• Author / Uploaded
• Vitaliy Poberezniy

Citation preview

ALCA LUCENT 7750 SERVICE ROUTER AND 7450 ETHERNET SERVICE SWITCH INTEGRATED MEDIA MODULE

The Alcatel-Lucent 7750 Service Router (SR) and 7450 Ethernet Service Switch (ESS) Integrated Media Modules (IMMs) are a family of 50-Gb/s, 100-Gb/s and 200-Gb/s (full duplex) line cards designed for high-capacity and high-speed IP/MPLS-based routing and services applications. The IMMs deliver high-density Gigabit Ethernet (GigE) and 10GigE, as well as support for SONET/SDH OC-768c/STM-256c, 40GigE and 100GigE interfaces with support for advanced traffic management with Hierarchical Quality of Service (H-QoS), a full range of Layer 2 and Layer 3 routing capabilities, Layer 2 and Layer 3 VPN services and residential services.

2-port 100GigE IMM CFP

20-port 10GigE IMM SFP+

48-port GigE IMM SFP

Designed to enable service providers to keep pace with exponential growth in network traffic, the IMM family is optimized for locations in the network that require high-density GigE/10GigE, high-speed 40-Gb/s and 100-Gb/s interfaces, and high performance IP/MPLS routing and services. Available on the Alcatel-Lucent 7750 SR and 7450 ESS (SR/ESS), IMMs deliver up to 200 Gb/s of full-duplex line-rate performance. IMMs support a comprehensive set of IP/ MPLS-based protocols and advanced traffic management capabilities, making them ideal for high-performance routing applications, including edge service aggregation, IPv4/ IPv6 peering, IPv4/IPv6 multicast, Internet exchange peering, IP transit services and high-capacity edge-core connectivity. H-QoS and hardware-based shaping, policing, and traffic management are supported to ensure high-quality delivery of voice, video, IPTV and other multiservice applications. Support is also provided for the full range of Layer 2 and Layer 3 services, including virtual private wire services (VPWS), virtual private LAN services (VPLS), IP virtual private network (IP VPN) services and Internet access services. Synchronous Ethernet (SyncE) support is available on all optical-based Ethernet IMM cards to enable the distribution of

precision network timing and synchronization over native Ethernet. Using SyncE, service providers can deliver reliable, high-quality, synchronous applications, including TDM voice, circuit emulation and synchronous mobile backhaul, over highly scalable and cost-effective Ethernet networks. Available on the Alcatel-Lucent 7750 SR and 7450 ESS, the IMMs are fully supported by the Alcatel-Lucent 5620 Service Aware Manager (SAM) and support in-service insertion and removal.

IMM LICENSING The features supported on an IMM are determined by the feature license purchased with the IMM. Feature licenses for IMMs are offered with tiered levels of functionality for Layer 2 and Layer 3. IMMs with Layer 3 feature licenses can add optional Virtual Private Routed Network (VPRN) licenses that determine IP VPN scaling supported on the IMM. IMM licensing gives customers the flexibility to purchase the license to meet current requirements with a simple, in-place upgrade to additional features without changing the IMM hardware. Tables 1 and 2 summarize the IMM feature licenses offered on the Alcatel-Lucent 7450 ESS and 7750 SR chassis.

Table 1. IMM feature licenses FEATURE LICENSE

DESCRIPTION

NOTES

L3BQ

Layer-3 Basic Queuing

Full IPv4/IPv6 routing with 8 ingress/8 egress queues per port No support for hierarchical policing

L2HQ

Layer-2 High Queuing

ESS feature set equivalence with IOM3-XP Full queuing, policing support for Layer 2 features

