IEEE Power, Switchgear, Substations & Relays Standards
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™ IEEE Power, Switchgear, Substations & Relays
Views 168 Downloads 0 File size 249KB
Recommend stories
- Author / Uploaded
- Wan Mohd Hafiz
Citation preview
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™ Summary This new comprehensive collection represents the most complete resource available for professional engineers looking for best practices and techniques covering design, construction and operation of devices or assembled gear to establish, interrupt, or change connections in any electric circuit under normal or abnormal conditions and active standards covering switching stations, transformer stations, generating station switchyards and is a single source for design construction and operation of power substations. This collection includes items used in the operation of relays and relaying systems in the transmission, generation, distribution and utilization of electrical energy and their effect on system operation and focus the application, design, construction and operation of protective, regulating, monitoring, reclosing, synch-check, synchronizing and auxiliary relays. This powerful collection contains over 184 IEEE Standards, Guides, and Recommended Practices, including Errata & Interpretations on Power Switchgear, Circuit Breaker, Fuse, Substation, and Power Systems Relay, include 89 Switchgear standards, 50 Substation standards, 45 Relaying standards. Also included are select historic ANSI/NEMA standards, key reference standards, and exclusive linked abstracts, keywords, and extended standard descriptions and an online glossary of over 1,400 terms derived from the official standards.
Table of Contents Includes 184 active IEEE Standards, Guides, and Recommended Practices, Errata & Interpretations. Contents for Power Substations: •
IEEE 80™-2000, IEEE Guide for Safety in AC Substation Grounding
•
Errata to IEEE 80™-2000, IEEE Guide for Safety in AC Substation Grounding
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE Standards Interpretation for IEEE 80™-1986 IEEE Guide for Safety in AC Substation Grounding
•
IEEE Standards Interpretation for IEEE 80™-2000 IEEE Guide for Safety in AC Substation Grounding
•
IEEE 81™-2012, IEEE Guide For Measuring Earth Resistivity, Ground Impedance, And Earth Surface Potentials Of a Ground System
•
IEEE 525™-2007, IEEE Guide for the Design and Installation of Cable Systems in Substations
•
IEEE 605™-2008, IEEE Guide for Design of substation Rigid-Bus Structures
•
Correction to IEEE 605™-1998, IEEE Guide for Design of substation RigidBus Structures
•
IEEE Standards Interpretation for IEEE 605™-1998, IEEE Guide for Design of substation Rigid-Bus Structures
•
IEEE Standards Interpretation for IEEE 605™-2008 IEEE Guide for Bus Design in Air Insulated Substations
•
IEEE 693™-2005, IEEE Recommended Practice for Seismic Design of Substations.
•
IEEE 837™-2002, IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding
•
IEEE 979™-2012, IEEE Guide for Substation Fire Protection (Pub 11/7/2012)
•
IEEE 980™-1994 (R2001), IEEE Guide for Containment and Control of Oil Spills in Substations
•
IEEE Standards Interpretation for IEEE 980™-1994 IEEE Guide for Containment and Control of Oil Spills in Substations
•
IEEE 998™-2012, IEEE Guide for Direct Lightning Stroke Shielding of Substations
•
IEEE 1031™-2011, IEEE Guide for the Functional Specification of Transmission Static Var Compensators
•
Errata to IEEE 1031™-2011, IEEE Guide for the Functional Specification of Transmission Static Var Compensators
•
IEEE 1125™-1993 (R2005), IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
•
IEEE 1127™-1998 (R2004), IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility
Page | 2
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE 1240™-2000 (R2012), IEEE Guide for the Evaluation of the Reliability of HVDC Converter Stations
•
IEEE 1246™-2011, IEEE Guide for Temporary Protective Grounding Systems Used in Substations
•
IEEE 1264™-1993 (R2009), IEEE Guide for Animal Deterrents for Electric Power Supply Substations
•
IEEE 1267™-1999 (R2005), IEEE Guide for Development of Specification for Turnkey Substation Projects
•
IEEE 1268™-2005, IEEE Guide for Safety in the Installation of Mobile Substation Equipment
•
IEEE 1303™-2011, IEEE Guide for Static var Compensator Field Tests
•
IEEE 1378™-1997 (R2002), IEEE Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations and Associated Transmission Systems
