• Author / Uploaded
• pankituna5487

Citation preview

JCB 214e Series 4 BACKHOE LOADER F

A

S

.

T

F

A

C

T

S

Heavy-duty mainframe:

Operator platform:

Hydraulics:

Unitized, one piece mainframe and massive rear frame supports. Large diameter pins and bushings for long life. Grease seals at critical backhoe joints.

Choice of open canopy or enclosed cab. Both feature full floor mat, complete lighting package, heavy duty seat, ergonomically designed controls and side-mounted instrument panel with audible/visual warning system.

Simple, effective gear pump provides maximum flow and pressure. JCB cylinders connected by million cycle hoses and structural steel hydraulic lines.

Powertrain: Heavy-duty, 72 net HP diesel engine with cast iron sump for protection. JCB designed and built synchro shuttle transmission and axles. Limited slip rear axle traction control. Available in 2WD or 4WD configuration.

Loader: Exceptional 6,750 lb. lift capacity and 11,730 lb. breakout force, coupled with 1.25 cu.yd. bucket, provide outstanding productivity. Available with GP or 6 in 1 bucket.

Serviceability: Ground level service checks and regular maintenance.

Backhoe: Heavy duty 14-foot class backhoe available in standard dipper or exclusive JCB Extradig dipper version. Outstanding power and performance.

Safety and security: Single key operates locks for fuel, hydraulics, cab, engine, vandal cover and ignition. ROPS and FOPS operator protection. Turn signals, brake lights, hazard flashers.

C

E

F J A

SPECIFICATION

214e Series 4 BACKHOE LOADER STATIC DIMENSIONS

B C

E

F J

G&H

D

A

STATIC DIMENSIONS

ENGINE

JCB Series 4 Backhoe Loaders feature heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key. Machine model 214e-2WD 214e-4WD ft-in ft-in (meter) (meter) A Transport 23-0 23-0 length (7.01) (7.01) B Transport height – 11-2 11-2 Standard backhoe (3.40) (3.40) C Height to top of 9-3 9-3 cab/canopy (2.82) (2.82) D Overall width 7-4 7-4 with bucket (2.24) (2.24) E Ground clearance – 1-2 1-2 mainframe (0.36) (0.36) F Ground clearance – 1-2 0-10 front axle (0.36) (0.25) G Front wheel 5-11 6-1 track (1.80) (1.85) H Rear wheel 5-5 5-8 track (1.65) (1.73) 6-11 7-1 J Wheelbase (2.11) (2.16)

Four cylinder, direct injection diesel. Gear driven water pump, cast iron engine sump, spin-on oil and fuel filters, fuel/water separator, dual element air cleaner, 21” fan. Parent bore engine block, Thermostart cold start aid. Machine model 214e-2WD 214e-4WD Manufacturer Perkins 1000 Series 259 cubic inches Displacement (4.25 liters) Aspiration Natural Natural Rated Engine RPM 2200 2200 Horsepower HP HP Ratings: (kW) (kW) 76 76 SAE Gross (56.7) (56.7) 72 72 SAE Net (53.7) (53.7) Maximum lb-ft lb-ft Torque: (Nm) (Nm) 214 214 SAE Gross (291) (291) 210 210 SAE Net (286) (286) Max. Torque RPM 1400 1400

STEERING OPERATING WEIGHTS Operating weight includes machine equipped with standard loader bucket, 24" HD backhoe bucket and full fluid levels. Machine model 214e-2WD 214e 4WD lb lb (kg) (kg) Base unit – 13046 13376 std backhoe (5919) (6069) Cab, Extradig 14368 14698 (6519) (6669) Add for: 176 176 SAE operator (80) (80)

Power hydrostatic system utilizing the main hydraulic pump via a steering priority valve. Emergency power off steering. Machine model 214e-2WD 214e-4WD Steering axles Front Front Type Hydrostatic Steering turns – lock to lock 3.00 3.00 ft-in ft-in (meter) (meter) Turning circle – 25-3 26-5 unbraked (7.70) (8.05) Loader clearance 33-10 34-11 circle (10.31) (10.64)

214e Series 4 BACKHOE LOADER ENGINE SUPPORT SYSTEM

FRONT AXLE

Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals. Fuel type Diesel. Fuel filter Replaceable spin-on cartridge plus water/sediment separator Air cleaner Dual, dry element cyclonic type. Oil filter and lubrication Full flow, spin on type filter. Cooling system Hot climate specification, pressurized to 7 psi (0.5 bar), 21” suction fan. Pressurized recovery tank with integral filler neck.

