480 600 1000 1400 2200 3200

VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM

0,75 1,1 1,5 2,2 3,0 4,0 5,5 7,5

0510165 0510166 0510167 0510168 0510169 0510170 – –

0510265 0510266 0510267 0510268 0510269 0510270 0510271 0510272

0820110 0820110 0820110 0820111 0820112 0820112 0820113 0820113

Aggregates for singlepipe installation

Execution according to scheme I Discharge at 1400 min -1

Feed pumps and delivery aggregates

Screwed/flanged

Fuel oil-aggregate-type refer to key Discharge of made of rating operation

designed for max. pressure of 40 bar

Accessories and spare sparts

Connections*

Special aggregates, terms of sale

Oil burner nozzles

Dimensions refer page 58/59.

57

hp

Feed pumps and delivery aggregates

www.hptechnik.com

TECHNIK

hp-Single-pumping unit series MOG

5.3.1

Dimensional drawing MOG according scheme I

1

2

3

6 4

Packaging list:

10

1

T

1

Overflow valve

2

Filter

3

Vakuum manometer

4

Manometer

5

hp-Motor pump group with hp-internal gear pump with internal grated overflow valve, connector and motor B3/B14, B3/B5

P

9

5

6

Pressure gauge

8

Oil pan

Accessories:

8

Oil leakage detection

LH

10 Electrical pressure switch or pressure transmitter

9

S DT

P T

Series

MOG 50 51 53 55

Dimensions

L MOG 50

L MOG 51, 53, 55

B

B1 ±10

mm

mm

mm

mm

mm

mm

H max. = required installation highest mm

01 02 03 04

700 700 700 700

1000 1000 1000 1000

270 270 270 270

115 115 115 115

115 115 115 115

600 600 600 600

320 320 320 320

320 320 320 320

05 06 07

840 840 840

1000 1000 1000

270 270 270

115 115 115

115 115 115

650 650 650

400 400 400

400 400 400

08 09 10

1050 1050 1050

1200 1200 1200

360 360 360

147 147 147

147 147 147

850 850 850

460 460 460

460 460 460

11 12 13

1400 1400 1400

1400 1400 1400

500 500 500

200 200 200

200 200 200

1000 1000 1000

600 600 600

600 600 600

Please note the enclosed operation, installation and maintenance instruction!

58

B2 ±10

H1 ±10

H2 ±10

mm

mm

hp-Single-pumping unit series MOG

5.3.2

Dimensional drawing MOG according scheme II

9 1 2

11

5

8

Filter

3

Vakuum manometer

4

Manometer

5

hp-Motor pump group with hp-internal gear pump with internal grated overflow valve, connector and motor B3/B14, B3/B5

6

Pressure gauge

8

Oil pan

Accessories: 9

Oil leakage detection

LH

10 Electrical pressure switch or pressure transmitter

S DT

R

11 Non return valve (not when using accessory 12)

RV

T

12 Double ball valve (only MOG 52 and 54)

DK

9

11 P

Series

MOG

52

54

Motor pump program, motor pump groups

P

T

2

Aggregates for singlepipe installation

1

Overflow valve

Dimensions

L

L1

B

B1 ±10

B2 ±10

B3 ±10

mm

mm

mm

mm

mm

mm

mm

H max. = required installation highest mm

01 02 03 04

700 700 700 700

150 150 150 150

270 270 270 270

50 50 50 50

60 60 60 60

120 120 120 120

600 600 600 600

05 06 07

1050 1050 1050

350 350 350

360 360 360

80 80 80

100 100 100

140 140 140

08 09 10

1400 1400 1400

350 350 350

360 360 360

100 100 100

97 97 97

11 12 13

1600 1600 1600

500 500 500

500 500 500

150 150 150

150 150 150

H1 ±10

H2 ±10

mm

mm

180 180 180 180

350 350 350 350

650 650 650

250 250 250

430 430 430

100 100 100

850 850 850

460 460 460

460 460 460

100 100 100

1000 1000 1000

500 500 500

600 600 600

Feed pumps and delivery aggregates

4 10

1

Accessories and spare sparts

6

Packaging list:

Oil burner nozzles

3

Industrial pumps, overflow valves

Feed pumps and delivery aggregates

www.hptechnik.com

TECHNIK

Special aggregates, terms of sale

hp

Please note the enclosed operation, installation and maintenance instruction!