L3HQ

Layer-3 High Queuing

Full queuing and hierarchical policing Full IPv4/IPv6 routing

Table 2. IMM VPRN feature licenses FEATURE LICENSE

NOTES

Infrastructure VPRN

Support for up to eight (8) VPRN instances per IMM licensed with L3BQ or L3HQ

Service VPRN

Support for fully scaled VPRN instances per IMM licensed with L3BQ or L3HQ

IMM features and benefits • Flexible, tiered feature licensing allows customers to pay only for the functionality required and allows for in-place feature upgrades without changing the IMM hardware • Advanced H-QoS for assured service delivery on a per-subscriber and per-service basis • Line-rate ACL filtering with tens of thousands of configurable ingress/egress access control lists for highly enhanced subscriber management, security and control • Scalable IPv4/IPv6 routing (BGP, OSPF and IS-IS with traffic engineering extensions) supporting the full range of network routing and service delivery needs • Interoperability with existing Input/Output Module/Media Dependent Adapter (IOM/MDA) combinations, allowing con­ figurations to be deployed flexibly and seamlessly in existing environments, with full operational continuity • Extensive Operations, Administration and Maintenance (OAM) tool set, which provides tightly integrated visibility, management and control of the platform, network and services • Fully managed by Alcatel-Lucent 5620 SAM

Ethernet IMM features and benefits • Up to 200 Gb/s (full duplex) of line-rate throughput line-rate performance that does not degrade as enhanced services are enabled

• ITU-T-compliant SyncE for distribution of precision network timing and synchronization over native Ethernet. Using SyncE, operators can reliably deliver synchronous-based applications — including TDM voice, circuit emulation services and mobile backhaul services — directly over Ethernet

• Configurable wavelengths span the C-Band, software configurable in 50-GHz increments, representing a total of 88 different wavelengths

• Comprehensive 802.3ah-based Ethernet service OAM capabilities. The SR/ESS IMM supports a comprehensive set of integrated Ethernet service OAM capabilities to speed service deployment and simplify operations, maintenance and troubleshooting

• ITU-T G.709 OAM support, including alarm indication signal (AIS), forward defect indication (FDI), open connection indication (OCI) and payload missing indication (PMI)

• Pluggable optics (SFP, SFP+, XFP, QSFP+ and CFP) with Digital Diagnostic Monitoring (DDM) for extended OAM support; DDM measures key optical parameters in real time to improve installation, activation and troubleshooting, while reducing overall operational costs • Provider Backbone Bridge (802.1ah) support for large Layer 2 network subscriber and network scalability needs • WAN and LAN PHY support options for 10GigE cards

40 Gb/s IMM with integrated tunable DWDM optics features and benefits • Two variants: ¬ 1-port OC-768c/STM-256c SONET/SDH IMM supporting OTU3 or SONET/SDH inside OTU3 framing options and data rates ¬ 1-port 40GigE IMM supporting OTU3 or Ethernet inside OTU3 framing options and data rates

7750 Service Router and 7450 Ethernet Service Switch Alcatel-Lucent Data sheet

2

• Standards-compliant G.709 Forward Error Correction (FEC) and Enhanced FEC (EFEC) algorithms extend optical reach for long-haul applications

• Comprehensive OTU statistics and show commands, including Severely Errored Seconds (SES), Errored Seconds (ES), corrected bits and uncorrectable sub-rows • Allows the Alcatel-Lucent 7750 SR and 7450 ESS to be interconnected directly to existing DWDM systems, thereby eliminating the need for external transponders and reducing cost and complexity • Provides operators with increased flexibility and efficiency in the use of DWDM wavelengths • Reduces the cost and overhead of maintaining spares for disparate wavelengths at each location • Used in transport of OC-768c/STM-256c or 40GigE across optical transport infrastructure, reaching 80 km without requiring optical signal amplification or dispersion compensation • For long-haul applications, EFEC provides additional coding gain to extend optical transport distances up to 2000 km, dependent on fiber conditions and amplification • When used in conjunction with Alcatel-Lucent transport equipment, Wavelength Tracker™ provides a powerful tool for streamlining end-to-end monitoring and adjustment of signal integrity across the network

Table 3 provides a summary of the technical specifications for the IMMs. Table 4 provides IMM ordering information. Table 3. Alcatel-Lucent 7750 SR/7450 ESS Integrated Media Module density-by-chassis type

IMM TYPE

INTERFACE TYPE

CONTROL PROCESSOR

SYNC ETHERNET SUPPORT

SLOT THROUGH­ PUT

MAXIMUM PORTS PER 7750 SR/ 7450 ESS CHASSIS SR-12E

SR-12/ ESS-12

SR-7/ESS-7

2-port 100GBASE IMM – CFP

100GigE Small Form Factor Pluggable Optics (CFP Optics)

