HUAWEI TECHNOLOGIES CO., LTD. General Disclaimer The information in this document may contain predictive statements inc
Views 1,213 Downloads 42 File size 30MB
HUAWEI TECHNOLOGIES CO., LTD.
General Disclaimer The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Version No.: M3-034405-20160129-C-1.0 www.huawei.com/antenna
Huawei Antenna & Antenna Line Products Catalogue 2016
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.
Issue 02
Huawei Antenna & Antenna Line Products Catalogue 2016
Antenna Modernization Paves the Way for MBB 2020 MBB 2020 is geared to future development and will provide users with an unprecedented service experience. The way of exchanging information will be further upgraded, enabling them to experience more innovative services, such as virtual reality, ultra-HD video, unmanned driving, remote health care and smart agriculture. Wireless networks as the infrastructure for MBB 2020 will support more connections between people, between people and things, and between things.
As MBB networks develop, antenna systems will play a key
2. M ulti-beam antennas better support multi-sector
role in unleashing MBB network potential. The addition of
networking. A multi-sector networking solution facilitates
new frequency bands, the development of MIMO, and the
fast capacity expansion in dense urban areas if spectrum
wide application of multi-sector networking will require the
resources are limited. However, traditional narrow-beam
support of antenna systems.
antennas cause severe interference between multi-sector neighboring cells, affecting the capacity expansion effect.
To ensure the smooth evolution of the MBB network to a target
Multi-beam antennas can effectively solve the problem of
network over the next three to five years, continuous capacity
neighboring cell interference, improving network capacity.
expansion and fast deployment is becoming a must. Antenna
3. Active Antenna Unit (AAU) is the future site evolution
2020 reconstruction geared to MBB 2020 is particularly
trend. In traditional site deployment, there are a large number
important.
of boxes, making antenna deployment more complicated.
1. A single antenna can support more frequency bands
Compared with traditional antennas, AAU has the following
and higher-order MIMO. With the deployment of more frequency bands and application of higher-order MIMO, antenna systems are becoming more and more complex, and
advantages: • Simplifies site: AAU reduces the number of devices installed on a tower by integrating the radio and antenna systems.
more space is required for antenna installation. Traditional
• Promotes deployment efficiency: Integrated installation of
single-band antennas can hardly meet the requirements of
radio and antenna systems reduces deployment difficulties and
MBB.
time required, promoting deployment efficiency and reducing
Compared with traditional single-band antennas, multi-band
deployment costs.
antennas require less installation space, saving site resources.
• Improves network performance: AAU can reduce feeder
Huawei Antenna Vision To focus on customers' challenges and needs in MBB Era by providing best network antenna solutions based on deep insight into network.
loss. Meanwhile, AAUs support MIMO and beamforming
time deployment of full-series multi-band antennas, multi-
technologies, which enhance network capacity and coverage.
beam antennas for larger capacity, AAU simplifying site
• Supports future-oriented evolution: AAUs support key
deployment, and intelligent management improving
technologies such as massive MIMO and 3D beamforming,
O&M efficiency are four highlights of antenna 2020. Based
laying the foundation for 5G development.
on its deep understanding of MBB network deployment and development, Huawei is launching a series of innovative active and
Based on these considerations, modernization of the antenna
passive antenna solutions, helping operators implement antenna
system is a must for future MBB network development. One-
2020 and paving the way for MBB 2020.
One Time Deployment with Multi-band Antennas In the next three to five years, it will be a common phenomenon
series small-sized multi-low-band antennas, which support
for two to three low frequency bands to coexist in one sector.
700 MHz, 800 MHz, and 900 MHz co-site deployment. Each
Low-band 2T4R or 4T4R also requires that antennas support
frequency band supports independent downtilt adjustment. This
more low frequency bands. Huawei is providing golden platform
accelerates the large-scale deployment of low frequency bands.
• Bands: 790-862/880960/1710-2690/…
• Bands: 690-862/880960/1710-2690/…
• Bands: 690-803/824960/1710-2690/…
• Bands: 2*690960/1695-2690/…
Leading Multi-low-band Antenna Portfolio
Future deployment of multiple high bands such as 1800 MHz, 2100 MHz, L band, 2300 MHz and 2600 MHz and MIMO evolution will require antennas to have more highband ports. To address these needs, Huawei is launching diamond platform series high-band antennas, which have an innovative compact side-by-side (SBS) structure,
Bands: 690-960/1427-2200/ 2*1695-2690MHz
reducing the antenna size and achieving better MIMO performance. Innovative Diamond Platform
Innovative Multi-beam Antennas Providing Larger Capacity Huawei multi-beam antennas adopt innovative array technology to achieve better side lobe suppression and reduce inter-sector
6-sector network @2.1G
interference, improving network capacity by 70% and fully matching the six-sector solution. Huawei's full series of multi3-sector network @700/800/900M
beam antennas not only support six sectors separately, but also support hybrid networking of three sectors and six sectors, saving antenna space.
3-sector network @1.8-2.6G 4T4R
Hybrid Multi-beam Antenna for 3 & 6-sector Network
AAU Simplifying Site Deployment and Supporting Future-oriented Evolution Huawei is launching a full series of AAU products, which support flexible combination of high and low bands, beamforming, and easy installation. They simplify site configuration, reduce installation space, facilitate fast deployment, improve network performance, support smooth evolution to protect investment, and meet deployment requirements in different scenarios. AAU3961 with highly integrated design, not only supports dual bands 4T4R deployment, but also can help operators to do sites simplification. Easy MacroTM is small and light and elegant in appearance and easily blends into the surrounding environment.
AAU391X
AAU3940 and AAU3920 support multi-band, with 1.8 GHz and
AAU3920
AAU3961
AAU3940 (Easy MacroTM)
2.1 GHz supported on one module.
Huawei AAU Family
Efficient O&M and Intelligent Management As antenna systems become increasingly complex, making
reliability by 200%. The Self-Aware Antenna (SAA) solution
antennas accessible and adjustable and eliminating site visits
enables operators to remotely query antenna mechanical
are the key to decreasing OPEX and improving network O&M
downtilt, azimuth, height, and latitude and longitude in real
efficiency.
time, facilitating network O&M and improving Self-Organizing Network (SON) performance. The EasyBeam solution enables
Huawei's innovative plug-and-play EasyRET solution increases
operators to remotely adjust the downtilt, azimuth and
the RET system deployment efficiency by 40% and improves
horizontal beamwidth, improving network performance.
Constant R&D Investment Driving Innovation Due to antennas' key role in wireless networks, Huawei will
and RAN to ensure optimal antenna performance within the
continue to invest in antenna-related R&D. Huawei currently
network. Huawei participates in more than 50 standards
has eight R&D centers committed to active and passive antenna
organizations to promote the development of the antenna
technology research around the world. They are in Munich/
industry. In 2014, the EasyBeam solution launched by Huawei
Germany, New Jersey/USA, Ottawa/Canada, Stockholm/Sweden,
won GTB's Wireless Network Infrastructure Innovation Award.
Moscow/Russia Shenzhen/China, Xi'an/China, and Shanghai/
In 2015, the SAA solution launched by Huawei received this
China. Huawei uses coordination between the antennas
award again.
Stockholm, Sweden Ottawa, Canada
Munich, Germany
Moscow, Russia
New Jersey, USA Xi'an, China
Shanghai, China Shenzhen, China
AAS & Passive antenna AAS Passive antenna
New Jersey, USA
Ottawa, Canada
Munich, Germany
Stockholm, Sweden
Moscow, Russia
Xi'an, China
Shanghai, China
Shenzhen, China
Strict Quality Control Huawei's antenna product line places quality above all else.
automation equipment to ensure a high degree of consistency and
Huawei has built execution standards and inspection specifications
quality. In 2015, Huawei realized comprehensive lead-free antenna
for each process, including supplier management, incoming
production. Eco-friendly antennas help improve the environment
material inspection, production, delivery, and customer satisfaction
and contribute to sustainable social and economic development
management. The production process uses a large amount of
and also set a new benchmark in the antenna industry.
Automated cable stripping
Automated connector soldering
Automated phase shifter soldering
Automated screw driver
Automated soldering of feeding network
Automated packing
Antenna production line
Global Supply Centers Ensure Prompt Delivery Huawei has established five global supply centers (in China,
chosen by all the top 30 operators around the world, deployed
Brazil, Mexico/Panama, Hungary, and the UAE) and one Hub (in
380+ networks in 160+ countries.
the Netherlands) to ensure fast delivery. Huawei antennas are
Netherlands
Hungary Europe / Russia / Turkey / North Africa
Mexico
Dubai
North America/Latin America
Middle East/Southeast Africa
Panama
Shenzhen China/Middle Asia/South Pacific/Southeast Asia/ East Russia/West Africa/North Africa
Nigeria Brazil
Hub
Supply center
Bonded warehouse
Antenna Type Naming Rule Example: D XXXXX-690-960/1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-B/R
Diagram: X1 X2
X3
Polarization
X4
X5
Frequency range
Gain
D
Directional
O
Omni-directional
C
Cluster
I
Indoor
Number + M
Multi Beam, 3M means three beams
CP
Camouflage Pipe
CS
Camouflage Square Column
X
X Polarization
V
Vertical Polarization
H
Horizontal Polarization
C
Circular Polarization
X3
Number
Frequency Bandwidth
X4
Number
Half-power Beam Width
X5
Number
Gain(dBi)
Number + Letter
0F: Fixed Downtilt
Letter
M: Electrical Downtilt
C
Combiner Integrated
B
Bias Tee Integrated
T
TMA Integrated
R
RCU Integrated
AS
Azimuth Steering
HE
High Efficiency
ESLS
Enhanced Side Lobe Suppression
S
4.3-10 Connector
AISU
Antenna Information Sensor Unit
X1
X2
X6
X7
X7
Downtilt type
Half-power beamwidth
Antenna type
X6
Antenna characteristic
Product Model Naming Rule Antenna Model Naming Example: A
DU 45
16
R
0
v01 A2
Notes for frequency characters: 45: Single-band antennas (450-470 MHz) 70: Single-band antennas (690-960 MHz) 79: Single-band antennas (790-960 MHz) 19: Single-band antennas (1710-2200 MHz or 1710-2170 MHz) 26: Single-band antennas (1710-2690 MHz) DU: Dual-band antennas TR: Tri-band antennas QU: Quad-band antennas PE: Penta-band antennas SI: Six-band antennas TD: TD antennas MB: Multi-beam antennas
AISG interface quantity (optional) A1: 1 input 1 output A2: 2 input 2 output S: 4.3-10 Connector v01/v02 version (optional) Different antenna in ascending order Antenna types R: RCU Integrated Number: MET or FET Gain (the maximum gain of all the band) Polarization Frequency characters DU: Dual-band A: Antenna products C: Camouflage antennas
RCU Model Naming Example: A
RCU
020
04
v01
AIMM Model Naming Example: A
IMM
21
S
11
EB
v01 v01/v02 Version (optional)
v01/v02 version (optional)
Functional character (optional) EB: Easy Beam
Different RCU in ascending order
00-- MET module 11-- AISG interface: 1 input 1 output 22-- AISG interface: 2 input 2 output
AISG Version 011: AISG 1.1 020: AISG 2.0
AIMM types S: for single-band antenna D: for dual-band antenna M: for multi-band antenna
RCU
AISG Version: 20 (AISG 2.0)/21 (AISG 2.1) IMM: Information management module
ALD products
TMA Model Naming Example: A
TA
26
11
00
v01
ALD products
Combiner Model Naming Example: A
COM
D
2
H
00
v01
v01/v02 Version (optional)
v01/v02 Version (optional)
Different TMA in ascending order
Different combiner in ascending order
AISG Version 11: AISG 1.1 22: AISG 2.0
DC bypass properpies H: High-band DC bypass 2: Dual unit
Frequency (26: 2600M TMA)
Frequency character D: Dual-band combiner
TA: TMA
COM: Combiner
ALD products
ALD products
AISG Colour Coding Technology Antenna Port Colour Coding Colour coding is used to identify antenna RF ports and also for RET remote identification. Colour coding consists of five parts generally: colour code, pattern coding, array numbering, array symbol and RCU serial number. A hexa-band EasyRET antenna is used as an example to illustrate colour coding:
1. Colour Code
2. Pattern Coding
(Used to distinguish different bands. For details, please see chapter 1.)
(Used to differentiate array ports carrying the same colour code. For details, please see chapter 2.)
3. Array Numbering (Used to mark different array ID and array positions. For details, please see chapter 3.)
4. Array Symbol (Used to display the physical structure of the antennas. For details, please see chapter 4.) Two types of array symbol are used (Type 1 and Type 2). Which type is used depends on specific antennas. This also applies to chapter 3 Array numbering and chapter 5 RCU serial number. Type 1
Type 2 2 Filtered Low Bands r1: 690-862MHz r2: 880-960MHz r1 and r2 share the same low-band array
Ly1
Cy2
r1
Rb1 Ry3
r2
4 high-band arrays Ly1, Cy2: 1710-2690MHz Rb1: 1710-2200MHz Ry3: 2490-2690MHz Rb1 and Ry3 share the same low-band array
2 Filtered Low Bands r: 690-862MHz rr: 880-960MHz r and rr share the same low-band array yL
yyC
r
bR yyyR
rr
4 high-band arrays yL, yyC: 1710-2690MHz bR: 1710-2200MHz yyyR: 2490-2690MHz bR and yyyR share the same low-band array
5. Integrated RCU Serial Number (Used to distinguish RCUs of different bands to support remote RCU identification. For details, please see chapter 5.) Type 2:
Type 1: HWMxxx..........r1 HWMxxx..........r2 HWMxxx..........Rb1
HWMxxx..........Ly1 HWMxxx..........Cy2 HWMxxx..........Ry3
HWMxxx..........r HWMxxx..........rr HWMxxx..........bR
HWMxxx..........yL HWMxxx..........yyC HWMxxx..........yyyR
AISG Colour Coding Technology 1. Colour Code According to AISG, the upper band edge ranges of the antenna port are represented by red, green, blue, and yellow in sequence from the low band range to the high band range. The following table shows the definition of the frequency range and the associated colour code abbreviation. Upper Band Edge Range
Assigned Colour Code
Colour Code Abbreviation
700MHz to 1000MHz
RAL 3020
r
1001MHz to 1700MHz
RAL 6029
g
1701MHz to 2300MHz
RAL 5015
b
2301MHz to 4000MHz
RAL 1023
y
2. Pattern Coding Pattern coding is used for differentiation of array ports carrying the same colour code. Different segments of colour and gaps are shown in the following table. Note: Gaps between coloured segments may be white gaps or black lines.
y1 (or y)
y2 (or yy)
y3 (or yyy)
y4 (or yyyy)
y5 (or yyyyy)
3. Array Numbering For multi-band antennas, different arrays are indicated by their colour code abbreviations, array IDs, as well as array positions. There are two types of array numbering. Array ID: e.g. “y1” or “y” for the first high-band array, ”y2” or ”yy” for the second high-band array. Array position is represented by abbreviation (e.g. L, C, R, T, M, and B), the following table shows the details. Array Horizontal Definition
Array Vertical Definition
Abbreviation
Full Name
Abbreviation
Full Name
L
Left Array
T
Top Array
C
Center Array
M
Middle Array
R
Right Array
B
Bottom Array
Take a hexa-band antenna for example, array with Ry3 or yyyR means the third high-band array and located at right position inside of antenna.
AISG Colour Coding Technology 4. Array Symbol In order to better display the physical structure of Huawei antennas, the array symbol corresponding to the array ID and array position is shown in the catalogue. The following figures show the physical structures of different antennas as examples:
Type 1
Ⅰ. Dual-band Antenna 2 Filtered Low Bands ("Dipole reuse") e.g. 790-862/880-960 or 690-803/824-960 MHz
r
or
Ⅴ. Tri-band Antenna 1 Low Band 2 Stacked High-band Arrays e.g. 790-960/17102180/1710-2180 MHz
Ly1
bbB
r1
r
r1 r2
or
Ly1
Ly1
Type 2
rL
or
Ry2
yL
or
Ry2
yyR
r
rr
Type 1 Ⅷ. Quad-band Antenna 1 Low Band 3 Side-by-side High-band Arrays e.g. 690-960/1710-2690/ 1710-2690/1710-2690 MHz
Ly1
Cy2
r1
yyR
Type 2
yL
yyR
r
or
Ry3
rrR
Type 2
r1
Type 2
yL
Rr2
Type 1 Ⅵ. Tri-band Antenna 1 Low Band 2 Side-by-side High-band Arrays e.g. 790-960/1710-2690/17102690 or 690-960/17102690/1710-2690 MHz
bT
Bb2
Ry2
Ⅳ. Dual-band Antenna 2 Side-by-side High-band Arrays e.g. 1710-2690/1710-2690 MHz
y
Lr1
or
Type 1
Type 2
Tb1
Type 1
Ⅱ. Dual-band Antenna 2 Side-by-side Low-band Arrays e.g. 690-960/690-960 MHz
rr
b
or
Type 1
Type 2
b1 y1
Type 1
Ⅶ. Quad-band Antenna 2 Filtered Low Bands 2 Side-by-side High-band Arrays e.g. 790-862/880-960/ 1710-2690/1710-2690 or 690-803/824-960/17102690/1710-2690 MHz
Type 2
r1 r2
Type 1
Ⅲ. Dual-band Antenna 2 Filtered High Bands ("Dipole reuse") e.g. 1710-2170/2490-2690 MHz
or
Type 2
yL
yyC
r
yyyR
AISG Colour Coding Technology 5. RCU Serial Number The SN (serial number) of integrated RCU contains colour coding information, EasyRET antennas support remote RCU identification by colour coding. The SN of an integrated RCU contains 19 digits. The following describes a hexa-band EasyRET antenna's SN as an example:
Type 1:
H W M 1 5 3 4 F 6
0
0
1
0
0
2
1
R
y
2
Type 2:
H W M 1 5 3 4 F 6
0
0
1
0
0
2
1
y
y
R Color coding: Use the last or last several digits to show the band features and position of the antenna port. Fill other digits that are not used with a random code. Running number (random) Delivery month (9: september) Delivery year (F: the year of 2015) ITEM code of the antenna RET Type, M: integrated RCU Manufacturer code, fixed as HW
A
Active Antenna
AAU
B - 1. Single-band Antenna
B - 2. Dual-band Antenna
B - 3. Tri-band Antenna
B
Passive Antenna
B - 4. Quad-band Antenna
B - 5. Penta-band Antenna B - 6. Hexa-band Antenna
B - 7. Multi-beam Antenna
B - 8. TDD Antenna B - 9. Cluster Antenna
C
Antenna Information Management
C - 1. RET System C - 2. Intelligent Management
D - 1. TMA
D
Antenna Line Product
D - 2. Combiner
E
Bracket&Installation Guide
E - 1. Bracket E - 2. Installation Guide
Index of Antenna and Antenna Line Product The products are listed in an alphabetical & numeric order. New or changed product. Model
Page
Active Antenna
Model
Page
A7…
AAU…
Model
Page
ADU4517C0
78
Model
AMB4520R3
A704515R0
27
ADU4517R0v01
59
A704516R0
29
ADU4517R3
68
APE…
Page
236
AAU3961
1
A704517R0
31
ADU4517R6
65
APE4517R0
217
AAU3940
2
A704521R0
33
ADU451807v01
74
APE4518R0
209
AAU3920
3
A79451500v01
9
ADU451816v02
114
APE4518R1
212
AAU3911
4
A79451503
21
ADU451819v01
104
APE4518R12
215
AAU3910
5
A794515R0
11
ADU4518C0
82
A794515R1
23
ADU4518C1
80
AQU…
A79451600v02
13
ADU4518R0
76
AQU4517R4
175
A794516R0
15
ADU4518R10
88
AQU4518R0
189
A79451700v02
17
ADU4518R11
92
AQU4518R1
192
A79451702
25
ADU4518R12
96
AQU4518R11
200
A794517R0
19
ADU4518R1v01
106
AQU4518R14
197
ADU4518R3
72
AQU4518R17
179
ADU4518R5
110
AQU4518R19
177
ADU4518R6v01
116
AQU4518R21
205
Passive Antenna
A1… A19451505
37
A19451703
35
A19451811v01
39
ADU…
A194518R0v01
41
ADU451503
66
A19451902
43
ADU451507
112
ADU4518R7
100
AQU4518R22
185
A19452101
36
ADU4515R0v01
55
ADU4518R8
102
AQU4518R24
181
ADU4515R5
61
ADU4518R9
98
AQU4518R25
183
ADU451602v01
70
ADU451902
108
AQU4518R4
173
AQU4518R5
171
AQU4518R7
186
A2... A26451500
45
ADU451604v01
90
A26451800v02
47
ADU4516R0v01
57
AMB…
A264518R0v01
49
ADU4516R6
64
AMB4519R0
228
AQU4518R8
203
249
ADU4516R7
62
AMB4519R2
237
AQU4518R9
195
ADU451712v01
94
AMB452000
230
ADU451716v01
86
AMB4520R0
232
ASI…
ADU451720
84
AMB4520R1
234
ASI4518R10
A264518S0
A4… A45451500
51
225
Model
Page
Model
Page
Model
Page
Model
Page
ASI4518R11
219
ATR4518R4
141
ACOMD2H22
326
ASI4518R4
222
ATR4518R6
155
ACOMD2L04
332
ATR4518R7
143
ACOMD2L08
317
APAA…
ACOMQ2A01
353
APAA00001
ACOMQ2H00
350
ACOMQ2M00
350
ARCU…
ACOMT2A02
338
ARCU02001
255
ARCU02004
256
ATD… ATD4516R5
240
ATD4516R7
244
ATD4517R0
247
ATR…
TMA
ATA… ATA182001
293
ACOMT2A03
344
ATA212001
296
ACOMT2A04
347
AISU00001
ATR451602v01
127
ATA262000
299
ACOMT2H01
341
AREU…
ATR451606
147
ATA702000
278
ACOMT2H03
341
AREU01301
ATR451607
149
ATA802000
281
ACOMT2H04
335
ATR4516R0
129
ATA902001
287
ACOMT2H08
341
ATR451704v01
135
ATA902002
284
ATR451709
145
ATA902003
290
ADC…
ATR451714v01
165
ATADU2001
308
ADCSTOP00
ATR451715
131
ATADU2002
302
ATR4517R0
137
ATADU2003
305
ATR4517R1
139
ATADU2005
311
ATR4517R3
133
ATR4517R5
125
ATR451806
151
ATR451807
159
ACOM…
ATR4518R11
157
ACOMD2H00
326
AIMM20D11
ATR4518R12
123
ACOMD2H06
329
ATR4518R13
153
ACOMD2H08
ATR4518R14
167
ATR4518R15
274
272
262
ASBT… ASBT00001
264
ASBT00002
264
356 Bracket
Antenna Information Management ASM… ABT…
ASMC00001
360
ASMC00002
360
ASMC00003
360
ASMC00006
368
258
ASMDT0A01
362
AIMM20D22
259
ASMDT0B01
363
329
AIMM20M11
260
ASMDT0C01
364
ACOMD2H09
320
AIMM20M22
261
ASMDT0D01
365
161
ACOMD2H11
323
AIMM20S11
257
ASMDT0F01
367
ATR4518R2
121
ACOMD2H16
332
ASMDT0G01
366
ATR4518R3
163
ACOMD2H18
320
ASMWM0001
369
Combiner
ABT000001
267
AIMM…
AISU…
AAU
A. Active Antenna Model
Page
A-1
AAU3961
1
A-2
AAU3940
2
A-3
AAU3920
3
A-4
AAU3911
4
A-5
AAU3910
5
AAU
Model: AAU3961
Product Description
AAU3961 product which base on 3 side-by-side high bands and 1 low band antenna platform, can support dual active high frequency bands with 4T4R as well as 1 high and 1 low passive frequency bands as 2T2R. It is a best choice for
operators in 4*4 MIMO network deployment. With the highly integrated design, AAU3961 product also help operators to simply sites efficiently.
AAU3961 Active & Passive Configuration
2A+2P
Frequency(Hz)
Active: 1.8G, 2.6G Passive: 1.8G, 2.1G, 2.6G, 700M, 800M, 850M, 900M
TX/RX
4T4R
EIRP
4*63dBm
Technology
GSM, UMTS, LTE
Dimensions (H x W x D)
1550mm(H)*370mm(W)*230mm(D)
Weight
45kg(1A), 63kg(2A)
Temperature
- 40℃~50℃
Heat Dissipation
Natural Cooling
Wind load
Frontal/lateral/rearside:665N/500N/985N at 150km/h
Passive Connector
4 x 4.3-10 Connector Female
Electrical downtilt
2 - 12°, continuously adjustable(High frequency bands) 0 - 14°, continuously adjustable(Low frequency bands)
1
Model: AAU3940
Product Description
AAU3940 (Easy Macro™) cylindrical design with the perfect blend of the surrounding environment, small size but with macro-level power, supports flexible installation on lamppost, utility pole, wall and other scenes, which
greatly reduces the difficulty of site acquisition, and improves the efficiency of network deployment.
AAU3940 Active & Passive Configuration Frequency
2A Active: 1.8G, 2.1G
Active: PCS, AWS
TX/RX
2T2R
EIRP
2*58.8dBm
Technology
UMTS, LTE
Dimensions (H x W x D)
750mm (H)*150mm(Ø )
Weight
15kg –40°C to +50°C (2*30W)
Temperature
–40°C to +40°C (2*40W)
Heat Dissipation
Natural Cooling
Wind load
Frontal/lateral/rearside:100N/100N/115N at 150km/h
Passive Connector
NULL
Power Type Electrical downtilt
2
AC / DC
DC -3 - 12° , continuously adjustable
AAU
Model: AAU3920
Product Description
AAU3920 support multi-band, using SDR (Software Define Radio) and SDB (Software Define Band) technology to adjust frequency and mode by software. It can help operators to realize long-term multi-mode and multi-band network evolution strategy. The power can be allocated between different bands and RATs based on the capacity and user distribution. It can be adjusted remotely by software, no
need site visiting, significantly reduce TCO.
AAU3920 Active & Passive Configuration
2A+1P
Frequency(Hz)
Active: 1.8G, 2.1G Passive: 2.6G
TX/RX
2T4R
EIRP
2*66.5dBm
Technology
GSM, UMTS, LTE
Dimensions (H x W x D)
1450mm(H)*320mm(W)*188mm(D)
Weight
35kg
Temperature
- 40℃~55℃
Heat Dissipation
Natural Cooling
Wind load
Frontal/lateral/rearside:710N/400N/830N at 150km/h
Passive Connector
4 x 7/16 DIN Female
Electrical downtilt
0 - 12° , continuously adjustable
3
Model: AAU3911
Product Description
Multi-band and multi-mode AAU 391X series can effectively solve the problem of limited site space in the era of multi-band and multi-mode and simplify the antenna installation platform .