59

hp

TECHNIK

Feed pumps and delivery aggregates

www.hptechnik.com

hp-Twin-pumping unit series BIK

5.4.1

Twin pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregate for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1. Order text: Single pumping unit series BIK Series BIK: . . . . . . . . . refer series key . . . . . Discharge: . . . . . . . . . l/h . . . bar Medium: . . . . . . . . . . . . . . . . . . . . Working pressure: . . bar Motor: . . . . . . . . . . . . kW . . . . . . V, 50 Hz Accessoires: . . . . . . . . refer series key

Scheme I

Packing list: 1

hp-Motor pump group with hp-internal gear pump with integrated overflow valve, connector and motor B3/B14, B3/B5

2

Single filter

P = Pressure

T = Suction

2a Selectable double filter 3

Scheme II

Ball valve

4

Prefill opening

5

Vacuum gauge

6

Pressure gauge

7

Non-return valve

9

Oil pan

Accessoires: P = Pressure

T = Suction

11 Oil leakage detection type HMW

LH

12 Electrical pressure switch pressure transmitter

S DT

13 Optical (and electrical) filter indicator E1, E2

Series key for finding the ordering details BIK . . . . .

–

Series 5000 = Feed pump aggregrate 9 bar and 6 bar, 1) Fuel oil EL + L, Kerosene 51 = Feed pump aggregrate 9 bar, fuel oil M, S + ES, coaltar oil 52 = Delivery aggregate 30 bar, Fuel oil EL + L + Kerosene 54 = Delivery aggregate 40 bar, fuel oil EL + L 55 = Delivery aggregate 40 bar, fuel oil M, S + ES

–

–

Size

Discharge see chart

– Accessoires*

FL = flanged execution

A = Pump and filter with electrical stationary heating and connecting box EF = With 2 single filters DF = With switch-selectable double filter E1 = With optical filter indicator E2 = With optical and electrical filter indicator (E1 und E2) LH = Oil leakage detection Type HMW S 1) = Electrical pressure switch for pipe burst monitoring and dry running protection DT = Pressure transmitter

* Listening classification letters after each other 1) For use as feed pump aggregat for the supply with fuel oil per DIN /EN 12514 do not exceed the working pressure of 6 bar. Note: it is absolutely imperative that the user install an electric pressure switch (acting as a “lower limit controller”), as pipe pressure safety device, on the equipment to which the pump is to be connected. This prerequisite can be met by ordering accessory “S” and “DT”.

60

TECHNIK

Feed pumps and delivery aggregates

www.hptechnik.com

hp-Twin-pumping unit series BIK

Industrial pumps, overflow valves

hp

5.5

General details:

Motor pump program, motor pump groups

max. suction. head:

The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt. to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request. measured in terms of the manometer Pos. 3 = -0,6 bar

max. inlet pressure:

= pressure load of the axial face seal: -0,6 till max. +5 bar (see picture page 18)

max. nozzle loss:

= 70% of discharge at pmax

Aggregates for singlepipe installation

Operating viscosity:

Twin pumping unit according to scheme I and II without bypass for heating oil EL + L Discharge at 1400 min -1 at 0 – 9 in l/h

Pump Type series VB

Motoroutput

Dimension Length x breath x height

in kW

Article-no.

Execution with double filter according to scheme II Max. pressure Article-no. in bar

BIK 5000-1 BIK 5000-2 BIK 5000-3 BIK 5000-4

45 80 120 160

VBP VBM VBG VBF

0,18 0,18 0,18 0,18

0520046 0520047 0520048 0520049

600 x 500 x 550 600 x 500 x 550 600 x 500 x 550 600 x 500 x 550

– – – –

DN 15/DN 15 DN 15/DN 15 DN 15/DN 15

BIK 5000-5 BIK 5000-6 BIK 5000-7

300 450 600

VBGP VBGM VBGG

0,18 0,37 0,37

0520050 0520056 0520057

600 x 500 x 550 600 x 500 x 550 600 x 500 x 550

0520090 0520091 0520092

DN 25/DN 25 DN 25/DN 25 DN 25/DN 25

BIK 5000-8 BIK 5000-9 BIK 5000-10

1000 1500 2000

VBHP VBHM VBHG

0,75 0,75 1,1

0520058 0520059 0520060

800 x 700 x 700 800 x 700 x 700 800 x 700 x 700

0520093 0520094 0520095

DN 32/DN 32 DN 32/DN 32 DN 40/DN 40

BIK 5000-11 BIK 5000-12 BIK 5000-13

3000 4500 6000

VBHGP VBHGM VBHGG

1,5 2,2 3,0

0520061 0520062 0520063

800 x 700 x 800 800 x 700 x 800 800 x 700 x 800

0520096 0520097 0520098

designed for max. pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar

Special aggregates, terms of sale

Oil burner nozzles

Pipe D 12/without flange Pipe D 12/without flange Pipe D 12/without flange Pipe D 12/without flange

Feed pumps and delivery aggregates

Aggregate-type

Accessories and spare sparts

Connections suction/pressure screwed/flanged

*

To insure proper unit function, all pipe attachments must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device attachments is not indicative of the pipe attachment size which must be used.

Note for the screwed version: When using a Cu pipe it is imperative that the appropriate EO supporting sleeve be used for EO threaded pipe attachments for DIN 1630 and 2391 steel pipes.