FP3

10 core

Yes

200 Gb/s

18

20

10

1-port 100GBASE IMM MultiCore – CFP

100GigE Small Form Factor Pluggable Optics (CFP Optics)

FP3

10 core

Yes

100 Gb/s

9

10

5

1-port 100GBASE IMM – CFP

100GigE Small Form Factor Pluggable Optics (CFP Optics)

FP2

Single core

Yes

100 Gb/s

-

10

5

6-port 40GBASE IMM - QSFP+

40GigE Small Form Factor Pluggable Optics (QSFP+ Optics)

FP3

10 core

Yes

200 Gb/s

54

60

30

3-port 40GBASE IMM - QSFP+

40GigE Small Form Factor Pluggable Optics (QSFP+ Optics)

FP2

Single core

Yes

100 Gb/s

-

30

15

1-port 40GBASE IMM with tunable DWDM optics

Fixed Optic – LC connector

FP2

Single core

Yes

50 Gb/s

9

10

5

20-port 10GBASE IMM – SFP+

10GigE Small Form Factor Pluggable Optics Plus (SFP+ Optics)

FP3

10 core

Yes

200 Gb/s

180

200

100

12-port 10GBASE IMM MultiCore – SFP+

10GigE Small Form Factor Pluggable Optics Plus (SFP+ Optics)

FP3

10 core

Yes

120 Gb/s

108

120

60

12-port 10GBASE IMM – SFP+

10GigE Small Form Factor Pluggable Optics Plus (SFP+ Optics)

FP2

Single core

Yes

100 Gb/s

-

120

60

8-port 10GBASE IMM – XFP

10GigE Small Form Factor Pluggable Optics (XFP Optics)

FP2

Single core

Yes

50 Gb/s

-

80

40

5-port 10GBASE IMM – XFP

10GigE Small Form Factor Pluggable Optics (XFP Optics)

FP2

Single core

Yes

50 Gb/s

45

50

25

48-port 1000BASE IMM Rev B – SFP

GigE Small Form Factor Pluggable Optics (SFP Optics)

FP2

Six core

Yes

50 Gb/s

432

480

240

48-port 1000BASE IMM – SFP

GigE Small Form Factor Pluggable Optics (SFP Optics)

FP2

Single core

Yes

50 Gb/s

432

480

240

48-port 10/100/1000BASE IMM – RJ-45

RJ-45

FP2

Single core

No

50 Gb/s

432

480

240

1-port OC-768c/ STM-256c SONET/ SDH IMM with tunable DWDM optics

Fixed Optic – LC connector

FP2

Single core

N/A

50 Gb/s

9

10

5

7750 Service Router and 7450 Ethernet Service Switch Alcatel-Lucent Data sheet

3

FP TECH­ NOLOGY

Table 4. Alcatel-Lucent 7750 SR/7450 ESS Integrated Media Module ordering information PART NUMBER

PART NAME

DESCRIPTION

IMM FEATURE LICENSE L3BQ

L2HQ

L3HQ

3HE07303BA

3HE07303CA

3HE07303AA

IMM - 7x50 2-PT 100GE CFP

7x50 2-port 100GigE IMM. Provides 2 physical 100GigE ports that accept CFP pluggable optical modules.

3HE07159BA

3HE07159CA

3HE07159AA

IMM - 7x50 1-PT 100GigE MultiCore CFP

7x50 1-port 100GigE MultiCore IMM. Provides 1 physical 100GigE port that accepts CFP pluggable optical module.

3HE05814BA

3HE05814AA

3HE05053AA

IMM - 7x50 1-PT 100GigE CFP

7x50 1-port 100GigE IMM. Provides 1 physical port that accepts CFP pluggable optical module.

3HE07304BA

3HE07304CA

3HE07304AA

IMM - 7x50 6-PT 40GigE QSFP+

7x50 6-port 40GigE IMM. Provides 6 physical ports that accept QSFP+ pluggable optical modules.

3HE06721BA

3HE06721AA

3HE06320AA

IMM - 7x50 3-PT 40GigE QSFP+

7x50 3-port 40GigE IMM. Provides 3 physical ports that accept QSFP+ pluggable optical modules.

3HE06798BA

3HE06798CA

3HE06798AA

IMM -7750 1-PT 40GigE DWDM TUN

7x50 1-port 40GigE IMM. Provides 1 physical 40GigE port (LC Connector) that has integrated tunable DWDM optic transponder.