AAU 3911 support both high and low frequency bands.
AAU3911
4
Active & Passive Configuration
2A+2P
Frequency
Active: 1.8G, 2.1G, AWS, 2.6G Passive: 1.8G, PCS, 2.1G, 2.6G, 700M, 800M, 850M, 900M
TX/RX
2T4R
EIRP
2*64.8dBm
Technology
GSM, UMTS, LTE
Dimensions (H x W x D)
2020mm(H)*359mm(W)*290mm(D)
Weight
49kg/54kg(1A), 64kg(2A)
Temperature
- 40℃~55℃
Heat Dissipation
Natural Cooling
Wind load
Frontal/lateral/rearside:990N/740N/965N at 150km/h
Passive Connector
6 x 7/16 DIN Female, or 2 x 7/16 QDIN Female
Electrical downtilt
0 - 10° , continuously adjustable
AAU
Model: AAU3910
Product Description
Multi-band and multi-mode AAU 391X series can effectively solve the problem of limited site space in the era of multi-band and multi-mode and simplify the antenna installation platform .
AAU 3910 support high frequency bands.
AAU3910 Active & Passive Configuration
2A+1P
Frequency
Active: 1.8G, 2.1G, 2.6G, AWS Passive: 1.8G, PCS, 2.1G, 2.6G
TX/RX
2T4R
EIRP
2*65.3dBm
Technology
GSM, UMTS, LTE
Dimensions (H x W x D)
1450mm(H)*320mm(W)*230mm(D)
Weight
39.5kg(1A), 53.5kg(2A)
Temperature
- 40℃~55℃
Heat Dissipation
Natural Cooling
Wind load
Frontal/lateral/rearside:660N/420N/710N at 150km/h
Passive Connector
4 x 7/16 DIN Female
Electrical downtilt
0 - 12° , continuously adjustable
5
Single-band
B. Passive Antenna B - 1. Single-band Antenna
Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Range (MHz) beam width (°) downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
790-960
65
15
0-14
MET1.0
2 x 7/16 DIN-F
1356 x 259 x 135
A79451500v01
9
A
790-960
65
15
0-14
EasyRET2.0
2 x 7/16 DIN-F
1356 x 259 x 135
A794515R0
11
A
790-960
65
16.5
0-12
MET1.0
2 x 7/16 DIN-F
1936 x 259 x 135
A79451600v02
13
A
790-960
65
16.5
0-12
EasyRET2.0
2 x 7/16 DIN-F
1936 x 259 x 135
A794516R0
15
A
790-960
65
17.5
0-10
MET1.0
2 x 7/16 DIN-F
2535 x 259 x 135
A79451700v02
17
A
790-960
65
17.5
0-10
EasyRET2.0
2 x 7/16 DIN-F
2535 x 259 x 135
A794517R0
19
A
790-960
90
15
0-12
MET2.0
2 x 7/16 DIN-F
1936 x 259 x 135
A79451503
21
A
790-960
90
15
0-12
EasyRET2.0
2 x 7/16 DIN-F
1936 x 259 x 135
A794515R1
23
A
790-960
90
17
0-10
MET1.0
2 x 7/16 DIN-F
2535 x 259 x 135
A79451702
25
A
690-960
65
15
0-14
EasyRET2.0
2 x 7/16 DIN-F
1415 x 298 x 149
A704515R0
27
A
690-960
65
16.5
0-12
EasyRET2.0
2 x 7/16 DIN-F
1936 x 298 x 149
A704516R0
29
A
690-960
65
17.5
0-10
EasyRET2.0
2 x 7/16 DIN-F
2535 x 298 x 149
A704517R0
31
A
690-960
33
20.5
0-10
EasyRET2.0
2 x 7/16 DIN-F
2580 x 590 x 169
A704521R0
33
A
1710-2170
90
17
2-10
MET1.0
2 x 7/16 DIN-F
1306 x 155 x 79
A19451703
35
B
1710-2170
33
21
2-10
MET1.0
2 x 7/16 DIN-F
1318 x 289 x 85
A19452101
36
B
1710-2200
65
15.5
0–12
MET1.0
2 x 7/16 DIN-F
702 x 155 x 89
A19451505
37
B
1710-2200
65
18
0-10
MET2.0
2 x 7/16 DIN-F
1365 x 155 x 89
A19451811v01
39
B
1710-2200
65
18
0-10
EasyRET2.0
2 x 7/16 DIN-F
1365 x 155 x 89
A194518R0v01
41
B
1710-2200
65
19.5
0-6
MET1.0
2 x 7/16 DIN-F
1954 x 155 x 89
A19451902
43
B
1710-2690
65
16
0-14
MET1.0
2 x 7/16 DIN-F
841 x 155 x 109
A26451500
45
C
B - 1. Single-band Antenna
Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Range (MHz) beam width (°) downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
1710-2690
65
18
0-12
MET2.0
2 x 7/16 DIN-F
1365 x 155 x 89
A26451800v02
47
C
1710-2690
65
18
0-12
EasyRET2.0
2 x 7/16 DIN-F
1365 x 155 x 89
A264518R0v01
49
C
450-470
65
15
0
FET
2 x 7/16 DIN-F
2042 x 486 x 98
A45451500
51
/
** Preliminary Issue
Array Symbol Type
Type A
Type B
Type C
r
b
y
DX-790-960-65-15i-M Model: A79451500v01
Single-band
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
14.6
14.8
15.1
14.5 ± 0.3
14.8 ± 0.3
15.1 ± 0.4
> 18
> 18
> 17
68 ± 1.4
67 ± 1.6
65 ± 2.3
16.0 ± 0.8
15.3 ± 0.7
14.5 ± 0.8
Side lobe suppression for first side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio (dB) Cross polar ratio (dB)
0°
> 25
> 24
> 24
> 25
> 25
> 25
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1356 x 259 x 135
Packing dimensions (H x W x D) (mm)
1640 x 305 x 190
Antenna weight (kg)
11.2
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
19.4 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
9
DX-790-960-65-15i-M Model: A79451500v01
56
Unit: mm
70
790 - 960 X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
10
DX-790-960-65-15i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU-1.4m Model: A794515R0 Single-band
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
14.6
14.8
15.1
14.5 ± 0.3
14.8 ± 0.3
15.1 ± 0.4
> 18
> 18
> 17
68 ± 1.4
67 ± 1.6
65 ± 2.3
16.0 ± 0.8
15.3 ± 0.7
14.5 ± 0.8
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30°(dB) Cross polar ratio (dB)
> 25 0°
> 25
> 24
> 24
> 25
> 25
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1356 x 259 x 135
Packing dimensions (H x W x D) (mm)
1635 x 300 x 190
Antenna weight (kg)
10.8
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
17.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
11
DX-790-960-65-15i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU-1.4m Model: A794515R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r r - Red
Pattern sample for reference
790 - 960 MHz
12
r
DX-790-960-65-16.5i-M Model: A79451600v02
Single-band
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable 16.3
16.5
16.8
16.2 ± 0.4
16.4 ± 0.4
16.6 ± 0.4
> 17
> 17
> 18
69 ± 1.2
68 ± 1.8
65 ± 2.6
10.1 ± 0.6
9.8 ± 0.5
9.2 ± 0.5
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB)
> 25
> 25
> 25
Cross polar ratio (dB)
> 25
> 25
> 25
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
Antenna weight (kg)
12.9
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
20.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: Lateral: Rear side:
Wind load (N) Max. operational wind speed (km/h)
665 (at 150 km/h) 345 (at 150 km/h) 880 (at 150 km/h) 200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 12 °
1.3 kg
1 (Separate packing)
13
DX-790-960-65-16.5i-M Model: A79451600v02
56
Unit: mm
70
790 - 960 X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
14
DX-790-960-65-16.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU-2.0m Model: A794516R0 Single-band
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
16.3
16.5
16.8
16.2 ± 0.4
16.4 ± 0.4
16.6 ± 0.4
> 17
> 17
> 18
69 ± 1.2
68 ± 1.8
65 ± 2.6
10.1 ± 0.6
9.8 ± 0.5
9.2 ± 0.5
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
Cross polar ratio (dB)
> 25
> 25
> 25
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
Antenna weight (kg)
13.5
Clamps weight (kg)
3.0 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
665 (at 150 km/h) 345 (at 150 km/h) 880 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1936
22.6 (Included clamps)
1285
Antenna packing weight (kg)
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
15
DX-790-960-65-16.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU-2.0m Model: A794516R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx…...r r - Red
Pattern sample for reference
790 - 960 MHz
16
r
DX-790-960-65-17.5i-M Model: A79451700v02
Single-band
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
17.1
17.3
17.6
16.9 ± 0.4
17.1 ± 0.3
17.4 ± 0.5
> 18
> 18
> 19
Horizontal 3dB beam width (°)
69 ± 1.2
68 ± 1.3
65 ± 3.0
Vertical 3dB beam width (°)
8.3 ± 0.5
7.9 ± 0.5
7.3 ± 0.5
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB)
> 26
> 26
> 26
Cross polar ratio (dB)
> 25
> 25
> 25
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Packing dimensions (H x W x D) (mm)
2815 x 305 x 190
Antenna weight (kg)
15.6
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
25.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
17
DX-790-960-65-17.5i-M Model: A79451700v02
56
70
Unit: mm
790 - 960 X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
18
DX-790-960-65-17.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU-2.6m
Single-band
Model: A794517R0 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt
17.1
17.3
17.6
16.9 ± 0.4
17.1 ± 0.3
17.4 ± 0.5
> 18
> 18
> 19
Horizontal 3dB beam width (°)
69 ± 1.2
68 ± 1.3
65 ± 3.0
Vertical 3dB beam width (°)
8.3 ± 0.5
7.9 ± 0.5
7.3 ± 0.5
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 26
> 26
> 26
Cross polar ratio (dB)
> 25
> 25
> 25
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Packing dimensions (H x W x D) (mm)
2810 x 300 x 190
Antenna weight (kg)
16.5
Clamps weight (kg)
3.0 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2535
26.0 (Included clamps)
Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1735
Antenna packing weight (kg)
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
19
DX-790-960-65-17.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU-2.6m Model: A794517R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r r - Red
Pattern sample for reference
790 - 960 MHz
20
r
DX-790-960-90-15i-M
Single-band
Model: A79451503
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable 15.0
15.2
15.3
14.8 ± 0.3
15.0 ± 0.3
15.0 ± 0.4
> 18
> 18
> 18
86 ± 1.0
85 ± 1.0
85 ± 1.5
10.0 ± 0.4
9.8 ± 0.4
9.3 ± 0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30°(dB) Cross polar ratio (dB)
0°
> 24
> 24
> 24
> 20
> 20
> 20
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
Antenna weight (kg)
13.5
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
22.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
21
DX-790-960-90-15i-M Model: A79451503
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20S11
Remote electrical tilt module, a couple of AISG connectors
0.4 kg
1 (Separate packing)
106
174
790 - 960 X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
22
1936
1285
Unit: mm
DX-790-960-90-15i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.0m Model: A794515R1 Single-band
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
15.0
15.2
15.3
14.8 ± 0.3
15.0 ± 0.3
15.0 ± 0.4
> 18
> 18
> 18
86 ± 1.0
85 ± 1.0
85 ± 1.5
10.0 ± 0.4
9.8 ± 0.4
9.3 ± 0.3
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ±30°(dB)
> 24
> 24
> 24
Cross polar ratio (dB)
> 20
> 20
> 20
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
Antenna weight (kg)
13.7
Clamps weight (kg)
3.0 (2 units)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
665 (at 150 km/h) 345 (at 150 km/h) 880 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
23
1936
22.6 (Included clamps)
Mast diameter supported (mm)
1285
Antenna packing weight (kg)
DX-790-960-90-15i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.0m Model: A794515R1 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r r
r - Red
Pattern sample for reference
790 - 960 MHz
24
DX-790-960-90-17i-M Model: A79451702
Single-band
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt
15.8
16.1
16.3
15.7 ± 0.3
16.0 ± 0.3
16.2 ± 0.4
> 16
> 18
> 18
Horizontal 3dB beam width (°)
86 ± 1.0
85 ± 1.0
85 ± 1.5
Vertical 3dB beam width (°)
8.3 ± 0.4
7.9 ± 0.5
7.4 ± 0.4
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30°(dB) Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 20
> 20
> 20
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Packing dimensions (H x W x D) (mm)
2810 x 300 x 190
Antenna weight (kg)
16.6
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
26.0 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
25
DX-790-960-90-17i-M Model: A79451702
56
Unit: mm
70
790 - 960 X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
26
DX-690-960-65-15i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m Model: A704515R0 Single-band
Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
13.9
14.4
14.6
14.8
13.9 ± 0.3
14.3 ± 0.3
14.5 ± 0.3
14.7 ± 0.4
> 15
> 15
> 15
> 17
69 ± 1.4
68 ± 1.0
67 ± 1.0
65 ± 2.0
16.4 ± 1.0
15.0 ± 1.0
14.5 ± 0.7
13.2 ± 0.9
> 25
> 25
> 25
> 17
> 17
> 17
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB)
> 24
Cross polar ratio (dB)
> 17
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1415 x 298 x 150
Packing dimensions (H x W x D) (mm)
1820 x 360 x 230
Antenna weight (kg)
12.5
Clamps weight (kg)
2.9 (2 units) 21.5 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1280 1415
Antenna packing weight (kg) Mast diameter supported (mm)
Frontal: 550 (at 150 km/h) Lateral: 235 (at 150 km/h) Rear side: 660 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
27
DX-690-960-65-15i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m Model: A704515R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r r - Red
Pattern sample for reference
690 - 960 MHz
28
r
DX-690-960-65-16.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.0m Model: A704516R0 Single-band
Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.5
15.9
16.1
16.4
15.4 ± 0.3
15.7 ± 0.4
15.9 ± 0.5
16.1 ± 0.5
> 15
> 15
> 15
> 15
69 ± 1.0
68 ± 1.2
67 ± 1.2
65 ± 1.8
11.3 ± 0.8
10.3 ± 0.5
9.8 ± 0.6
9.2 ± 0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB)
> 24
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1936 x 298 x 149
Packing dimensions (H x W x D) (mm)
2365 x 360 x 230
Antenna weight (kg)
15.5
Clamps weight (kg)
3.0 (2 units) 26.0 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 810 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 970 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1300 1936
Antenna packing weight (kg)
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
29
DX-690-960-65-16.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.0m Model: A704516R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r r - Red
Pattern sample for reference
690 - 960 MHz
30
r
DX-690-960-65-17.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.6m Model: A704517R0 Single-band
Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt
16.5
16.7
17.0
17.2
16.4 ± 0.3
16.6 ± 0.4
16.7 ± 0.4
16.9 ± 0.5
> 17
> 18
> 18
> 17
Horizontal 3dB beam width (°)
69 ± 1.0
68 ± 1.2
67 ± 1.2
65 ± 2.0
Vertical 3dB beam width (°)
8.7 ± 0.6
8.0 ± 0.5
7.7 ± 0.4
7.2 ± 0.5
> 26
> 26
> 26
> 18
> 18
> 18
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
> 25 0°
> 18
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 298 x 149
Packing dimensions (H x W x D) (mm)
2885 x 365 x 235
Antenna weight (kg)
19.5
Clamps weight (kg)
3.0 (2 units) 32.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 1060 (at 150 km/h) Lateral: 455 (at 150 km/h) Rear side: 1265 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1874 2535
Antenna packing weight (kg)
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
31
DX-690-960-65-17.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.6m Model: A704517R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r r - Red
Pattern sample for reference
690 - 960 MHz
32
r
DX-690-960-33-20.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.6m Model: A704521R0 Single-band
Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable 19.1
19.7
20.0
20.3
19.0 ± 0.5
19.6 ± 0.4
19.9 ± 0.5
20.2 ± 0.3
Side lobe suppression for first side lobe above main beam (dB)
> 19
> 21
> 21
> 19
Azimuth side lobe suppression(dB)
> 18
> 18
> 19
> 19
Horizontal 3dB beam width (°)
35 ± 1.5
32.5 ± 1.0
31.5 ± 1.5
29 ± 1.0
Vertical 3dB beam width (°)
8.8 ± 0.5
8.0 ± 0.5
7.7 ± 0.3
7.2 ± 0.5
at mid Tilt
Gain (dBi)
over all Tilts
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Front to back ratio , ± 30°(dB)
> 32
> 35
> 33
> 32
> 21
> 28
> 26
> 24
Cross polar ratio (dB)
0°
≥ 30
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2580 x 590 x 169
Packing dimensions (H x W x D) (mm)
2875 x 770 x 300
Antenna weight (kg)
45
Clamps weight (kg)
5.8 (2 units)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2580
64.4 (Included clamps)
Mast diameter supported (mm)
Frontal: 1885 (at 150 km/h) Lateral: 255 (at 150 km/h) Rear side: 1730 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1888
Antenna packing weight (kg)
144
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
33
DX-690-960-33-20.5i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 2.6m Model: A704521R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r r - Red
Pattern sample for reference
690 - 960 MHz
34
r
DX-1710-2170-90-17i-M Model: A19451703
Single-band
Antenna Specifications Electrical Properties Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
+45° , -45°
VSWR
≤ 1.4 (°)
Gain
2
6
10
2
6
10
2
6
10
16.3
16.5
16.2
16.5
16.7
16.4
16.7
17.0
16.5
(°)
2
6
10
2
6
10
2
6
10
(dB)
18
17
16
18
17
16
18
17
16
(dBi)
Side lobe suppression for first side lobe above horizon Horizontal 3dB beam width (°)
84
Vertical 3dB beam width (°)
7.5
Isolation between ports (dB)
86
6.5
6.0
≥ 30
Front to back ratio, copolar (dB) Cross polar ratio (dB)
88
≥ 25 0° ± 60°
≥ 18 ≥ 10
Electrical downtilt (°)
2 - 10
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Max. CW input power (W)
300
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties Dimensions (H x W x D) (mm)
1306 x 155 x 79
Packing dimensions (H x W x D) (mm)
1770 x 260 x 160
Net weight (kg)
6.5
Bracket weight (kg)
3.0
Packing weight (kg)
11.8
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Operating temperature (℃) Wind load frontal (N) Wind load lateral (N) Wind load rear side (N) Max. wind velocity (km/h) Connector
-55 - +65 150 (v=150 km/h) 110 (v=150 km/h) 225 (v=150 km/h) 200
1710 - 2170 X +45°
-45°
2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
Pattern sample for reference
1710 - 1880 MHz
1850 - 1990 MHz
1920 - 2170 MHz
35
DX-1710-2170-33-21i-M Model: A19452101
Antenna Specifications Electrical Properties Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
+45° , -45°
VSWR
≤ 1.45 (°)
Gain
2
6
10
2
6
10
2
6
10
20.0
20.1
20.1
20.3
20.5
20.1
20.7
20.5
19.8
(°)
2
6
10
2
6
10
2
6
10
(dB)
18
17
16
18
17
16
18
17
16
(dBi)
Side lobe suppression for first side lobe above horizon Horizontal 3dB beam width (°)
35
Vertical 3dB beam width (°)
7.2
Isolation between ports (dB)
33
31
6.6
6.2
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
Typ. 20
Electrical downtilt (°)
2 - 10
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Max. CW input power (W)
300
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties Dimensions (H x W x D) (mm)
1318 x 289 x 85
Packing dimensions (H x W x D) (mm)
1662 x 405 x 175
Net weight (kg)
11.4
Bracket weight (kg)
4.6
Packing weight (kg)
18.4
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Operating temperature (℃) Wind load frontal (N) Wind load lateral (N) Wind load rear side (N) Max. wind velocity (km/h) Connector
1710 - 2170 X
-55 - +65 285 (v=150 km/h) 120 (v=150 km/h) 425 (v=150 km/h)
+45°
200
7/16 (F)
2 x 7/16 DIN Female
Pattern sample for reference
1710 - 1880 MHz
36
1850 - 1990 MHz
1920 - 2170 MHz
-45°
7/16 (F)
DX-1710-2200-65-15.5i-M Model: A19451505
Single-band
Antenna Specifications Electrical Properties 1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.4
15.5
15.7
15.7
15.3 ±0.3
15.4 ±0.3
15.6 ±0.4
15.6 ±0.3
> 17
> 18
> 18
> 15
67 ±2.6
64 ±2
61 ±3.3
60 ±1.8
13.9 ±0.7
13.0 ±0.5
12.6 ±0.8
11.5 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 24
> 24
> 22
> 22
> 22
> 22
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
702 x 155 x 89
Packing dimensions (H x W x D) (mm)
1025 x 195 x 155
Antenna weight (kg)
4.3
Clamps weight (kg)
2.0 (2 units)
Antenna packing weight (kg)
7.8 (Included clamps)
Mast diameter supported (mm)
38 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 150 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 175 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0° - 20 °
0.6 kg
1 (Separate packing)
37
DX-1710-2200-65-15.5i-M Model: A19451505
34
46
Unit: mm
34
1710 - 2200 X +45°
7/16 (F)
-45° 7/16 (F)
Pattern sample for reference
1710 - 2200 MHz
38
DX-1710-2200-65-18i-M Model: A19451811v01
Single-band
Antenna Specifications Electrical Properties 1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt
17.4
17.8
18.0
17.9
17.2 ± 0.4
17.6 ± 0.4
17.7 ± 0.4
17.8 ± 0.4
> 19
> 19
> 18
> 17
Horizontal 3dB beam width (°)
68 ± 1.5
67 ± 1.5
66 ± 2
63 ± 2
Vertical 3dB beam width (°)
7.4 ± 0.4
6.9 ± 0.4
6.5 ± 0.4
6.0 ± 0.3
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5 ≥ 30
Cross polar isolation (dB) Front to back ratio, ±30°(dB)
> 28
> 28
> 27
> 27
Cross polar ratio (dB)
> 22
> 22
> 22
> 18
0°
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 155 x 89
Packing dimensions (H x W x D) (mm)
1695 x 195 x 155
Antenna weight (kg)
6.1
Clamps weight (kg)
2.0 (2 units)
Antenna packing weight (kg)
10.6 (Included clamps)
Mast diameter supported (mm)
38 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 330 (at 150 km/h) Lateral: 165 (at 150 km/h) Rear side: 375 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0 - 12 °
0.6 kg
1 (Separate packing)
39
DX-1710-2200-65-18i-M Model: A19451811v01
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20S11
Remote electrical tilt module, a couple of AISG connectors
0.4 kg
1 (Separate packing)
64
60
1710 - 2200 X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
1710 - 2200 MHz
40
1392
1424
1365
Unit: mm
DX-1710-2200-65-18i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m Model: A194518R0v01 Single-band
Antenna Specifications Electrical Properties 1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
1920 - 2170
Polarization
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable 17.4
17.8
18.0
17.9
17.2 ± 0.4
17.6 ± 0.4
17.7 ± 0.4
17.8 ± 0.4
> 19
> 19
> 18
> 17
Horizontal 3dB beam width (°)
68 ± 1.5
67 ± 1.5
66 ± 2
63 ± 2
Vertical 3dB beam width (°)
7.4 ± 0.4
6.9 ± 0.4
6.5 ± 0.4
6.0 ± 0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5 ≥ 30
Cross polar isolation (dB) Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
0°
> 28
> 28
> 27
> 27
> 22
> 22
> 22
> 18
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 64
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 155 x 89
Packing dimensions (H x W x D) (mm)
1695 x 195 x 155
Antenna weight (kg)
6.4
Clamps weight (kg)
2.0 (2 units)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
330 (at 150 km/h) 165 (at 150 km/h) 375 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1392
38 - 115
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0 - 12 °
0.6 kg
1 (Separate packing)
41
1424
10.9 (Included clamps)
Mast diameter supported (mm)
1365
Antenna packing weight (kg)
DX-1710-2200-65-18i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m Model: A194518R0v01 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...b b - Blue
Pattern sample for reference
1710 - 2200 MHz
42
b
DX-1710-2200-65-19.5i-M Model: A19451902
Single-band
Antenna Specifications Electrical Properties 1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 6 , continuously adjustable 18.7
19.1
19.4
19.5
18.6 ±0.4
19.0 ±0.5
19.2 ±0.4
19.2 ±0.5
> 17
> 17
> 18
> 17
Horizontal 3dB beam width (°)
67 ±2.5
64 ±1.8
62 ±4.3
60 ±1.0
Vertical 3dB beam width (°)
5.0 ±0.3
4.7 ±0.2
4.5 ±0.3
4.1 ±0.2
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 27
> 27
> 27
> 27
> 25
> 25
> 25
> 25
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1954 x 155 x 89
Packing dimensions (H x W x D) (mm)
2280 x 195 x 155
Antenna weight (kg)
8.4
Clamps weight (kg)
2.0 (2 units)
Antenna packing weight (kg)
13.1 (Included clamps)
Mast diameter supported (mm)
38 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 505 (at 150 km/h) Lateral: 250 (at 150 km/h) Rear side: 575 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0 - 8 °
0.6 kg
1 (Separate packing)
43
DX-1710-2200-65-19.5i-M Model: A19451902
34
46
34
Unit: mm
1710 - 2200 X +45°
7/16 (F)
-45° 7/16 (F)
Pattern sample for reference
1710 - 2200 MHz
44
DX-1710-2690-65-16i-M Model: A26451500
Single-band
Antenna Specifications Electrical Properties 1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.2
16.0
16.3
16.1
15.2 ± 0.5
15.9 ± 0.5
16.2 ± 0.5
16.0 ± 0.5
> 18
> 18
> 17
> 17
67 ± 2.5
64 ± 4.6
60 ± 3.4
60 ± 3.6
12.0 ± 0.9
11.0 ± 0.9
9.6 ± 0.9
8.6 ± 0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 24
> 24
> 24
> 24
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
841 x 155 x 109
Packing dimensions (H x W x D) (mm)
1175 x 210 x 190
Antenna net weight (kg)
5.5
Clamps weight (kg)
2.0 (2 units)
Antenna packing weight (kg)
10.0 (Included clamps)
Mast diameter supported (mm)
38 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 120 (at 150 km/h) Lateral: 110 (at 150 km/h) Rear side: 215 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0° - 20 °
0.6 kg
1 (Separate packing)
45
DX-1710-2690-65-16i-M Model: A26451500
56
Unit: mm 57
1710 - 2690 X +45°
7/16 (F)
-45°
7/16 (F)
Pattern sample for reference
1710 - 2200 MHz
46
2200 - 2690 MHz
DX-1710-2690-65-18i-M Model: A26451800v02