61

hp

TECHNIK

Feed pumps and delivery aggregates

www.hptechnik.com

hp-Twin-pumping unit series BIK

5.6

Twin pumping unit for fuel oil in screwed or flanged compact execution, as feed-or delivery aggregates for oil supply of automatic oil burners – equivalent 411 and TRD 604 (BOB) and DIN 4755 BL.2 from automatical oil burner. Scheme I

Pressure PP == Druck

TT == Suction Saug

Packing list:

Accessoires:

1

Ball valve

9

2

Single filter

10 Electrical pressure switch pressure transmitter

2a Selectable double filter 3

Vacuum-manometer

4

Manometer

5

hp-Motor pump group with hp-internal gear pump with integrated overflow valve, connector and motor B3/B14, B3/B5

7

Non-return valve

8

Oil pan

Optional Scheme II double filter with accessory E1 - E2

PP == Pressure Druck

T= T Suction = Saug

Oil leakage

LH S DT

Twin pumping unit according to scheme I and II without bypass BIK 51 Connections* screwed/flanged

Fuel oil aggregate-type

T = Suction/PN 16 P = Pressure/PN 40 (mm)

Refer to key of mode of operation

Pipe 18 Pipe 18 Pipe 18 Pipe 18 Pipe 18/DN 20 Pipe 18/DN 20 DN 20/DN 20 DN 25 DN 25 DN 32 DN 32 DN 40 DN 50

BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51 BIK 51

Pump type VB

Discharge Discharge at 1400 min -1 rating Lieferumfang für andSchema II ohne Filter at 0 - 9 at p max 01 02 03 04 05 06 07 08 09 10 11 12 13

45 80 120 160 300 450 600 1000 1500 2000 3000 4500 6000

– – – – – – – – – – – – –

VBP VBM VBG VBF VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM VBHGG

Motoroutput 1) kW 0,18 0,18 0,18 0,18 0,18 0,37 0,37 0,75 0,75 1,1 1,5 2,2 3,0

Screwed Flanged Execution execution after Stationary scheme III after scheme after scheme IV heating with single III with with reversible accessory „A“ filter single filter double filter only after Article-no. Article-no. Article-no. scheme I 0520111 0520112 0520113 0520114 0520115 0520116 0520117 0520118 – – – – –

– – – – 0520330 0520331 0520332 0520333 0520334 0520335 0520336 0520337 0520338

– – – – 0520340 0520341 0520342 0520343 0520344 0520345 0520346 0520347 0520348

0520370 0520371 0520372 0520373 0520374 0520375 0520376 0520377

– – – 0520380 0520381 0520382 0520383 0520384

Max. pressure bar

refer price list

designed for max. working pressure of 9 bar

refer price list

designed for max. working pressure of 40 bar

Twin pumping unit according to scheme I and II without bypass BIK 55 Pipe 18/DN 20 Pipe 18/DN 20 DN 25 DN 25 DN 25 DN 32 DN 32 DN 40

BIK 55 BIK 55 BIK 55 BIK 55 BIK 55 BIK 55 BIK 55 BIK 55

05 06 07 08 09 10 11 12

300 450 600 1000 1500 2000 3000 4500

200 360 480 600 1000 1400 2000 3200

VBGP VBGM VBGG VBHP VBHM VBHG VBHGP VBHGM

0,75 1,5 2,2 3,0 4,0 5,5 7,5 7,5

0520133 0520134 0520135 0520136 – – – –

Dimensions refer page 60/61.

*

To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

Note for the screwed version: When using a Cu pipe it is imperative that the appropriate EO supporting sleeve be used for EO threaded pipe attachments for DIN 1630 and 2391 steel pipes.

62

Feed pumps and delivery aggregates

www.hptechnik.com

TECHNIK

hp-Twin-pumping unit series BIK

Industrial pumps, overflow valves

hp

5.7

Twin pumping unit for fuel oil in screwed or flanged compact execution, as feed-or delivery aggregates for oil supply of automatic oil burners – equivalent 411 and TRD 604 (BOB) and DIN 4755 BL.2 from automatical oil burner. Packaging list: Ball valve

2

Single filter

2a Selectable double filter 3

Optional double filter with accessory E1 - E2

R = Bypass TT==Suction Saug

P = Pressure

Vacuum manometer

4

Manometer

5

hp-Motor pump group with hp-internal gear pump with integrated overflow valve, connector and motor B3/B14, B3/B5

7

Non-return valve

8

Oil pan

Aggregates for singlepipe installation

PP==Pressure Druck

Accessoires: 9

Leakage oil

LH

10 Electrical pressure switch, pressure transmitter

S DT

11 with bypassfor BIK 52, BIK 54

R

Feed pumps and delivery aggregates

Suction T T= =Saug

Scheme IV

1

Motor pump program, motor pump groups

Scheme III

Twin pumping unit BIK 52 according to scheme III and IV with bypass Pump type series VBR

Screwed Flanged execution execution after scheme III after scheme after scheme IV with single III with with reversible single filter filter single filter double filter in kW Article-no. Article-no. Article-no. Motoroutput 1)