•
IEEE 1379™-2000 (R2006), IEEE Recommended Practice for Data Communications Between Remote Terminal Units and Intelligent Electronic Devices in a Substation
•
IEEE 1402™-2000 (R2008), IEEE Guide for Electric Power Substation Physical and Electronic Security
•
IEEE 1416™-1998 (R2004), IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated substations
•
IEEE 1427™-2006, IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air-Insulated Electrical Power Substations
•
IEEE 1527™-2006, IEEE Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas
•
IEEE 1534™-2009, IEEE Recommended Practice for Specifying ThyristorControlled Series Capacitors
•
IEEE 1585™-2002 (R2007), IEEE Guide for the Functional Specification of Medium Voltage (1 - 35 kV) Electronic Series Devices for Compensation of Voltage Fluctuations
•
IEEE 1613™-2009, IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations
Page | 3
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE Standards Interpretation for IEEE 1613™-2003 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations
•
IEEE Standards Interpretations for IEEE 1613™-2009 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations
•
IEEE 1615™-2007, IEEE Recommended Practice for Network Communication in Electric Power Substations
•
IEEE 1623™-2004 (R2010), IEEE Guide for the Functional Specification of Medium Voltage (1 kV…35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
•
IEEE 1646™-2004 IEEE Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation
•
IEEE 1686™-2007, IEEE Standard for Substation Intelligent Electronic Devices (IEDs) Cyber Security Capabilities
•
IEEE 1815™-2012, IEEE Standard for Electric Power Systems Communications-Distributed Network Protocol (DNP3)
•
IEEE C37.1™-2007, IEEE Standard for SCADA and Automation Systems
•
IEEE C37.2™-2008, IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations
•
IEEE C37.122™-2010, IEEE Standard for Gas-Insulated Substations
•
Errata to IEEE C37.122™-2010, IEEE Standard for Gas-Insulated Substations
•
IEEE C37.122.1™-1993 (R2008), IEEE Guide for Gas-Insulated Substations
•
IEEE C37.122.2™-2011 - IEEE Guide for the Application of Gas-Insulated Substations 1 kV to 52 kV
•
IEEE C37.122.3™-2011 - IEEE Guide for Sulphur Hexafluoride (SF6) Gas Handling for High-Voltage (over 1000 Vac) Equipment
•
IEEE C37.123™-1996 (R2008), IEEE Guide to Specifications for GasInsulated, Electric Power Substation Equipment
Contents for Power Systems Relaying •
IEEE C37.2™-2008, IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations
Page | 4
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.2™-1996, Errata to IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations
•
IEEE C37.90™-2005 (R2011), IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
•
IEEE C37.90.1™-2012, IEEE Draft Standard Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
•
IEEE C37.90.1™-2002, Errata to IEEE Draft Standard Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
•
IEEE C37.90.2™-2004 (R2010), IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
•
IEEE C37.90.3™-2001 (R2012), IEEE Standard Electrostatic Discharge Tests for Protective Relays
•
IEEE C37.91™-2008 (Revision of IEEE C37.91™-2000), IEEE Guide for Protective Relay Applications to Power Transformers
•
IEEE C37.92™-2005 (R2011), IEEE Standard for Analog Inputs to Protective Relays from Electronic Voltage and Current Transducers
•
IEEE C37.93™-2004 (R2010), IEEE Guide for Power System Protective Relay Applications of Audio Tones Over Voice Grade Channels
•
IEEE C37.94™-2002 (R2008), IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment
•
IEEE C37.95™-2002 (R2007), IEEE Guide for Protective Relaying of UtilityConsumer Interconnections
•
IEEE C37.96™-2000 (R2006), IEEE Guide for AC Motor Protection
•
IEEE C37.99™-2000 (R2006)(Revision of IEEE C37.99™-1990), IEEE Guide for the Protection of Shunt Capacitor Banks
•
IEEE C37.101™-2006 (R2011), IEEE Guide for Generator Ground Protection
•
IEEE C37.102™-2006, IEEE Guide for AC Generator Protection
•
IEEE C37.103™-2004 (R2010), IEEE Guide for Differential and Polarizing Relay Circuit Testing
•
IEEE C37.104™-2012, IEEE Guide for Automatic Reclosing of Circuit Breakers for AC Distribution and Transmission Lines
Page | 5
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.105™-2010, IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
•