Single-band
Antenna Specifications Electrical Properties 1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable 17.4
18.0
18.5
18.6
17.2 ±0.3
17.6 ±0.5
18.3 ±0.4
18.4 ±0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam width (°)
68 ±2.0
65 ±2.4
62 ±2.7
60 ±1.5
Vertical 3dB beam width (°)
6.8 ±0.4
6.1 ±0.4
5.5 ±0.4
5.0 ±0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 28
> 29
> 29
> 29
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 155 x 89
Packing dimensions (H x W x D) (mm)
1695 x 195 x 155
Antenna weight (kg)
6.9
Clamps weight (kg)
2.0 (2 units)
Antenna packing weight (kg)
11.4 (included clamps)
Mast diameter supported (mm)
38 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
330 (at 150 km/h) 165 (at 150 km/h) 375 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0 - 12 °
0.6 kg
1 (Separate packing)
47
DX-1710-2690-65-18i-M Model: A26451800v02
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20S11
Remote electrical tilt module, a couple of AISG connectors
0.4 kg
1 (Separate packing)
60
1710 - 2690 X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
1710 - 2690 MHz
48
1392
1424
Unit: mm
1365
64
DX-1710-2690-65-18i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m Model: A264518R0v01 Single-band
Antenna Specifications Electrical Properties 1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
Polarization
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable 17.4
18.0
18.5
18.6
17.2 ±0.3
17.6 ±0.5
18.3 ±0.4
18.4 ±0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam width (°)
68 ±2.0
65 ±2.4
62 ±2.7
60 ±1.5
Vertical 3dB beam width (°)
6.8 ±0.4
6.1 ±0.4
5.5 ±0.4
5.0 ±0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 28
> 29
> 29
> 29
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
64
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 155 x 89
Packing dimensions (H x W x D) (mm)
1695 x 195 x 155
Antenna weight (kg)
7.2
Clamps weight (kg)
2.0 (2 units)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
330 (at 150 km/h) 165 (at 150 km/h) 375 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1392
38 - 115
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0 - 12 °
0.6 kg
1 (Separate packing)
49
1424
11.7 (included clamps)
Mast diameter supported (mm)
1365
Antenna packing weight (kg)
DX-1710-2690-65-18i-M-R
EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m Model: A264518R0v01 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...y y - Yellow
Pattern sample for reference
1710 - 2690 MHz
50
y
DX-450-470-65-15i-0F Model: A45451500
Single-band
Antenna Specifications Electrical Properties Frequency range (MHz)
450 - 470
Polarization
+45° , -45°
VSWR
≤ 1.5
Gain (dBi)
15
Horizontal 3dB beam width (°)
65
Vertical 3dB beam width (°)
16
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
≥ 25
Cross polar ratio (dB)
≥ 15
Electrical downtilt (°)
0
Intermodulation IM5 (dBc)
≤ -160 (2 x 43 dBm carrier)
Max. CW input power (W)
500
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties Dimensions (H x W x D) (mm)
2042 x 486 x 98
Packing dimensions (H x W x D) (mm)
2267 x 598 x 269
Net weight (kg)
28.3
Bracket weight (kg)
6.5
Packing weight (kg)
41.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Operating temperature (℃)
-55 - +65
Wind load frontal (N) Wind load lateral (N) Wind load rear side (N) Max. wind velocity (km/h) Connector
740 (v=150 km/h) 220 (v=150 km/h) 1100 (v=150 km/h)
450 - 470 X +45°
-45°
200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
Pattern sample for reference
450 - 460 MHz
455 - 465 MHz
460 - 470 MHz
51
Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Range (MHz) beam width (°) downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
790-862/ 880-960
65/65
14.5/15
0-14/0-14
EasyRET2.0
4 x 7/16 DIN-F
1490 x 298 x 150
ADU4515R0v01
55
D
790-862/ 880-960
65/65
16/16.5
0-12/0-12
EasyRET2.0
4 x 7/16 DIN-F
1999 x 259 x 150
ADU4516R0v01
57
D
790-862/ 880-960
65/65
17/17.5
0-10/0-10
EasyRET2.0
4 x 7/16 DIN-F
2538 x 259 x 150
ADU4517R0v01
59
D
690-960/ 690-960
65/65
15/15
0-14/0-14
EasyRET2.0
4 x 7/16 DIN-F
1499 x 429 x 196
**ADU4515R5
61
E
790-960/ 790-960
65/65
16/16
0-10/0-10
EasyRET2.0
4 x 7/16 DIN-F
1999 x 429 x 196
**ADU4516R7
62
E
690-960/ 690-960
65/65
16/16
0-12/0-12
EasyRET2.0
4 x 7/16 DIN-F
2099 x 429 x 196
**ADU4516R6
64
E
690-960/ 690-960
65/65
17/17
0-10/0-10
EasyRET2.0
4 x 7/16 DIN-F
2769 x 429 x 196
**ADU4517R6
65
E
790-960/ 1710-2180
65/65
15/17.5
0-14/0-10
MET1.0
4 x 7/16 DIN-F
1360 x 259 x 135
ADU451503
66
F
790-960/ 1710-2180
65/65
15/17.5
0-14/0-10
EasyRET2.0
4 x 7/16 DIN-F
1360 x 259 x 135
ADU4517R3
68
F
790-960/ 1710-2180
65/65
16.5/18.5
0-12/0-8
MET1.0
4 x 7/16 DIN-F
1936 x 259 x 135
ADU451602v01
70
F
790-960/ 1710-2180
65/65
16.5/18.5
0-12/0-8
EasyRET1.0
4 x 7/16 DIN-F
1936 x 259 x 135
ADU4518R3
72
F
790-960/ 1710-2180
65/65
17.5/18.5
0-10/0-8
MET1.0
4 x 7/16 DIN-F
2535 x 259 x 135
ADU451807v01
74
F
790-960/ 1710-2180
65/65
17.5/18.5
0-10/0-8
EasyRET1.0
4 x 7/16 DIN-F
2535 x 259 x 135
ADU4518R0
76
F
790-960/ 1710-2180
65/65
15/17.5
0-14/0-10
MET1.0+ Combiner
2 x 7/16 DIN-F
1360 x 259 x 135
ADU4517C0
78
F
790-960/ 1710-2180
65/65
16.5/18.5
0-12/0-8
MET1.0+ Combiner
2 x 7/16 DIN-F
1936 x 259 x 135
ADU4518C1
80
F
790-960/ 1710-2180
65/65
17.5/18.5
0-10/0-8
MET1.0+ Combiner
2 x 7/16 DIN-F
2535 x 259 x 135
ADU4518C0
82
F
790-960/ 1710-2180
65/65
17.5/18
0-10/0-10
MET1.0
4 x 7/16 DIN-F
2535 x 259 x 135
ADU451720
84
F
790-960/ 1710-2690
65/65
15/17.5
0-15/2-12
MET2.0
4 x 7/16 DIN-F
1499 x 259 x 135
ADU451716v01
86
G
790-960/ 1710-2690
65/65
15/17.5
0-15/2-12
EasyRET2.0
4 x 7/16 DIN-F
1499 x 259 x 135
ADU4518R10
88
G
790-960/ 1710-2690
65/65
16/18
0-12/2-12
MET2.0
4 x 7/16 DIN-F
2087 x 259 x 135
ADU451604v01
90
G
Dual-band
B - 2. Dual-band Antenna
B - 2. Dual-band Antenna
Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Range (MHz) beam width (°) downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
790-960/ 1710-2690
65/65
16/18
0-12/2-12
EasyRET2.0
4 x 7/16 DIN-F
2087 x 259 x 135
ADU4518R11
92
G
790-960/ 1710-2690
65/65
17/18
0-10/2-12
MET2.0
4 x 7/16 DIN-F
2555 x 259 x 135
ADU451712v01
94
G
790-960/ 1710-2690
65/65
17/18
0-10/2-12
EasyRET2.0
4 x 7/16 DIN-F
2555 x 259 x 135
ADU4518R12
96
G
690-960/ 1710-2690
65/65
15/17.5
0-15/2-12
EasyRET2.0
4 x 7/16 DIN-F
1499 x 259 x 135
ADU4518R9
98
G
690-960/ 1710-2690
65/65
16/18
0-12/2-12
EasyRET2.0
4 x 7/16 DIN-F
2087 x 259 x 135
ADU4518R7
100
G
690-960/ 1710-2690
65/65
17/18
0-10/2-12
EasyRET2.0
4 x 7/16 DIN-F
2555 x 259 x 135
ADU4518R8
102
G
1710-2200/ 1710-2200
65/65
18/18
0-10/0-10
MET2.0
4 x 7/16 DIN-F
1365 x 269 x 86
ADU451819v01
104
H
1710-2200/ 1710-2200
65/65
18/18
0-10/0-10
EasyRET2.0
4 x 7/16 DIN-F
1365 x 269 x 86
ADU4518R1v01
106
H
1710-2200/ 1710-2200
65/65
19.5/19.5
0-6/0-6
MET1.0
4 x 7/16 DIN-F
1954 x 323 x 89
ADU451902
108
H
1710-2170/ 2490-2690
65/65
18/18
0-12/0-12
EasyRET1.0
4 x 7/16 DIN-F
1490 x 155 x 109
ADU4518R5
110
J
1710-2690/ 1710-2690
65/65
16/16
0-14/0-14
MET1.0
4 x 7/16 DIN-F
840 x 299 x 109
ADU451507
112
I
1710-2690/ 1710-2690
65/65
18/18
0-12/0-12
MET2.0
4 x 7/16 DIN-F
1365 x 269 x 86
ADU451816v02
114
I
1710-2690/ 1710-2690
65/65
18/18
0-12/0-12
EasyRET2.0
4 x 7/16 DIN-F
1365 x 269 x 86
ADU4518R6v01
116
I
** Preliminary Issue
Array Symbol Type Type D
r
rr
Type E
Lr1
Rr2
2 Filtered low-bands Low-bands array (Dipole reuse) side-by-side
Type F
Type G
b
y
r
r
Type H
bL
bbR
High-bands array side-by-side
Type I
yL
yyR
Type J
b
y
High-bands array 2 Filtered high-bands side-by-side (Dipole reuse)
DXX-790-862/880-960-65/65-14.5i/15i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4515R0v01 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862
880 - 960 +45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable, each band separately 14.3
14.8
14.2 ± 0.3
14.7 ± 0.3
> 17
> 17
65 ± 2.0
61 ± 2.0
13.5 ± 0.8
12.1 ± 0.8
at mid Tilt
Gain (dBi)
Dual-band
Polarization
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5 ≥ 30
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
> 24
> 23
> 25
> 23
Max. power per input (W)
400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1490 x 298 x 150
Packing dimensions (H x W x D) (mm)
1820 x 360 x 230
Antenna weight (kg)
18.0
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
27.5 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey -40 .. +65 Frontal: 580 (at 150 km/h) Lateral: 250 (at 150 km/h) Rear side: 695 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1389
Operational temperature (℃)
1490
Mast diameter supported (mm)
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
55
DXX-790-862/880-960-65/65-14.5i/15i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4515R0v01 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx…..rr r - Red
Pattern sample for reference
790 - 862 MHz
56
880 - 960 MHz
r
rr
DXX-790-862/880-960-65/65-16i/16.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4516R0v01 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862
880 - 960 +45° , -45°
Electrical downtilt (°)
Dual-band
Polarization
0 - 12 , continuously adjustable, each band separately at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.8
16.3
15.6 ± 0.3
16.0 ± 0.3
> 17
> 17
68 ± 2.0
65 ± 2.0
10.5 ± 0.5
9.4 ± 0.5
VSWR
< 1.5 ≥ 30
Cross polar isolation (dB)
≥30
Interband isolation (dB)
≥ 30
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
> 24
> 24
> 25
> 26
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 259 x 150
Packing dimensions (H x W x D) (mm)
2290 x 305 x 205
Antenna weight (kg)
21.7
Clamps weight (kg)
3.0 (2 units) 30.0 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1887 1999
Antenna packing weight (kg)
Frontal: 700 (at 150 km/h) Lateral: 320 (at 150 km/h) Rear side: 805 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
57
DXX-790-862/880-960-65/65-16i/16.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4516R0v01 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r
HWMxxx…..rr r
r - Red
Pattern sample for reference
790 - 862 MHz
58
880 - 960 MHz
rr
DXX-790-862/880-960-65/65-17i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4517R0v01 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862
880 - 960 +45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable, each band separately 16.8
17.3
16.5 ± 0.4
17.1 ± 0.5
> 18
> 18
Horizontal 3dB beam width (°)
68 ± 2.0
65 ± 2.0
Vertical 3dB beam width (°)
8.3 ± 0.6
7.2 ± 0.6
at mid Tilt
Gain (dBi)
Dual-band
Polarization
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
≥ 30
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 25
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2538 x 259 x 150
Packing dimensions (H x W x D) (mm)
2960 x 305 x 205
Antenna weight (kg)
25.5
Clamps weight (kg)
3.6 (2 units) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2538
36.8 (Included clamps)
Frontal: 920 (at 150 km/h) Lateral: 420 (at 150 km/h) Rear side: 1055 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1887
Antenna packing weight (kg) Mast diameter supported (mm)
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8°
2.1 kg
1 (Separate packing)
59
DXX-790-862/880-960-65/65-17i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4517R0v01 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx…..rr r
r - Red
Pattern sample for reference
790 - 862 MHz
60
880 - 960 MHz
rr
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R EasyRET Dual-Band Antenna with Integrated RCUs - 1.4m Model: ADU4515R5 Preliminary Issue Antenna Specifications Electrical Properties 2 x (690 - 960)
Electrical downtilt (°)
0 - 14
Gain (dBi)
14.5
Side lobe suppression for first side lobe above main beam (Typ.) (dB)
15
Horizontal 3dB beam width (°)
65
Vertical 3dB beam width (°)
13
VSWR
< 1.5
Front to back ratio, copolar (dB) Cross polar ratio (dB)
Dual-band
Frequency range (MHz)
Typ. 25 0°
Typ. 17
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1499 x 429 x 196
Packing dimensions (H x W x D) (mm)
1695 x 530 x 270
Antenna net weight (kg)
23.5
Mechanical downtilt (°)
0 - 16
Connector RET type RET protocols
4 x 7/16 DIN Female Integrated RET AISG 2.0 / 3GPP
61
DXX-790-960/790-960-65/65-16i/16i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4516R7 Preliminary Issue Antenna Specifications Electrical Properties 2 x (790 - 960)
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately 15.5
15.8
16.0
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
> 20
> 18
> 17
Horizontal 3dB beam width (°)
68 ±5.0
65 ±5.0
60 ±5.0
Vertical 3dB beam width (°)
9.5 ± 0.8
9.2 ± 0.7
8.5 ± 0.7
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 24
> 25
> 26
> 17
> 17
> 18
Max. power per input (W)
400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 106
2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2195 x 530 x 270
Antenna weight (kg)
28.8
Clamps weight (kg)
3.6 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 910 (at 150 km/h) Lateral: 265 (at 150 km/h) Rear side: 910 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
62
1999
42.5 (Included clamps)
1273
Antenna packing weight (kg)
DXX-790-960/790-960-65/65-16i/16i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4516R7 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
Dual-band
RET protocols*
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM Integrated RET S/N: HWMxxx……Lr1
HWMxxx……Rr2 r - Red L - Left array
Lr1
Rr2
R - Right array
Pattern sample for reference
790 - 960 MHz
63
DXX-690-960/690-960-65/65-16i/16i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4516R6 Preliminary Issue Antenna Specifications Electrical Properties Frequency range (MHz)
2 x (690 - 960)
Electrical downtilt (°)
0 - 10
Gain (dBi)
16.0
Side lobe suppression for first side lobe above main beam (Typ.) (dB)
16
Horizontal 3dB beam width (°)
65
Vertical 3dB beam width (°)
9
VSWR
< 1.5
Front to back ratio, copolar (dB) Cross polar ratio (dB)
Typ. 25 0°
Intermodulation IM3 (dBc)
Typ. 17 ≤ -153 (2 x 43 dBm carrier)
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2099 x 429 x 196
Packing dimensions (H x W x D) (mm)
2290 x 520 x 270
Antenna net weight (kg)
25
Mechanical downtilt (°)
0 - 16
Connector RET type RET protocols
64
4 x 7/16 DIN Female Integrated RET AISG 2.0 / 3GPP
DXX-690-960/690-960-65/65-17i/17i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4517R6 Preliminary Issue Antenna Specifications
Frequency range (MHz)
2 x (690 - 960)
Electrical downtilt (°)
0 - 10
Gain (dBi)
17.0
Side lobe suppression for first side lobe above main beam (Typ.) (dB)
16
Horizontal 3dB beam width (°)
65
Vertical 3dB beam width (°)
8
VSWR
< 1.5
Front to back ratio, copolar (dB) Cross polar ratio (dB)
Dual-band
Electrical Properties
Typ. 25 0°
Intermodulation IM3 (dBc)
Typ. 17 ≤ -153 (2 x 43 dBm carrier)
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2769 x 429 x 196
Packing dimensions (H x W x D) (mm)
2980 x 520 x 270
Antenna net weight (kg)
28
Mechanical downtilt (°)
0 - 12
Connector RET type RET protocols
4 x 7/16 DIN Female Integrated RET AISG 2.0 / 3GPP
65
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M Model: ADU451503
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 10 , continuously adjustable
14.6
15.0
15.1
16.8
17.3
17.6
14.5 ±0.3
14.8 ±0.3
14.9 ±0.4
16.7 ±0.4
17.1 ±0.6
17.4 ±0.6
> 18
> 17
> 16
> 18
> 18
> 17
69 ±3.0
66 ±4.1
64 ±3.2
65 ±2.0
63 ±2.2
60±3.2
15.7 ±0.8
15.0 ±0.6
14.0 ±0.7
7.6 ±0.4
7.1 ±0.4
6.6 ±0.7
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 40 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 24
> 24
> 25
> 25
> 25
> 25
> 25
> 25
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1360 x 259 x 135
Packing dimensions (H x W x D) (mm)
1640 x 305 x 190
Antenna weight (kg)
13.7
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
20.4 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
66
1850 - 1990
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M
Dual-band
Model: ADU451503
56
55
Unit: mm
70
790 - 960 X
1710 - 2180 X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
67
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4517R3 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 10 , continuously adjustable
14.5
14.7
15.0
16.8
17.3
17.6
14.5 ±0.5
14.7 ±0.4
14.9 ±0.4
16.8 ±0.5
17.1 ±0.5
17.4 ±0.4
> 18
> 18
> 16
> 17
> 17
> 17
69 ±1.1
66 ±1.3
64 ±2.7
65 ±2.1
63 ±1.4
60±3.7
15.7 ±0.8
15.0 ±0.9
14.0 ±1.0
7.5 ±0.4
7.1 ±0.3
6.6 ±0.5
< 1.5
VSWR Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 24
> 24
> 25
> 25
> 25
> 25
> 25
> 25
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1360 x 259 x 135
Packing dimensions (H x W x D) (mm)
1655 x 315 x 195
Antenna weight (kg)
14.3
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
21.1 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
440 (at 150 km/h) 230 (at 150 km/h) 555 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16°
1.3 kg
1 (Separate packing)
1248 1360
Mast diameter supported (mm)
68
106
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4517R3 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx……b r - Red
b
b - Blue
r
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
69
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M Model: ADU451602v01
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 8 , continuously adjustable
15.7
16.0
16.0
18.5
18.7
18.7
15.6 ±0.4
15.8 ±0.3
15.9 ±0.3
18.4 ±0.4
18.6 ±0.4
18.5 ±0.5
> 17
> 17
> 17
> 18
> 18
> 18
69 ±1.5
66 ±1.5
64 ±1.5
65 ±2.5
63 ±2.5
60±1.5
10.6 ±0.5
10.2 ±0.5
9.5 ±0.5
5.2 ±0.3
5.0 ±0.3
4.7 ±0.3
< 1.5
VSWR Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 40 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available. Mechanical Properties Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
Antenna weight (kg)
17.3
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
25.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 12 °
1.3 kg
1 (Separate packing)
70
1850 - 1990
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M
Dual-band
Model: ADU451602v01
56
55
70
790 - 960 X
Unit: mm
1710 - 2180 X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
71
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4518R3 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 8 , continuously adjustable
15.7
16.0
16.0
18.5
18.7
18.7
15.6 ±0.4
15.8 ±0.3
15.9 ±0.3
18.4 ±0.4
18.6 ±0.4
18.5 ±0.5
> 17
> 17
> 17
> 18
> 18
> 18
69 ±1.5
66 ±1.5
64 ±1.5
65 ±2.5
63 ±2.5
60±1.5
10.6 ±0.5
10.2 ±0.5
9.5 ±0.5
5.2 ±0.3
5.0 ±0.3
4.7 ±0.3
< 1.5
VSWR Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 40 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 24
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Max. power per input (W) Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
Antenna weight (kg)
18.3
Clamps weight (kg)
2.9 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1936
26.3 (Included clamps)
Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 12 °
1.3 kg
1 (Separate packing)
72
1828
Antenna packing weight (kg)
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4518R3 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx…r HWMxxx…b b
r - Red
b - Blue
r
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
73
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M Model: ADU451807v01
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt
0 - 8 , continuously adjustable
16.7
17.0
17.2
18.4
18.6
18.6
16.6 ±0.4
16.9 ±0.3
17.0 ±0.3
18.2 ±0.4
18.4 ±0.4
18.3 ±0.5
> 19
> 19
> 19
> 16
> 16
> 18
Horizontal 3dB beam width (°)
69 ±1.5
66 ±1.5
65 ±1.0
64 ±1.5
62 ±1.5
60±2.0
Vertical 3dB beam width (°)
8.4 ±0.5
8.0 ±0.5
7.5 ±0.5
5.2 ±0.3
4.9 ±0.3
4.6 ±0.4
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
< 1.5
VSWR Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 40 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 25
> 25
> 26
> 30
> 30
> 30
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Packing dimensions (H x W x D) (mm)
2815 x 305 x 190
Antenna weight (kg)
21
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
31.2 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
1.9 kg
1 (Separate packing)
74
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M
Dual-band
Model: ADU451807v01
56
55
70
Unit: mm
790 - 960 X
1710 - 2180 X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
75
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4518R0 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
0 - 8 , continuously adjustable
16.7
17.0
17.2
18.4
18.6
18.6
16.6 ±0.4
16.9 ±0.3
17.0 ±0.3
18.2 ±0.4
18.4 ±0.4
18.3 ±0.5
> 19
> 19
> 19
> 16
> 16
> 18
Horizontal 3dB beam width (°)
69 ±1.5
66 ±1.5
65 ±1.0
64 ±1.5
62 ±1.5
60±2.0
Vertical 3dB beam width (°)
8.4 ±0.5
8.0 ±0.5
7.5 ±0.5
5.2 ±0.3
4.9 ±0.3
4.6 ±0.4
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
< 1.5
VSWR Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 40 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 25
> 25
> 26
> 30
> 30
> 30
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Max. power per input (W) Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Packing dimensions (H x W x D) (mm)
2815 x 305 x 190
Antenna weight (kg)
22.2
Clamps weight (kg)
3.0 (2 units) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
76
2535
32.5 (Included clamps)
Mast diameter supported (mm)
2426
Antenna packing weight (kg)
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4518R0 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N:
HWMxxx…r HWMxxx…b r - Red
b
b - Blue r
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
77
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-C Model: ADU4517C0
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization 0 - 14 , continuously adjustable at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
14.5
14.7
15.0
16.8
17.3
17.6
14.5 ±0.5
14.7 ±0.4
14.9 ±0.4
16.8 ±0.5
17.1 ±0.5
17.4 ±0.4
> 18
> 18
> 16
> 17
> 17
> 17
69 ±1.1
66 ±1.3
64 ±2.7
65 ±2.1
63 ±1.4
60±3.7
15.7 ±0.8
15.0 ±0.9
14.0 ±1.0
7.5 ±0.4
7.1 ±0.3
6.6 ±0.5
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 24
> 24
> 25
> 25
> 25
> 25
> 25
> 25
> 20
> 20
> 20
200 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1360 x 259 x 135
Packing dimensions (H x W x D) (mm)
1640 x 305 x 190
Antenna weight (kg)
13.7
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
21.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector position
78
1920 - 2180
0 - 10 , continuously adjustable
VSWR
Connector
1850 - 1990
+45° , -45°
Electrical downtilt (°) Gain (dBi)
1710 - 1880
2 x 7/16 DIN Female Bottom
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-C Model: ADU4517C0
Accessories Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
Dual-band
Item
54
Unit: mm 70
70
790 - 960 X +45°
1710 - 2180 X
-45°
+45°
-45°
C
C
7/16 (F)
7/16 (F)
Pattern sample for reference
790- 960 MHz
1710- 2180 MHz
79
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-C Model: ADU4518C1
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 8 , continuously adjustable
15.7
16.0
16.0
18.5
18.7
18.7
15.6 ±0.4
15.8 ±0.3
15.9 ±0.3
18.4 ±0.4
18.6 ±0.4
18.5 ±0.5
> 17
> 17
> 17
> 18
> 18
> 18
69 ±1.5
66 ±1.5
64 ±1.5
65 ±2.5
63 ±2.5
60±1.5
10.6 ±0.5
10.2 ±0.5
9.5 ±0.5
5.2 ±0.3
5.0 ±0.3
4.7 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 20
> 20
> 20
200 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
Antenna weight (kg)
17.3
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
27.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 12 °
1.3 kg
1 (Separate packing)
80
1850 - 1990
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-C
Dual-band
Model: ADU4518C1
54
70
Unit: mm
70
790 - 960 X +45°
-45°
1710 - 2180 X +45°
-45°
C
C
7/16 (F)
7/16 (F)
Pattern sample for reference
790- 960 MHz
1710 - 2180 MHz
81
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-C Model: ADU4518C0
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt
0 - 8 , continuously adjustable
16.7
17.0
17.2
18.4
18.6
18.6
16.6 ±0.4
16.9 ±0.3
17.0 ±0.3
18.2 ±0.4
18.4 ±0.4
18.3 ±0.5
> 19
> 19
> 19
> 16
> 16
> 18
Horizontal 3dB beam width (°)
69 ±1.5
66 ±1.5
65 ±1.0
64 ±1.5
62 ±1.5
60 ±2.0
Vertical 3dB beam width (°)
8.4 ±0.5
8.0 ±0.5
7.5 ±0.5
5.2 ±0.3
4.9 ±0.3
4.6 ±0.4
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
< 1.5
VSWR Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 25
> 25
> 26
> 30
> 30
> 30
> 20
> 20
> 20
200 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Packing dimensions (H x W x D) (mm)
2815 x 305 x 190
Antenna weight (kg)
