• Author / Uploaded
• Sami Vehmas

Citation preview

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools Price List

Diagnostic tools

Date of issue: June 17th, 2013 Validity: Until September 30th, 2013

Prepared by:

Supervised by:

Authorised by:

Carolina Pulgar Sales Manager

Ricardo Domínguez Manager of CSC Services

Ricardo Domínguez Manager of CSC Services

17/06/2013

17/06/2013

17/06/2013

PRICELIST DIAGNOSTIC TOOLS 2013

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

LCA1 (CMC4+ Access Control Key) All the diagnostic tools we have in these document can be used in CMC4+. We just need to connect the LCA1; it’s an access control key, very easy to activate with the KeyActiv software delivered with the key.

Description

Code

Price

LCA1, CMC4+ Access control key

1770302440

35 €

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

ThyssenKrupp Lift Diagnostic Tool (LD2T) ThyssenKrupp Lift Diagnostic Tool (LD2T) is a software for parameterization and diagnostic of CMC4/CMC4+ lifts. For CMC4+ it’s necessary to connect the LCA1 in the controller board. Then you need to connect the USB2CMC4 and you will get your license.

Main features of LD2t are: integration of different modules (Parameterization, Diagnostic, programming …), easy to use, intuitive visual interface, multilanguage. Edit and enquiry parameters: MOTOR

CAR

PIT

GENERAL

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

Information about all the boards in the system: failure stack, inputs/outputs, firmware versions…

Description

Code

Price

ThyssenKrupp Lift Diagnostic Tool (LD2T) license *

1099999940

490 €

TKE Firmware Updater USB Dev. (TKE-USB) (similar to the USB2CMC4 programmer) + USB 2.0 cable for PC connection

1026641901 (new reference

( It’s necessary for License generation)

number for CMC4+)

85 €

It’s possible to use also the USB2CMC4 (reference number 1770302280)

Delivery time: Upon request

* The software LD2T (software + users manuals) needed for this license, would be supplied by the CSC Service ([email protected]). It is necessary to inform about the Technical Responsible person of the local ThyssenKrupp brand, because he is the only person that will be authorized to download the software by the Extranet.

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

DiagPDA Software Available for CMC controllers (CMC3 and CMC4/CMC4+) Diagnostic Software developed for its installation in PDA devices. Minimum requirements for PDA: •

Bluetooth: any COM port can be selected between 0 and 9.

•

Screen: Minimum resolution required: 320x240 (QVGA) or 640x480 (VGA) pixels.

•

Operating system: Only compatible with Windows Mobile 6.

•

USB connection: For PDA software installation, a connection with the PC is required.

CMC3-CMC4/CMC4+ controllers interface: Connecting this interface to the DB9 connector available in CMC3 and/or CMC4 main control board a Bluetooth communication is established between the controller and the PDA.

Main features: Same functions as POME tool with enhanced features. ƒ

Function 1– Current elevator failure.

ƒ

Function 2- Elevator mode: Normal, Inspection….

ƒ

Function 3 – Failure stack

ƒ

Function 4 – Failure stack reset ( all failures are deleted)

ƒ

Function 5 – Call generation

ƒ

Function 7 – Car contacts value

ƒ

Function 8 – Maximum doors opened time

ƒ

Function 24 – Positioning system configuration (vanes-flags)

ƒ

Function 25 – Direct access to memory, all parameters available

Available languages: Spanish, English, French, German. Protected by password renewed every 6 months.

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

Scope of supply and price Ex-works Madrid (Incoterms 2000):

Description

Code

Price

Bluetooth INTERFACE to CMC series

10.2664.59.01

85 €

License for DiagPDA *

10.2664.82.01

300 €

Delivery time: Upon request * The software DiagPDA (software + users manuals) needed for this license, would be supplied by the CSC Service ([email protected]). It is necessary to inform about the Technical Responsible person of the local ThyssenKrupp brand, because he is the only person that will be authorized to download the software by the Extranet.

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

DiagPC laptop sofware Available for CMC controllers (CMC2-CMC3-CMC4/CMC4+) Diagnostic Software developed for its installation in laptops. Minimum requirements for laptop: •

Bluetooth or USB-bluetooth adapter can be used.

•

Screen: Minimum resolution required: 1024x800 or 1280x1024..

•

Operating system: Windows XP .