JCB front axles are designed and built specifically for backhoe loaders and accept a variety of tire combinations. Machine model 214e-2WD 214e-4WD JCB MaxFlame Trac Type cut bar Torque w/fixed proportread tioning lb lb (kg) (kg) Static load 36383 36383 rating (16508) (16508) Dynamic load 18300 18300 rating (8303) (8303) SAE J43 11362 13440 Rating (5155) (6098)

ELECTRICAL & INSTRUMENTATION 12 volt negative ground, utilizing wiring and connectors meeting IP67 water and dust ingress test standard. Central fuse panel supplemented with main circuit breakers at battery positive terminal. Gauges Tachometer, engine coolant temp, fuel level, hourmeter. Warning system Audible and visual system for engine, transmission, park brake, battery charge condition, air cleaner restriction. Battery 12V, 850 cold cranking amps. Pre-wire Pre-wire for beacon. Horn Front horn button mounted on forward-toreverse lever. Accessory 12V power outlet on instrument panel. Reverse alarm Standard fit. Meets SAE requirements.

TRANSMISSION JCB transmissions are designed and built specifically for JCB backhoe loaders. They feature synchronized shifting in all gears and power shift between forward and reverse. Ground speeds are designed to maximize production. Transmission disconnect switches on main gear shift lever and loader control lever. 214e-2WD 214e-4WD Machine model Manufacturer JCB Type Synchro shuttle Torque Single stage, dual phase, converter 11 inch diameter Torque converter ratio 2.8:1 2.8:1 Gears forward/reverse 4 forward/4 reverse Gear Synchro Synchro selection shift shift Shuttle control – Power Power F/R shuttle shuttle Travel mph mph speeds (kph) (kph) Tires equipped 19.5L-24 19.5L-24 3.4 3.4 Gear 1 (5.5) (5.5) 5.1 5.1 Gear 2 (8.2) (8.2) 10.9 10.9 Gear 3 (17.5) (17.5) 20.6 20.6 Gear 4 (33.2) (33.2)

REAR AXLE JCB rear axles are designed and built specifically for backhoe loaders and accept a variety of tire combinations. Machine model 214e-2WD 214e-4WD JCB Max-Trac Type with outboard planetary drive Standard automatic Limited slip rear axle traction control system lb lb (kg) (kg) Static load 55125 55125 rating (25011) (25011) Dynamic load 27562 27562 rating (12505) (12505) SAE J43 12956 12956 Rating (5878) (5878)

OPERATOR’S AREA Meets SAE ROPS/FOPS requirements 17632lb (8000kg) GVW capacity. Standard features include the following: Cab Canopy Heavy duty suspension seat opt opt Heavy duty fixed pedestal seat X X Heater/pressurizer X Front and rear wipers X Front and rear window washers X 2" seat belt (3" option) X X 4 front and 2 rear work lamps X X 12V power outlet X X Instrument vandal cover X Brake lights, hazard lamps, turn signals X X Interior rear view mirror X X Side-mounted instrument panel X X Deluxe floor mat X X Cup holder X X

214e Series 4 BACKHOE LOADER LOADER DIMENSIONS

Q

V M

O

P

N

R

T

LOADER DIMENSIONS Machine model

M N O P Q R T V

Overall width with bucket Dump height Load over height Loader hinge pin height Maximum operating height Dump reach at full height Rollback @ ground – degrees Digging depth Dump angle – degrees

MULTI-PURPOSE LOADER – 6-in-1 Bucket

214e-2WD 214e-4WD ft-in ft-in (meter) (meter) 7-4 7-4 (2.24) (2.24) 8-10 8-10 (2.69) (2.69) 10-6 10-6 (3.20) (3.20) 11-1 11-1 (3.38) (3.38) 13-4 13-4 (4.06) (4.06) 2-8 2-8 (0.81) (0.81) 41°

41°

0-5 (0.13)

0-5 (0.13)

42°

42°

STANDARD LOADER – General Purpose Bucket JCB loaders provide high-capacity buckets with high lift and breakout forces for maximum productivity. Load retention system provides bucket roll-out on the lift cycle for maximum load retention. Two spool valve is standard. Machine model 214e-2WD 214e4WD lb lb (kg) (kg) Bucket 11730 11730 breakout force 5322 5322 Lift capacity 6750 6750 to full height 3063 3063

JCB multi-purpose loaders feature a 6-in-1 bucket, three-spool loader valve, dual lever loader control and loader pipework. Machine model 214e-2WD 214e-4WD lb lb (kg) (kg) Bucket 12100 12100 breakout force 5490 5490 Lift capacity 6200 6200 to full height 2813 2813