T = Suction/PN 16 P = Pressure/PN 40 (mm)

R = Return PN 16 (mm)

Refer to key of mode ofoperation

Discharge rating

Pipe 12 Pipe 12 Pipe 12 Rohr 12 Pipe 18/DN 20 Pipe 18/DN 20 Pipe 18/DN 20 DN 25 DN 25 DN 25 DN 32 DN 32 DN 40

Pipe 12 Pipe 12 Pipe 12 Pipe 12 Pipe 18/DN 15 Pipe 18/DN 15 Pipe 18/DN 15 DN 20 DN 20 DN 20 DN 25 DN 25 DN 32

BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52 BIK 52

01 02 03 04 05 06 07 08 09 10 11 12 13

45 80 120 160 300 450 600 1000 1500 2000 3000 4500 6000

30 60 100 140 240 390 540 700 1200 1700 2200 3600 4800

VBRP VBRM VBRG VBRF VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM VBHGRG

0,18 0,18 0,18 0,37 0,75 0,75 1,1 1,5 2,2 3,0 4,0 5,5 7,5

0520141 0520142 0520143 0520144 0520145 0520146 0520147 – – – – – –

– – – – 0520390 0520391 0520392 0520393 0520394 0520395 0520396 0520397 0520398

– – – – 0520400 0520401 0520402 0520403 0520404 0520405 0520406 0520407 0520408

Pipe 18/DN 20 Pipe 18/DN 20 Pipe 18/DN 20 DN 25 DN 25 DN 25 DN 32 DN 32

Pipe 18/DN 20 Pipe 18/DN 20 Pipe 18/DN 20 DN 20 DN 20 DN 20 DN 25 DN 25

BIK 54 BIK 54 BIK 54 BIK 54 BIK 54 BIK 54 BIK 54 BIK 54

05 06 07 08 09 10 11 12

300 450 600 1000 1500 2000 3000 4500

200 360 480 600 1000 1400 2000 3200

VBGRP VBGRM VBGRG VBHRP VBHRM VBHRG VBHGRP VBHGRM

0,75 1,1 1,5 2,2 3,0 4,0 5,5 7,5

0520154 0520155 0520156 – – – – –

0520410 0520411 0520412 0520413 0520414 0520415 0520416 0520417

0520420 0520421 0520422 0520423 0520424 0520425 0520426 0520427

at 0 - 9 bar in l/h

at p max in l/h

Max. pressure Accessories and spare sparts

Discharge at 1400 min -1

in bar

designed for max. working pressure of 30 bar

Oil burner nozzles

Fuel oil aggregate-type

designed for max. working pressure of 40 bar

Special aggregates, terms of sale

Connections* screwed/flanged

Dimensions refer page 60/61. *

To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

Note for the screwed version: When using a Cu pipe it is imperative that the appropriate EO supporting sleeve be used for EO threaded pipe attachments for DIN 1630 and 2391 steel pipes.

63

hp

TECHNIK

Feed pumps and delivery aggregates

www.hptechnik.com

hp-Twin-pumping unit series BIK

5.7.1

Dimensional drawing MOG according scheme I and II Scheme I

Scheme II

Packing list:

Accessoires:

1

Ball valve

9

2

Single filter

10 Electrical pressure switch, pressure transmitter

2a Selectable double filter 3

Vacuum manometer

4

Manometer

5

hp-Motor pump group with hp-internal gear pump with integrated overflow valve, connector and motor B3/B14, B3/B5

7

Non-return valve

8

Oil pan

Oil leakage

LH S DT

Dimension in mm Series

BIK

51

55

Size 01 02 03 04 05 06 07 08 09 10 11 12 13

L BIK 50

L BIK 51, 53, 55

B

B1 ±10

B2 ±10

B3 ±10

Hmax = required installation highest

1000 1000 1000 1000 1000 1000 1000 1400 1400 1400 1800 1800 1800

1000 1000 1000 1000 1000 1000 1000 1400 1400 1400 1800 1800 1800

500 500 500 500 500 500 500 650 650 650 800 800 800

250 250 250 250 250 250 250 325 325 325 400 400 400

250 250 250 250 250 250 250 325 325 325 400 400 400

– – – – – – – – – – – – –

600 600 600 600 650 650 650 850 850 850 1100 1100 1100

Please note the enclosed operation, installation and maintenance instruction!

