NSE 4 6.4 Sample Questions - Attempt Review 2

25/3/2021 NSE 4 6.4 Sample Questions: Attempt review  NSE 4 FortiGate Security 6.4 and FortiGate Infrastructure 6.4 S

Views 3,534 Downloads 79 File size 638KB

Report DMCA / Copyright

DOWNLOAD FILE

Recommend stories

Citation preview

25/3/2021

NSE 4 6.4 Sample Questions: Attempt review

 NSE 4 FortiGate Security 6.4 and FortiGate Infrastructure 6.4 Sample Questions Started on Thursday, March 25, 2021, 4:16 PM State Finished Completed on Thursday, March 25, 2021, 5:55 PM Time taken 1 hour 39 mins Points 20/35 Grade 58 out of 100 Question 1

Which two statements about FortiGate antivirus databases are true? (Choose two.)

Incorrect 0 points out of 1

Select one or more: The extended database is available only if grayware scanning is enabled.  The quick scan database is part of the normal database. The extended database is available on all FortiGate models.  The extreme database is available only on certain FortiGate models.

Question 2

Examine the following log message attributes:

Incorrect

hostname=www.youtube.com profiletype=""Webfilter_Profile"" profile=""default"" status=""passthrough""msg=""URL

0 points out of 1

belongs to a category with warnings enabled""

Which two statements about the log are correct? (Choose two.)

Select one or more: The website was allowed on the first attempt.  The user failed authentication. The category action was set to warning. The user was prompted to decide whether to proceed or go back. 

Question 3

Which three settings and protocols can be used to provide secure and restrictive administrative access to FortiGate? (Choose three.)

Correct 1 points out of 1

Select one or more: SSH  FortiTelemetry Trusted authentication HTTPS  Trusted host 

Question 4 Correct 1 points out of 1

An administrator configured antivirus profile in a firewall policy set to flow-based inspection mode. While testing the configuration, the administrator noticed that eicar.com test files can be downloaded using HTTPS protocol only.   What is causing this issue? Select one: The test file is larger than the oversize limit. Hardware acceleration is in use. HTTPS protocol is not enabled under Inspected Protocols. Full-content inspection for HTTPS is disabled. 

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

1/10

25/3/2021

Question 5 Correct 1 points out of 1

NSE 4 6.4 Sample Questions: Attempt review

An administrator wants to monitor their network for any probing attempts aimed to exploit existing vulnerabilities in their servers.   What must they configure on their FortiGate to accomplish this? (Choose two.) Select one or more: A web application firewall profile to check protocol constraints An IPS sensor to monitor all signatures applicable to the server  A DoS policy, and log all UDP and TCP scan attempts  An application control profile and set all application signatures to monitor

Question 6

What does the command diagnose debug fsso-polling refresh-user do?

Incorrect 0 points out of 1

Select one: It displays status information and some statistics related to the polls done by FortiGate on each DC.  It enables agentless polling mode real-time debug. It refreshes user group information from any servers connected to FortiGate using a collector agent. It refreshes all users learned through agentless polling.

Question 7

Which two statements about antivirus scanning in a firewall policy set to proxy-based inspection mode are true? (Choose two.)

Correct 1 points out of 1

Select one or more: The client must wait for the antivirus scan to finish scanning before it receives the file.  If a virus is detected, a block replacement message is displayed immediately.  A file does not need to be buffered completely before it is moved to the antivirus engine for scanning. FortiGate sends a reset packet to the client if antivirus reports the file as infected.

Question 8

View the exhibit.

Incorrect 0 points out of 1

  Which two behaviors result from this full (deep) SSL configuration? (Choose two.) Select one or more: The browser bypasses all certificate warnings and allows the connection.  A temporary untrusted FortiGate certificate replaces the server certificate when the server certificate is untrusted. A temporary trusted FortiGate certificate replaces the server certificate when the server certificate is trusted.  A temporary trusted FortiGate certificate replaces the server certificate, even when the server certificate is untrusted.

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

2/10

25/3/2021

Question 9

NSE 4 6.4 Sample Questions: Attempt review

What is eXtended Authentication (XAuth)?

Correct 1 points out of 1

Select one: It is an IPsec extension that authenticates remote VPN peers using a preshared key. It is an IPsec extension that forces remote VPN users to authenticate using their local ID. It is an IPsec extension that forces remote VPN users to authenticate using their credentials (username and password).  It is an IPsec extension that authenticates remote VPN peers using digital certificates.

Question 10

Which two configuration settings are global settings? (Choose two.)

Correct 1 points out of 1

Select one or more: User & Device settings HA settings  FortiGuard settings  Firewall policies

Question 11

Which statement about firewall policy NAT is true?

Correct 1 points out of 1

Select one: DNAT is not supported. DNAT can automatically apply to multiple firewall policies, based on DNAT rules. SNAT can automatically apply to multiple firewall policies, based on SNAT policies. You must configure SNAT for each firewall policy. 

Question 12 Incorrect

View the exhibit. A user at 192.168.32.15 is trying to access the web server at 172.16.32.254.