IEEE C37.106™-2003 (R2009), IEEE Guide for Abnormal Frequency Protection for Power Generating Plants
•
IEEE C37.108™-2002 (R2007), IEEE Guide for the Protection of Network Transformers
•
IEEE C37.109™-2006 (R2012), IEEE Guide for the Protection of Shunt Reactors
•
IEEE C37.110™-2007, IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes
•
IEEE C37.111™-1999 (R2005), IEEE Standard Common Format for Transient Data Exchange - COMTRADE - for Power Systems
•
IEEE C37.112™-1996 (R2007), IEEE Standard Inverse-Time Characteristic Equations for Overcurrent Relays
•
IEEE C37.113™-1999 (R2004), IEEE Guide for Protective Relay Applications to Transmission Lines
•
IEEE C37.114™-2004, IEEE Guide for Determining Fault Location on AC Transmission and Distribution Lines
•
IEEE C37.115™-2003, IEEE Standard Test Method for Use in the Evaluation of Message Communications between Intelligent Electronic Devices in an Integrated Substation Protection, Control, and Data Acquisition System
•
IEEE C37.116™-2007, IEEE Guide for Protective Relay Application to Transmission-Line Series Capacitor Banks
•
IEEE C37.117™-2007, IEEE Guide for the Application Protective Relays of Used for Abnormal Frequency Load Shedding and Restoration
•
IEEE C37.118™-2005, IEEE Standard for Synchrophasors for Power Systems
•
IEEE C37.118.1™-2011, IEEE Standard for Synchrophasor Measurements for Power Systems
•
IEEE C37.118.2™-2011, IEEE Standard for Synchrophasor Data Transfer for Power Systems
•
IEEE C37.119™-2005 (R2010), IEEE Guide for Breaker Failure Protection of Power Circuit Breakers
•
IEEE C37.230™-2007, IEEE Guide for Protective Relay Applications to Distribution Lines
Page | 6
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.231™-2006 (R2012), IEEE Recommended Practice for Microprocessor-Based Protection Equipment Firmware Control
•
IEEE C37.232™-2011, IEEE Recommended Practice for Naming Time Sequence Data Files
•
IEEE C37.233™-2009, IEEE Guide for Power System Protection Testing
•
IEEE C37.234™-2009, IEEE Guide for the Application of Rogowski Coils Used for Protective Relaying Purposes
•
IEEE C37.235™-2007, IEEE Guide for the Application of Rogowski Coils Used for Protective Relaying Purposes
•
IEEE C37.238™-2011, IEEE Standard Profile for Use of IEEE 1588 Precision Time Protocol in Power System Applications
•
IEEE C37.239™-2010, IEEE Standard for Common Format for Event Data Exchange (COMFEDE) for Power Systems
•
IEEE C57.13.1™-2006 (R2012), IEEE Guide for Field Testing of Relaying Current Transformers [Power Transformers (Distribution and Regulating)
•
IEEE C57.13.3™-2005, IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
Contents for Power Switchgear, Circuits & Fuses •
IEEE 1247™-2005, IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts
•
IEC/IEEE 62271-37-082™-2012(E), High-voltage switchgear and controlgear -Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers
•
IEEE/ISO/IEC 62271-111™-2005 - IEC 62271-111 Ed.1 (IEEE C37.60™2003-Compilation): High Voltage Switchgear and Controlgear Part 111: Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
•
IEEE C37.04™-1999 (R2006), IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
•
IEEE C37.04™-1999 Cor 1-2009, IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
Page | 7
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.04a™-2003 (R2006), IEEE Standard Rating Structure for AC HighVoltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Capacitance Current Switching
•
IEEE C37.04b™-2008 - IEEE Standard for Rating Structure for AC HighVoltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
•
IEEE C37.06™-2009, IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -Preferred Rating and Related Required Capabilities for Voltages Above 1000V
•
ANSI C37.06.1™-2000, Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated "Definite Purpose for Fast Transient Recovery Voltage Rise Times"
•
IEEE C37.09™-1999 (R2007), IEEE Standard Test Procedure for AC HighVoltage Circuit Breakers Rated on a Symmetrical Current Basis
•
IEEE C37.09™-1999/Cor1-2007, IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Corrigendum 1
•
IEEE C37.09a™-2005 (R2007), IEEE Standard Test Procedure for AC HighVoltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Capacitance Current Switching
•
IEEE C37.09b™-2010 (Amendment to IEEE C37.09™-1999) - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -- Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
•