20.8
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
30.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
82
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-C
Dual-band
Model: ADU4518C0
54
70
70
790 - 960 X +45°
-45°
Unit: mm
1710 - 2180 X +45°
-45°
C
C
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
83
DXX-790-960/1710-2180-65/65-17.5i/18i-M/M Model: ADU451720
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately at mid Tilt
16.7
17.0
17.2
17.7
17.8
18.0
16.6 ±0.4
16.8 ±0.4
17.0 ±0.4
17.5 ±0.4
17.6 ±0.5
17.8 ±0.5
> 19
> 19
> 19
> 18
> 18
> 18
Horizontal 3dB beam width (°)
69 ±1.0
66 ±1.2
65 ±1.4
64 ±4.3
62 ±3.1
60±2.4
Vertical 3dB beam width (°)
8.4 ±0.4
8.0 ±0.4
7.5 ±0.5
7.0 ±0.4
6.5 ±0.3
6.1 ±0.5
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
< 1.5
VSWR Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 40 (790 - 960 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 26
> 26
> 26
> 30
> 30
> 30
> 18
> 18
> 18
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Packing dimensions (H x W x D) (mm)
2810 x 300 x 190
Antenna weight (kg)
21.3
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
32.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
84
DXX-790-960/1710-2180-65/65-17.5i/18i-M/M
Dual-band
Model: ADU451720
56
55
70
790 - 960 X
Unit: mm
1710 - 2180 X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2180 MHz
85
DXX-790-960/1710-2690-65/65-15i/17.5i-M/M Model: ADU451716v01
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2690
824 - 894
880 - 960
1710 - 1990
Polarization
1920 - 2200
Electrical downtilt (°)
0 - 15 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2490 - 2690
2 - 12 , continuously adjustable
14.5
14.6
14.7
16.8
17.2
17.4
18.1
14.5 ± 0.3
14.6 ± 0.4
14.7 ± 0.4
16.7 ± 0.5
17.1 ± 0.5
17.4 ± 0.5
17.9 ± 0.5
> 18
> 18
> 17
> 17
> 18
> 18
> 18
66 ± 4
64 ± 3
62 ± 3
60 ± 5
62 ± 5
60 ± 5
60 ± 5
14.0 ± 0.7
13.3 ± 0.6
12.3 ± 0.7
7.2 ± 0.7
6.5 ± 0.6
5.7 ± 0.5
5.3 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ± 30° (dB)
Cross polar ratio (dB)
0°
Max. power per input (W)
> 26
> 26
> 25
> 26
> 28
> 28
> 29
> 26
> 23
> 20
> 25
> 26
> 24
> 21
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1499 x 259 x 135
Packing dimensions (H x W x D) (mm)
1850 x 397 x 210
Antenna weight (kg)
16.5
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
25.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
495 (at 150 km/h) 225 (at 150 km/h) 615 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
86
2200 - 2490
+45° , -45°
DXX-790-960/1710-2690-65/65-15i/17.5i-M/M Model: ADU451716v01
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Description
Weight
Units per antenna
AIMM20D11
Remote electrical tilt module, a couple of AISG connectors
0.6 kg
1 (Separate packing)
Dual-band
Model
72 106
Unit: mm 790 - 960 X
1265 1499
29
1710 - 2690 X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2690 MHz
87
DXX-790-960/1710-2690-65/65-15i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R10 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
1710 - 2690 880 - 960
Polarization
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 15 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
2 - 12 , continuously adjustable
14.5
14.6
14.7
16.8
17.2
17.4
18.1
14.5 ± 0.3
14.6 ± 0.4
14.7 ± 0.4
16.7 ± 0.5
17.1 ± 0.5
17.4 ± 0.5
17.9 ± 0.5
> 18
> 18
> 17
> 17
> 18
> 18
> 18
66 ± 4
64 ± 3
62 ± 3
60 ± 5
62 ± 5
60 ± 5
60 ± 5
14.0 ± 0.7
13.3 ± 0.6
12.3 ± 0.7
7.2 ± 0.7
6.5 ± 0.6
5.7 ± 0.5
5.3 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ± 30° (dB)
> 26
> 26
> 25
> 26
> 28
> 28
> 29
Cross polar ratio (dB)
> 26
> 23
> 20
> 25
> 26
> 24
> 21
0°
Max. power per input (W)
250 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1499 x 259 x 135
Packing dimensions (H x W x D) (mm)
1850 x 397 x 210
Antenna weight (kg)
16.8
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
25.8 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
88
Units per antenna 1 (Separate packing)
1499
-40 .. +65 Frontal: 495 (at 150 km/h) Lateral: 225 (at 150 km/h) Rear side: 615 (at 150 km/h)
1265
Operational temperature (℃)
DXX-790-960/1710-2690-65/65-15i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R10 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……..r HWMxxx….....y y
r - Red
y - Yellow
r
Pattern sample for reference
790 - 960 MHz
1710 - 2690MHz
89
DXX-790-960/1710-2690-65/65-16i/18i-M/M Model: ADU451604v01
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2690
824 - 894
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
2 - 12 , continuously adjustable
15.9
16.0
16.1
17.1
17.5
17.8
18.3
15.7 ± 0.4
15.8 ± 0.3
16.0 ± 0.3
17.0 ± 0.5
17.4 ± 0.5
17.7 ± 0.3
18.1 ± 0.4
> 18
> 18
> 18
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
66 ± 1.6
64 ± 1.5
63 ± 2.1
63 ± 4.8
61 ± 4.0
60 ± 2.2
60 ± 4.0
Vertical 3dB beam width (°)
9.8 ± 0.4
9.5 ± 0.4
8.9 ± 0.4
7.2 ± 0.5
6.5 ± 0.5
5.6 ± 0.3
5.5 ± 0.3
> 25
> 25
> 26
> 20
> 20
> 20
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (790 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 24
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2087 x 259 x 135
Packing dimensions (H x W x D) (mm)
2380 x 315 x 220
Antenna weight (kg)
20.2
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
28.2 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 725 (at 150 km/h) Lateral: 330 (at 150 km/h) Rear side: 900 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
90
DXX-790-960/1710-2690-65/65-16i/18i-M/M Model: ADU451604v01
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20D11
Remote electrical tilt module, a couple of AISG connectors
0.6 kg
1 (Separate packing)
Dual-band
106
72
2087
1255
29
Unit: mm
790 - 960 X
1710 - 2690 X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2690 MHz
91
DXX-790-960/1710-2690-65/65-16i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4518R11 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
1710 - 2690 880 - 960
Polarization
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
2 - 12 , continuously adjustable
15.9
16.0
16.1
17.1
17.5
17.8
18.3
15.7 ± 0.4
15.8 ± 0.3
16.0 ± 0.3
17.0 ± 0.5
17.4 ± 0.5
17.7 ± 0.3
18.1 ± 0.4
> 18
> 18
> 18
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
66 ± 1.6
64 ± 1.5
63 ± 2.1
63 ± 4.8
61 ± 4.0
60 ± 2.2
60 ± 4.0
Vertical 3dB beam width (°)
9.8 ± 0.4
9.5 ± 0.4
8.9 ± 0.4
7.2 ± 0.5
6.5 ± 0.5
5.6 ± 0.3
5.5 ± 0.3
> 25
> 25
> 26
> 20
> 20
> 20
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (790 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 24
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2087 x 259 x 135
Packing dimensions (H x W x D) (mm)
2380 x 315 x 220
Antenna weight (kg)
20.5
Clamps weight (kg)
3.0 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 725 (at 150 km/h) Lateral: 330 (at 150 km/h) Rear side: 900 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
92
2087
28.5 (Included clamps)
1255
Antenna packing weight (kg)
DXX-790-960/1710-2690-65/65-16i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4518R11 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx……y r - Red
y
y - Yellow
r
Pattern sample for reference
790 - 960 MHz
1710 - 2690 MHz
93
DXX-790-960/1710-2690-65/65-17i/18i-M/M Model: ADU451712v01
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2690
824 - 894
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable 16.7
17.1
17.3
17.1
17.5
17.8
18.3
16.6 ± 0.4
17.0 ± 0.4
17.2 ± 0.4
17.0 ± 0.5
17.4 ± 0.5
17.7 ± 0.3
18.1 ± 0.4
> 18
> 18
> 18
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
66 ± 2.5
64 ± 2.3
63 ± 2.0
63 ± 4.8
61 ± 4.0
60 ± 2.2
60 ± 4.0
Vertical 3dB beam width (°)
8.3 ± 0.4
7.9 ± 0.4
7.3 ± 0.4
7.2 ± 0.5
6.5 ± 0.5
5.6 ± 0.3
5.5 ± 0.3
Gain (dBi)
at mid Tilt
2 - 12 , continuously adjustable
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (790 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 26
> 24
> 25
> 25
> 26
> 20
> 20
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2555 x 259 x 135
Packing dimensions (H x W x D) (mm)
2970 x 315 x 220
Antenna weight (kg)
22.9
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
33.2 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
915 (at 150 km/h) 415 (at 150 km/h) 1135 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
94
DXX-790-960/1710-2690-65/65-17i/18i-M/M Model: ADU451712v01
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20D11
Remote electrical tilt module, a couple of AISG connectors
0.6 kg
1 (Separate packing)
Dual-band
106
72
Unit: mm 790 - 960 X
1710 - 2690 X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
1710 - 2690 MHz
95
2555
1935
29
DXX-790-960/1710-2690-65/65-17i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4518R12 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2690
824 - 894
880 - 960
Polarization
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt
2 - 12 , continuously adjustable
16.7
17.1
17.3
17.1
17.5
17.8
18.3
16.6 ± 0.4
17.0 ± 0.4
17.2 ± 0.4
17.0 ± 0.5
17.4 ± 0.5
17.7 ± 0.3
18.1 ± 0.4
> 18
> 18
> 18
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
66 ± 2.5
64 ± 2.3
63 ± 2.0
63 ± 4.8
61 ± 4.0
60 ± 2.2
60 ± 4.0
Vertical 3dB beam width (°)
8.3 ± 0.4
7.9 ± 0.4
7.3 ± 0.4
7.2 ± 0.5
6.5 ± 0.5
5.6 ± 0.3
5.5 ± 0.3
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
< 1.5
VSWR Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (790 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 26
> 24
> 25
> 25
> 26
> 20
> 20
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2555 x 259 x 135
Packing dimensions (H x W x D) (mm)
2970 x 315 x 220
Antenna weight (kg)
23.3
Clamps weight (kg)
3.6 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 915 (at 150 km/h) Lateral: 415 (at 150 km/h) Rear side: 1135 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
96
2555
33.5 (Included clamps)
1935
Antenna packing weight (kg)
DXX-790-960/1710-2690-65/65-17i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4518R12 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx……y r - Red
y
y - Yellow
r
Pattern sample for reference
790 - 960 MHz
1710 - 2690 MHz
97
DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R9 Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
1710 - 2690
690 - 803 790 - 862 824 - 894 880 - 960 1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 15 , continuously adjustable
2 - 12 , continuously adjustable
at mid Tilt
14.5
14.5
14.6
14.7
16.8
17.2
17.4
18.1
over all Tilts
14.5 ± 0.3
14.5 ± 0.3
14.6 ± 0.4
14.7 ± 0.4
16.7 ± 0.5
17.1 ± 0.5
17.4 ± 0.5
17.9 ± 0.5
Side lobe suppression for first side lobe above main beam (dB)
> 17
> 18
> 18
> 17
> 17
> 18
> 18
> 18
68 ± 5
66 ± 4
64 ± 3
62 ± 3
60 ± 5
62 ± 5
60 ± 5
60 ± 5
15.3 ± 1
14.0 ± 0.7
13.3 ± 0.6
12.3 ± 0.7
7.2 ± 0.7
6.5 ± 0.6
5.7 ± 0.5
5.3 ± 0.3
> 28
> 28
> 29
> 26
> 24
> 21
Gain (dBi)
Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio , ± 30° (dB)
> 25
> 26
> 26
> 25
> 26
Cross polar ratio (dB)
> 20
> 26
> 23
> 20
> 25
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1499 x 259 x 135
Packing dimensions (H x W x D) (mm)
1850 x 397 x 210
Antenna weight (kg)
16.8
Clamps weight (kg)
3.0 (2 units) 25.8 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 495 (at 150 km/h) Lateral: 225 (at 150 km/h) Rear side: 615 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 16 °
98
Weight
Units per antenna
2.1 kg
1 (Separate packing)
1265 1499
Antenna packing weight (kg)
DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R9 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……..r HWMxxx….....y y
r - Red
y - Yellow
r
Pattern sample for reference
690 - 960 MHz
1710 - 2690 MHz
99
DXX-690-960/1710-2690-65/65-16i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4518R7 Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
1710 - 2690
824 - 894
880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
2 - 12 , continuously adjustable
15.5
15.9
16.0
16.1
17.1
17.5
17.8
18.3
15.5 ± 0.4
15.7 ± 0.4
15.8 ± 0.3
16.0 ± 0.3
17.0 ± 0.5
17.4 ± 0.5
17.7 ± 0.3
18.1 ± 0.4
> 18
> 18
> 18
> 18
> 17
> 17
> 17
> 17
69 ± 2.4
66 ± 1.6
64 ± 1.5
63 ± 2.1
63 ± 4.8
61 ± 4.0
60± 2.2
60 ± 4.0
10.5 ± 0.5
9.8 ± 0.4
9.5 ± 0.4
8.9 ± 0.4
7.2 ± 0.5
6.5 ± 0.5
5.6 ± 0.3
5.5 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 25
> 25
> 25
> 24
> 25
> 25
> 26
> 20
> 20
> 20
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2087 x 259 x 135
Packing dimensions (H x W x D) (mm)
2380 x 315 x 220
Antenna weight (kg)
20.5
Clamps weight (kg)
3.0 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal: 725 (at 150 km/h) Lateral: 330 (at 150 km/h) Rear side: 900 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
100
2087
28.5 (Included clamps)
1255
Antenna packing weight (kg)
DXX-690-960/1710-2690-65/65-16i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m Model: ADU4518R7 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx……y r - Red
y
y - Yellow r
Pattern sample for reference
690 - 960 MHz
1710 - 2690 MHz
101
DXX-690-960/1710-2690-65/65-17i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4518R8 Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
1710 - 2690
824 - 894
880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
2 - 12 , continuously adjustable
16.6
16.7
17.1
17.3
17.1
17.5
17.8
18.3
16.5 ± 0.3
16.6 ± 0.4
17.0 ± 0.4
17.2 ± 0.4
17.0 ± 0.5
17.4 ± 0.5
17.7 ± 0.3
18.1 ± 0.4
> 17
> 18
> 18
> 18
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
69 ± 2.5
66 ± 2.5
64 ± 2.3
63 ± 2.0
63 ± 4.8
61 ± 4.0
60 ± 2.2
60 ± 4.0
Vertical 3dB beam width (°)
8.9 ± 0.5
8.3 ± 0.4
7.9 ± 0.4
7.3 ± 0.4
7.2 ± 0.5
6.5 ± 0.5
5.6 ± 0.3
5.5 ± 0.3
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
< 1.5
VSWR Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 25
> 25
> 26
> 24
> 25
> 25
> 26
> 20
> 20
> 20
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106 Mechanical Properties Antenna dimensions (H x W x D) (mm)
2555 x 259 x 135
Packing dimensions (H x W x D) (mm)
2970 x 315 x 220
Antenna weight (kg)
23.3
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
33.5 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1935 2555
Mast diameter supported (mm)
-40 .. +65 Frontal: 915 (at 150 km/h) Lateral: 415 (at 150 km/h) Rear side: 1135 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
102
DXX-690-960/1710-2690-65/65-17i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m Model: ADU4518R8 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r
HWMxxx……y y
r - Red
y - Yellow
r
Pattern sample for reference
690 - 960 MHz
1710 - 2690 MHz
103
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M Model: ADU451819v01
Antenna Specifications Electrical Properties 2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable, each band separately at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
17.6
18.0
18.2
18.1
17.5 ± 0.5
17.8 ± 0.4
18.0 ± 0.4
17.9 ± 0.4
> 20
> 18
> 18
> 17
67 ± 3
66 ± 3
64 ± 5
61 ± 4
7.4 ± 0.4
6.9 ± 0.4
6.5 ± 0.6
6.0 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30 ≥ 30 (1710 - 2200 // 1710 - 2200 MHz)
Interband isolation (dB) Front to back ratio, ±30°(dB)
> 27
> 27
> 26
> 26
Cross polar ratio (dB)
> 22
> 22
> 21
> 18
0°
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 269 x 86
Packing dimensions (H x W x D) (mm)
1680 x 340 x 155
Antenna weight (kg)
10.6
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
17.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 540 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 510 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
104
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M Model: ADU451819v01
This antenna can upgrade to RET antenna when with a remote electrical tilt module.
Description
Weight
Units per antenna
AIMM20D11
Remote electrical tilt module, a couple of AISG connectors
0.6 kg
1 (Separate packing)
60
Dual-band
Model
106
1710 - 2200 Left X
1710 - 2200 Right X
+45°
+45°
7/16 (F)
-45°
7/16 (F) 7/16 (F)
1365
Unit: mm
1274
35.5
-45° 7/16 (F)
Pattern sample for reference
1710 - 2200 MHz (Left)
1710 - 2200 MHz (Right)
105
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R1v01 Antenna Specifications Electrical Properties 2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable, each band separately at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
17.6
18.0
18.2
18.1
17.5 ± 0.5
17.8 ± 0.4
18.0 ± 0.4
17.9 ±0.4
> 20
> 18
> 18
> 17
67 ± 3
66 ± 3
64 ± 5
61 ± 4
7.4 ± 0.4
6.9 ± 0.4
6.5 ± 0.6
6.0 ± 0.3
VSWR
< 1.5 ≥ 30
Cross polar isolation (dB)
≥ 30 (1710 - 2200 // 1710 - 2200 MHz)
Interband isolation (dB) Front to back ratio, ±30°(dB)
> 27
> 27
> 26
> 26
Cross polar ratio (dB)
> 22
> 22
> 21
> 18
0°
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 269 x 86
Packing dimensions (H x W x D) (mm)
1680 x 340 x 155
Antenna weight (kg)
10.9
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
17.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
1365
-40 .. +65 Frontal: 540 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 510 (at 150 km/h)
1274
Operational temperature (℃)
106
106
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R1v01 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……..bL HWMxxx…...bbR L - Left array
bL
bbR
R - Right array
Pattern sample for reference
1710 - 2200 MHz (Left)
1710 - 2200 MHz (Right)
107
DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M Model: ADU451902
Antenna Specifications Electrical Properties 2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
1920 - 2170
Polarization
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 6 , continuously adjustable , each band separately
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
18.7
19.1
19.4
19.3
18.6 ± 0.4
18.9 ± 0.4
19.1 ± 0.3
19.1 ± 0.4
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
67 ± 2.8
65 ± 2.8
62 ± 4.0
60 ± 4.0
Vertical 3dB beam width (°)
5.0 ± 0.3
4.7 ± 0.2
4.5 ± 0.3
4.1 ± 0.2
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 27
> 27
> 27
> 26
> 25
> 25
> 25
> 25
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1954 x 323 x 89
Packing dimensions (H x W x D) (mm)
2235 x 365 x 145
Antenna weight (kg)
17.3
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
23.8 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 890 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 1000 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 12 °
1.3 kg
1 (Separate packing)
108
DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M Model: ADU451902
36
59
Dual-band
43
31
L - Left Column
R - Right Column Unit: mm
1710 - 2200 X
1710 - 2200 X
+45°
+45°
7/16 (F)
-45°
7/16 (F)
7/16 (F)
-45°
7/16 (F)
Pattern sample for reference
1710 - 2200 MHz
109
DXX-1710-2170/2490-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R5 Antenna Specifications Electrical Properties 1710 - 2170
Frequency range (MHz)
1710 - 1990
1920 - 2170
Polarization
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately 17.5
17.7
18.3
17.3 ± 0.4
17.5 ± 0.4
18.1 ± 0.5
> 17
> 16
> 18
Horizontal 3dB beam width (°)
67 ± 3.1
63 ± 3.5
60 ± 4.5
Vertical 3dB beam width (°)
6.4 ± 0.5
5.9 ± 0.4
4.6 ± 0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30 (1710 - 2170 // 2490 - 2690 MHz)
Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
0°
> 24
> 25
> 25
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
68
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1490 x 155 x 109
Packing dimensions (H x W x D) (mm)
1818 x 210 x 180
Antenna net weight (kg)
9.8
Clamps weight (kg)
2.0 (2 units)
Antenna packing weight (kg)
15.3 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal: 230 (at 150 km/h) Lateral: 220 (at 150 km/h) Rear side: 405 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0 - 12 °
0.6 kg
1 (Separate packing)
110
1512 1544
38 - 115
1490
Mast diameter supported (mm)
DXX-1710-2170/2490-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R5 Integrated RET Specifications Integrated RET
RET protocols*
AISG 2.0/3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
Dual-band
Properties RET type
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx.…..b HWMxxx…...y b - Blue
b
y
y - Yellow
Pattern sample for reference
1710 - 2170 MHz
2490 - 2690 MHz
111
DXX-1710-2690/1710-2690-65/65-16i/16i-M/M Model: ADU451507
Antenna Specifications Electrical Properties 2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable, each band separately
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.2
15.9
16.0
16.5
15.2 ± 0.5
15.8 ± 0.5
16.0 ± 0.5
16.3 ± 0.5
> 18
> 18
> 18
> 17
66 ± 5.2
64 ± 4.8
62 ± 4.1
60 ± 4.4
12.0 ± 0.9
10.8 ± 0.9
10.0 ± 0.9
8.6 ± 0.6
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 24
> 24
> 24
> 24
> 18
> 18
> 18
> 18
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
840 x 299 x 109
Packing dimensions (H x W x D) (mm)
1200 x 350 x 195
Antenna weight (kg)
9.9
Clamps weight (kg)
2.0 (2 units)
Antenna packing weight (kg)
16.2 (Included clamps)
Mast diameter supported (mm)
38 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 290 (at 150 km/h) Lateral: 60 (at 150 km/h) Rear side: 340 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0° - 20°
0.6 kg
1 (Separate packing)
112
2490 - 2690
DXX-1710-2690/1710-2690-65/65-16i/16i-M/M Model: ADU451507
55
Dual-band
68
58
83
1710 - 2690 X
1710 - 2690 X
+45°
+45°
7/16 (F)
-45° 7/16 (F)
7/16 (F)
748
Unit: mm
840
58
-45° 7/16 (F)
Pattern sample for reference
1710 - 2200 MHz
2200 - 2690 MHz
113
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M Model: ADU451816v02
Antenna Specifications Electrical Properties 2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
Polarization
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately
17.4
17.9
18.2
18.4
17.3 ±0.3
17.7 ±0.4
18.0 ±0.3
18.2 ±0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam width (°)
66 ±2.7
65 ±2.7
63 ±2.8
61 ±2.6
Vertical 3dB beam width (°)
6.9 ±0.3
6.3 ±0.3
5.5 ±0.3
5.0 ±0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 27
> 27
> 27
> 27
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 269 x 86
Packing dimensions (H x W x D) (mm)
1680 x 340 x 155
Antenna weight (kg)
11.8
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
18.8 (included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
540 (at 150 km/h) 75 (at 150 km/h) 510 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
114
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M Model: ADU451816v02
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Description
Weight
Units per antenna
AIMM20D11
Remote electrical tilt module, a couple of AISG connectors
0.6 kg
1 (Separate packing)
Dual-band
Model
106
60
Unit: mm 1710 - 2690 Left X
1710 - 2690 Right X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
1274 1365
35.5
Pattern sample for reference
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
115
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R6v01 Antenna Specifications Electrical Properties 2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately 17.4
17.9
18.2
18.4
17.3 ± 0.3
17.7 ± 0.4
18.0 ± 0.3
18.2 ± 0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam width (°)
66 ± 2.7
65 ± 2.7
63 ± 2.8
61 ± 2.6
Vertical 3dB beam width (°)
6.9 ± 0.3
6.3 ± 0.3
5.5 ± 0.3
5.0 ± 0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 27
> 27
> 27
> 27
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 269 x 86
Packing dimensions (H x W x D) (mm)
1680 x 340 x 155
Antenna weight (kg)
12.1
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
19.1 (included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Wind load (N)
540 (at 150 km/h) 75 (at 150 km/h) 510 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
1365
-40 .. +65 Frontal: Lateral: Rear side:
1274
Operational temperature (℃)
116
106
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m Model: ADU4518R6v01 Integrated RET Specifications Properties RET type
Integrated RET AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
Dual-band
RET protocols*
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……..yL HWMxxx……yyR y - Yellow L - Left array
yL
yyR
R - Right array
Pattern sample for reference
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
117
Frequency 3dB Horizontal Range (MHz) beam width (°)
Gain (dBi)
Electrical Tilt Method downtilt (°)
Connector
Dimension (mm)
Model
Model
Array Symbol
790-862/ 880-960/ 1710-2690
65/65/65
15.5/16/18
0-10/ 0-10/0-10
EasyRET2.0
6 x 7/16 DIN-F 2020 x 298 x 150
ATR4518R2
121
K
790-862/ 880-960/ 1710-2690
65/65/65
16.5/17/18