0 points out of 1

Which two statements best describe how the FortiGate will perform reverse path forwarding (RPF) checks on this traffic? (Choose two.) Select one or more: Strict RPF check will allow the traffic.  Loose RPF check will allow the traffic. Loose RPF check will deny the traffic.  Strict RPF check will deny the traffic. https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

3/10

25/3/2021

Question 13

NSE 4 6.4 Sample Questions: Attempt review

Which two statements about advanced AD access mode for the FSSO collector agent are true? (Choose two.)

Correct 1 points out of 1

Select one or more: It is only supported if DC agents are deployed. FortiGate can act as an LDAP client to configure the group filters.  It supports monitoring of nested groups.  It uses the Windows convention for naming; that is, Domain\Username.

Question 14 Incorrect

What two settings must you configure when FortiGate is being deployed as a root FortiGate in a Security Fabric topology? (Choose two).

0 points out of 1

Select one or more: Pre-authorize downstream FortiGate devices FortiManager IP address  FortiAnalyzer IP address Fabric name 

Question 15

Which statement about the HA override setting in FortiGate HA clusters is true?

Correct 1 points out of 1

Select one: You must configure override settings manually and separately for each cluster member.  Configuring the HA override will reboot the FortiGate device. It synchronizes device priority on all cluster members. It is used to enable monitored ports.

Question 16

Which load balancing method is not supported in equal cost multipath (ECMP) load balancing, but is supported in SD-WAN?

Incorrect 0 points out of 1

Select one: Source-destination IP based Volume based Source IP based  Weight based

Question 17

Which statement about traffic flow in an active-active HA cluster is true?

Incorrect 0 points out of 1

Select one: The ACK from the client is received on the physical MAC address of the primary device.  The secondary device responds to the primary device with a SYN/ACK, and then the primary device forwards the SYN/ACK to the client. The SYN packet from the client always arrives at the primary device first. All FortiGate devices are assigned the same virtual MAC addresses for the HA heartbeat interfaces to redistribute to the sessions.

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

4/10

25/3/2021

Question 18 Correct 1 points out of 1

NSE 4 6.4 Sample Questions: Attempt review

Examine the exhibit, which shows a FortiGate device with two VDOMs: VDOM1 and VDOM2.   Both VDOMs are operating in NAT/route mode. The subnet 10.0.1.0/24 is connected to VDOM1. The subnet 10.0.2.0/24 is connected to VDOM2. There is an inter-VDOM link between VDOM1 and VDOM2.

What is required in the FortiGate configuration to route traffic between both subnets through an inter-VDOM link? Select one: A static route in VDOM2 with the destination subnet matching the subnet assigned to the inter-VDOM link A static route in VDOM2 for the destination subnet 10.0.1.0/24  A firewall policy in VDOM1 to allow the traffic from 10.0.1.0/24 to 10.0.2.0/24 with port1 as the source interface and port2 as the destination interface A static route in VDOM1 for the destination subnet of 10.0.1.0/24

Question 19

Which three protocols can a client use to authenticate against a FortiGate configured as transparent web proxy? (Choose three.)

Partially correct 0 points out of 1

Select one or more: SOCKS5  FTP SMTP  HTTP  SSH

Question 20 Correct

Which three methods can be used to deliver the token code to a user who is configured to use two-factor authentication? (Choose three.)

1 points out of 1

Select one or more: FortiToken  Voicemail message Email  SMS text message  Instant message app

Question 21

Which two statements correctly describe the differences between IPsec main mode and IPsec aggressive mode? (Choose two.)

Correct 1 points out of 1

Select one or more: The first packet of aggressive mode contains the peer ID, while the first packet of main mode does not.  Six packets are usually exchanged during main mode, while only three packets are exchanged during aggressive mode.  Main mode cannot be used for dialup VPNs, while aggressive mode can. Aggressive mode supports XAuth, while main mode does not.

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

5/10

25/3/2021

Question 22

gg

pp

NSE 4 6.4 Sample Questions: Attempt review

,

Examine the exhibit showing a routing table.

Correct 1 points out of 1

Which route will be selected when trying to reach 10.20.30.254? Select one: 10.20.30.0/24 [10/0] via 172.20.167.254, port3



10.20.30.0/26 [10/0] via 172.20.168.254, port2 0.0.0.0/0 [10/0] via 172.20.121.2, port1 10.30.20.0/24 [10/0] via 172.20.121.2, port1

Question 23

Which three actions are valid for static URL filtering? (Choose three.)