64

H1 ±10

H2 ±10

H3 ±10

320 320 320 320 400 400 400 460 460 460 600 600 600

320 320 320 320 400 400 400 460 460 460 600 600 600

– – – – – – – – – – – – –

TECHNIK

Feed pumps and delivery aggregates

www.hptechnik.com

hp-Twin-pumping unit series BIK

Industrial pumps, overflow valves

hp

5.7.2

Dimensional drawing MOG according scheme III and IV Scheme IV

Packing list:

Accessoires:

1

Ball valve

9

2

Single filter

10 Electrical pressure switch, pressure transmitter

2a Selectable double filter

Oil leakage

LH

Vacuum manometer

4

Manometer

5

hp-Motor pump group with hp-internal gear pump with integrated overflow valve, connector and motor B3/B14, B3/B5

7

Non-return valve

8

Oil pan

S DT R Accessories and spare sparts

11 with bypass for BIK 52, BIK 54

3

Feed pumps and delivery aggregates

Aggregates for singlepipe installation

Motor pump program, motor pump groups

Scheme III

BIK 52 54

L

L1

B

B1 ±10

B2 ±10

B3 ±10

1000 1000 1000 1000 1000 1000 1000 1400 1400 1400 1800 1800 1800

200 200 200 200 250 250 250 700 700 700 950 950 950

500 500 500 500 650 650 650 650 650 650 800 800 800

280 280 280 280 380 380 380 285 285 285 350 350 350

210 210 210 210 380 380 380 365 365 365 450 450 450

120 120 120 120 130 130 130 200 200 200 250 250 250

600 600 600 600 650 650 650 850 850 850 1100 1100 1100

Size 01 02 03 04 05 06 07 08 09 10 11 12 13

H1 ±10

H2 ±10

H3 ±10

180 180 180 180 250 250 250 460 460 460 500 500 500

350 350 350 350 430 430 430 460 460 460 600 600 600

350 350 350 350 430 430 430 560 560 560 650 650 650

Special aggregates, terms of sale

Series

Hmax = required installation highest

Oil burner nozzles

Dimension in mm

Please note the enclosed operation, installation and maintenance instruction!

65

hp

TECHNIK

Accessories and spare parts

www.hptechnik.com

Accessories and spare parts

6.0

hp-Programmable pump controller series µ Con II The µ Con II controller is suitable for deployment with single and double pump systems in continuous or intermittent operation (pressure control only). The number of pumps, the level or pressure switching points and the filling time of the plant are stored. In the program code as standard values, but can be altered and permanently saved within the configuration menu to suit specific customers’ requirements. In the standard version, a connected load of up to PM = 1,5 kW is possible. Additionally, for loads of P > 1,5 kW, a power base-unit is provided which is clamped to the pump controller and constitutes the base unit Article-no. of the modular system. Thus a power transmission up to P ≤ 4,0 kW is possible. 0710050 Fuel oil leakage detector HMS For monitoring leakages. Consisting of a plug-and-socket case with control unit and optical sensor with angel mount for installation in an oil leakage sump. connection: 230 V, IP 20 display: operation mode-green; alarm indication signal-red cable length: 2 m

Article-no. 0720701

Fuel oil leakage detector HMW For monitoring leakages. Consisting of switch box with control unit and optical sensor with angel mount for installation in an oil leakage sump. connection: display:

230 V, IP 20 operation mode-green; alarm indication signal-red

Detector with floating output. Pressure maintaining valves (components not tested) Fixed at 3 bar. After removing of the lead seal, pressure is adjustable.

Safety valves approved as per TÜV

Cable length 2m 10 m 30 m

Article-no. 0720705 0720721 0720722 0720724

Connection G3/8”

Article-no. 0820370

Connection G1/2” and 1”

Article-no. 0820372

Pressure stage 0,2 - 2,5 bar 0,5 - 6 bar 1 - 10 bar 6 - 16 bar 15 - 40 bar

Article-no. 0720670 0720672 0720674 0720675 0720676

Throughput (l/h) 160 600 2000 6000

Article-no. 0820241 0820242 0820243 0820244

Fixed at 3 bar. Not adjustable.

Pressure controller/pressure limiter DSB

Series DSB 140 DSB 143 DSB 146 DSB 152 DSB 170

approved as per TÜV 230 V, 50 Hz, IP 64 as per DIN 3398 Part 4 Temperature range 0 - 70 ° C

Solenoid valve, series D 21 current-freely closed, direct controlled 230 V, 50 Hz for fuel oil EL pmax: 0 - 10 bar

For Lucifer valves please send specified enquiry. 66

Connection G3/8” G1/2” G3/4” G1”

DN 15 15 15 25

Accessories and spare parts

Industrial pumps, overflow valves

Accessories and spare parts

www.hptechnik.com

6.1

Solenoid valve (DIN and TÜV checked) Connection G 3/8” G 1/2” G 3/4” G 1” G 1 1/4”

Regulator for fuel oil EL pressure after regulator: adjustable 0,1 - 1 bar with manometer adjustable 0,2 - 2,5 bar with manometer Admission pressure:

max. 10 bar

DN 10 10 15 15 20

Connection G 1/4” G 3/8” G 1/2” G 3/4” G 1”

Throughput (l/h) 200 600 1000 2000 4500

Throughput (l/h) 180 480 1200 1800 2400

Article-no. 0820256 0820257 0820258 0820259 0820260

Motor pump program, motor pump groups

Plug with rectifier Plug with rectifier with a seperate rectifier with a seperate rectifier with a sep. rectifier (without TÜV)