IEEE C37.010™-1999, IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
•
IEEE C37.011™-2011, IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
•
IEEE C37.012-2005, IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
•
IEEE C37.013™-1997 (R2008), IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis
Page | 8
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.013a™-2007, IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Supplement for Use with Generators Rated 10-100 MVA
•
IEEE C37.015™-2009, IEEE Guide for the Application of Shunt Reactor Switching
•
IEEE C37.016™-2006, IEEE Standard for AC High-Voltage Circuit Switcher rated 15.5 kV through 245 kV
•
IEEE C37.017™-2010 Standard for Bushings for High Voltage (over 1000 Volts ac) Circuit Breakers and Gas Insulated Switchgear
•
IEEE C37.081™-1981 (R2007), IEEE Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
•
IEEE C37.081a™-1997 (R2007), Supplement to IEEE Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis 8.3.2: Recovery Voltage for Terminal Faults; Asymmetrical Short-Circuit Current
•
IEEE C37.083™-1999 (R2007), IEEE Guide for Synthetic Capacitive Current Switching Tests of AC High-Voltage Circuit Breakers
•
IEEE C37.10™-2011, IEEE Guide for Diagnostics and Failure Investigation of Power Circuit Breakers
•
IEEE C37.10.1™-2000 (R2006), IEEE Guide for the Selection of Monitoring for Circuit Breakers
•
IEEE C37.11™-1997 (R2003), IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
•
IEEE C37.12™-2008, IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts)
•
IEEE C37.12.1™-2007, IEEE Guide for High-Voltage (>1000 V) Circuit Breaker Instruction Manual Content
•
IEEE C37.13™-2008, IEEE Standard for Low Voltage AC Power Circuit Breakers Used in Enclosures
•
IEEE C37.13a™-2012 - IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to 1000 V AC and Below
Page | 9
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.13.1™-2006, IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
•
IEEE C37.13.1a™-2010, IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Revise Short-Circuit Rating and Test Requirement
•
IEEE C37.14™-2002 (R2008), IEEE Standard for Low- Voltage DC Power Circuit Breakers Used in Enclosures
•
IEEE C37.16™-2009, IEEE Standard for Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below) and DC (3200 V and below) Power Circuit Breakers
•
IEEE C37.17™-2012, American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers
•
IEEE C37.20.1™-2002 (R2007), IEEE Standard for Metal-Enclosed LowVoltage Power Circuit Breaker Switchgear
•
IEEE C37.20.1a™-2005 (R2007) (Amendment to IEEE C37.20.1™-2002), IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear; Amendment 1: Short-Time and Short-Circuit Withstand Current Tests— Minimum Areas for Multiple Cable Connections
•
IEEE C37.20.1b™-2006 (R2007) (Amendment to IEEE C37.20.1™2002), IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear; Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear
•
IEEE C37.20.2™-1999 (R2005), IEEE Standard for Metal-Clad Switchgear
•
IEEE C37.20.3™-2001 (R2006), IEEE Standard for MetalEnclosed Interrupter Switchgear
•
IEEE C37.20.4™-2013, IEEE Standard for Indoor AC Switches (1kV38kV) for Use in Metal-Enclosed Switchgear
•
IEEE C37.20.6™-2007, IEEE Standard for 4.76 kV to 38kV Rated Grounding and Testing Devices Used in Enclosures
•
IEEE C37.20.7™-2007, IEEE Guide for Testing Medium-Voltage MetalEnclosed Switchgear for Internal Arcing Faults
•
IEEE C37.20.7™-2007/Cor1-2010 - IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
•
IEEE C37.21™-2005, IEEE Standard for Control Switchboards
Page | 10
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.23™-2003 (R2008), IEEE Standard for Metal Enclosed Bus
•
IEEE C37.24™-2003 (R2008), IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
•
IEEE C37.26™-2003 (R2009), IEEE Guide for Methods of Power Factor Measurement for Low-Voltage Inductive Test Circuits
•
IEEE C37.27™-2008, IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately`-Mounted Current-Limiting Fuses
•
IEEE C37.30™-1997, IEEE Standard Requirements for High-Voltage Switches
•
ANSI C37.32™-2002, American National Standard for High Voltage Switches, Bus Supports, and Accessories Schedules of Preferred Ratings, Construction Guidelines, and Specifications
•
IEEE C37.34™-1994, IEEE Standard Test Code for High-Voltage Air Switches
•
IEEE C37.35™-1995, IEEE Guide for the Application, Installation, Operation and Maintenance of High-Voltage Air Disconnecting and Interrupter Switches