3HE07305BA

3HE07305CA

3HE07305AA

IMM 7x50 20-PT 10GigE SFP+

7x50 20-port 10GigE IMM. Provides 20 physical 10GigE ports that accept SFP+ pluggable optical modules.

3HE07158BA

3HE07158CA

3HE07158AA

IMM 7x50 12-PT 10GigE MultiCore SFP+

7x50 12-port 10GigE MultiCore IMM. Provides 12 physical 10GigE ports that accept SFP+ pluggable optical modules.

3HE05553BA

3HE05553AA

3HE04743AA

IMM - 7x50 12-PT 10GigE SFP+

7x50 12-port 10GigE IMM. Provides 12 physical 10GigE ports that accept SFP+ pluggable optical modules.

3HE05899BA

3HE05899AA

3HE06431AA

IMM - 7x50 8-PT 10GigE XFP

7x50 8-port 10GigE IMM. Provides 8 physical 10GigE ports that accept pluggable XFP modules.

3HE05898BA

3HE05898AA

3HE06430AA

IMM - 7x50 5-PT 10GigE XFP

7x50 5-port 10GigE IMM. Provides 5 physical 10GigE ports that accept pluggable XFP modules.

3HE06722BA

3HE06722AA

3HE06326AA

IMM - 7x50 48-PT GigE Rev-B SFP

7x50 48-port GigE IMM Rev B. Provides 48 physical GigE ports that accept pluggable SFP modules.

3HE05895BA

3HE05895AA

3HE06428AA

IMM - 7x50 48-PT GigE SFP

7x50 48-port GigE IMM. Provides 48 physical GigE ports that accept pluggable SFP modules.

3HE05896BA

3HE05896AA

3HE06429AA

IMM - 7x50 48-PT GigE TX

7x50 48-port GigE IMM. Provides 48 physical GigE ports with RJ-45 connectors.

3HE05813BA

3HE05813AA

3HE05055AA

IMM - 7x50 1-PT OC-768 DWDM TUN

7x50 1-port OC-768/STM-256 IMM. Provides 1 physical OC-768c/STM-256c port (LC Connector) that has integrated tunable DWDM optic transponder.

Technical specifications Specifications listed are hardware capabilities. Some capabilities depend on support in a specific SR OS release or future release.

Dimensions and weights • Standard full slot form factors are common to all variants. ¬ Height: 3.6 cm (1.4 in.) ¬ Width: 42.5 cm (16.8 in.) ¬ Depth: 43.2 cm (17.0 in.) • 2-port 100GigE IMM – CFP ¬ 6.1 kg (13.4 lb)

7750 Service Router and 7450 Ethernet Service Switch Alcatel-Lucent Data sheet

4

• 1-port 100GigE IMM – CFP ¬ 6.1 kg (13.4 lb) • 6-port 40GigE IMM - QSFP+ ¬ 7.1 kg (15.6lbs) • 3-port 40GigE IMM - QSFP+ ¬ 7.1 kg (15.6lbs) • 1-port 40GigE IMM – Tunable DWDM ¬ 6.8 kg (15.0 lb) • 1-port OC-768c/STM-256c SONET/SDH IMM – Tunable DWDM

• 8-port 10GigE IMM – XFP ¬ 7.0 kg (15.5 lb) • 20-port 10GigE IMM – SFP+ ¬ 5.8 kg (12.8 lb) • 12-port 10GigE IMM – SFP+ ¬ 5.8 kg (12.8 lb) • 48-port GigE IMM – SFP ¬ 6.0 kg (13.2 lb) • 48-port 10/100/1000 Ethernet IMM – RJ-45 ¬ 6.0 kg (13.2 lb)

¬ 6.8 kg (15.0 lb) • 5-port 10GigE IMM – XFP ¬ 5.5 kg (12.2 lb)

Note: Weights and dimensions are approximate and subject to change. Refer to the appropriate Installation Guide for the current weights and dimensions.