Article-no. 0820185 0820186 0820187 0820188 0820189

Aggregates for singlepipe installation

Current-freely closed suitable for sucking site for fuel oil EL pmax: 0 - 40 bar

EG 1 series G 1/2” up to 2” GGG 40, G-CuSn10/12 up to 16 bar filter basket 100 and 540 µm, other finenesses upon request - heating (steam/thermal oil, electrical) - magnetic elements - seperate differential pressure indicator/switch

Feed pumps and delivery aggregates

The single filter with screw-on connection Connection: Material: Working overpressure: Filter element: Filter fineness: Options:

EG 2 series DN 20 to DN 150 GGG 40, stainless steel casting 1.4581 up to 16 bar filter basket, filter catridge 100 and 540 µm, other finenesses upon request - heating (steam/thermal oil, electrical) - magnetic elements - differential pressure indicator/switch mounted on the filter - internally coated or rubberised

Accessories and spare sparts

The single filter with flange connection Connection: Material: Working overpressure: Filter element: Filter fineness: Options:

UG 54 series The standard filter with cock change-over facility Connection: Material: Working overpressure: Filter element: Filter fineness: Options:

Oil burner nozzles

TECHNIK

DN 20 to DN 80 GGG 40, G-CuSn 10/12 up to 10 bar filter basket 100 and 540 µm, other finenesses upon request - heating (steam/thermal oil, electrical) - magnetic elements - differential pressure indicator/switch mounted on the filter

Special aggregates, terms of sale

hp

Filter elements A number of filter elements are available for all AKO, Boll & Kirch, Annello and Oventrop filters. Material, shape, filtration area and fineness are optimised to suit the medium. Performance is optimised to suit the filtration task requirements.

67

hp

Accessories and spare parts

www.hptechnik.com

TECHNIK

Accessories and spare parts for hp-Units

6.2

Oil meter HZ 3 for central oil supply – oil heaters - oil meter for perfect consumption control Installation also in oil central heating systems with single pipe system (suction capacity) possible, max -0.3 bar Technical data: Measuring accuracy + 1% Calibrated flow range 0.17 to 12 l/h Max flow range 30 l/h = 25 kg/h Heater output 1.65 kW to 275 kW Connection thread DIN 3852-X-G ¼” inner Type HZ 3 Type HZ 3

Factory-tested calibrated

The oil meter HZ 3 can be used as measuring device for fuel oil EL and diesel. Smallest amounts can be measured with highest accuracy. Just read out your oil consumption. The calibrated oil meter (10 years calibration validity) enables accurate consumer billing and is robust and long-lasting.

Article-no. 0700350

Article-no. 0700351

Oil meter HZ 5 RR with integrated reed contact as “impulse transmitter and mechanical counter” Oil meter HZ 5 for central oil heating systems, installation in pressure and suction pipes possible Accurate consumer control • • • • • • • • • •

Technical data: Measuring accuracy: Fuel oil types: Flow range: Temperature range: Impulse value: Connection thread: Nominal pressure: Dimensions: Pressure loss: Weight:

High data security Consumption can be electronically processed Data can be statistically analyzed Consumption economy calculations possible Robust and long-lasting Energy-efficient and cost-saving Retrofit in each existing heating system Accurate consummation and storage control Alarm system for possible heating malfunctions Optimal use of oil cost deviations Type HZ 5 Type HZ 5 R

with impulse transmitter

_ +1% EL according to DIN 516003 0,7 bis 40 l/h -5 C° – +70 C° 1 Impuls = 0,02 l DIN 3852-X-G1/8“ inner 25 bar 60 x 60 x 85 mm 0.1 to 0.2 bar 0.6 kg

Article-no. 0700352 Article-no. 0700353

Piston oil flow meter Oil and fuel meter with integrated backlash-free piston. Measuring accuracy independent from medium viscosity and density ± 1.0 % of actual value at 1…2 mPa/s

Oil meter type Thread in inch Article-no. Connection pair

Flange model Nominal diameter Article-no. Max flow rate in l/h Continuous flow rate in l/h Min flow rate in l/h Start at approx. l/h Nominal pressure in bar Temperature in C ° Special designs upon request

VZO 4 1/8“ 070 0300 070 0308m

4 – 80 50 1 0,5 25 60 –

VZO 8 1/4“ 070 0308 070 0308m

VZO 15 RC 1/2“ 070 0312 070 0312V

VZO 20 RC 3/4“ 070 0320 070 0320V

VZO 25 RC 1“ 070 0326 070 0327V

VZO 40 RC 2“ 070 0332 070 0332V

8 – 200 135 4 1,6 25 60 –

VZO 15 FL 15 070 0316 600 400 10 4 16 130 25/40

VZO 20 FL 20 070 0323 1500 1000 30 12 16 130 25/40

VZO 25 FL 25 070 0329 3000 2000 75 30 16 130 25/40

VZO 40 FL 40 070 0336 9000 6000 225 90 16 130 25/40

RV 1 / 070 0333 RV 1 / 070 0337 IN 1 / 070 0335 IN 1 / 070 0339

Threaded Flanged Threaded Flanged

Model with teletransmitter Reed impulse transmitter RV Inductive impulse Transmitter IN

