• Author / Uploaded
• zulikram

Citation preview

OVERVIEW

| bakerhughes.com

SURFSWEEP CLW3060 Pipeline Cleaner Water soluble cleaner for natural gas pipelines

Application The Baker Hughes SURFSWEEP™ CLW3060 pipeline cleaner is an anionic, water soluble surfactant designed to penetrate and dissolve organic deposits in natural gas pipelines. It is an excellent choice for areas where oil soluble cleaning agents cannot be used. This product leaves solids and metal surfaces water wet, allowing the solids to be easily removed from the system during normal pipeline pig runs. SURFSWEEP CLW3060 pipeline cleaner works well in the removal of deposits caused by organic compounds, iron sulfide, salt, mineral scales and sulfur. SURFSWEEP CLW3060 pipeline cleaner should be applied to the pipeline by batch treatment during pig runs. Typical treatment rates are 0.25 to 0.50 gallons of this product / diameter inch / pipeline mile. SURFSWEEP CLW3060 pipeline cleaner should be mixed with water to make a Typical properties (may include other properties not listed below)

10% solution before application in the pipeline. Pipelines should be cleaned on a monthly or quarterly basis, depending on the amount of solids in the system. Your Baker Hughes representative can evaluate your system’s performance, specify the appropriate treatment and equipment, and design a comprehensive application program.

Applications Crude

oil and gas transmission lines

Petrochemical

processed product transmission lines



Crude oil and gas gathering systems

Offshore

Hydrocarbon

storage tanks

Materials compatibility

Features and benefits

Suitable: Metals:

Removes

admiralty brass, copper, 304 stainless steel, 316 stainless steel, mild steel Plastics: HD polypropylene, PLEXIGLAS®, HD polyethylene, PVC, fiberglass Elastomers: TEFLON®, VITON®, neoprene, HYPALON®, Buna N (rubber)

oil, grease and other solids from surfaces – Improves pipeline efficiency

Biodegradable

– Environmentally friendly Provides

Materials suitability is based on analysis of test results obtained under specified laboratory conditions. All materials selection should be based on actual application. Testing results for materials will be made available on request.

1.032

Typical density at 60°F (15.6°C)

8.6 lbm/US gal (1030.5 kg/m3)

Flash point, closed cup

91.9°F (33.3°C)

Safety and handling

Pour point

-15°F (-26.1°C)

Viscosity at 77°F (25°C)

20 cP

Before handling, storage, or use, review the Safety Data Sheet (SDS) for guidance.

good suspension of solids

– Easily removes debris from the pipeline

Not suitable: Metals: aluminum

Specific gravity at 60°F (15.6°C)

SURFSWEEP is a trademark of Baker Hughes, Incorporated. TEFLON, VITON and HYPALON are registered trademarks of E. I. DuPont de Nemours and Company. PLEXIGLAS is a registered trademark of Arkema France Corporation. Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.

© 2014 Baker Hughes Incorporated. All rights reserved. 42090 BPPOCLW3060 11/2014

flowlines and risers