0-10/ 0-10/0-10
EasyRET2.0
6 x 7/16 DIN-F 2520 x 298 x 150
ATR4518R12
123
K
690-862/ 880-960/ 1710-2690
65/65/65
14/14.5/17.5
0-12/ 0-12/2-12
EasyRET2.0
6 x 7/16 DIN-F 1490 x 298 x 150
ATR4517R5
125
K
790-960/ 1710-2180/ 1710-2180
65/65/65
16.5/ 16.5/16.5
0-12/ 0-12/0-12
MET1.0
6 x 7/16 DIN-F 2098 x 259 x 135 ATR451602v01
127
L
790-960/ 1710-2180/ 1710-2180
65/65/65
16.5/ 16.5/16.5
0-12/ 0-12/0-12
EasyRET1.0
6 x 7/16 DIN-F 2098 x 259 x 135
ATR4516R0
129
L
790-960/ 1710-2180/ 1710-2180
65/65/65
15/17.5/17.5
0-14/ 0-10/0-10
MET1.0
6 x 7/16 DIN-F 1497 x 349 x 166
ATR451715
131
M
790-960/ 1710-2180/ 1710-2180
65/65/65
15/17.5/17.5
0-14/ 0-10/0-10
EasyRET2.0
6 x 7/16 DIN-F 1497 x 349 x 166
ATR4517R3
133
M
790-960/ 1710-2180/ 1710-2180
65/65/65
17.5/ 17.5/17.5
0-10/ 0-10/0-10
MET1.0
6 x 7/16 DIN-F 2680 x 259 x 135 ATR451704v01
135
L
790-960/ 1710-2180/ 1710-2180
65/65/65
17.5/ 17.5/17.5
0-10/ 0-10/0-10
EasyRET1.0
6 x 7/16 DIN-F 2680 x 259 x 135
ATR4517R0
137
L
790-960/ 1710-2690/ 1710-2690
65/65/65
15/ 17.5/17.5
0-14/ 0-10/0-10
EasyRET1.0
6 x 7/16 DIN-F 1499 x 349 x 166
ATR4517R1
139
N
790-960/ 1710-2690/ 1710-2690
65/65/65
16/18/18
0-10/ 0-10/0-10
EasyRET1.0
6 x 7/16 DIN-F 1999 x 349 x 166
ATR4518R4
141
N
790-960/ 1710-2690/ 1710-2690
65/65/65
17/18/18
0-10/ 0-10/0-10
EasyRET1.0
6 x 7/16 DIN-F 2528 x 349 x 166
ATR4518R7
143
N
790-960/ 1710-2690/ 1710-2690
65/65/65
15/17.5/17.5
0-14/ 0-10/0-10
MET1.0
6 x 7/16 DIN-F 1536 x 349 x 166
ATR451709
145
N
790-960/ 1710-2690/ 1710-2690
65/65/65
16/18/18
0-10/ 0-10/0-10
MET1.0
6 x 7/16 DIN-F 1999 x 349 x 166
ATR451606
147
N
790-960/ 1710-2690/ 1710-2690
65/65/65
17/18/18
0-10/ 0-10/0-10
MET1.0
6 x 7/16 DIN-F 2528 x 349 x 166
ATR451607
149
N
** Preliminary Issue
Tri-band
B - 3. Tri-band Antenna
B - 3. Tri-band Antenna
Frequency 3dB Horizontal Range (MHz) beam width (°)
Gain (dBi)
Electrical Tilt Method downtilt (°)
Connector
Dimension (mm)
Model
Model
Array Symbol
690-960/ 1710-2690/ 1710-2690
65/65/65
15/17.5/17.5
0-14/ 0-10/0-10
MET2.0
6 x 7/16 DIN-F 1499 x 359 x 178
ATR451806
151
N
690-960/ 1710-2690/ 1710-2690
65/65/65
15/17.5/17.5
0-14/ 0-10/0-10
EasyRET2.0
6 x 7/16 DIN-F 1499 x 359 x 178
ATR4518R13
153
N
690-960/ 1710-2690/ 1710-2690
65/65/65
16/18/18
0-10/ 0-10/0-10
EasyRET2.0
6 x 7/16 DIN-F 2022 x 359 x 178
ATR4518R6
155
N
690-960/ 1710-2690/ 1710-2690
65/65/65
17/18/18
0-10/ 0-10/0-10
EasyRET2.0
6 x 7/16 DIN-F 2523 x 359 x 178
ATR4518R11
157
N
1710-2200/ 1710-2200/ 1710-2200
65/65/65
18/18/18
0-10/ 0-10/0-10
MET2.0
6 x 7/16 DIN-F
1365 x 376 x 99
ATR451807
159
O
1710-2200/ 1710-2200/ 1710-2200
65/65/65
18/18/18
0-10/ 0-10/0-10
EasyRET2.0
6 x 7/16 DIN-F
1365 x 376 x 99
ATR4518R15
161
O
1710-2690/ 1710-2170/ 2490-2690
65/65/65
18/18/18
0-12/ 0-12/0-12
EasyRET1.0
6 x 7/16 DIN-F 1445 x 299 x 109
ATR4518R3
163
Q
1710-2690/ 1710-2690/ 1710-2690
65/65/65
18/18/18
0-12/ 0-12/0-12
MET2.0
6 x 7/16 DIN-F
1365 x 376 x 99
ATR451714v01
165
P
1710-2690/ 1710-2690/ 1710-2690
65/65/65
18/18/18
0-12/ 0-12/0-12
EasyRET2.0
6 x 7/16 DIN-F
1365 x 376 x 99
ATR4518R14
167
P
** Preliminary Issue
Array Symbol Type Type K
Type L
Type M
Type N
bL
yL
Type O
Type P
Type Q
bT y
bbR
yyR
bbB r
rr
r
r
r
bL
bbC
bbbR
yL
yyC
yyyR
bL yL
yyR
DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4518R2 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862
1710 - 2690
880 - 960
1710 - 1990
Polarization
2200 - 2490
2490 - 2690
0 - 10 , continuously adjustable , each band separately
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.0
15.4
17.8
18.0
18.0
18.0
15.0 ±0.4
15.3 ±0.3
17.5 ±0.5
17.9 ±0.3
17.9 ±0.4
17.8 ±0.5
> 16
> 16
> 16
> 17
> 17
> 16
68 ±2.0
65 ±2.0
61 ±3.0
60 ±3.0
60 ±5.0
61 ±5.0
10.1 ±0.8
9.9 ±0.8
6.0 ±0.4
5.4 ±0.4
4.6 ±0.3
4.3 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 28 (790 - 862 // 880 - 960 MHz) ≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
> 26
> 26
> 27
> 27
> 26
> 26
> 18
> 18
> 18
> 18
> 18
> 18
500 (at 50℃ ambient temperature)
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
2020 x 298 x 150
Packing dimensions (H x W x D) (mm)
2365 x 360 x 230
Antenna weight (kg)
25.8
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
37.8 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1913 2020
Mast diameter supported (mm)
-40 .. +65 Frontal: 825 (at 150 km/h) Lateral: 355 (at 150 km/h) Rear side: 990 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
121
Tri-band
Electrical downtilt (°) Gain (dBi)
1920 - 2200
+45° , -45°
DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4518R2 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC in/out
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx….r HWMxxx…rr
y
HWMxxx….y r - Red
y - Yellow r
rr
Pattern sample for reference
790 - 862 MHz
122
880 - 960 MHz
1710 - 2690 MHz
DXXX-790-862/880-960/1710-2690-65/65/65-16.5i/17i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4518R12 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862
1710 - 2690
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45° 0 - 10 , continuously adjustable, each band separately 15.9
16.3
17.8
18.0
18.0
18.0
15.8 ± 0.4
16.1 ± 0.5
17.5 ± 0.5
17.8 ± 0.4
17.8 ± 0.4
17.8 ± 0.4
> 16
> 16
> 16
> 17
> 17
> 16
Horizontal 3dB beam width (°)
67 ± 2.0
64 ± 2.0
61 ± 4.0
60 ± 4.0
60 ± 4.0
61 ± 5.0
Vertical 3dB beam width (°)
8.5 ± 0.7
7.5 ± 0.7
6.0 ± 0.5
5.4 ± 0.4
4.6 ± 0.3
4.3 ± 0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28
≥ 28 ≥ 28 (790 - 862 // 880 - 960 MHz) ≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio, ± 30° (dB)
> 28
> 28
> 28
> 28
> 28
> 28
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
0°
500 (at 50℃ ambient temperature)
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2520 x 298 x 150
Packing dimensions (H x W x D) (mm)
2885 x 365 x 235
Antenna weight (kg)
29.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
44.5 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1913 2520
Mast diameter supported (mm)
-40 .. +65
Frontal: 1060 (at 150 km/h) Lateral: 455 (at 150 km/h) Rear side: 1265 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
123
Tri-band
Electrical downtilt (°)
DXXX-790-862/880-960/1710-2690-65/65/65-16.5i/17i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4518R12 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC in/out
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx….r HWMxxx…rr y
HWMxxx….y r - Red
y - Yellow r
rr
Pattern sample for reference
790 - 862 MHz
124
880 - 960 MHz
1710 - 2690 MHz
DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4517R5 Antenna Specifications Electrical Properties 690 - 862
Frequency range (MHz)
690 - 820
880 - 960
790 - 862
1710 - 2690
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45° 0 - 12 , continuously adjustable , each band separately
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
2 - 12 , continuously adjustable
13.8
13.8
14.3
16.8
17.0
17.2
17.5
13.7 ±0.3
13.7 ±0.3
14.1 ±0.5
16.6 ±0.4
16.8 ±0.4
17.1 ±0.4
17.4 ±0.4
> 16
> 16
> 17
> 15
> 15
> 15
> 15
69 ±2.0
66 ±2.0
63 ±2.0
63 ±5.0
61 ±5.0
60 ±5.0
60 ±5.0
15.3 ±1.0
13.5 ±1.0
12.0 ±1.0
6.5 ±0.5
6.0 ±0.5
5.2 ±0.3
4.8 ±0.3
> 27
> 27
> 28
> 17
> 20
> 19
VSWR
Tri-band
Electrical downtilt (°)
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28 ≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 28 (690 - 862 // 1710 - 2690 MHz) ≥ 28 (880 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
> 28
> 28
> 26
> 27
> 25
> 22
> 18
> 17
300 (at 50℃ ambient temperature)
Max. power per input (W) Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1490 x 298 x 150
Packing dimensions (H x W x D) (mm)
1820 x 360 x 230
Antenna weight (kg)
20.8
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
30.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 580 (at 150 km/h) Lateral: 250 (at 150 km/h) Rear side: 695 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
125
1490
50 - 115 1389
Mast diameter supported (mm)
DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4517R5 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……r HWMxxx……y y
HWMxxx……rr
r - Red
y - Yellow r
rr
Pattern sample for reference
690 - 862 MHz
126
880 - 960 MHz
1710 - 2690 MHz
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5iM/M/M Model: ATR451602v01 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2180) 880 - 960
Polarization
1850 - 1990
1920 - 2180
0 - 12 , continuously adjustable , each band separately at mid Tilt over all Tilts
Bottom Top
16.0
16.3
16.2
15.9 ±0.5
16.0 ±0.4
16.1 ±0.4
at mid Tilt over all Tilts
16.2
16.4
16.5
16.0 ±0.4
16.2 ±0.4
16.3 ±0.4
16.0
16.4
16.5
15.8 ±0.4
16.2 ±0.4
16.3 ±0.4
> 17
> 18
> 17
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
> 18
> 19
> 19
69 ±2.0
66 ±2.0
65 ±3.0
10.7 ±0.5
10.1 ±0.5
9.4 ±0.5
64 ±4.0
60 ±5.0
60 ±5.0
Bottom: 9.6 ±0.6
Bottom: 8.9 ±0.5
Bottom: 8.3 ±0.6
Top: 8.5 ±0.6
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Top: 7.5 ±0.6
≥ 40 (790 - 960 // 1710 - 2180 MHz) ≥ 35 (1710 - 2180 // 1710 - 2180 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
Top: 8.0 ±0.5
0°
Max. power per input (W)
> 24
> 25
> 25
> 25
> 25
> 24
> 26
> 26
> 26
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2098 x 259 x 135
Packing dimensions (H x W x D) (mm)
2380 x 305 x 190
Antenna weight (kg) Clamps weight (kg)
Antenna packing weight (kg)
19.4 3.0 (2 units)
28.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃) Wind load (N)
-55 .. +65
Frontal: 730 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 965 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
127
Tri-band
Electrical downtilt (°)
Gain (dBi)
1710 - 1880
+45° , -45°
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5iM/M/M Model: ATR451602v01 Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
61
44
17 56
55
70
T - Top Column
790 - 960 X +45°
-45°
7/16 (F)
7/16 (F)
Unit: mm
B - Bottom Column
1710 - 2180 Bottom X +45°
7/16 (F)
-45°
7/16 (F)
1710 - 2180 Top X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
128
1710 - 2180 MHz (Bottom)
1710 - 2180 MHz (Top)
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5iM/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4516R0 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1850 - 1990
1920 - 2180
+45° , -45° 0 - 12 , continuously adjustable , each band separately at mid Tilt over all Tilts Bottom Top
16.0
16.3
16.2
15.9 ±0.5
16.0 ±0.4
16.1 ±0.4
at mid Tilt over all Tilts
16.2
16.4
16.5
16.0 ±0.4
16.2 ±0.4
16.3 ±0.4
16.0
16.4
16.5
15.8 ±0.4
16.2 ±0.4
16.3 ±0.4
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
> 18
> 19
> 19
> 17
> 18
> 17
69 ±2.0
66 ±2.0
65 ±3.0
64 ±4.0
60 ±5.0
60 ±5.0
Bottom: 9.6 ±0.6
Bottom: 8.9 ±0.5
Bottom: 8.3 ±0.6
Top: 8.5 ±0.6
Top: 8.0 ±0.5
Top: 7.5 ±0.6
10.7 ±0.5
10.1 ±0.5
9.4 ±0.5
< 1.5
VSWR Cross polar isolation (dB)
≥ 30 ≥ 40 (790 - 960 // 1710 - 2180 MHz) ≥ 35 (1710 - 2180 // 1710 - 2180 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 25
> 25
> 25
> 25
> 24
> 26
> 26
> 26
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2098 x 259 x 135
Packing dimensions (H x W x D) (mm)
2380 x 305 x 190
Antenna weight (kg)
20.7
Clamps weight (kg)
3.0 (2 units) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃) Wind load (N) Max. operational wind speed (km/h)
Survival wind speed (km/h) Connector
Connector position
2098
29.9 (Included clamps)
Mast diameter supported (mm)
1989
Antenna packing weight (kg)
-40 .. +65 Frontal: 730 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 965 (at 150 km/h) 200
250 6 x 7/16 DIN Female
Bottom
129
Tri-band
Electrical downtilt (°)
Gain (dBi)
1710 - 1880
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5iM/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4516R0 Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx…….r
bT
HWMxxx…..bT
HWMxxx…bbB r - Red T - Top array
b - Blue B - Bottom array
bbB r
Pattern sample for reference
790 - 960MHz
130
1710 - 2180 MHz (Bottom)
1710 - 2180 MHz (Top)
DXXX-790-960/1710-2180/1710-2180-65/65/65-15i/17.5i/17.5i-M/M/M Model: ATR451715
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2180) 880 - 960
1920 - 2180
+45° , -45°
Electrical downtilt (°) Gain (dBi)
1850 - 1990
0 - 10 , continuously adjustable each band separately
0 - 14 , continuously adjustable at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
14.5
15.0
15.0
17.1
17.3
17.4
14.5 ±0.5
14.8 ±0.4
15.1 ±0.5
16.9 ±0.4
17.2 ±0.4
17.2 ±0.4
> 17
> 17
> 16
> 16
> 16
> 16
66 ±3.0
64 ±3.0
62 ±3.0
66 ±4.0
64 ±4.0
63±4.0
15.2 ±0.8
14.8 ±0.8
13.7 ±0.8
7.2 ±0.5
7.0 ±0.3
6.6 ±0.4
< 1.5
VSWR Cross polar isolation (dB)
≥ 30 ≥ 30 (790 - 960 // 1710 - 2180 MHz) ≥ 30 (1710 - 2180 // 1710 - 2180 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 24
> 25
> 26
> 26
> 26
> 20
> 20
> 20
> 18
> 18
> 18
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1497 x 349 x 166
Packing dimensions (H x W x D) (mm)
1825 x 410 x 235
Antenna weight (kg)
19.5
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg) Mast diameter supported (mm)
29.9 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
Frontal: 505 (at 150 km/h) Lateral: 165 (at 150 km/h) Rear side: 540 (at 150 km/h) 200 250 6 x 7/16 DIN Female Bottom
131
Tri-band
Polarization
1710 - 1880
DXXX-790-960/1710-2180/1710-2180-65/65/65-15i/17.5i/17.5i-M/M/M Model: ATR451715
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
106 57
57
60
Unit: mm
1710 - 2180 Left X +45°
-45°
7/16 (F)
7/16 (F)
790 - 960 X +45°
7/16 (F)
-45°
7/16 (F)
1395 1497
63
1710 - 2180 Right X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
132
1710 - 2180 MHz (Left)
1710 - 2180 MHz (Right)
DXXX-790-960/1710-2180/1710-2180-65/65/65-15i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.5m Model: ATR4517R3 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
at mid Tilt
Gain (dBi)
0 - 10 , continuously adjustable , each band separately
0 - 14 , continuously adjustable
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
14.5
15.0
15.0
17.1
17.3
17.4
14.5 ±0.5
14.8 ±0.4
15.1 ±0.5
16.9 ±0.4
17.2 ±0.4
17.2 ±0.4
> 17
> 17
> 16
> 16
> 16
> 16
66 ±3.0
64 ±3.0
62 ±3.0
66 ±4.0
64 ±4.0
63±4.0
15.2 ±0.8
14.8 ±0.8
13.7 ±0.8
7.2 ±0.5
7.0 ±0.3
6.6 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
≥ 30 (790 - 960 // 1710 - 2180 MHz) ≥ 30 (1710 - 2180 // 1710 - 2180 MHz)
Interband isolation (dB)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 24
> 25
> 26
> 26
> 26
> 20
> 20
> 20
> 18
> 18
> 18
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1497 x 349 x 166
Packing dimensions (H x W x D) (mm)
1825 x 415 x 240
Antenna weight (kg)
20.2
Clamps weight (kg)
3.0 (2 units) 29.4 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1395 1497
Antenna packing weight (kg)
Frontal: 505 (at 150 km/h) Lateral: 165 (at 150 km/h) Rear side: 540 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
133
Tri-band
Electrical downtilt (°)
DXXX-790-960/1710-2180/1710-2180-65/65/65-15i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.5m Model: ATR4517R3 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx..….r HWMxxx….bL
bL
bbR
HWMxxx..bbR r - Red L - Left array
b - Blue R - Right array
Pattern sample for reference
790 - 960 MHz
134
1710 - 2180 MHz (Left)
1710 - 2180 MHz (Right)
r
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5iM/M/M Model: ATR451704v01 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2180) 880 - 960
Polarization
1850 - 1990
1920 - 2180
0 - 10 , continuously adjustable, each band separately at mid Tilt over all Tilts
Bottom Top
16.8
17.1
17.3
16.7 ±0.4
16.9 ±0.4
17.1 ±0.4
at mid Tilt over all Tilts
17.1
17.6
17.6
16.9 ±0.4
17.4 ±0.4
17.4 ±0.4
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
17.3
17.3
17.1 ±0.4
17.0 ±0.5
> 19
> 19
> 19
> 18
> 16
> 15
69 ±2.0
66 ±2.0
65 ±3.0
63 ±4.0
62 ±3.0
60 ±4.0
7.5 ±0.4
Bottom: 7.5 ±0.3
Bottom: 7.0 ±0.3
Bottom: 6.6 ±0.4
Top: 7.0 ±0.3
Top: 6.5 ±0.3
Top: 6.1 ±0.4
8.4 ±0.4
8.0 ±0.4
< 1.5
VSWR Cross polar isolation (dB)
≥ 30 ≥ 40 (790 - 960 // 1710 - 2180 MHz) ≥ 40 (1710 - 2180 // 1710 - 2180 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
17.1 16.8 ±0.4
0°
Max. power per input (W)
> 25
> 25
> 26
> 26
> 26
> 26
> 28
> 28
> 28
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2680 x 259 x 135
Packing dimensions (H x W x D) (mm)
2965 x 305 x 190
Antenna weight (kg)
23
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
32.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 970 (at 150 km/h) Lateral: 500 (at 150 km/h) Rear side: 1285 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
135
Tri-band
Electrical downtilt (°)
Gain (dBi)
1710 - 1880
+45° , -45°
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5iM/M/M Model: ATR451704v01 Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
61
44
17 56
55 T - Top Column
70 B - Bottom Column
1710 - 2180 Bottom X
790 - 960 X
+45° +45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
-45°
7/16 (F)
Unit: mm
1710 - 2180 Top X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
136
1710 - 2180 MHz (Bottom)
1710 - 2180 MHz (Top)
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5iM/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4517R0 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2180) 880 - 960
Polarization
1850 - 1990
1920 - 2180
0 - 10 , continuously adjustable, each band separately at mid Tilt over all Tilts
Bottom Top
16.8
17.1
17.3
16.7 ±0.4
16.9 ±0.4
17.1 ±0.4
at mid Tilt over all Tilts
17.1
17.6
17.6
16.9 ±0.4
17.4 ±0.4
17.4 ±0.4
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
17.3
17.3
17.1 ±0.4
17.0 ±0.5
> 19
> 19
> 19
> 18
> 16
> 15
69 ±2.0
66 ±2.0
65 ±3.0
63 ±4.0
62 ±3.0
60 ±4.0
7.5 ±0.4
Bottom: 7.5 ±0.3
Bottom: 7.0 ±0.3
Bottom: 6.6 ±0.4
Top: 7.0 ±0.3
Top: 6.5 ±0.3
Top: 6.1 ±0.4
8.4 ±0.4
8.0 ±0.4
< 1.5
VSWR Cross polar isolation (dB)
≥ 30 ≥ 40 (790 - 960 // 1710 - 2180 MHz) ≥ 40 (1710 - 2180 // 1710 - 2180 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
17.1 16.8 ±0.4
Tri-band
Electrical downtilt (°)
Gain (dBi)
1710 - 1880
+45° , -45°
0°
Max. power per input (W)
> 25
> 25
> 26
> 26
> 26
> 26
> 28
> 28
> 28
> 20
> 20
> 20
300 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2680 x 259 x 135
Packing dimensions (H x W x D) (mm)
2965 x 305 x 190
Mast diameter supported (mm)
3.0 (2 units) 33.0 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 970 (at 150 km/h) Lateral: 500 (at 150 km/h) Rear side: 1285 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
2680
Clamps weight (kg) Antenna packing weight (kg)
25.0
2572
Antenna weight (kg)
6 x 7/16 DIN Female Bottom
137
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5iM/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4517R0 Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx…….r
bT
HWMxxx…..bT HWMxxx…bbB bbB
r - Red T - Top array
b - Blue B - Bottom array
r
Pattern sample for reference
790 - 960MHz
138
1710 - 2180 MHz (Bottom)
1710 - 2180 MHz (Top)
DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4517R1 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2690) 880 - 960
Polarization
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45° 0 - 14 , continuously adjustable at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 10 , continuously adjustable , each band separately
14.3
14.5
14.7
17.3
17.8
18.0
17.9
14.2 ± 0.4
14.4 ± 0.4
14.6 ± 0.5
17.2 ± 0.5
17.6 ± 0.4
17.8 ± 0.4
17.8 ± 0.5
> 17
> 16
> 16
> 16
> 16
> 16
> 15
66 ± 3.4
64 ± 3.7
62 ± 4.8
63 ± 5.0
62 ± 5.0
60 ± 4.3
60 ± 5.0
16.0 ± 0.9
15.6 ± 0.9
14.6 ± 1.0
6.4 ± 0.4
5.7 ± 0.4
5.1 ± 0.3
4.6 ± 0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 30 (790 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
Tri-band
Electrical downtilt (°)
0°
Max. power per input (W)
> 24
> 24
> 24
> 25
> 25
> 25
> 25
> 20
> 20
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1499 x 349 x 166
Packing dimensions (H x W x D) (mm)
1825 x 415 x 240
Antenna weight (kg)
21.0
Clamps weight (kg)
3.0 (2 units) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1499
30.3 (Included clamps)
Frontal: 505 (at 150 km/h) Lateral: 165 (at 150 km/h) Rear side: 540 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1395
Antenna packing weight (kg) Mast diameter supported (mm)
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
139
DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4517R1 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx..….r
HWMxxx….yL
yL
yyR
HWMxxx..yyR r - Red L - Left array
y - Yellow R - Right array r
Pattern sample for reference
790 - 960MHz
140
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4518R4 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45° 0 - 10 , continuously adjustable, each band separately at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.9
16.1
16.3
17.5
17.8
18.0
18.2
15.8 ± 0.4
16.0 ± 0.4
16.2 ± 0.5
17.4 ± 0.4
17.6 ± 0.5
17.9 ± 0.5
18.0 ± 0.5
> 17
> 17
> 17
> 16
> 16
> 16
> 16
65 ± 1.5
64 ± 3.0
62 ± 4.1
65 ± 4.8
62 ± 3.7
60 ± 4.3
60 ± 4.5
10.1 ± 0.4
9.8 ± 0.5
9.3 ± 0.5
5.8 ± 0.3
5.4 ± 0.3
4.8 ± 0.3
4.3 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 30 (790 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 18
> 18
> 18
> 18
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 415 x 240
Antenna weight (kg)
25
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
39.8 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1999
50 - 115
1892
Mast diameter supported (mm)
-40 .. +65 Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 730 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
141
Tri-band
Electrical downtilt (°)
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4518R4 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx..….r HWMxxx….yL yL
HWMxxx..yyR r - Red L - Left array
yyR
y - Yellow R - Right array r
Pattern sample for reference
790 - 960 MHz
142
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4518R7 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2690) 880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable, each band separately 16.8
17.0
17.3
17.5
17.8
18.0
18.2
16.7 ± 0.4
17.0 ± 0.3
17.2 ± 0.5
17.4 ± 0.5
17.6 ± 0.5
17.9 ± 0.5
18.0 ± 0.5
> 17
> 17
> 17
> 16
> 16
> 16
> 16
Horizontal 3dB beam width (°)
65 ± 2.0
64 ± 2.0
62 ± 4.1
65 ± 4.8
62 ± 3.7
60 ± 4.3
60 ± 4.5
Vertical 3dB beam width (°)
8.6 ± 0.5
8.2 ± 0.5
7.6 ± 0.5
5.8 ± 0.3
5.4 ± 0.3
4.8 ± 0.3
4.3 ± 0.3
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 30 (790 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
Tri-band
at mid Tilt
0°
Max. power per input (W)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 18
> 18
> 18
> 18
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2885 x 420 x 240
Antenna weight (kg)
29.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
44.0 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey -40 .. +65 Frontal: 920 (at 150 km/h) Lateral: 305 (at 150 km/h) Rear side: 955 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
2424
Operational temperature (℃)
2528
Mast diameter supported (mm)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
143
DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4518R7 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx..….r
HWMxxx….yL
yL
yyR
HWMxxx..yyR r - Red L - Left array
y - Yellow R - Right array
r
Pattern sample for reference
790 - 960 MHz
144
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M Model: ATR451709
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45° 0 - 14 , continuously adjustable at mid Tilt
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 10 , continuously adjustable , each band separately
14.3
14.5
14.7
17.3
17.8
18.0
17.9
14.2 ± 0.4
14.4 ± 0.4
14.6 ± 0.5
17.2 ± 0.5
17.6 ± 0.4
17.8 ± 0.4
17.8 ± 0.5
> 17
> 16
> 16
> 16
> 16
> 16
> 15
66 ± 3.4
64 ± 3.7
62 ± 4.8
63 ± 5.0
62 ± 5.0
60 ± 4.3
60 ± 5.0
14.2 ± 0.9
13.8 ± 0.9
13.0 ± 1.0
6.4 ± 0.4
5.7 ± 0.4
5.1 ± 0.3
4.6 ± 0.4
< 1.5
VSWR Cross polar isolation (dB)
≥ 28 ≥ 30 (790 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 24
> 24
> 24
> 25
> 25
> 25
> 25
> 20
> 20
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1536 x 349 x 166
Packing dimensions (H x W x D) (mm)
1870 x 415 x 240
Antenna weight (kg)
19.9
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
31.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 525 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 545 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
145
Tri-band
Electrical downtilt (°) Gain (dBi)
1710 - 1990
DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M Model: ATR451709
