ENhanced TEChnology www.entecene.co.kr Solid Dielectric Pad Mount Switchgear Ver. 2.0 Prolog World is moving out t
Views 63 Downloads 0 File size 3MB
ENhanced TEChnology
www.entecene.co.kr
Solid Dielectric Pad Mount Switchgear
Ver. 2.0
Prolog
World is moving out to the Universe to find out how to protect and not destroy the earth. As the global warming is the top issue in 21centry, Electric Power System must be seeking an innovation to support making clean world. Solid Dielectric Product would be one of the best solution, removing SF6 gas and supply non-gas product, it will provide not only clean world but also safer Power Distribution System. Solid Dielectric Pad Mount Suitchgear for Underground Power Distribution System are used to minimize outage time and area. Solid Dielectric Pad Mount Suitchgear use Vacuum Interrupter with independent phase structure and magnetic actuator as an operation mechanism. Above of all, by removing SF6 gas use, Solid Pan Mount Switchgear increases safety and guarantees maintenance free Operation. In addition, Solid Dielectric Pad Mount Suitchgear has embedded Partial Discharge Diagnosis, this monitoring system can check not only by using interface software at the site but also by a remote communication at the control center station.
Solid Dielectric Pad Mount Switchgear
Safety
Feature
Environmentally Friendly Product
•Explosion free by gasless •Maintenance free by Epoxy molding structure
Ratings
2_3
•Free from global warming SF6 gas use
New Technology
Convenience
•Embedded Partial Discharge Monitoring(Local/Remote) •Extra slim control(Extra compact size) •Main switching & Earth switching using Vacuum Interrupter •Embedded vacuum interrupter
•Independent phase structure •Remote Communication Using ETCCU104 Protection Relay With Built-in RTU
Item
Unit
Rated Maximum voltage
kV
Load Break Switch 15
27
15
Circuit Breaker 27
Rated continuous current
A
630
630
630
630
Closed loop and load breaking current
A
630
630
630
630
Cable charging breaking current
A
25
25
25
25
Transformer magnetizing breaking current
A
21/15
21/15
21/15
21/15
Short circuit breaking capacity
kArms
-
-
12.5
12.5
Symmetrical short time current, 1 sec
kArms
12.5
12.5
12.5
12.5
Peak withstand current
kApeak
32.5
32.5
32.5
32.5
Short circuit making current
kApeak
32.5
32.5
32.5
32.5
Basic impulse withstand voltage(1.2 x 50㎲)
kV
85/110
125
110
125
Power frequency withstand voltage, dry
kV
50
60
50
60
DC withstand voltage, 15min.
kV
53
78
53
78
Corona extinction voltage
kV
11
19
11
19
Solid Dielectric Pad Mount Switchgear Technical Characteristics
Characteristics
Circuit Breaker
Load Break Switch
• Separate Main & Earth switching in vacuum interrupter
• Separate Main & Earth switching in vacuum
with safety interlock
interrupter with safety interlock
• Magnetic Actuator Mechanism (Open/Close Indicator)
• Spring toggle mechanism (Open/Close Indicator)
• Independent phase structure
• Independent phase structure
• Inter-source power supply for Relay control
• Inter-source power supply for Relay control
• Voltage Sensing(Capacitor Voltage Divider /
• Voltage Sensing(Capacitor Voltage Divider /
Resistor Voltage Divider) • Auto Load Transfer Switch (option) • Rechargeable Battery(24V) for dead line CB operation • Emergency Trip Device (option) • Operation counter
Resistor Voltage Divider) • Live line detector (option) • Manual operation handle • Operation counter
Voltage/Current sensing bushing
Live-Line Indicator(Manual type switchgear)
• Current Transformer : 1000 :1 ratio(User’s choice)
• Live line indicator is provided on each circuit for safety
• Accuracy : CVD type : 2.5%(Standard)
RVD type P/T : 1%(option) • Epoxy bushing : ANSI or DIN standard
Battery • 24V DC, 40AH
Earth Terminal • Convenient earthing
Manual Trip Device(Option) • In case of No external power source and Battery Dead,
Operation is available • Consist of Lithium lon Battery DC 15V
Embedded Partial Discharge Diagnosis
•WSPDA : Window Step Partial Discharge Analysis •PD metering in accordance with IEC20270
and IEEE Std.1291 •Corona, Inner PD, Noise detection •Real time data transfer (Phase A,B,C, PD magnitude,
Angle) •PD pickup value setting available from the remote •PD Osc’(∅-q) / PRPDA (∅-q-n) •PD status and value can be monitored with on-line &
real time equipment •Easy to build Database from Diagnosis data •Power Distribution 15kV, 27kV, 38kV
• Dead line operation available during 48hours • Rechargeable by auxiliary power source(110/220Vac)
Solid Dielectric Pad Mount Switchgear
Switchgear menu
Total Number of Circuit
Total Number of Circuit
Configuration
4 Load Break Switch
Configuration
6
ETPS1-4-2S1B1W-A-E Circuit Break
4_5
ETPS2-6-2S3B1W-A-E
Direct Way
Switch Without Earth
* MULTIPLE COMBINATION OF CIRCUITS ARE AVAILABLE
Ordering menu : 1~6
G : Gas type S : Solid type
1 : 15kV 2 : 27kV
N : Total number of way(1~6)
Ex) ETPG1-6-2S4B-A-WE , ETPS2-4-2S2B-A-E
S : Load Break Switch B : Circuit Breaker W : direct way SW : Switch without Earth
E : Earthed M : Manual NE : Not Earthed E : Electrical A : Auto(Built-In RTU option)
Control Part
Contorl : ETCCU104
Control Protection and Metering
Protection
Metering
• Time Current Curve editable
• Voltage, Current
• IEEE, IEC and 37 non-standard inverse time curves
• Demand watts and VARs and frequency
• Protective settings in nonvolatile memory during power failure
• Load Profile data & Ocillogram
• Delay time overcurrent protection(51P,51G)
• Power-KW/KVAR/KVA
• Instantaneous overcurrent protection(50P,50G)
• Power factor
• Negative sequence overcurrent protection(46)
• 3PH Power-KVA/KW/KVAR/PF
• Cold load pickup and sequence coordination
• Energy
• Underfrequency and load shedding(81) • Undervoltage, overvoltage detection and alarm(27,59)
• RS232 Ports, RS 485, TCP/IP Ports
Remote Communication
• DNP3.0, IEC60870-5-101/104, MODBUS Protocol available • Built-In RTU (Option) • Setting, Metering and Data records accessible
(Pos’ W/H, Pos’ V/H, NEG’s W/H, NEG V/H)
Solid Dielectric Pad Mount Switchgear Construction
25.8kV Solid Pad Mount Switchgear (2S2B)
!
!
Construction
!
Table of Locations 1 2 3 4 5
6 7 8 9 10
Main Switch Earthing Switch Circuit Breaker Epoxy Housing Manual Operation Handle
11 12 13 14 15
Controller Control Power Switch Emergency Trip Device Lifting lugs Capacitor Box
Battery Box Modem Bracket PT CT Earthing Terminal
25.8kV Solid Pad Mount Switchgear (3S2B)
78-6
78-6
78-6
5)16;?
5)16;?
+47;-
78-6
+7=6