LOADER ATTACHMENTS – Direct Mount JCB backhoe loaders utilize heavy-duty, high-capacity loader buckets. All buckets feature a drilled cutting edge to accept a bolt-on cutting edge or teeth. Flat top section provides rigidity and bucket sight level indicator. Machine model 214e-2WD 214e-4WD lb lb (kg) (kg) GP bucket – 794 794 88", 1.25cu.yd. (360) (360) HD bucket – 970 970 88", 1.25cu.yd. (440) (440) 6-in-1 bucket – 1540 1540 88", 1.25cu.yd. (699) (699)

214e Series 4 BACKHOE LOADER BRAKES Hydraulically actuated, self-adjusting, oil immersed, inboard, multi-plate type. Separate master cylinder and brake oil reservoir. Independent disk and caliper type parking brake mounted on rear of transmission. 214e – Two pedal service brakes with interlock 2WD and 4WD for individual or simultaneous operation.

TIRES Tires listed are most popular sizes. See your JCB dealer for a full listing of available tire sizes and tread patterns. Machine model 214e-2WD 214e-4WD 11L-16, F3, 12 ply – front Standard 17.5L-24, R4 10 ply – rear Standard 19.5L-24, R4, 10 ply – rear Optional 12-16.5, FWD, 10 ply – front Standard 17.5L-24, R4, 10 ply – rear Standard 19.5L-24, R4, 10 ply – rear Optional

SERVICE CAPACITIES Machine model

Cooling system Fuel tank Engine oil with filter Synchro shuttle trans w/filter Rear axle Front drive axle Drive axle hubs – each Hydraulic tank Hydraulic system incl. tank

214e-2WD 214e-4WD gal gal (liter) (liter) 6.1 6.1 (23) (23) 34.4 34.4 (130) (130) 2.6 2.6 (10) (10) 4.8 4.8 (18) (18) 4.2 4.2 (16) (16) 4.2 NA (16) 0.4 0.4 (2) (2) 19.8 19.8 (75) (75) 30.4 30.4 (115) (115)

HYDRAULIC SYSTEM Open center system incorporating a single gear pump which supplies oil for loader, backhoe and steering systems. Side mounted hydraulic tank with sight glass and lockable cap. JCB cylinders, million cycle hydraulic hoses with abrasion protection. Structural steel tubing to resist impact. Machine model 214e-2WD 214e-4WD gpm gpm (lpm) (lpm) Pump 29 29 output (110) (110) psi psi (bar) (bar) System relief 3300 3300 pressure (228) (228) Filter rating 10 micron

214e Series 4 BACKHOE LOADER BACKHOE BUCKETS JCB backhoe buckets are designed specifically for use on JCB machines. Dual position tipping link provides positions to maximize tearout force or to maximize rotation for straight wall digging and improved load retention. All JCB buckets include heavy-duty features consisting of a 1”x8” cutting edge, back straps, box section cross member, and full length, chamfered side cutters. Bucket width - in. 12 18 24 24 30 36 Bucket width – mm 305 455 610 610 760 910 Number of teeth 3 4 4 5 5 6 Heavy Duty Trenching Buckets Capacity – cu.ft. 2.8 4.9 7.1 7.1 9.2 11.3 Capacity – cu.m 0.08 0.14 0.20 0.20 0.26 0.32 Weight – lbs 293 359 408 419 478 544 Weight –kg 133 163 185 190 217 247 See your JCB dealer for availability of other backhoe buckets and attachments.

BACKHOE DIMENSIONS – 214e 2WD & 4WD

A SAE dig depth – Max. A SAE dig depth – 2' flat bottom B Reach from swing pivot C Reach from rear axle center D Maximum operating height E Loading height F Loading reach Swing arc – degrees Stabilizers – transport Stabilizers – operating Leveling angle – degrees Bucket rotation – degrees

F D E

B C A

standard Extradig – Extradig – backhoe retracted extended ft-in ft-in ft-in (meter) (meter) (meter) 14-4 14-7 18-0 (4.37) (4.45) (5.49) 14-3 14-6 17-10 (4.34) (4.42) (5.44) 17-7 17-10 21-0 (5.36) (5.44) (6.40) 21-6 21-10 25-0 (6.55) (6.65) (7.62) 17-7 17-8 20-0 (5.36) (5.38) (6.10) 10-4 10-6 11-10 (3.15) (3.20) (3.61) 5-8 5-8 9-1 (1.73) (1.73) (2.77) 180° 180° 180° 7-2 7-2 7-2 (2.18) (2.18) (2.18) 10-6 10-6 10-6 (3.20) (3.20) (3.20) 15° 15° 15° 185°max. power/ 201°max. rotation