Correct 1 points out of 1

Select one or more: Block  Shape Warning Allow  Exempt 

Question 24 Incorrect 0 points out of 1

An administrator needs to create a tunnel mode SSL-VPN to access an internal web server from the Internet. The web server is connected to port1. The Internet is connected to port2. Both interfaces belong to the VDOM named Corporation.   What interface must be used as the source for the firewall policy that will allow this traffic? Select one: ssl.Corporation port1 ssl.root



port2

Question 25 Incorrect 0 points out of 1

Examine this partial output from the diagnose sys session list CLI command: diagnose sys session list session info: proto=6 proto_state=05 duration=2 expire=78 timeout=3600 flags=00000000 sockflag=00000000 sockport=0 av_idx=0 use=3 What does this output state? Select one: proto_state=05 means there is only one-way traffic. proto_state=05 is the UDP state.



proto_state=05 is the TCP state. proto_state=05 is the ICMP state.

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

6/10

25/3/2021

NSE 4 6.4 Sample Questions: Attempt review

Question 26

Examine this FortiGate configuration:

Incorrect

config system global

0 points out of 1

set av-failopen pass end config ips global set fail-open disable end

Examine the output of the following debug command: # diagnose hardware sysinfo conserve memory conserve mode: on total RAM: 3040 MB memory used: 2706 MB 89% of total RAM memory freeable: 334 MB 11% of total RAM memory used + freeable threshold extreme: 2887 MB 95% of total RAM memory used threshold red: 2675 MB 88% of total RAM memory used threshold green: 2492 MB 82% of total RAM

Based on the diagnostic outputs above, how is the FortiGate handling packets that require IPS inspection? Select one: They are dropped. They are allowed and inspected. They are allowed and inspected as long as no additional proxy-based inspection is required. They are allowed, but with no inspection. 

Question 27

Examine the exhibit, which shows a firewall policy configured with multiple security profiles.

Correct 1 points out of 1

Which two security profiles will be handled by the IPS engine? (Choose two.) Select one or more: Application Control  AntiVirus IPS  Web Filter

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

7/10

25/3/2021

Question 28

NSE 4 6.4 Sample Questions: Attempt review

Examine the exhibit:

Incorrect 0 points out of 1

  A client workstation is connected to FortiGate port2. The FortiGate port1 is connected to an ISP router. port2 and port3 are both configured as a software switch.   Which IP address must be configured on the workstation as the default gateway? Select one: The FortiGate management IP address The router IP address The software switch interface IP address The port2 IP address 

Question 29

Which two statements about incoming and outgoing interfaces in firewall policies are true? (Choose two.)

Correct 1 points out of 1

Select one or more: Multiple interfaces can be selected as incoming and outgoing interfaces.  Only the any interface can be chosen as an incoming interface. A zone can be chosen as the outgoing interface.  An incoming interface is mandatory in a firewall policy, but an outgoing interface is optional.

Question 30

View the exhibit.

Incorrect 0 points out of 1

Which statement about the configuration settings is true? Select one: When a remote user accesses https://10.200.1.1:443, the FortiGate login page opens.  When a remote user accesses https://10.200.1.1:443, the SSL-VPN login page opens. The settings are invalid. The administrator settings and the SSL-VPN settings cannot use the same port. h h https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

h

l

8/10

25/3/2021

NSE 4 6.4 Sample Questions: Attempt review

When a remote user accesses http://10.200.1.1:443, the SSL-VPN login page opens.

Question 31

Which two statements about the application control profile mode are true? (Choose two.)

Incorrect 0 points out of 1

Select one or more: It can be selected in either flow-based or proxy-based firewall policy.  It uses flow-based scanning techniques, regardless of the inspection mode used. It can scan only unsecure protocols.  It cannot be used in conjunction with IPS scanning.

Question 32

Which two statements regarding the SD-WAN feature on FortiGate are true? (Choose two.)

Correct 1 points out of 1

Select one or more: FortiGate supports only one SD-WAN interface per VDOM.  Each member interface requires its own firewall policy to allow traffic. An SD-WAN static route does not require a next-hop gateway IP address.  SD-WAN provides route failover protection, but cannot load-balance traffic.

Question 33

View the exhibit.

Correct 1 points out of 1

  What does this raw log indicate? (Choose two.) Select one or more: Traffic matches the application profile on firewall policy ID 1  FortiGate allowed the traffic to pass  10.0.1.10 is the IP address for *.cdn.mozilla.net

Traffic originated from 13.32.69.150

Question 34

How can you configure the web proxy to block HTTP packets that request a specific HTTP method?

Correct 1 points out of 1

Select one: Create a proxy address that matches the HTTP method, and apply it to a proxy policy with the action DENY.  Create a DNS filter that matches the HTTP method, and apply it to a proxy policy with the action DENY. Create a firewall service that matches the HTTP method, and apply it to a proxy policy with the action DENY. Apply a web filter profile to a proxy policy that blocks the HTTP method.

Question 35 Correct 1 points out of 1

FortiGate has been configured for Firewall Authentication. When attempting to access an external website, the user is not presented with a login prompt.   What is the most likely reason for this situation? Select one: The user is using a guest account profile. The user was authenticated using passive authentication.  No matching user account exists for this user. The user is using a super admin account.

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

9/10

25/3/2021

https://training.fortinet.com/mod/quiz/review.php?attempt=6700108&cmid=67573

NSE 4 6.4 Sample Questions: Attempt review

10/10