•
IEEE C37.36b™-1990 (R1996), IEEE Guide to Current Interruption with Horn-Gap Air Switches
•
IEEE C37.37™-1996, IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V)
•
IEEE C37.40™-2003 (2009), IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed SinglePole Air Switches, Fuse Disconnecting Switches, and Accessories
•
IEEE C37.41™-2008, IEEE Standard Design Tests for High- Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
•
IEEE C37.42™-2009, IEEE Standard Specifications for High-Voltage (>1000V) Expulsion Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches and Fuse Links, and Accessories Used with These Devices
•
IEEE C37.43™-2008 - IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors
Page | 11
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.45™-2007, IEEE Standard Specifications for High-Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 kV through 8.3 kV
•
IEEE C37.46™-2010, American National Standard for High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches
•
ANSI C37.47™-2011, American National Standard for High Voltage CurrentLimiting Type Distribution Class Fuses and Fuse Disconnecting Switches
•
IEEE C37.48™-2005 (2010), IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed SinglePole Air Switches, Fuse Disconnecting Switches, and Accessories
•
IEEE C37.48.1™-2011, IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38 kV
•
ANSI C37.50™-2012, American National Standard for Switchgear — LowVoltage AC Power Circuit Breakers Used in Enclosures; Test Procedures
•
ANSI C37.51™-2003 (R2010), American National Standard for Switchgear — Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies; Conformance Test Procedures
•
ANSI C37.53.1™-1989 (R1996), American National Standard High-Voltage Current-Limiting Motor-Starter Fuses - Conference Test Procedures
•
ANSI C37.54™-2002 (R2010) American National Standard for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear—Conformance Test Procedures
•
ANSI C37.55™-2002 (R2010) American National Standard for Switchgear— Medium-Voltage Metal-Clad Assemblies—Conformance Test Procedures
•
ANSI C37.57™-2003 (R2010) American National Standard for Switchgear— Metal-Enclosed Interrupter Switchgear Assemblies—Conformance Testing
•
ANSI C37.58™-2003 (R2010) American National Standard for Switchgear— Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear— Conformance Test Procedures
•
IEEE C37.59™-2007, IEEE Standard Requirements for Conversion of Power Switchgear Equipment
Page | 12
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
•
IEEE C37.60™-2012 - IEEE Standard for High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
•
IEEE C37.63™-2013 - IEEE Standard Requirements for Overhead, PadMounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
•
IEE C37.66™-2005 - IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
•
IEEE C37.74™-2003 - IEEE Standard Requirements for Subsurface, Vault, and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up
•
ANSI/IEEE C37.82™-1987 (R2009) - IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
•
ANSI C37.85™-2002 (R2010) - American National Standard for Switchgear-Alternating-Current High-Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits
•
IEEE C37.100™-1992 (R2001) - IEEE Standard Definitions for Power Switchgear
•
IEEE C37.100.1™-2007 - IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
•
IEEE C37.122™-2010 - IEEE Standard for High Voltage Gas-Insulated Substations Rated Above 52 kV
•
IEEE C37.122.1™-1993 (R2002) - IEEE Guide for Gas-Insulated Substations
•
IEEE C37.122.2™-2011 - IEEE Guide for the Application of Gas-Insulated Substations 1 kV to 52 kV
•
IEEE C37.122.3™-2011 - IEEE Guide for Sulphur Hexafluoride (SF6) Gas Handling for High-Voltage (over 1000 Vac) Equipment
•
IEEE C37.301™-2009 - IEEE Standard for High-Voltage Switchgear (Above 1000 V) Test Techniques - Partial Discharge Measurements
Page | 13
IEEE Power, Switchgear, Substations & Relays Standards Collection: VuSpec™
Bonus Features •
New VuSpec™ Series Interface Starts Automatically in Your Web Browser with Free Adobe Reader Software, Powerful Search Features Search on Abstracts, Keywords, An Entire Standard, or Across Multiple Standards.
•
Portable VuSpec CD-ROM for Microsoft Windows (limited PDF-only access for MacOS, Linux, UNIX, and others)
LICENSING: SINGLE - USER EDITION: THIS PRODUCT IS LICENSED FOR ONE USER ONLY
Page | 14