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
57
57
60
63
Unit: mm
1710 - 2690 Left X +45°
-45°
7/16 (F)
7/16 (F)
790 - 960 X +45°
7/16 (F)
-45°
7/16 (F)
1710 - 2690 Right X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
146
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M Model: ATR451606
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960
1710 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45° 0 - 10 , continuously adjustable, each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.9
16.1
16.3
17.5
17.8
18.0
18.2
17.6 ± 0.5
17.9 ± 0.5
18.0 ± 0.5
> 16
> 16
> 16
15.8 ± 0.4
16.0 ± 0.4
16.2 ± 0.5
17.4 ± 0.4
> 17
> 17
> 17
> 16
65 ± 1.5
64 ± 3.0
62 ± 4.1
65 ± 4.8
62 ± 3.7
60 ± 4.3
60 ± 4.5
10.1 ± 0.4
9.8 ± 0.5
9.3 ± 0.5
5.8 ± 0.3
5.4 ± 0.3
4.8 ± 0.3
4.3 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 30 (790 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 18
> 18
> 18
> 18
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 415 x 240
Antenna weight (kg)
24.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
39.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃) Wind load (N)
-55 .. +65 Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 730 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
147
Tri-band
Electrical downtilt (°) Gain (dBi)
1920 - 2200
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M Model: ATR451606
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
57
57
60
63
Unit: mm
1710 - 2690 Left X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 X +45°
7/16 (F)
-45°
7/16 (F)
1710 - 2690 Right X
+45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
148
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M Model: ATR451607
Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960
1710 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45° 0 - 10 , continuously adjustable, each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
16.8
17.0
17.3
17.5
17.8
18.0
18.2
17.6 ± 0.5
17.9 ± 0.5
18.0 ± 0.5
> 16
> 16
> 16
16.7 ± 0.4
17.0 ± 0.3
17.2 ± 0.5
17.4 ± 0.5
> 17
> 17
> 17
> 16
Horizontal 3dB beam width (°)
65 ± 2.0
64 ± 2.0
62 ± 4.1
65 ± 4.8
62 ± 3.7
60 ± 4.3
60 ± 4.5
Vertical 3dB beam width (°)
8.6 ± 0.5
8.2 ± 0.5
7.6 ± 0.5
5.8 ± 0.3
5.4 ± 0.3
4.8 ± 0.3
4.3 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 30 (790 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 18
> 18
> 18
> 18
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2885 x 420 x 240
Antenna weight (kg)
28.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
43.7 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃) Wind load (N)
-55 .. +65 Frontal: 920 (at 150 km/h) Lateral: 305 (at 150 km/h) Rear side: 955 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
149
Tri-band
Electrical downtilt (°) Gain (dBi)
1920 - 2200
DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M Model: ATR451607
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
57
57
60
63
Unit: mm
1710 - 2690 Left X +45°
-45°
7/16 (F)
7/16 (F)
790 - 960 X +45°
7/16 (F)
-45°
7/16 (F)
1710 - 2690 Right X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
790 - 960 MHz
150
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-690-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M Model: ATR451806
Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
Gain (dBi)
0 - 14 , continuously adjustable at mid Tilt over all Tilts
14.4
14.5
14.7
0 - 10 , continuously adjustable, each band separately
14.3 ±0.5 14.5 ±0.5 14.8 ±0.5 15.0 ±0.5
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
18.2
18.3
17.3 ±0.6
17.7 ±0.5
18.1 ±0.6
18.2 ±0.5
> 17
> 17
> 19
> 19
> 19
> 19
> 19
65 ±2.5
64 ±2.0
64 ±2.0
64 ±3.2
65 ±3.9
63 ±3.3
62 ±4.8
60 ±4.5
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ±0.3
< 1.5
VSWR Cross polar isolation (dB)
≥ 28
≥ 28 ≥ 30 (690 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
17.8
> 16
15.6 ±1.2 13.7 ±0.9 13.1 ±0.8 12.2 ±0.8
Vertical 3dB beam width (°)
17.5
15.1
0°
Max. power per input (W)
> 24
> 26
> 26
> 26
> 30
> 30
> 28
> 27
> 19
> 20
> 20
> 22
> 18
> 19
> 20
> 19
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1499 x 359 x 178
Packing dimensions (H x W x D) (mm)
1880 x 425 x 250
Antenna weight (kg)
23.2
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
35.1 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃) Wind load (N)
-55 .. +65 Frontal: Lateral: Rear side:
670 (at 150 km/h) 180 (at 150 km/h) 560 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
151
Tri-band
Electrical downtilt (°)
DXXX-690-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M Model: ATR451806
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20M11
Remote electrical tilt module, a couple of AISG connectors
0.7 kg
1 (Separate packing)
106
60
53
Unit: mm
1710 - 2690 Left X +45°
-45°
7/16 (F)
7/16 (F)
690 - 960 X +45°
7/16 (F)
-45°
7/16 (F)
1347 1499
50
1710 - 2690 Right X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
690 - 960 MHz
152
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-690-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.5m Model: ATR4518R13 Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45° 0 - 14 , continuously adjustable
at mid Tilt
Gain (dBi)
14.4
over all Tilts
14.5
14.7
0 - 10 , continuously adjustable, each band separately
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
17.8
18.2
18.3
17.7 ±0.5
18.1 ±0.6
18.2 ±0.5
> 16
> 17
> 17
> 19
> 19
> 19
> 19
> 19
65 ±2.5
64 ±2.0
64 ±2.0
64 ±3.2
65 ±3.9
63 ±3.3
62 ±4.8
60 ±4.5
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ±0.3
> 30
> 28
> 27
> 19
> 20
> 19
15.6 ±1.2 13.7 ±0.9 13.1 ±0.8 12.2 ±0.8
Vertical 3dB beam width (°)
17.5 17.3 ±0.6
15.1
14.3 ±0.5 14.5 ±0.5 14.8 ±0.5 15.0 ±0.5
< 1.5
VSWR Cross polar isolation (dB)
≥ 28
≥ 28 ≥ 30 (690 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 24
> 26
> 26
> 26
> 30
> 19
> 20
> 20
> 22
> 18
500 (at 50℃ ambient temperature)
Max. power per input (W) Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1499 x 359 x 178
Packing dimensions (H x W x D) (mm)
1880 x 425 x 250
Antenna weight (kg)
23.6
Clamps weight (kg)
3.6 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
1499
35.5 (Included clamps)
1347
Antenna packing weight (kg)
-40 .. +65
Operational temperature (℃) Frontal: Lateral: Rear side:
Wind load (N)
670 (at 150 km/h) 180 (at 150 km/h) 560 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
153
Tri-band
Electrical downtilt (°)
DXXX-690-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.5m Model: ATR4518R13 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…….r HWMxxx……yL yL
HWMxxx…..yyR r - Red L - Left array
yyR
y - Yellow R - Right array
Pattern sample for reference
690 - 960 MHz 154
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
r
DXXX-690-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4518R6 Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45° 0 - 10 , continuously adjustable, each band separately at mid Tilt
15.5
15.9
16.0
16.1
17.1
17.5
17.8
18.3
15.5 ± 0.5
15.8 ± 0.5
15.8 ± 0.5
16.0 ± 0.6
17.1 ± 0.5
17.5 ± 0.4
17.7 ± 0.5
18.2 ± 0.4
> 18
> 18
> 18
> 18
> 19
> 19
> 19
> 19
Horizontal 3dB beam width (°)
65 ± 1.7
65 ± 1.4
65 ± 1.7
65 ± 2.4
65 ± 4.3
64 ± 3.2
63 ± 4.4
62 ± 4.1
Vertical 3dB beam width (°)
10.3± 0.7
9.5 ± 0.5
9.2 ± 0.6
8.6 ± 0.5
7.1 ± 0.5
6.5 ± 0.5
5.8 ± 0.4
5.3 ± 0.2
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
Tri-band
Electrical downtilt (°)
< 1.5
VSWR Cross polar isolation (dB)
≥ 28
≥ 28 ≥ 30 (690 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 26
> 26
> 26
> 26
> 27
> 27
> 27
> 27
> 18
> 18
> 18
> 18
> 18
> 18
> 17
> 17
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2022 x 359 x 178
Packing dimensions (H x W x D) (mm)
2400 x 430 x 255
Antenna weight (kg)
28.5
Clamps weight (kg)
3.6 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N) Max. operational wind speed (km/h)
930 (at 150 km/h) 255 (at 150 km/h) 755 (at 150 km/h) 200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
155
2022
41.0 (included clamps)
1355
Antenna packing weight (kg)
DXXX-690-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m Model: ATR4518R6 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx..….r HWMxxx….yL
yL
yyR
HWMxxx..yyR r - Red L - Left array
y - Yellow R - Right array
Pattern sample for reference
790 - 960 MHz
156
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
r
DXXX-690-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4518R11 Antenna Specifications Electrical Properties 690 - 960 Frequency range (MHz)
690 - 803
790 - 862
2 x (1710 - 2690)
824 - 894
1710 1990
880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable, each band separately
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
16.5
16.7
16.8
17.0
17.1
17.5
17.8
18.2
16.4 ± 0.4
16.6 ± 0.3
16.7 ± 0.2
16.8 ± 0.4
17.1 ± 0.5
17.5 ± 0.4
17.8 ± 0.5
18.2 ± 0.3
> 17
> 17
> 17
> 17
> 19
> 19
> 19
> 19
Tri-band
at mid Tilt
Horizontal 3dB beam width (°)
66 ± 1.3
66 ± 1.4
65 ± 1.3
65 ± 1.9
65 ± 4.6
64 ± 4.1
63 ± 3.4
62 ± 4.1
Vertical 3dB beam width (°)
9.0 ± 0.6
8.3 ± 0.4
7.5 ± 0.4
7.2 ± 0.4
7.1 ± 0.5
6.5 ± 0.5
5.8 ± 0.3
5.3 ± 0.2
< 1.5
VSWR Cross polar isolation (dB)
≥ 28
≥ 28 ≥ 30 (690 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 27
> 27
> 27
> 27
> 27
> 27
> 27
> 27
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2523 x 359 x 178
Packing dimensions (H x W x D) (mm)
2900 x 430 x 255
Antenna weight (kg)
32.3
Clamps weight (kg)
3.6 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
1200 (at 150 km/h) 325 (at 150 km/h) 1000 (at 150 km/h)
Max. operational wind speed (km/h)
2523
49.0 (included clamps)
1930
Antenna packing weight (kg)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
157
DXXX-690-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m Model: ATR4518R11 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx..….r HWMxxx….yL yL
HWMxxx..yyR r - Red L - Left array
yyR
y - Yellow R - Right array r
Pattern sample for reference
690 - 960 MHz
158
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M Model: ATR451807
Antenna Specifications Electrical Properties 3 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
1920 - 2170
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
17.4
17.7
17.9
17.9
17.3 ± 0.4
17.5 ± 0.4
17.7 ± 0.4
17.7 ± 0.4
> 20
> 18
> 18
> 17
66 ± 3
65 ± 3
63 ± 4
61 ± 3
7.4 ± 0.4
6.9 ± 0.4
6.5 ± 0.6
6.0 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 25
> 26
> 27
> 27
> 21
> 21
> 20
> 18
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Tri-band
Gain (dBi)
2170 - 2200
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 376 x 99
Packing dimensions (H x W x D) (mm)
1680 x 440 x 170
Antenna weight (kg)
16.3
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
25.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 735 (at 150 km/h) Lateral: 70 (at 150 km/h) Rear side: 690 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
159
DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M Model: ATR451807
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20M11
Remote electrical tilt module, a couple of AISG connectors
0.7 kg
1 (Separate packing)
62
106
49
1710 - 2200 Left X +45°
-45°
7/16 (F)
7/16 (F)
+45°
7/16 (F)
-45°
7/16 (F)
1710 - 2200 Right X +45°
-45°
7/16 (F)
7/16 (F)
Pattern sample for reference
1710 - 2200 MHz (Left) 160
1710 - 2200 MHz (Center)
1710 - 2200 MHz (Right)
1365
1710 - 2200 Center X
1262
Unit: mm
DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4518R15 Antenna Specifications Electrical Properties 3 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
1920 - 2170
Polarization
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
17.4
17.7
17.9
17.9
17.3 ± 0.4
17.5 ± 0.4
17.7 ± 0.4
17.7 ± 0.4
> 20
> 18
> 18
> 17
66 ± 3
65 ± 3
63 ± 4
61 ± 3
7.4 ± 0.4
6.9 ± 0.4
6.5 ± 0.6
6.0 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 28
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
> 25
> 26
> 27
> 27
> 21
> 21
> 20
> 18
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Tri-band
at mid Tilt
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 376 x 99
Packing dimensions (H x W x D) (mm)
1680 x 440 x 170
Antenna weight (kg)
16.7
Clamps weight (kg)
3.0 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1365
25.9 (Included clamps)
1262
Antenna packing weight (kg)
Frontal: 735 (at 150 km/h) Lateral: 70 (at 150 km/h) Rear side: 690 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
161
DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4518R15 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx..….....bL HWMxxx…….bbC HWMxxx...…bbbR
bL
bbC
b – Blue L - Left array R - Right array C - Center array
Pattern sample for reference
1710 - 2200 MHz (Left) 162
1710 - 2200 MHz (Center)
1710 - 2200 MHz (Right)
bbbR
DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4518R3 Antenna Specifications Electrical Properties 1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
1710 - 2170
2200 - 2490
2490 - 2690
Polarization
1710 - 1990
1920 - 2170
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable , each band separately
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.5
17.9
18.2
18.2
17.5
17.8
18.2
17.3 ± 0.5
17.7 ± 0.5
18.0 ± 0.5
18.1 ± 0.5
17.4 ± 0.4
17.6 ± 0.4
18.0 ± 0.5
> 17
> 17
> 18
> 17
> 17
> 18
> 18
Horizontal 3dB beam width (°)
66 ± 3.8
64 ± 3.2
62 ± 2.3
60 ± 3.8
66 ± 3.4
64 ± 3.1
60 ± 3.5
Vertical 3dB beam width (°)
6.5 ± 0.4
6.0 ± 0.5
5.3 ± 0.3
4.8 ± 0.3
6.4 ± 0.5
5.9 ± 0.4
4.6 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
≥ 30 (1710 - 2170 // 1710 - 2690 MHz) ≥ 30 (1710 - 2170 // 2490 - 2690 MHz) ≥ 30 (1710 - 2690 // 2490 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
Tri-band
at mid Tilt
0°
> 25
> 25
> 18
> 18
> 26
> 25
> 25
> 26
> 25
> 18
> 18
> 18
> 18
> 18
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1445 x 299 x 109
Packing dimensions (H x W x D) (mm)
1735 x 350 x 180
Antenna weight (kg)
16.2
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
23.97 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 520 (at 150 km/h) Lateral: 105 (at 150 km/h) Rear side: 600 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1445
50 - 115
1331
Mast diameter supported (mm)
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
163
DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m Model: ATR4518R3 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0/3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol swithing function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx.…bL HWMxxx.…yL bL yL
HWMxxx…yyR b - Blue L - Left array
y - Yellow R - Right array
Pattern sample for reference
1710 - 2690 MHz
164
1710 - 2170 MHz
2490 - 2690 MHz
yyR
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-18i/18i/18iM/M/M Model: ATR451714v01 Antenna Specifications Electrical Properties 3 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
Polarization
2490 - 2690
+45° , -45° 0 - 12 , continuously adjustable, each band separately 17.6
18.0
18.4
18.6
17.4 ± 0.4
17.8 ± 0.4
18.1 ± 0.4
18.3 ± 0.5
> 19
> 22
> 20
> 19
Horizontal 3dB beam width (°)
66 ± 5.5
65 ± 4.2
64 ± 3.8
60 ± 3.2
Vertical 3dB beam width (°)
6.7 ± 0.5
6.1 ± 0.3
5.4 ± 0.4
5.0 ± 0.2
Gain (dBi)
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
> 27
> 27
> 29
> 29
> 26
> 25
> 23
> 23
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1365 x 376 x 99
Packing dimensions (H x W x D) (mm)
1680 x 440 x 170
Antenna weight (kg)
17.4
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
27.1 (included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: Lateral: Rear side:
735 (at 150 km/h) 70 (at 150 km/h) 690 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
6 x 7/16 DIN Female Bottom
165
Tri-band
Electrical downtilt (°)
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-18i/18i/18iM/M/M Model: ATR451714v01 Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20M11
Remote electrical tilt module, a couple of AISG connectors
0.7 kg
1 (Separate packing)
62
106
1710 - 2690 Left X +45°
+45°
-45°
-45°
1365
Unit: mm 1710 - 2690 Center X
1262
49
1710 - 2690 Right X +45°
-45°
7/16 (F) 7/16 (F) 7/16 (F) 7/16 (F) 7/16 (F) 7/16 (F)
Pattern sample for reference
1710 - 2690 MHz (Left) 166
1710 - 2690 MHz (Center)
1710 - 2690 MHz (Right)
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with Integrated 3 RCUs - 1.4m Model: ATR4518R14 Antenna Specifications Electrical Properties 3 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45° 0 - 12 , continuously adjustable, each band separately 17.6
18.0
18.4
18.6
17.4 ± 0.4
17.8 ± 0.4
18.1 ± 0.4
18.3 ± 0.5
> 19
> 22
> 20
> 19
Horizontal 3dB beam width (°)
66 ± 5.5
65 ± 4.2
64 ± 3.8
60 ± 3.2
Vertical 3dB beam width (°)
6.7 ± 0.5
6.1 ± 0.3
5.4 ± 0.4
5.0 ± 0.2
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30
Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
Tri-band
Electrical downtilt (°)
0°
> 27
> 27
> 29
> 29
> 26
> 25
> 23
> 23
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1365 x 376 x 99
Packing dimensions (H x W x D) (mm)
1680 x 440 x 170
Antenna weight (kg)
17.8
Clamps weight (kg)
3.0 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
735 (at 150 km/h) 70 (at 150 km/h) 690 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1365
27.5 (included clamps)
1262
Antenna packing weight (kg)
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
167
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with Integrated 3 RCUs - 1.4m Model: ATR4518R14 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx..….yL HWMxxx…..yyC yL
HWMxxx….yyyR y – Yellow R - Right array
yyC
L - Left array C - Center array
Pattern sample for reference
1710 - 2690 MHz (Left) 168
1710 - 2690 MHz (Center)
1710 - 2690 MHz (Right)
yyyR
Frequency 3dB Horizontal Range (MHz) beam width (°)
Gain (dBi)
Electrical Tilt Method downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
790-862/ 880-960/ 1710-2690/ 1710-2690
65/65/65/65
15.5/ 16/18/18
0-10/0-10/ 0-10/0-10
EasyRET2.0
8 x 7/16 DIN-F 1999 x 349 x 166
AQU4518R5
171
R
790-862/ 880-960/ 1710-2690/ 1710-2690
65/65/65/65
16.5/ 17/18/18
0-10/0-10/ 0-10/0-10
EasyRET2.0
8 x 7/16 DIN-F 2528 x 349 x 166
AQU4518R4
173
R
690-862/ 880-960/ 1710-2690/ 1710-2690
65/65/65/65
14/14.5/ 17.5/17.5
0-12/0-12/ 0-10/0-10
EasyRET2.0
8 x 7/16 DIN-F 1499 x 359 x 178
AQU4517R4
175
R
690-803/ 824-960/ 1710-2690/ 1710-2690
65/65/65/65
14/14.5/ 17.5/17.5
0-12/0-12/ 0-10/0-10
EasyRET2.0
8 x 7/16 DIN-F 1499 x 359 x 178
AQU4518R19
177
R
690-803/ 824-960/ 1710-2690/ 1710-2690
65/65/65/65
15/16/18/18
0-10/0-10/ 0-10/0-10
EasyRET2.0
8 x 7/16 DIN-F 2022 x 359 x 178
AQU4518R17
179
R
690-960/ 690-960/ 1695-2690/ 1695-2690
65/65/65/65
16/16/18/18
0-10/0-10/ 2-12/2-12
EasyRET2.0
8 x 7/16 DIN-F 2099 x 429 x 196
AQU4518R24
181
S
690-960/ 690-960/ 1695-2690/ 1695-2690
65/65/65/65
17/17/18/18
0-10/0-10/ 2-12/2-12
EasyRET2.0
8 x 7/16 DIN-F 2769 x 429 x 196
AQU4518R25
183
S
690-960/ 1427-2200/ 1695-2690/ 1695-2690
65/65/65/65
16/17/18/18
0-10/2-12/ 2-12/2-12
EasyRET2.0
185
SS
790-960/ 1710-2690/ 1710-2170/ 2490-2690
65/65/65/65
15/17.5/ 17.5/17.5
0-14/0-10/ 0-10/0-10
EasyRET1.0
8 x 7/16 DIN-F 1499 x 349 x 166
AQU4518R7
186
T
790-960/ 1710-2690/ 1710-2170/ 2490-2690
65/65/65/65
16/18/18/18
0-10/0-10/ 0-10/0-10
EasyRET1.0
8 x 7/16 DIN-F 1999 x 349 x 166
AQU4518R0
189
T
** Preliminary Issue
8 x 4.3-10 Female
2000 x 369 x 149 **AQU4518R22
Quad-band
B - 4. Quad-band Antenna
B - 4. Quad-band Antenna
Frequency 3dB Horizontal Range (MHz) beam width (°)
Electrical Tilt Method downtilt (°)
Gain (dBi)
Connector
Dimension (mm)
Model
Page
Array Symbol
790-960/ 1710-2690/ 1710-2170/ 2490-2690
65/65/65/65
17/18/18/18
0-10/0-10/ 0-10/0-10
EasyRET1.0
8 x 7/16 DIN-F 2528 x 349 x 166
AQU4518R1
192
T
698-960/ 1710-2690/ 1710-2690/ 1710-2690
65/65/65/65
17/ 18/18/17.5
0-10/0-10/ 0-10/0-10
EasyRET1.0
8 x 7/16 DIN-F 2688 x 349 x 166
AQU4518R9
195
U
690-960/ 1710-2690/ 1710-2690/ 1710-2690
65/65/65/65
15/17.5/ 17.5/17.5
0-14/2-12/ 2-12/2-12
EasyRET2.0
8 x 7/16 DIN-F 1520 x 369 x 149
AQU4518R14
197
TT
690-960/ 1710-2690/ 1710-2690/ 1710-2690
65/65/65/65
16/18/18/18
0-10/2-12/ 2-12/2-12
EasyRET2.0
8 x 7/16 DIN-F 2000 x 369 x 149
AQU4518R11
200
TT
1710-2170/ 1710-2170/ 2496-2690/ 2496-2690
65/65/65/65
18/ 18/18/18
0-12/0-12/ 0-12/0-12
EasyRET2.0
8 x 7/16 DIN-F 1490 x 299 x 109
AQU4518R8
203
V
1710-2690/ 1710-2690/ 1710-2690/ 1710-2690
65/65/65/65
18/18/18/18
0-12/0-12/ 0-12/0-12
EasyRET2.0
8 x 7/16 DIN-F 1499 x 449 x 115
AQU4518R21
205
VV
** Preliminary Issue
Array Symbol Type
Type R
Type S
Type SS
Type TT
Type T
Type U
Type V
Type VV
yLT yL
yyR
Ly1
Ry2
Ly1
Cg1
Ry2
Ly1
Cy2
Ry3
bL yL
yyR
bL yL bbR yyR yyLB
r
rr
Lr1
Rr2
r1
r1
r
yyyRB r
yL
yyCL
yyyCR
yyyyR
DXXXX-790-862/880-960/1710-2690/1710-2690-65/65/65/6515.5i/16i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs-2.0m Model: AQU4518R5 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable, each band separately
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.5
15.8
17.3
17.8
18.0
18.2
15.3 ± 0.3
15.7 ± 0.4
17.2 ± 0.5
17.6 ± 0.4
17.9 ± 0.4
18.1 ± 0.5
> 16
> 17
> 16
> 17
> 17
> 17
65 ± 2.0
62 ± 2.6
65 ± 5.0
62 ± 3.5
60 ± 3.5
60 ± 4.0
10.5 ± 0.7
9.4 ± 0.6
5.8 ± 0.3
5.4 ± 0.4
4.8 ± 0.2
4.3 ± 0.2
> 25
> 25
> 25
> 18
> 18
> 18
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28
≥ 28 ≥ 28 (790 - 862 // 880 - 960 MHz) ≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
Quad-band
VSWR
0°
Max. power per input (W)
> 25
> 25
> 25
> 18
> 18
> 18
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Total power (W)
800 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 415 x 240
Antenna weight (kg)
29.8
Clamps weight (kg)
3.6 (2 units)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 730 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
1999
43.6 (Included clamps)
Mast diameter supported (mm)
1892
Antenna packing weight (kg)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1kg
1 (Separate packing)
171
DXXXX-790-862/880-960/1710-2690/1710-2690-65/65/65/6515.5i/16i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs-2.0m Model: AQU4518R5 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx…..rr HWMxxx…..yL
yL
yyR
HWMxxx...yyR r - Red L - Left array
y - Yellow R - Right array
r
Pattern sample for reference
790 - 862 MHz
172
880 - 960 MHz
1710 - 2690 MHz
rr
DXXXX-790-862/880-960/1710-2690/1710-2690-65/65/65/6516.5i/17i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs-2.6m Model: AQU4518R4 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable, each band separately 16.2
16.7
17.3
17.8
18.0
18.2
16.1 ± 0.5
16.5 ± 0.4
17.2 ± 0.5
17.6 ± 0.4
17.8 ± 0.4
18.1 ± 0.5
> 16
> 16
> 16
> 17
> 17
> 17
Horizontal 3dB beam width (°)
65 ± 2.2
62 ± 2.5
65 ± 5.0
62 ± 3.5
60 ± 3.5
60 ± 4.0
Vertical 3dB beam width (°)
8.6 ± 0.7
7.6 ± 0.6
5.8 ± 0.4
5.4 ± 0.4
4.8 ± 0.2
4.3 ± 0.2
≥ 28
≥ 28
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
< 1.5
Cross polar isolation (dB)
Quad-band
VSWR
≥ 28 ≥ 28 (790 - 862 // 880 - 960 MHz) ≥ 30 (790 - 862 // 1710 - 2690 MHz) ≥ 30 (880 - 960 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB)
> 24
> 24
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
>18
> 18
0°
500 (at 50℃ ambient temperature)
Max. power per input (W) Total power (W)
250 (at 50℃ ambient temperature) 1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2885 x 420 x 245
Antenna weight (kg)
34.0
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
49.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 920 (at 150 km/h) Lateral: 305 (at 150 km/h) Rear side: 955 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
173
DXXXX-790-862/880-960/1710-2690/1710-2690-65/65/65/6516.5i/17i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs-2.6m Model: AQU4518R4 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...r HWMxxx…..rr HWMxxx…..yL
yL
yyR
HWMxxx...yyR r - Red L - Left array
y - Yellow R - Right array
r
Pattern sample for reference
790 - 862 MHz
174
880 - 960 MHz
1710 - 2690 MHz
rr
DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4517R4 Antenna Specifications Electrical Properties 690 - 862
Frequency range (MHz)
690 - 803
2 x (1710 - 2690)
880 - 960
790 - 862
Polarization
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45° 0 - 12 , continuously adjustable, each band separately
Electrical downtilt (°) at mid Tilt Gain (dBi)
over all Tilts
13.8
13.9
14.2
17.4
17.8
18.2
18.3
14.0 ±0.5
14.1 ±0.3
14.3 ±0.3