214e Series 4 BACKHOE LOADER BACKHOE PERFORMANCE

20

6

18 5

16 14

4 12 10

3

8 2

6 4

1

2 0

0

2 1

4 6

2

8 3

10 Swing Pivot

12 4 14 16

5

18 6

0

1

6

8 2

10 12 14 16 18 20 22 24 3

4

5

6

7

Fe et

4

8

ter

2

s

20 0

Me

standard Extradig – Extradig – backhoe retracted extended lb lb lb (kg) (kg) (kg) Bucket 11470 11470 11470 force (5204) (5204) (5204) Dipper 7000 6565 4810 force (3176) (2979) (2182) Dipper Lift Capacity – SAE J31 6615 4680 3195 +4 feet (3001) (2123) (1450) 5405 3970 2460 +6 feet (2452) (1801) (1116) 4945 3710 2540 +8 feet (2244) (1683) (1152) 4200 3690 2240 +10 feet (1906) (1674) (1016) 2970 3450 1745 +12 feet (1348) (1565) (792) Boom Lift Capacity – SAE J31 3155 2630 1420 +12 feet (1431) (1193) (644) 2665 2280 1280 +8 feet (1209) (1034) (581) 2640 2180 1275 +4 feet (1198) (989) (578) Ground 2735 1950 1390 level (1241) (885) (631) 2555 1770 1675 – 4 feet (1159) (803) (760) 2420 1610 1800 – 8 feet (1098) (730) (817) 2430 1430 1810 – 10 feet (1103) (649) (821)

22

Lift capacity figures comply with SAE J31. All figures are stated in pounds (kilograms). The large arc indicates boom lift. The small arc indicates dipper lift with the boom at 63 degrees. Units are equipped with standard equipment as listed in this data sheet and a 24" backhoe bucket.

JCB HYDRAULIC BREAKERS JCB hydraulic breakers are designed for use on JCB backhoes. They feature constant blow energy, pressure damping, heavyduty side plates and high impact frequency for maximum production. Coupled with a factory installed hydraulic breaker circuit, the JCB breakers and backhoe loader make a perfect demolition combination. Model 360Q is equipped with sound insulation for quiet operation. Breaker model 260 360 360Q Energy class – ft./lb 500 750 750 Impact frequency – bpm 400-2000 600-1800 600-1800 Oil flow range – gpm 6.6-26 13-40 13-40 (lpm) (25-100) (50-150) (50-150) Operating weight – lb 573 891 921 (kg) (260) (405) (418) Operating pressure – psi 1450-2100 (bar) (100-145) Total diameter – in. 2.48 2.75 2.75 (mm) (63) (70) (70) A wide variety of tools are available for JCB breakers. See your JCB dealer.

THE BEST BACK- UP IN THE BUSINESS. ALWAYS FINDING A BETTER WAY.

Buy any of the JCB backhoe loader models and you’ll get a complete deal that extends beyond that of any rival.

FINANCE. Your JCB dealer can meet your financial needs through a variety of plans for leasing, lease purchases with or without options, installment sales contracts and rental programs.

WARRANTY. JCB backhoe loaders are covered by JCB’s one year standard warranty, which is outlined in the JCB ‘Certificate of Warranty’. Extended warranty coverage is also available. Contact your JCB dealer for details.

SERVICE. JCB dealer service people are committed to keeping your JCB up and running. JCB dealer mechanics are enrolled in on-going training programs and supported by experienced JCB service representatives based throughout North America.

PARTS. JCB dealers’ convenient locations offer excellent ‘over the counter’ parts availability. JCB also offers:

48 HOUR PARTS GUARANTEE. Ask your dealer for details – JCB offers its participating dealers a guarantee that breakdown parts will be available at the dealership within 48 hours or the parts and freight will be free.

REGIONAL PARTS DEPOTS. For the breakdown part your dealer may not have in stock, JCB has SDD ‘Same Day Dispatch,’ from a parts distribution center in the United States and one in Canada.

See your JCB Dealer Sales Rentals Financing Parts Service ●

●

●

●

JCB Inc, 10939 Philadephia Road, PO Box 209, White Marsh, MD 21162-0209 (410) 335-2800. JCB Excavators Ltd, 3375 North Service Road, Unit C6, Burlington, Ontario, L7N 3G2 (905) 335-3441. JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada.

USA 3336-20K 2/98