• Author / Uploaded
• Karol Marinho

• Categories
• Ocio

Citation preview

Magic Book Deck Box Assembly Instructions IMPORTANT! For best results print Deck Box pieces on 110pd cardstock. Print colors.pdf on any standard printing paper.

None of these instructions or any of the pieces of this Deck Box can be reproduced, modified, or sold without the express permission of Matthew Milam and Firebrand Creations. Magic: The Gathering is the trademark of Wizards of the Coast and is in no way affiliated with Firebrand Creation. All copyrights remain the property of their original owners.

Magic Book Deck Box Assembly Instructions – Piece 1

Prep steps: 1. Print Piece 1 on 110 pd cardstock. Make sure Page Scaling is set to None. 2. Cut out along outer edges. 3. Pre crease inner edges with the tip of a mechanical pencil. Consult reference above for crease lines.

Step 1: Glue the White backs of sides L and M Together. Fold side O and side C so that they make a 90 degree angle with sides L and M. Repeat this Process for sides I and H.

Step 2: Fold side D up so that it makes a Square with side L/M and side H/I from step 1. Glue the white backs of tabs N and J to the White back of side D.

Step 3: Glue the White back of side E to the white back of side D. This should also cover the flaps J and N from the previous Step.

Step 4: Glue the white back of side G to the White back of side C. The White backs of sides F, O and K should meet up with the edges of side G to make the book edge effect.

This Piece is Complete. Now Move on to Piece 2

Magic Book Deck Box Assembly Instructions – Piece 2

Prep steps: 4. Print Piece 2 on 110 pd cardstock. Make sure Page Scaling is set to None. 5. Cut out along outer edges. 6. Pre crease inner edges with the tip of a mechanical pencil. Consult reference above for crease lines.

Step 1: Glue the White backs of sides N and O Together. Fold side R and side C so that they make a 90 degree angle with sides N and O. Repeat this Process for side s J and I.

Step 2: Fold side D up so that it makes a Square with sides N/O and sides I/J from step 1. Glue the white backs of tabs P and K to the White back of side D.

Step 3: Fold side B up so that it makes a Square with sides N/O and sides I/J from step 1. Glue the white backs of tabs Q and L to the White back of side B.

Step 4: Glue the White back of side E to the white back of side D. This should also cover the flaps K and P from the previous Step.

Step 5: Glue the white back of side G to the White back of side C. The White backs of sides F, R and M should meet up with the edges of side G to make the book edge effect.

This Piece is Complete. Now you will need to glue the two pieces together.

Magic Book Deck Box Assembly Instructions – Final Assembly

Step 1: Glue the white back of side B from piece 1 with the white back of side H from piece 2. Make sure the two pieces come together to complete the spine of the book.

Step 2: Glue the white back of side A from piece 1 to the white back of Side B from piece 2.

Step 3 Optional: If you want to show what colors your deck contains, you can glue one of the color rectangles from colors.pdf onto the spine of the box. Print the Color rectangles on standard printing paper. The rectangle should go between the 1st and 2nd topmost spines.

Congratulations you now have your own magic book deck box! To close the box, insert the flaps from Piece1 inside of the flaps of Piece two. You can curve side B/H with your fingers to give the book a more natural look.