SECTION 1 : SPECIFICATIONS! INTERVENTION M200 MILITARY OPTICAL SIGHT RAIL PGRS-1 MUZZLE BRAKE BUTTSTOCK AND MONOPOD AS
Views 51 Downloads 2 File size 2MB
SECTION 1 : SPECIFICATIONS!
INTERVENTION M200 MILITARY OPTICAL SIGHT RAIL PGRS-1 MUZZLE BRAKE
BUTTSTOCK AND MONOPOD ASSEMBLY
ADJUSTABLE TRIGGER
PISTOL GRIP
7-ROUND BOX MAGAZINE
CheyTac M200
SOCOM GEAR M200
.408 CheyTac
8mm BB
31 lbs
9 Kg
Length With Stock Collapsed
46 3/4 inches (1187mm)
1189mm
Length With Stock Extended
53 inches !(1346mm)
1366mm
29 inches (737mm)
650mm (inner barrel)
7 rounds
7 rounds
!! Caliber Weight
Barrel Length Magazine Capacity Operation
*
CARRYING HANDLE
BARREL TUBE AND BIPOD ASSEMBLY
Bolt-Action !
Bolt-Action
Muzzle Velocity
419 gr./3030 fps
85 m/s*
Muzzle Energy
11,352 Joules
1.8 Joules*
Effective Range
2000+ meters
50 meters
Temperature at 25 degrees Celsius
01
SECTION 2 : SET UP AND OPERATING INSTRUCTIONS!
1
INITIAL SET UP and SYSTEM DISASSEMBLY. The M200 rifle is delivered
technical inspection or a detailed cleaning. Basic set up is as follows:
assembly and depress the locking button on each bipod leg and fold the bipod legs into the down-and-locked position. 1:1
1. Turn to correct position
2. Lock the Screw.
CLICK!
Push this botton
02
3. Put down the bipod
SECTION 2 : SET UP AND OPERATING INSTRUCTIONS!
Screw the bolt handle into place.
gluing is recommended.
If you have not already done so, extend the buttstock assembly.
WHEN THE STOCK IS EXTENDED, ENSURE THE STOCK IS LOCKED IN PLACE.
03
SECTION 2 : SET UP AND OPERATING INSTRUCTIONS!
2
OPERATING AND SHOOTING THE M200 INTERVENTION RIFLE. Operating the INTERVENTION rifle consists of gas charging, operating the safety, loading the "#$ %" "# $ " " $ & $ " $ " GAS CHARGING Unlock bolt by rotating the bolt handle upward and pull the bolt back to the rear most position.Charging the gas through the gas valve, then push the bolt forward and bolt handle downward to lock the bolt.
OPERATING THE SAFETY. The INTERVENTION rifle uses the Remington trigger group and the safety. As with the Remington series rifles, the forward position is the FIRE position. The rear position is the SAFE position. The safety switch will only move to the safe position with the weapon cocked. The rifle cocks on unlocking the bolt. Once you lift the bolt on the $ SAFE position.
04
SECTION 2 : SET UP AND OPERATING INSTRUCTIONS!
LOADING THE MAGAZINE 7.95~ 7.9 7 mm
N OT E : The Accuracy of M200 is related with 8mm BB bullet’s precision. More roundness the 8mm BB could be, the more steady performance M200 will be. High Precision 8mm BB bullet is recommended.
WARNING! This airsoft toy is designed for BB bullet shooting purpose only. SOCOM GEAR M200 toy cartridge is the only cartridge should be used. Any LIVE ammunition is prohibited and CAN NOT insert into chamber. Wrong cartridge could cause damage of toy, injury people, or shooter himself.
05
SECTION 2 : SET UP AND OPERATING INSTRUCTIONS!
I. Position the cartridge bottom just forward of the magazine feed lips at the top of the magazine.
II. Press the cartridge down into the magazine until the cartridge bottom clears the feed lips.
III. Push the cartridge to the rear of the magazine.
06
SECTION 2 : SET UP AND OPERATING INSTRUCTIONS!
IV. Continue this until you have the desired rounds loaded or a full magazine.
LOCKING THE MAGAZINE INTO THE RIFLE. There are essentially two %" "# "# ' the AR-15/M-16 method in which the operator simply sshoves the magazine into the magazine well and a lock engages into the side of the magazine. The second method is similar to the AK-47 locking method. This is done when the magazine is tipped forward slightly and then the magazine is snapped sharply to the rear and up, locking the magazine in place. These locking mechanisms "# ; =;