17.3 ±0.5
17.7 ±0.5
18.1 ±0.5
18.2 ±0.4
> 16
> 16
> 15
> 18
> 18
> 18
> 18
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
0 - 10 , continuously adjustable, each band separately
66 ±1.7
64 ±2.6
64 ±3.5
65 ±3.9
63 ±3.3
62 ±4.8
60 ±4.5
15.2 ±2.3
13.3 ±1.8
11.8 ±2.0
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ±0.3
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Quad-band
VSWR
≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 30 (690 - 862 // 1710 - 2690 MHz) ≥ 30 (880 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB)
> 25
> 25
> 25
> 30
> 28
> 28
> 28
Cross polar ratio (dB)
> 18
> 20
> 20
> 19
> 19
> 20
> 20
0°
Max. power per input (W)
300 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
700 (at 50℃ ambient temperature)
Total power (W) Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1499 x 359 x 178
Packing dimensions (H x W x D) (mm)
1880 x 425 x 255 27.1 3.6 (2 units)
Packing weight (kg)
40.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
670 (at 150 km/h) 180 (at 150 km/h) 560 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1499
Bracket weight (kg)
1347
Antenna net weight (kg)
106
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16°
2.1 kg
1 (Separate packing)
175
DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4517R4 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…...yL HWMxxx……r HWMxxx…..rr
yL
yyR
HWMxxx...yyR r - Red L - Left array
y - Yellow R - Right array
r
Pattern sample for reference
690 - 862 MHz
176
880 - 960 MHz
1710 - 2690 MHz
rr
DXXXX-690-803/824-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R19 Antenna Specifications Electrical Properties Frequency range (MHz)
690 - 803
824 - 960 824 - 894
2 x (1710 - 2690)
880 - 960
Polarization
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45° 0 - 12 , continuously adjustable , each band separately
Electrical downtilt (°) at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
0 - 10 , continuously adjustable , each band separately
13.8
13.9
14.2
17.4
17.8
18.2
18.3
14.0 ±0.5
14.1 ±0.3
14.3 ±0.3
17.3 ±0.5
17.7 ±0.5
18.1 ±0.5
18.2 ± 0.4
> 16
> 16
> 15
> 18
> 18
> 18
> 18
66 ±1.7
65 ±2.3
64 ±3.5
65 ±3.9
63 ±3.3
62 ±4.8
60 ± 4.5
15.2 ±2.3
12.8 ±2.0
11.8 ±2.0
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ± 0.3
> 28
> 28
> 28
> 19
> 20
> 20
< 1.5 ≥ 28
≥ 28
≥ 28 ≥ 28 (690 - 803 // 824 - 960 MHz) ≥ 30 (690 - 803 // 1710 - 2690 MHz) ≥ 30 (824 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
Quad-band
VSWR Cross polar isolation (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 30
> 18
> 18
> 20
> 19
300 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
700 (at 50℃ ambient temperature)
Total power (W) Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1499 x 359 x 178
Packing dimensions (H x W x D) (mm)
1880 x 425 x 250
Antenna weight (kg)
28.0
Clamps weight (kg)
3.6 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 670 (at 150 km/h) Lateral: 180 (at 150 km/h) Rear side: 560 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1999
41.7 (included clamps)
1892
Antenna packing weight (kg)
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
177
DXXXX-690-803/824-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R19 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…..yL HWMxxx…….r yL
HWMxxx……rr
yyR
HWMxxx…yyR r - Red L - Left array
y - Yellow R - Right array
Pattern sample for reference
690 - 803 MHz
178
824 - 960 MHz
1710 - 2690 MHz
r
rr
DXXXX-690-803/824-960/1710-2690/1710-2690/-65/65/65/6515i/16i/18i/18i/-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R17 Antenna Specifications Electrical Properties Frequency range (MHz)
690 - 803
824 - 960
824 - 894
2 x (1710 - 2690)
880 - 960
1710 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately at mid tilt
Gain (dBi)
over all tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
14.7
15.1
15.4
17.2
17.5
17.8
17.9
14.8 ±0.5
15.1 ±0.5
15.4 ±0.3
17.1 ±0.4
17.4 ±0.5
17.8 ±0.5
17.9 ±0.4
> 18
> 18
> 18
> 18
> 17
> 17
> 17
67 ±3.0
63 ±2.7
63 ±3.0
66 ±3.9
64 ±3.3
63 ±4.8
60 ±4.5
12.0 ±1.0
10.1 ±0.9
9.4 ±0.8
6.3 ±0.5
5.7 ±0.4
5.1 ±0.5
4.7 ±0.2
VSWR
< 1.5 ≥ 28
≥ 28
≥ 28
Quad-band
Cross polar isolation (dB)
≥ 28 (690 - 803 // 824 - 960 MHz) ≥ 30 (690 - 803 // 1710 - 2690 MHz) ≥ 30 (824 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
0°
Max. power per input (W)
> 27
> 25
> 27
> 30
> 29
> 27
> 26
> 16
> 19
> 19
> 18
> 18
> 18
> 18
360 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2022 x 359 x 178
Packing dimensions (H x W x D) (mm)
2400 x 430 x 255
Antenna weight (kg)
32.7
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
106
47.4 (included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
2022
Mast diameter supported (mm)
Frontal: 930 (at 150 km/h) Lateral: 255 (at 150 km/h) Rear side: 755 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
1918
-40 .. +65
Operational temperature (℃)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
179
DXXXX-690-803/824-960/1710-2690/1710-2690/-65/65/65/6515i/16i/18i/18i/-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R17 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…..yL HWMxxx….…r HWMxxx…...rr
yL
yyR
HWMxxx...yyR r - Red L - Left array
y - Yellow R - Right array
r
Pattern sample for reference
690 - 803 MHz
180
824 - 960 MHz
1710 - 2690 MHz
rr
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with Integrated RCUs - 2.0m Model: AQU4518R24 Antenna Specifications Electrical Properties 2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
2 x (1695 - 2690)
824 - 894
1695 1990
880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable, each band separately
15.0
15.5
15.8
16.0
17.0
17.2
17.7
18.1
14.7 ± 0.5
15.3 ± 0.5
15.6 ± 0.5
15.8 ± 0.5
16.8 ± 0.5
17.1 ± 0.5
17.5 ± 0.5
17.9± 0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ± 5
65 ± 5
62 ± 5
60 ± 5
65 ± 5
63 ± 5
61 ± 5
60 ± 5
10.5 ± 0.9
9.5 ± 0.8
9.2 ± 0.7
8.5 ± 0.7
6.8 ± 0.7
5.8 ± 0.5
5.3 ± 0.4
5.0 ± 0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 23
> 25
> 26
> 26
> 26
> 27
> 27
> 28
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
500 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2195 x 530 x 270
Antenna weight (kg)
32.8
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
46.5 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1273 1999
Mast diameter supported (mm)
Frontal: 910 (at 150 km/h) Lateral: 265 (at 150 km/h) Rear side: 910 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
181
Quad-band
0 - 10 , continuously adjustable, each band separately
Electrical downtilt (°)
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with Integrated RCUs - 2.0m Model: AQU4518R24 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……Ly1 HWMxxx……Lr 1 HWMxxx…...Rr 2
Ly1
Ry2
Lr1
Rr2
HWMxxx…...Ry2 r - Red y - Yellow L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
182
1695 - 2690 MHz
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m Model: AQU4518R25 Antenna Specifications Electrical Properties 2 x (690 - 960) Frequency range (MHz)
690 - 803
790 - 862
2 x (1695 - 2690)
824 - 894
1695 1990
880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45° 0 - 10, continuously adjustable, each band separately at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
2 - 12, continuously adjustable, each band separately
15.8
16.4
16.7
17.0
17.0
17.2
17.7
18.1
15.5 ± 0.5
16.3 ± 0.5
16.5 ± 0.5
16.7 ± 0.5
16.8 ± 0.5
17.1 ± 0.5
17.5 ± 0.5
17.9 ± 0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
65 ± 5
63 ± 5
61 ± 5
60 ± 5
6.8 ± 0.7
5.8 ± 0.5
5.3 ± 0.4
5.0 ± 0.5
68 ± 5
65 ± 5
60 ± 5
58 ± 5
8.8 ± 0.7
8.0 ± 0.6
7.8 ± 0.5
7.5 ± 0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
Quad-band
Electrical downtilt (°)
> 25
> 26
> 26
> 26
> 26
> 27
> 27
> 28
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
500 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2550 x 429 x 196
Packing dimensions (H x W x D) (mm)
2770 x 530 x 275
Antenna weight (kg)
37.5
Clamps weight (kg)
5.8 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1787
58.0 (Included clamps)
Frontal: 1200 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 1200 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
183
2550
Antenna packing weight (kg)
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m Model: AQU4518R25 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……Ly1 HWMxxx……Lr 1 HWMxxx…...Rr 2
Ly1
Ry2
Lr1
Rr2
HWMxxx…...Ry2 r - Red y - Yellow L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
184
1695 - 2690 MHz
DXXXX-690-960/1695-2690/1695-2690/1427-2200-65/65/65/65-16i/18i/18i/17i- M/M/M/M-R EasyRET Quad-Band Antenna with Integrated RCUs - 2.0m Model: AQU4518R22 Preliminary Issue Antenna Specifications Electrical Properties Frequency range (MHz)
690 - 960
2 x (1695 - 2690)
1427 - 2200
Electrical downtilt (°)
0 - 10
2 - 12
2 - 12
Gain (dBi)
15.8
18
17
Side lobe suppression for first side lobe above main beam (Typ.) (dB)
16
16
16
Horizontal 3dB beam width (°)
65
65
68
Vertical 3dB beam width (°)
9.8
6.5
8
Front to back ratio, copolar (dB)
Typ. 25
Typ. 25
Typ. 25
Cross polar ratio (dB)
Typ.18
Typ.18
Typ. 18
< 1.5
0°
Intermodulation IM3 (dBc)
Quad-band
VSWR
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2000 x 369 x 149
Packing dimensions (H x W x D) (mm)
2350 x 450 x 230
Antenna net weight (kg)
29
Mechanical downtilt (°)
0 - 12
Connector RET type
RET protocols
8 x 4.3-10 Female Integrated RET
AISG 2.0 / 3GPP
185
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R7 Antenna Specifications Electrical Properties 790 - 960 (r)
Frequency range (MHz)
790 - 862
824 - 894
Polarization Electrical downtilt (°) Gain (dBi)
880 - 960
+45° , -45° 0 - 14 , continuously adjustable at mid Tilt over all Tilts
14.3
14.5
14.7
14.2 ± 0.4
14.4 ± 0.4
14.6 ± 0.5
> 16
> 16
> 16
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
65 ± 3.4
64 ± 3.7
62 ± 4.8
15.5 ± 0.9
15.0 ± 0.9
14.0 ± 1.0
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 24
> 24
> 24
> 20
> 20
> 20
Max. power per input (W)
500 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (yyR)
Frequency range (MHz)
1710 - 1990
1920 - 2200
1710 - 2170 (bL)
2200 - 2490
Polarization
1710 - 1990
1920 - 2170
2490 - 2690 (yL)
+45° , -45°
Electrical downtilt (°) Gain (dBi)
2490 - 2690
0 - 10 , continuously adjustable , each band separately at mid Tilt
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.2
17.8
18.0
17.9
17.1
17.5
17.3
17.1 ± 0.4
17.6 ± 0.4
17.9 ± 0.4
17.7 ± 0.5
17.0 ± 0.4
17.3 ± 0.4
17.3 ± 0.5
> 16
> 16
> 16
> 15
> 16
> 16
> 16
Horizontal 3dB beam width (°)
63 ± 4.0
62 ± 4.0
60 ± 2.3
60 ± 4.8
63 ± 4.8
62 ± 3.7
60 ± 4.5
Vertical 3dB beam width (°)
6.2 ± 0.4
5.8 ± 0.4
5.2 ± 0.3
4.7 ± 0.4
6.2 ± 0.5
5.8 ± 0.5
4.7 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 30
Interband isolation (dB) Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 20
> 20
> 20
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power: 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
186
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-15i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R7
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1499 x 349 x 166
Packing dimensions (H x W x D) (mm)
1825 x 410 x 235
Antenna weight (kg)
23.2
Clamps weight (kg)
3.0 (2 units) 32.3 (Included clamps) 50 - 115 Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 505 (at 150 km/h) Lateral: 165 (at 150 km/h) Rear side: 540 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
Quad-band
Mast diameter supported (mm) Radome material
1395 1499
Antenna packing weight (kg)
106
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
790 - 960 MHz
1710 - 2690 MHz
1710 - 2170 MHz
2490 - 2690 MHz
187
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-15i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R7 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx…...r HWMxxx….bL HWMxxx….yL
bL yL
yyR
HWMxxx...yyR r - Red b - Blue y - Yellow L - Left array R - Right array
188
r
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R0 Antenna Specifications Electrical Properties 790 - 960 (r)
Frequency range (MHz)
790 - 862
824 - 894
Polarization Electrical downtilt (°)
0 - 10 , continuously adjustable at mid Tilt over all Tilts
15.9
16.1
16.3
15.8 ± 0.4
16.0 ± 0.4
16.2 ± 0.5
> 17
> 17
> 17
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
65 ± 1.5
64 ± 2.0
62 ± 3.1
10.1 ± 0.4
9.8 ± 0.5
9.3 ± 0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 18
> 18
> 18
Max. power per input (W)
500 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Quad-band
Gain (dBi)
880 - 960
+45° , -45°
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (yyR)
Frequency range (MHz)
1710 - 1990
1920 - 2200
1710 - 2170 (bL)
2200 - 2490
Polarization
1710 - 1990
1920 - 2170
2490 - 2690 (yL)
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
2490 - 2690
0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.3
17.8
18.0
18.2
17.2
17.7
17.7
17.1 ± 0.5
17.7 ± 0.5
17.9 ± 0.5
18.1 ± 0.5
17.0 ± 0.4
17.5 ± 0.4
17.6 ± 0.5
> 17
> 17
> 18
> 18
> 17
> 17
> 17
Horizontal 3dB beam width (°)
65 ± 2.5
62 ± 4.3
60 ± 4.4
60 ± 5.0
65 ± 3.8
62 ± 4.0
60 ± 5.0
Vertical 3dB beam width (°)
5.8 ± 0.3
5.4 ± 0.4
4.8 ± 0.2
4.3 ± 0.3
5.8 ± 0.3
5.4 ± 0.4
4.3 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 18
> 18
> 18
> 18
Max. power per input (W)
250 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power : 800 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
189
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R0 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 415 x 240
Antenna weight (kg)
28.0
Clamps weight (kg)
3.6 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1999
40.3 (Included clamps)
1892
Antenna packing weight (kg)
Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 730 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
790 - 960 MHz
1710 - 2170 MHz
190
1710 - 2690 MHz
2490 - 2690 MHz
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx…...r HWMxxx….bL HWMxxx….yL
bL yL
yyR
HWMxxx...yyR r - Red b - Blue y - Yellow L - Left array R - Right array
r
191
Quad-band
RET connector
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/6517i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m Model: AQU4518R1 Antenna Specifications Electrical Properties 790 - 960 (r)
Frequency range (MHz)
790 - 862
824 - 894
Polarization
0 - 10 , continuously adjustable
Electrical downtilt (°) Gain (dBi)
880 - 960
+45° , -45°
16.8
17.0
17.3
16.6 ±0.4
16.9 ±0.4
17.2 ±0.5
> 17
> 17
> 17
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)
65 ±2.0
64 ±2.5
62 ±2.8
Vertical 3dB beam width (°)
8.6 ±0.4
8.2 ±0.4
7.6 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 28
> 28
> 28
Cross polar ratio (dB)
> 18
> 18
> 18
0°
Max. power per input (W)
500 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (yyR)
Frequency range (MHz)
1710 - 1990
1920 - 2200
1710 - 2170 (bL)
2200 - 2490
Polarization
1710 - 1990
1920 - 2170
2490 - 2690 (yL)
+45° , -45°
Electrical downtilt (°) Gain (dBi)
2490 - 2690
0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.3
17.8
18.0
18.2
17.2
17.7
17.7
17.3 ±0.6
17.6 ±0.6
17.9 ±0.6
18.1 ±0.6
17.1 ±0.5
17.5 ±0.5
17.5 ±0.4
> 16
> 17
> 18
> 18
> 16
> 17
> 17
Horizontal 3dB beam width (°)
65 ±5.0
62 ±4.8
60 ±3.9
60 ±5.0
65 ±3.7
62 ±4.3
60 ±4.8
Vertical 3dB beam width (°)
5.8 ±0.3
5.4 ±0.4
4.8 ±0.2
4.3 ±0.3
5.8 ±0.4
5.3 ±0.4
4.3 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 28
> 28
Cross polar ratio (dB)
> 18
> 18
0°
> 28
> 28
> 28
> 28
> 28
> 18
> 18
> 18
> 18
> 18
Max. power per input (W)
250 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
192
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/6517i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m Model: AQU4518R1
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2885 x 420 x 240
Antenna weight (kg)
32.0
Clamps weight (kg)
3.6 (2 units) 47.2 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2528
Antenna packing weight (kg)
Quad-band
Max. operational wind speed (km/h)
2424
Frontal: 920 (at 150 km/h) Lateral: 305 (at 150 km/h) Rear side: 955 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
790 - 960 MHz
1710 - 2690 MHz
1710 - 2170 MHz
2490 - 2690 MHz
193
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/6517i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m Model: AQU4518R1 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx…...r HWMxxx….bL HWMxxx….yL
bL yL
yyR
HWMxxx...yyR r - Red b - Blue y - Yellow L - Left array R - Right array
194
r
DXXXX-698-960/1710-2690/1710-2690/1710-2690-65/65/65/6517i/18i/18i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m Model: AQU4518R9 Antenna Specifications Electrical Properties 698 - 960
Frequency range (MHz)
698 - 803
790 - 862
3 x (1710 - 2690)
824 - 894
880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately 16.2
at mid Tilt
over all Tilts
16.7
17.0
at mid Tilt
Bottom
over all Tilts
17.1
17.3
17.1
17.6
16.9 ±0.5
17.1 ±0.3
17.0 ±0.4
17.4 ±0.5
16.8
17.1
16.8
17.3
16.7 ±0.5
17.0 ±0.4
16.7 ±0.4
17.1 ±0.5
> 17
> 17
>17
> 16
at mid Tilt
Top
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
> 17
> 18
> 17
> 17
Horizontal 3dB beam width (°)
67 ±1.9
66 ±3.5
65 ±2.4
62 ±3.3
63 ±3.4
62 ±2.8
61 ±3.7
60 ±3.1
Vertical 3dB beam width (°)
8.8 ±0.6
8.5 ±0.4
8.0 ±0.3
7.4 ±0.3
7.4 ±0.5
6.8 ±0.5
6.0 ±0.4
5.5 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 30 (698 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB)
> 25
> 25
> 25
> 25
> 24
> 24
> 25
> 25
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 17
> 17
> 17
> 17
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
2688 x 349 x 166
Packing dimensions (H x W x D) (mm)
2960 x 435 x 250
Antenna weight (kg)
33.5
Clamps weight (kg)
3.6 (2 units) 44.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2580 2688
Antenna packing weight (kg)
Frontal: 990 (at 150 km/h) Lateral: 325 (at 150 km/h) Rear side: 1030 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
195
Quad-band
Gain (dBi)
16.5
16.1 ±0.5 16.3 ±0.4 16.5 ±0.4 16.8 ±0.4
DXXXX-698-960/1710-2690/1710-2690/1710-2690-65/65/65/6517i/18i/18i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m Model: AQU4518R9 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx……..….r HWMxxx……..yLT
yLT
HWMxxx……yyLB HWMxxx..…yyyRB r - Red L - Left array T - Top array
yyLB
yyyRB
y - Yellow R - Right array B - Bottom array
r
Pattern sample for reference
698 - 960 MHz
196
1710 - 2690 MHz (Bottom)
1710 - 2690 MHz (Top)
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R14 Antenna Specifications Electrical Properties 690 - 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable
at mid Tilt
over all Tilts
14.3
14.2
14.2
14.5
14.2 ±0.3
14.2 ±0.2
14.2 ±0.2
14.4 ±0.3
> 15
> 15
> 17
> 17
66 ±1.1
67 ±0.8
65 ±1.4
65 ±1.2
15.3 ±0.9
13.7 ±0.4
13.0 ±0.6
12.1 ±0.5
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
Quad-band
Gain (dBi)
824 - 894
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB)
> 25
> 26
> 26
> 25
Cross polar ratio (dB)
> 21
> 16
> 16
> 16
0°
Max. power per input (W)
300 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (yL) / 1710 - 2690 (yyyR) Frequency range (MHz)
1710 1990
1920 2200
Polarization
2490 2690
1710 1990
1920 2200
+45° , -45°
2200 2490
2490 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°) Gain (dBi)
2200 2490
1710 - 2690 (yyC)
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.2
17.8
17.8
18.2
17.0
17.0
17.5
18.0
17.0 ±0.5
17.7 ±0.4
17.5 ±0.3
18.1 ±0.3
16.8 ±0.5
16.8 ±0.4
17.2 ±0.4
17.8 ±0.3
> 15
> 15
> 16
> 16
> 15
> 15
> 16
> 16
Horizontal 3dB beam width (°)
66 ±5.0
63 ±3.0
60 ±3.0
60 ±2.0
64 ±4.0
63 ±3.0
63 ±3.0
60 ±4.0
Vertical 3dB beam width (°)
7.2 ±0.4
6.5 ±0.3
5.8 ±0.3
5.3 ±0.2
7.2 ±0.4
6.5 ±0.3
5.8 ±0.3
5.3 ±0.2
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 28 (690 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio, ±30° (dB)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 16
> 16
> 16
> 16
> 16
> 16
> 16
> 16
0°
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power : 700 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
197
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R14
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1520 x 369 x 149
Packing dimensions (H x W x D) (mm)
1850 x 450 x 230
Antenna net weight (kg)
106
26.8
Clamps weight (kg)
3.6 (2 units) 37 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1414 1520
Antenna packing weight (kg)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
730 (at 150 km/h) 145 (at 150 km/h) 725 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz
198
1710 - 2690 MHz
1710 - 2690 MHz
(Left & Right)
(Center)
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R14 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…......yL HWMxxx……….r HWMxxx……yyC
yL
yyC
yyyR
HWMxxx.....yyyR r - Red L - Left array R - Right array
y - Yellow C - Center array
r
199
Quad-band
RET connector
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R11 Antenna Specifications Electrical Properties 690 - 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
+45° , -45°
Electrical downtilt (°) Gain (dBi)
880 - 960
0 - 10 , continuously adjustable
at mid Tilt over all Tilts
15.4
15.7
15.9
16.1
15.3 ±0.3
15.6 ±0.2
15.8 ±0.3
16.0 ±0.4
> 15
> 15
> 15
> 15
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
68 ±1.0
67 ±1.0
67 ±1.1
65 ±2.0
10.8 ±0.9
9.5 ±0.3
9.2 ±0.3
8.5 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 28
Interband isolation (dB)
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB)
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
0°
Max. power per input (W)
300 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (Ly1) / 1710 - 2690 (Ry3)
Frequency range (MHz)
1710 - 2690 (Cy2)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable, each band separately
at mid Tilt
17.4
17.8
18.0
18.4
17.1
17.6
17.7
18.2
17.3 ±0.4
17.7 ±0.4
17.9 ±0.4
18.3 ±0.3
17.0 ±0.4
17.5 ±0.4
17.6 ±0.4
18.0 ±0.4
> 15
> 15
> 15
> 15
> 15
> 15
> 15
> 15
Horizontal 3dB beam width (°)
68 ±2.0
66 ±2.0
61 ±3.0
60 ±2.0
68 ±3.0
65 ±4.0
62 ±3.0
56 ±3.0
Vertical 3dB beam width (°)
6.9 ±0.3
5.9 ±0.3
5.3 ±0.2
4.8 ±0.2
6.4 ±0.4
5.8 ±0.3
5.7 ±0.3
4.7 ±0.2
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 28 (690 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 15
> 15
> 15
> 15
> 15
> 15
> 15
> 15
0°
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power : 700 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
200
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R11
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 369 x 149
Packing dimensions (H x W x D) (mm)
2265 x 435 x 240
Antenna net weight (kg)
106
28.8
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
43.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
985 (at 150 km/h) 195 (at 150 km/h) 980 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
Quad-band
Wind load (N)
1891 1999
-40 .. +65 Frontal: Lateral: Rear side:
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz
1710 - 2690 MHz
1710 - 2690 MHz
(Left & Right)
(Center)
201
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m Model: AQU4518R11 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……Ly1 HWMxxx……...r1 HWMxxx……Cy2
Ly1
Cy2
HWMxxx……Ry3 r - Red L - Left array R - Right array
202
y - Yellow C - Center array
r1
Ry3
DXXXX-1710-2170/1710-2170/2490-2690/2490-269065/65/65/65-18i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R8 Antenna Specifications Electrical Properties 2 x (1710 - 2170)
Frequency range (MHz)
1710 - 1990
1920 - 2170
Polarization
2 x (2490 - 2690)
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.5
17.8
18.2
17.4 ± 0.4
17.7 ± 0.4
18.1 ± 0.5
> 17
> 18
> 18
66 ± 3.5
64 ± 4.1
60 ± 3.4
6.4 ± 0.5
5.9 ± 0.4
4.6 ± 0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30 ≥ 30 (1710 - 2170 // 1710 - 2170 MHz) ≥ 30 (1710 - 2170 // 2490 - 2690 MHz) ≥ 30 (2490 - 2690 // 2490 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
Quad-band
Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
> 25 0°
> 20
> 25
> 25
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Total power (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1490 x 299 x 109
Packing dimensions (H x W x D) (mm)
1790 x 350 x 180
Antenna weight (kg)
18.7
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
25.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 535 (at 150 km/h) Lateral: 110 (at 150 km/h) Rear side: 615 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