68

RE 0,00125 – 0,1 070 032 – 0305 – –

RE 0,00311 / 0,1 / 1 070 0309 – 0311 – –

RV 0,1 / 070 0313 RV 0,1 / 070 0317 IN 0,1 / 070 0315 IN 0,1 / 070 0319

RV 1 / 070 0321 RV 1 / 070 0324 IN 1 / 070 0322 IN 1 / 070 0325

RV 1 / 070 0327 RV 1 / 070 0330 IN 1 / 070 0328 RV 1 / 070 0331

TECHNIK

Oil burner nozzles

www.hptechnik.com

Oil burner nozzles

Industrial pumps, overflow valves

hp

7.0

Motor pump program, motor pump groups

Monarch produces oil burner nozzles for all oils with viscosity to 5 mm2/s (cSt). Special nozzles can be used for oils with a viscosity up to 13 mm2/s (cSt). You find nozzles for other fields of application in industry and farming in our special catalogue or on inquiry.

Aggregates for singlepipe installation

120 mesh or 200 mesh monel screen

FILTER (porous bronze)

CLASS 2A TIP (stainless steel)

ADAPTOR (Brass)

Feed pumps and delivery aggregates

STRAINER (brass support nickel plated)

Spray patterns

NS

AR

PLP

PL

HV

Accessories and spare sparts

R

All MONARCH nozzles are stamped with the following characteristics, subject to modification on adoption of CEN standards: - the flow (in USGPH at l00 PSI = 6.895 bar), (soon, capacity at 10 bar and CEN references); - spray angle; - letters to identify the series of spray patterns; - the, reference MTD-92; - the, MONARCH trade mark. Each MTD-92 nozzle is individually tested at several different production stages to assure perfect conformity with master nozzles of each series. The spray patterns (i.e. hollow cone or solid cone) described below refer to the tests carried out with a 60 °C angle at a 75 mm distance from the nozzle orifice. In nozzles of 60 °C spray angle or less, and for low flows in particular, the empty section of a hollow cone becomes smaller. The difference between hollow cone and solid cone practically disappears.

Oil burner nozzles

Solid cone "R" series: .40 to 3.50 USGPH This is the series supplied regularly unless customer specifies otherwise. It is a good all-round nozzle suitable for most burners. Atomization of the oil is not quite as fine as with the "NS" series. Hollow cons "NS" series: .50 to 2.00 USGPH This series works best on many burners due to its exceptionally fine atomization. Produces a quiet stable flame. Widely used in 80 °C and 90 °C on flame retention burners. Special solid cone "AR" series: .50 to 3.50 USGPH This series has become widely used due to its success in obtaining quiet combustion in some flame retention head burners. Traditionally a "cure-all" replacement nozzle, it now is increasingly specified on original equipment.

Special aggregates, terms of sale

Semi-solid cone "PLP" series: 2.25 to 100.00 USGPH The standard nozzle for larger capacities. Fine atomization and "solid" spray pattern up to about 3.50 USGPH, gradually becoming more and more "hollow" in the larger sizes. Hollow cone "PL" series: 2.25 to 50.00 USGPH This series represents an extension of the "NS" type spray pattern to larger capacity sizes. Spray is not as finely atomized as the "PLP" series, but produces the best results in equipment specifying hollow cone nozzles. Narrow spray angle "HV" series: 1.65 to 60.00 USGPH Used mostly for Semi-Industrial or Scotch Marine applications where narrow spray angle and high spray velocity is essential and some combustion noise is not objectionable. Heavy oil nozzle "HO" series: 1.25 to 100.00 USGPH Designed for use on 70 SSU (approx. 13 centistokes) operating viscosity oil at operating pressures ranging from 200-450 PSIG (13.8 to 31 bar). Write for special data sheet. 69

hp

TECHNIK

Special aggregates

www.hptechnik.com

Special aggregates

8.0

Burner from Riello with hp-Motor pump group SMG

Picture firm Dreizler GmbH

Burner from Dreizler with hp-Motor pump group SMG

Burner from Weishaupt, series RGL 70/1-B 70

Test panel for pumps

TECHNIK

Terms of sale

www.hptechnik.com

Industrial pumps, overflow valves

hp

2. The contract just comes into being by our written order confirmation or by handing over or delivery of the goods. § 3 Prices and terms of payment

6. We will accept return deliveries only after prior agreement (the customer must request the return number), in the original packaging, with a copy of the invoice, with the reason for the complaint, and carriage free. We reserve the right to charge a labour cost flat rate. § 6 Liability 1. In all cases of breach of contractual or advance contractual terms or of legal obligations we are only liable in case of intention or gross negligence.

