2.5 AC-DC Power supply: PR-240-CE 2.5 AC-DC Power supply: PR-240-CE CB-1 (DC OUT) 12 A DC Breaker CB-2 (AC IN) 5 A AC
Views 79 Downloads 1 File size 410KB
2.5 AC-DC Power supply: PR-240-CE
2.5 AC-DC Power supply: PR-240-CE
CB-1 (DC OUT) 12 A DC Breaker
CB-2 (AC IN) 5 A AC Breaker
K1: AC-OFF detection K2: Backup ON/OFF
Fuse (250 V HT6.3A)
Wiring change for AC input voltage selection (115 V /230V)
VR1, for 24 VDC output voltage adjustment
Jumper Wire for AC input voltage selection (115 V/230 V) (note)
Note: For AC input voltage selection, see page 3-29 for details.
2-14
3.9 PR-240 input voltage modification
3.9 PR-240 input voltage modification PR-240 is shipped for 220 VAC power input. Changing between 230 VAC and 115 VAC is made as shown below. No soldering is required.
Change tap connection. Change jumper connection
Step 1. Changing tap connection
White
4
3
2
1
Black
White
1
Black
220VAC spec. (default)
4
3
2
100VAC spec.
The white wire is connected to #1 and the black #2 in 220 VAC sets. Both white and black wire are connected to #1 in 115 VAC sets.
Step 2. Changing jumper connection Red
SEL 115V
SEL 230V
Change the connection of red wire depending on ship’s mains.
3-29