10GBASE LAN and WAN PHY • LAN and WAN PHY support options for 10GigE cards

Network protocols

EMC immunity

• IPv4 unicast and multicast

• EN 300 386

• IPv6 unicast and multicast

• EN 55024

• MPLS

• IEC/EN 61000-4-2 ESD

Hardware queues

• Ethernet bridging

• IEC/EN 61000-4-3 Radiated Immunity

50 Gb/s FP2 IMMs

• Provider Backbone Bridging

• IEC/EN 61000-4-4 EFT

• Hierarchical service queues: 64,000 – available to all ports • Shapers: 64,000 (1 per queue) 100 Gb/s FP2 IMMs

• Hierarchical service queues: 64,000 ingress and 64,000 egress – available to all ports • Shapers: 128,000 (1 per queue) 100 Gb/s FP3 IMMs

• Hierarchical service queues: 128,000 – available to all ports • Shapers: 128,000 (1 per queue) 200 Gb/s FP3 IMMs

• IEC/EN 61000-4-5 Surge

Environmental specifications • Operating temperature: 5°C to 40°C (41°F to 104°F) • Operating altitude: Up to 4000 m (13,000 ft) at 30°C (86°F)

Optical DDM compliance • SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Transceivers

SyncE standards support • ITU-T 8261 – g.pactiming – timing and sync aspects in packet networks • ITU-T 8262 – g.paclock – timing characteristics of EEC

• Shapers: 128,000 (1 per queue)

• ITU-T 8263 – g.paclock.bis – for synchronous status messaging (SSM) (hardware-ready – requires future SR OS software release)

• 50 Gb/s FP2 IMMs – 1 million 2-tier policers • 100 Gb/s FP2 IMMs – 2 million 2-tier policers • 100 Gb/s FP3 IMMs – 2 million 2-tier policers • 200 Gb/s FP3 IMMs – 2 million 2-tier policers

MAC address capacity • 50 Gb/s FP2 IMMs – Up to 2 million 2-tier MAC FIB entries • 100 Gb/s FP2 IMMs – Up to 2 million 2-tier MAC FIB entriess • 100 Gb/s FP3 IMMs – Up to 4 million 2-tier MAC FIB entries • 200 Gb/s FP3 IMMs – Up to 4 million 2-tier MAC FIB entries

• ITU-T 8264 – g.pacmod – distribution of timing through packet networks

IP FIB capacity

• IEC/EN 61000-4-11 Voltage Interruptions

Telecom • Telcordia GR-253-CORE • IEEE 802.3 • IEEE 802.3ba

Environmental • ETS 300 019-1-1 Storage Tests, Class 1.2 • ETS 300 019-1-2 Transportation Tests, Class 2.3 • ETS 300 019-1-3 Operational Tests, Class 3.2 • ETS 300 019-2-4, pr A 1 Seismic • WEEE • RoHS • China CRoHS

Network Equipment Building System (NEBS) • NEBS Level 3 Compliant

Safety • EN 60950-1 2nd Ed CE-Mark

¬ Telcordia GR-1089-CORE ¬ Telcordia GR-63-CORE

• IEC 60950-1 2nd Ed CB Scheme

• Telcordia GR-295-CORE

• CSA/UL 60950-1 2nd Ed NRTL

• RBOC requirements

• FDA CDRH 21-CFR 1040

¬ ATT-TP-76200

• IEC/EN 60825-1

¬ ATT-TP-76200 section 13, TEER per ATIS-0600015.02

• IEC/EN 60825-2

EMC emission • ICES-003 Class A • FCC Part 15 Class A • EN 55022 Class A • CISPR 22 Class A • AS/NZS CISPR 22

• 50 Gb/s FP2 IMMs - Up to 3 million L3 FIB entries

• IEC/EN 61000-4-8 Magnetic Immunity

• Operating relative humidity: 5% to 85%

• Hierarchical service queues: 128,000 – available to all ports

Hardware policers

• IEC/EN 61000-4-6 Conducted Immunity

• VCCI Class A • BSMI Class A

• 100 Gb/s FP2 IMMs - Up to 3 million L3 FIB entries • 100 Gb/s FP3 IMMs - Up to 5 million L3 FIB entries • 200 Gb/s FP3 IMMs - Up to 5 million L3 FIB entries

www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2012 Alcatel-Lucent. All rights reserved. M2012083943 (August)

¬ VZ.TPR.9205 TEEER per ATIS-0600015.02 ¬ VZ.TPR.9305