•

USB connection: For PDA software installation, a connection with the PC is required.

CMC3-CMC4/CMC4+ controllers interface: Connecting this interface to the DB9 connector available in CMC3 and/or CMC4/CMC4+ main control board a Bluetooth communication is established between the controller and the laptop. Same controller as DiagPDA software. For CMC4+ it’s necessary to connect the LCA1.

Main features: Same functions as POME tool with enhanced features. ƒ

Function 1– Current elevator failure.

ƒ

Function 2- Elevator mode: Normal, Inspection….

ƒ

Function 3 – Failure stack

ƒ

Function 4 – Failure stack reset ( all failures are deleted)

ƒ

Function 5 – Call generation

ƒ

Function 7 – Car contacts value

ƒ

Function 8 – Maximum doors opened time

ƒ

Function 9-23 – Different parameters functions

ƒ

Function 24 – Positioning system configuration (vanes-flags)

ƒ

Function 25 – Direct access to memory, all parameters available

Available languages: Spanish, English, French & German. Protected by license.

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

Scope of supply and price Ex-works Madrid (Incoterms 2000):

Description

Code

Price

Bluetooth INTERFACE to CMC series

10.2664.59.01

85 €

License for DiagPC *

10.2679.60.01

300 €

Delivery time: Upon request * The software DiagPC (software + users manuals) needed for this license, would be supplied by the CSC Service ([email protected]). It is necessary to inform about the Technical Responsible person of the local ThyssenKrupp brand, because he is the only person that will be authorized to download the software by the Extranet.

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

BoMo Available only for CMC4/CMC4+ ( in CMC4+ connect the LCA1 Access Control Key). The low-cost control panel, BoMo, allows the maintenance and assembly personnel basic operations such as: •

Car movement: Cabin level is shown. Cabin can be sent to top and bottom level. Cabin call submode. Cabin movement along the shaft in emergency mode

•

Front and rear door control: open/close Doors form both access.

•

Failure stack mode: current failure will be displayed with level information available. Complete stack can be reviewed and then deleted.

•

Parameter mode: 21 parameters can be checked and changed if necessary.

•

Special Functions: Battery level display. Main control board temperature display. Machine room trip temperature change, for inspection. E2PROM parameters copy from one main control board to another.

Protected with a limited number of uses available; It’s programmed for 400 connections, (with about 2 connections per day, the tool would be in use more or less one year).

Scope of supply and price Ex-works Madrid (Incoterms 2000):

Description

Code

Price

10.2664.29.01

95 €

BoMo, low-cost assembly control panel + connection cable to DB9 connector in CMC4 main board + parameter copy special cable

Delivery time: Upon request

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

TKE Firmware Updater USB Dev. (TKE-USB) (USB2CMC4 Programmer) The USB2CMC4 programmer is an USB-RS232 interface which allows the firmware actualization for all CMC4 (UCM main control board, UCC car control board, UCP, and Landing boards) and CMC4+ boards. Other TKEMF new designs using Renesas microcontrollers can also be upgraded with this tool (SUS CMC3 boards, LCD TKE display with voice announcer…) New TKE-USB can be used for CMC4/CMC4+. It’s equal to the USB2CMC4 but internally modified.

This programmer has been specially design for this firmware upgrade so all CMC4/CMC4+ boards are protected against any copy attempt, it is the only tool that can be used for this purpose. The software needed for this firmware upgrade, called TPT, would be supplied by the CSC Service ([email protected]). Scope of supply and price Ex-works Madrid (Incoterms 2000): Description

Code

Price

New TKE-USB TKE Firmware Updater USB Dev. (TKE-USB)

reference number

USB 2.0 cable for PC connection included

1026641901

85 €

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

In case you already have a USB2CMC4 programmer you will need an adapter for connecting it to the new CMC4+ boards.

Description USB2CMC4 interface for CMC4+ connection

Delivery time: Upon request

Code reference number 1770302480

Price 25 €

ThyssenKrupp Elevator SEAME CSC Services

Diagnostic Tools 2013

Diagnostic Tools

Brake Test Tool Specially developed test tool for applying the verification protocol in gearless machines, in accordance to standard EN81 For CMC4. In CMC4+ in already included. Description

Code

Price

Brake test box

10.2693.90.02 replacing the old model of Brake Box with code

68 €

1026939001

Brake Test connection wiring

10.2693.92.01

31 €