1. We only accept payment in advance. Bills of exchange, will not be accepted, cheques and credit cards only in case of special agreements and confirmation of cover.

2. In case of a merely negligent breach of an obligation by us or by our agent of vicarious liability we are only liable in case of breach or nonfulfilment of essential duties of the contract and only on the contract typical, foreseeable damage.

§ 4 Deliveries

3. The liability for deceitful concealing of a defect, for taking over of the warranty or a risk of acquisition according to the product liability law and for bodily harms remains is always accepted.

1. Delivery dates and delivery times which can be arranged binding and non-binding are to be made in writing. 2. The dispatch of the goods is only effected on the basis of special agreements and only at the customer's risk and expense. Freight charges are to be advanced by the customer. If delivery is delayed at the customer's request, the risk will pass on to him with announcing of being ready to take delivery. 3. If we are behind in our performances, the claim for compensation is limited to 5 % of the invoice value of the performance concerned. Should the customer, on the basis of legal conditions and on expiry of an appropriate period of grace, claim for compensation instead of the performance or if the performance becomes impossible for us during the delay in delivery, the customer's claim is – in case of slight negligence – limited to a maximum of 10 % of the agreed purchase price. This is not valid if fixed dates have been arranged for the performance we are responsible for. In any case we reserve the right to prove a smaller damage, the customer reserves the right of proving a higher damage than the flat rate. 4. All consignments are insured by us, we thus charge for every order a participation in freight insurance of 2,50 E.

Aggregates for singlepipe installation

1. Our catalogues, indications on our CR-ROM and any other product descriptions serve as information and contain no offer in legal sense. The inquiry is to be made by the customer. We are entitled to accept an offer of the customer within a period of 2 weeks.

5. Claims of the customer as regards bodily harm as well as in case of deceitful concealing of a defect or if taking over of a warranty for the composition or a risk of acquisition are always accepted.

Feed pumps and delivery aggregates

§ 2 Conclusion of a contract

4. Customer's claims regarding material defects come under the statute of limitations one year after the delivery of the goods to the customer.

4. The liability for delay in delivery is regulated in § 4. 5. Exluded is the personal liability of our legal representatives, agents of vicarious and company staff for damages they caused by slight negligence

Accessories and spare sparts

The following terms are valid for all our sales transactions with all our customers, to be precise independent of any concrete indication in particular case for all further legal transactions. Contractual conditions of the customer, particularly in order confirmations but also in any other correspondence will not be accepted unless we would have expressly agreed to them.

3. The customer's claim to subsequent compliance of the contract stipulated in law is to answered at our choice either by subsequent delivery (substitute delivery) or repair.

§ 7 Concluding terms 1. The contract including terms of sale, delivery and payment is exclusively based on and judged according to German right, even if the customer's company is based in a foreign country or if it concerns an export business. 2. Place of jurisdiction for all arguments concerning the legal relationship is the court responsible for Karlsruhe. 3. Should single parts of the above terms be null and void, all other conditions remain valid. The contractual parts shall give, if possible an appropriate effective version to an invalid regulation which corresponds to its economical purpose.

Oil burner nozzles

§ 1 Range of application and scope

Motor pump program, motor pump groups

hp-TECHNIK GmbH General conditions of sale, shipping and payment

§ 5 Defects / Guarantee

2. The customer is obliged to inform us immediately and in writing of detected defects. This applies also to those defects which are revealed after a repair attempt. The customer is obliged to inform us about defects which could not bei considered as hidden defects within 5 days after purchase. Hidden defects have to be communicated to us within 5 days after their detection. If the customer did not inform us by expiry of this deadline, the goods are considered as accepted free of defects.

Impress No part of this catalogue may be reproduced in any form or by any means, electronic or mechanical, including photocopying, without express permission in writing by hp. All rights are reserved under copyright laws in respect to any and all technical data, drawings, etc, contained herein. These service rights – patent rights in particular. The data contained herein has been put together carefully and is, to the best of its authors´ know-ledge, accurate. No guaranty, however, is provided. hp reserves the right to make changes in the interest of technical progress.

Special aggregates, terms of sale

1. The subject matter of the contract is exclusively the purchased item with its features and application in accordance with the manufacturer's product description well-known to the customer. The customer has the possibility to see the corresponding product description before the conclusion of the contract. Other or further features or another application are only regarded as agreed if they have been expressly confirmed by us in writing.

71

hp

TECHNIK

hp-TECHNIK GmbH Industriepumpen, Förderaggregate und Anlagenbau Gablonzer Straße 21 D-76185 Karlsruhe Germany Phone +49 (0) 721 · 9 56 18 - 0 Fax +49 (0) 721 · 9 56 18 - 28 www.hptechnik.com E-Mail: [email protected]