203
DXXXX-1710-2170/1710-2170/2490-2690/2490-269065/65/65/65-18i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R8 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx......bL HWMxxx…..yL HWMxxx…bbR HWMxxx….yyR b - Blue L - Left array
y - Yellow R - Right array
Pattern sample for reference
1710 - 2170 MHz
204
2490 - 2690 MHz
bL yL bbRyyR
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/6518i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R21 Antenna Specifications Electrical Properties 4 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
17.4
17.7
17.9
18.3
17.2 ±0.5
17.5 ±0.5
17.7 ±0.5
18.0 ±0.5
> 18
> 18
> 19
> 20
68 ±5
64 ±5
61 ±5
60 ±5
6.8 ±0.5
6.1 ±0.4
5.4 ±0.4
5.0 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
Quad-band
at mid Tilt
Gain (dBi)
> 27 0°
> 22
> 28
> 28
> 28
> 22
> 22
> 23
Max. power per input (W)
250 (at 50℃ ambient temperature)
Total power (W)
800 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1499 x 449 x 115
Packing dimensions (H x W x D) (mm)
1835 x 510 x 185
Antenna weight (kg)
24.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
36.4 (included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1499
50 - 115
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
775 (at 150 km/h) 90 (at 150 km/h) 870 (at 150 km/h)
Max. operational wind speed (km/h)
1385
Mast diameter supported (mm)
200
Survival wind speed (km/h)
250
Connector
8 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
205
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/6518i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m Model: AQU4518R21 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……….yL HWMxxx…....yyCL yL
HWMxxx…..yyyCR
yyCL
HWMxxx…...yyyyR y – Yellow R - Right array
L - Left array C - Center array
Pattern sample for reference
206
1710 - 2690 MHz
1710 - 2690 MHz
(Left)
(Center Left)
yyyCR
yyyyR
Frequency 3dB Horizontal Range (MHz) beam width (°)
Gain (dBi)
Electrical Tilt Method downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
790-862/ 880-960/ 1710-2690/ 1710-2170/ 2490-2690
65/65/ 65/65/65
15.5/16/18/ 18/18
0-10/0-10/ 0-10/0-10/ 0-10
EasyRET2.0 10 x 7/16 DIN-F 1999 x 349 x 166
APE4518R0
209
W
790-862/ 880-960/ 1710-2690/ 1710-2170/ 2490-2690
65/65/ 65/65/65
16.5/17/ 18/18/18
0-10/0-10/ 0-10/0-10/ 0-10
EasyRET2.0 10 x 7/16 DIN-F 2528 x 349 x 166
APE4518R1
212
W
690-862/ 880-960/ 1710-2690/ 1710-2690/ 1710-2690
65/65/ 65/65/65
16.5/17/ 17.5/18/18
0-10/0-10/ 0-10/0-10/ 0-10
EasyRET2.0 10 x 7/16 DIN-F 2769 x 359 x 178 **APE4518R12
215
WW
698-960/ 1710-2690/ 1710-2690/ 1710-2690/ 1710-2690
65/65/ 65/65/65
17/18/18/ 17.5/17.5
0-10/0-10/ 0-10/0-10/ 0-10
EasyRET1.0 10 x 7/16 DIN-F 2688 x 349 x 166
217
X
** Preliminary Issue
APE4517R0
Penta-band Hexa-band
B - 5. Penta-band Antenna
B - 6. Hexa-band Antenna
Frequency Range (MHz)
3dB Horizontal beam width (°)
Gain (dBi)
Electrical Tilt Method downtilt (°)
Model
Page
Array Symbol
690-862/ 880-960/ 1710-2690/ 1710-2690/ 1710-2200/ 2490-2690
65/65/65/ 65/65/65
14/14.5/ 17.5/17.5/ 17/17.5
2-14/2-14/ 2-12/2-12/ 2-12/2-12
EasyRET2.0 12 x 7/16 DIN-F 1520 x 369 x 149
ASI4518R11
219
XX
690-862/ 880-960/ 1710-2690/ 1710-2690/ 1710-2690/ 1710-2690
65/65/65/ 65/65/65
0-10/0-10/ 16.5/17/18/ 0-10/0-10/ 18/17.5/17.5 0-10/0-10
EasyRET2.0 12 x 7/16 DIN-F 2769 x 359 x 178
ASI4518R4
222
Y
690-960/ 690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690
65/65/65/ 65/65/65
17/17/17.5/ 0-10/0-10/ 17.5/17.5/ 2-12/2-12/ 17.5 2-12/2-12
EasyRET2.0 12 x 7/16 DIN-F 2769 x 429 x 196
ASI4518R10
225
Z
Connector
Dimension (mm)
** Preliminary Issue
Array Symbol Type Type W
bL yyL
Type WW
yR
r
Ly1
rr
Cy2
r1
r2
Type XX
Ry3
Ly1
Cy2
r1
r2
Type X
Type Y
Type Z
yLT
yyyRT
yLT
yyyRT
LTy1
RTy3
yyLB
yyyyRB
yyLB
yyyyRB
LBy2
RBy4
Lr1
Rr2
Rb1 Ry3
r
r
rr
DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-269065/65/65/65/65-15.5i/16i/18i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.0m Model: APE4518R0 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862 (r)
880 - 960 (rr)
Polarization
+45°, -45°
Electrical downtilt (°) Gain (dBi)
0 - 10, continuously adjustable, each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
15.5
15.8
15.3 ± 0.3
15.7 ± 0.4
> 16
> 17
65 ± 2.7
62 ± 3.7
10.5 ± 0.7
9.4 ± 0.6
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28 (790 - 862 // 880 - 960 MHz)
Interband isolation (dB) Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 18
> 18 500 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
Penta-band Hexa-band
Max. power per input (W)
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (yR)
Frequency range (MHz)
1710 - 1990
1920 - 2200
1710 - 2170 (bL)
2200 - 2490
Polarization
1710 - 1990
1920 - 2170
2490 - 2690 (yyL)
+45°, -45°
Electrical downtilt (°) Gain (dBi)
2490 - 2690
0 - 10, continuously adjustable, each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.3
17.8
18.0
18.2
17.2
17.7
17.7
17.2 ± 0.5
17.7 ± 0.4
17.9 ± 0.4
18.0 ± 0.5
17.1 ± 0.5
17.5 ± 0.4
17.5 ± 0.4
> 16
> 17
> 17
> 17
> 16
> 17
> 17
Horizontal 3dB beam width (°)
65 ± 5.0
62 ± 3.5
60 ± 3.5
60 ± 4.0
65 ± 3.8
62 ± 3.2
60 ± 3.6
Vertical 3dB beam width (°)
5.8 ± 0.4
5.4 ± 0.4
4.8 ± 0.2
4.3 ± 0.2
5.8 ± 0.4
5.4 ± 0.4
4.3 ± 0.2
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 18
> 18
> 18
> 18
Max. power per input (W)
250 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
209
DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-269065/65/65/65/65-15.5i/16i/18i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.0m Model: APE4518R0
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 415 x 240
Antenna weight (kg)
31.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
45.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 730 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
10 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
790 - 862 MHz
1710 - 2170 MHz
210
1710 - 2690 MHz
880 - 960 MHz
2490 - 2690 MHz
DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-269065/65/65/65/65-15.5i/16i/18i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.0m Model: APE4518R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Penta-band Hexa-band
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……..….r HWMxxx……..…rr HWMxxx……....yR
bL yyL
yR
HWMxxx……….bL HWMxxx………yyL
r yyRrr
r - Red b - Blue y - Yellow L - Left array R - Right array
211
DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-269065/65/65/65/65-16.5i/17i/18i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.6m Model: APE4518R1 Antenna Specifications Electrical Properties Frequency range (MHz)
790 - 862 (r)
880 - 960 (rr)
Polarization
+45°, -45°
Electrical downtilt (°)
0 - 10, continuously adjustable, each band separately at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
16.2
16.7
16.1 ± 0.5
16.5 ± 0.4
> 16
> 16
Horizontal 3dB beam width (°)
65 ± 1.9
62 ± 3.8
Vertical 3dB beam width (°)
8.6 ± 0.7
7.6 ± 0.6
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28 (790 - 862 // 880 - 960 MHz )
Interband isolation (dB) Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 24
> 24
> 18
> 18
Max. power per input (W)
500 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (yR)
Frequency range (MHz)
1710 - 1990
1920 - 2200
1710 - 2170 (bL)
2200 - 2490
Polarization
1710 - 1990
1920 - 2170
2490 - 2690 (yyL)
+45°, -45°
Electrical downtilt (°) Gain (dBi)
2490 - 2690
0 - 10, continuously adjustable , each band separately at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
17.3
17.8
18.0
18.2
17.2
17.7
17.7
17.2 ± 0.5
17.7 ± 0.4
17.9 ± 0.4
18.0 ± 0.5
17.1 ± 0.5
17.5 ± 0.4
17.5 ± 0.4
> 16
> 17
> 17
> 17
> 16
> 17
> 17
Horizontal 3dB beam width (°)
65 ± 5.0
62 ± 3.5
60 ± 3.5
60 ± 4.0
65 ± 3.8
62 ± 3.2
60 ± 3.6
Vertical 3dB beam width (°)
5.8 ± 0.4
5.4 ± 0.4
4.8 ± 0.2
4.3 ± 0.2
5.8 ± 0.4
5.4 ± 0.4
4.3 ± 0.2
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio , ± 30° (dB)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. power per input (W)
250 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
212
DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-269065/65/65/65/65-16.5i/17i/18i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.6m Model: APE4518R1 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2885 x 420 x 245
Antenna weight (kg)
35.6
Clamps weight (kg)
3.6 (2 units) 51.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2528
Antenna packing weight (kg)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1827
Frontal: 920 (at 150 km/h) Lateral: 305 (at 150 km/h) Rear side: 955 (at 150 km/h)
Wind load (N)
10 x 7/16 DIN Female Bottom
Penta-band Hexa-band
Connector position
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
790 - 862 MHz
1710 - 2690 MHz
880 - 960 MHz
1710 - 2170 MHz
2490 - 2690 MHz
213
DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-269065/65/65/65/65-16.5i/17i/18i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.6m Model: APE4518R1 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……..….r HWMxxx……..…rr HWMxxx……....yR
bL yyL
yR
HWMxxx……….bL HWMxxx………yyL r - Red b - Blue y - Yellow L - Left array R - Right array
214
r yyRrr
DXXXXX-690-862/880-960/1710-2690/1710-2690/1710-269065/65/65/65/65-16.5i/17i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.6m Model: APE4518R12 Preliminary Issue Electrical Properties 690 - 862
Frequency range (MHz)
690 - 803
880 - 960
790 - 862
3 x (1710 - 2690)
1710 - 1990
Polarization
2200 - 2490
2490 - 2690
+45°, -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts
Bottom Top
16.2
16.5
16.9
16.0 ± 0.5
16.3 ± 0.5
16.8 ± 0.6 17.3
17.4
17.6
18.1
17.2 ± 0.5
17.4 ± 0.5
17.5 ± 0.6
18.0 ± 0.6
at mid Tilt over all Tilts
16.9
17.2
17.4
17.5
16.8 ± 0.5
17.1 ± 0.3
17.2 ± 0.5
17.5 ± 0.5
> 20
> 20
> 19
> 19
at mid Tilt
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
> 20
> 18
> 17
Horizontal 3dB beam width (°)
66 ± 2.7
65 ± 2.9
63 ± 4.1
66 ± 4.7
63 ± 3.3
61 ± 5.2
60 ± 4.4
Vertical 3dB beam width (°)
8.6 ± 1.1
7.4 ± 0.9
6.5 ± 0.6
7.6 ± 0.6
6.8 ± 0.5
6.1 ± 0.5
5.6 ± 0.2
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 30 (690 - 862 // 1710 - 2690 MHz) ≥ 30 (880 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 27
> 26
> 30
> 30
> 27
> 27
> 18
> 22
> 22
> 19
> 19
> 21
> 20
400 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2769 x 359 x 178
Packing dimensions (H x W x D) (mm)
2980 x 425 x 255
Antenna weight (kg)
43.5
Clamps weight (kg)
5.8 (2 units)
Antenna packing weight (kg)
62 (included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 1335 (at 150 km/h) Lateral: 365 (at 150 km/h) Rear side: 1115 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
10 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
215
Penta-band Hexa-band
Gain (dBi)
1920 - 2200
DXXXXX-690-862/880-960/1710-2690/1710-2690/1710-269065/65/65/65/65-16.5i/17i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.6m Model: APE4518R12 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
216
DXXXXX-698-960/1710-2690/1710-2690/1710-2690/1710-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.6m Model: APE4517R0 Antenna Specifications Electrical Properties 698 - 960
Frequency range (MHz)
698 - 803
790 - 862
4 x (1710 - 2690)
824 - 894
880 - 960
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45°, -45°
Electrical downtilt (°)
0 - 10, continuously adjustable, each band separately at mid Tilt over all Tilts
16.2
16.5
16.7
17.0
16.1 ±0.5
16.3 ±0.4
16.5 ±0.4
16.8 ±0.4 17.1
17.3
17.1
17.6
16.9 ±0.5
17.1±0.3
17.0 ±0.4
17.4 ±0.5
at mid Tilt
Bottom
over all Tilts
16.8
17.1
16.8
17.3
16.7 ±0.5
17.0 ±0.4
16.7 ±0.4
17.1 ±0.5
> 17
> 17
> 17
> 16
at mid Tilt
Top
over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
67 ±1.9
66 ±3.5
65 ±2.4
62 ±3.3
63 ±3.4
62 ±2.8
61 ±3.7
60 ±3.1
Vertical 3dB beam width (°)
8.8 ±0.6
8.5 ±0.4
8.0 ±0.3
7.4 ±0.3
7.4 ±0.5
6.8 ±0.5
6.0 ±0.4
5.5 ±0.2
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28 ≥ 30 (698 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 25
> 24
> 24
> 25
> 25
> 20
> 20
> 20
> 20
> 17
>17
> 17
> 17
500 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2688 x 349 x 166
Packing dimensions (H x W x D) (mm)
2960 x 435 x 250
Antenna weight (kg)
38.0
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
49.0 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 990 (at 150 km/h) Lateral: 325 (at 150 km/h) Rear side: 1030 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
1834 2580 2688
Mast diameter supported (mm)
200
Survival wind speed (km/h)
250
Connector
10 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
217
Penta-band Hexa-band
Gain (dBi)
1710 - 1990
DXXXXX-698-960/1710-2690/1710-2690/1710-2690/1710-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.6m Model: APE4517R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 10 (motor activated) < 0.5 (stand by)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
Integrated RET S/N: HWMxxx……..….r
yLT
yyyRT
yyLB
yyyyRB
HWMxxx……..yLT
HWMxxx……yyLB HWMxxx..…yyyRT HWMxxx…yyyyRB r
r - Red y - Yellow L - Left array R - Right array T - Top array B - Bottom array Pattern sample for reference
698 - 960 MHz
218
1710 - 2690 MHz (Bottom)
1710 - 2690 MHz (Top)
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2200/24902690-65/65/65/65/65/65-14i/14.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with 6 Integrated RCUs - 1.4m Model: ASI4518R11 Antenna Specifications
Electrical Properties 690 - 862 (r1) 690 - 803
Polarization Electrical downtilt (°) Gain (dBi)
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
790 - 862
880 - 960 (r2)
1710 - 2690 (Cy2) 1710 - 1990
1920 - 2200
2200 - 2490
+45° , -45°
+45° , -45°
2 - 14 , continuously adjustable , each band separately
2 - 12 , continuously adjustable
13.8
13.7
14.0
17.0
17.2
17.7
18.2
13.7 ± 0.3
13.7 ± 0.5
13.9 ± 0.3
16.8 ± 0.5
17.0 ± 0.4
17.6 ± 0.5
17.8 ± 0.5
> 16
> 16
> 15
> 15
> 16
> 16
> 15
68 ± 3.0
65 ± 2.6
64 ± 3.2
63 ± 5.1
62 ± 5.0
63 ± 4.0
58 ± 3.0
12.3 ± 1.8
6.3 ± 0.4
5.8 ± 0.3
5.0 ± 0.2
4.7 ± 0.2
> 27
> 27
> 27
> 16
> 15
> 16
15.5 ± 2.1
13.6 ± 1.8
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB) Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
2490 - 2690
≥ 28
> 23
> 25
> 25
> 25
> 18
> 20
> 20
> 18
Max. power per input (W)
500 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
250 (at 50℃ ambient temperature) *
Penta-band Hexa-band
Frequency range (MHz)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties 1710 - 2690 (Ly1)
Frequency range (MHz)
1710 - 1990
1920 - 2200
1710 - 2200 (Rb1)
2200 - 2490
Polarization
2490 - 2690
1710 - 1990
1920 - 2200
2490 - 2690 (Ry3)
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable , each band separately 17.2
17.8
17.8
18.2
16.9
17.5
17.8
17.0 ± 0.5
17.7 ± 0.4
17.5 ± 0.3
18.1 ± 0.3
16.7 ± 0.5
17.4 ± 0.4
17.7 ± 0.3
> 16
> 17
> 17
> 16
> 15
> 16
> 16
Horizontal 3dB beam width (°)
68 ± 3.0
66 ± 3.0
63 ± 3.0
60 ± 2.0
68 ± 3.0
66 ± 3.0
60 ± 3.0
Vertical 3dB beam width (°)
6.6 ± 0.4
6.1 ± 0.4
5.4 ± 0.4
4.9 ± 0.4
6.4 ± 0.5
5.8 ± 0.5
4.8 ± 0.4
Gain (dBi)
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28 ≥ 28
Interband isolation (dB) Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
> 27
> 27
> 27
> 27
> 25
> 25
> 25
> 20
> 18
> 15
> 17
> 18
> 16
> 18
Max. power per input (W)
250 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) Grounding
50 DC Ground
* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
219
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2200/24902690-65/65/65/65/65/65-14i/14.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with 6 Integrated RCUs - 1.4m Model: ASI4518R11
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1520 x 369 x 149
Packing dimensions (H x W x D) (mm)
1790 x 435 x 240
Antenna weight (kg)
106
29.0
Clamps weight (kg)
3.6 (2 units) 39.2 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1414 1520
Antenna packing weight (kg)
Frontal: 730 (at 150 km/h) Lateral: 145 (at 150 km/h) Rear side: 725 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Downtilt kit ASMDT0D01
Description
Weight
Units per antenna
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 862 MHz
1710 - 2200 MHz
220
1710 - 2690 MHz
880 - 960 MHz
2490 - 2690 MHz
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2200/24902690-65/65/65/65/65/65-14i/14.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with 6 Integrated RCUs - 1.4m Model: ASI4518R11 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.
Penta-band Hexa-band
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…….Cy2 HWMxxx…….Ly1 HWMxxx………r1
Ly1
Cy2
Rb1 Ry3
HWMxxx…….Rb1 HWMxxx…....Ry3
r1
r2
HWMxxx………r2 r - Red L - Left array
y - Yellow R - Right array
b - Blue C - Center array
221
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2690/17102690-65/65/65/65/65/65-16.5i/17i/18i/18i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with 6 Integrated RCUs - 2.6m Model: ASI4518R4 Antenna Specifications Electrical Properties 690 - 862
Frequency range (MHz)
690 - 803
880 - 960
790 - 862
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45°, -45°
Electrical downtilt (°)
0 - 10, continuously adjustable , each band separately at mid Tilt over all Tilts
Gain (dBi)
4 x (1710 - 2690) 1710 - 1990
Bottom Top
16.2
16.5
16.9
16.0 ± 0.5
16.3 ± 0.5
16.8 ± 0.6
at mid Tilt over all Tilts at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
> 20
> 18
> 17
17.3
17.4
17.6
18.1
17.2 ± 0.5
17.4 ± 0.5
17.5 ± 0.6
18.0 ± 0.6
16.9
17.2
17.4
17.5
16.8 ± 0.5
17.1 ± 0.3
17.2 ± 0.5
17.5 ± 0.5
> 20
> 20
> 19
> 19
Horizontal 3dB beam width (°)
66 ± 2.7
65 ± 2.9
63 ± 4.1
66 ± 4.7
63 ± 3.3
61 ± 5.2
60 ± 4.4
Vertical 3dB beam width (°)
8.6 ± 1.1
7.4 ± 0.9
6.5 ± 0.6
7.6 ± 0.6
6.8 ± 0.5
6.1 ± 0.5
5.6 ± 0.2
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28
Interband isolation (dB) Front to back ratio, ± 30° (dB) Cross polar ratio (dB)
≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 30 (690 - 862 // 1710 - 2690 MHz) ≥ 30 (880 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz) 0°
Max. power per input (W)
> 25
> 27
> 26
> 30
> 30
> 27
> 27
> 18
> 22
> 22
> 19
> 19
> 21
> 20
400 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 106
2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2769 x 359 x 178
Packing dimensions (H x W x D) (mm)
2980 x 425 x 255
Antenna weight (kg)
46.0
Clamps weight (kg)
5.8 (2 units) 64.5 (included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey -40 .. +65 Frontal: 1335 (at 150 km/h) Lateral: 365 (at 150 km/h) Rear side: 1115 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
222
1862
Operational temperature (℃)
2769
Antenna packing weight (kg)
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2690/17102690-65/65/65/65/65/65-16.5i/17i/18i/18i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with 6 Integrated RCUs - 2.6m Model: ASI4518R4 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.
Penta-band Hexa-band
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx…..yyLB HWMxxx…….yLT
yLT
yyyRT
yyLB
yyyyRB
HWMxxx……….r HWMxxx…yyyRT HWMxxx..yyyyRB
r
HWMxxx………rr r - Red L - Left array T - Top array
y - Yellow R - Right array B -Bottom array
223
rr
DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2690/17102690-65/65/65/65/65/65-16.5i/17i/18i/18i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with 6 Integrated RCUs - 2.6m Model: ASI4518R4 Pattern sample for reference
224
690 - 862 MHz
880 - 960 MHz
1710 - 2690 MHz (Top)
1710 - 2690 MHz (Bottom)
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/16952690-65/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with Integrated RCUs - 2.6m Model: ASI4518R10 Antenna Specifications Electrical Properties 2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690)
824 - 894
880 - 960
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts
15.8
16.5
16.7
17.0
15.5 ± 0.5
16.3 ± 0.5
16.5 ± 0.5
16.7 ± 0.5
2 - 12 , continuously adjustable , each band separately
at mid Tilt
Bottom
over all Tilts
16.6
17.0
17.2
17.6
16.4 ± 0.6
16.8 ± 0.5
17.0 ± 0.5
17.4 ± 0.5
16.6
17.0
17.2
17.6
16.4 ± 0.6
16.8 ± 0.5
17.0 ± 0.5
17.4 ± 0.5
> 16
> 16
> 16
> 16
at mid Tilt
Top
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
> 16
> 17
> 17
> 17
68 ± 5
65 ± 5
62 ± 5
60 ± 5
65 ± 5
63 ± 5
61 ± 5
60 ± 5
8.8 ± 0.7
8.0 ± 0.6
7.8 ± 0.5
7.5 ± 0.5
7.0 ± 0.7
6.0 ± 0.5
5.5 ± 0.4
5.0 ± 0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ± 30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 23
> 26
> 26
> 26
> 26
> 27
> 27
> 28
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
500 (at 50℃ ambient temperature)
Total power (W)
Penta-band Hexa-band
Gain (dBi)
1695 - 1990
250 (at 50℃ ambient temperature)
1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
106
2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2769 x 429 x 196
Packing dimensions (H x W x D) (mm)
2980 x 530 x 275
Antenna weight (kg)
46.5
Clamps weight (kg)
5.8 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 1320 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 1320 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
1787
67.0 (Included clamps)
200
Survival wind speed (km/h)
250
Connector
12 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
225
2769
Antenna packing weight (kg)
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/16952690-65/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET Hexa-Band Antenna with Integrated RCUs - 2.6m Model: ASI4518R10 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC < 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Power consumption (W) Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Integrated RET S/N: HWMxxx……LTy2 HWMxxx……LBy1
LTy2
RTy4
LBy1
RBy3
Lr1
Rr2
HWMxxx……...Lr1 HWMxxx...…RBy3 HWMxxx...…RTy4 HWMxxx…..…Rr2 r - Red L - Left array T - Top array
y - Yellow R - Right array B - Bottom array
Pattern sample for reference
690 - 960 MHz
226
1695 - 2690 MHz
Frequency 3dB Horizontal Range (MHz) beam width (°)
Gain (dBi)
Electrical Tilt Method downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
690-960/ 690-960
33(-30)/33(+30)
18.5/18.5
0-10/0-10
EasyRET2.0
4 x 7/16 DIN-F 2090 x 590 x 169
AMB4519R0
228
/
1710-2690/ 1710-2690
33(-30)/33(+30)
20.5/20.5
0-10/0-10
MET2.0
4 x 7/16 DIN-F 1468 x 349 x 166
AMB452000
230
/
1710-2690/ 1710-2690
33(-30)/33(+30)
20.5/20.5
0-10/0-10
EasyRET2.0
4 x 7/16 DIN-F 1468 x 349 x 166
AMB4520R0
232
/
790-960/ 1710-2200/ 1710-2200
65/33 (-30)/33(+30)
16/20.5/20.5
0-10/0-10/ 0-10
EasyRET2.0
6 x 7/16 DIN-F 2022 x 359 x 178
AMB4520R1
234
/
690-960/ 1710-2200/ 1710-2200
65/33 (-30)/33(+30)
17/19.5/19.5
0-10/0-10/ 0-10
EasyRET2.0
6 x 7/16 DIN-F 2750 x 359 x 178
**AMB4520R3
236
/
690-960/ 1695-2690/ 1695-2690/ 1695-2200/ 1695-2200
0-10/0-10/ 65/65/65/33 17/17.5/17.5/ 0-10/0-10/ (-30)/33(+30) 18.5/18.5 0-10
EasyRET2.0 10 x 7/16 DIN-F 2750 x 359 x 178
**AMB4519R2
237
/
** Preliminary Issue
Multi-beam
B - 7. Multi-beam Antenna
2MX-690-960-33-18.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 2.0m Model: AMB4519R0 Antenna Specifications Electrical Properties 690 - 960
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°) Gain (dBi)
0 - 10, continuously adjustable at mid Tilt
16.6
18.0
18.2
18.3
over all Tilts
16.5 ±0.5
17.8 ±0.4
18.0 ±0.3
18.2 ±0.3
> 16
> 17
> 18
> 18
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
39 ±3
37 ±3
36 ±2
34 ±2
10.0 ±0.5
9.2 ±0.3
8.9 ±0.3
8.3 ±0.3
± 30
± 28
± 27
± 25
VSWR
< 1.5
Horizontal beam centers (°) Cross polar isolation (dB)
Same beam: ≥ 22
Same beam: ≥26
Front to back ratio, ±30° (dB)
> 25
> 26
> 26
> 26
Cross polar ratio (dB)
> 17
> 22
> 23
> 23
0°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 144
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2090 x 590 x 169
Packing dimensions (H x W x D) (mm)
2350 x 705 x 275
Antenna weight (kg)
39.8
Clamps weight (kg)
5.8 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 1320 (at 150 km/h) Lateral: 195 (at 150 km/h) Rear side: 1385 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
228
2090
52.8 (Included clamps)
1267
Antenna packing weight (kg)
2MX-690-960-33-18.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 2.0m Model: AMB4519R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Multi-beam
Integrated RET S/N: HWMxxx…….r HWMxxx……rr r - Red
Pattern sample for reference
690 - 960 MHz (rr-30)
690 - 960 MHz (r+30)
229
2MX-1710-2690-33-20.5i-M Model: AMB452000
Antenna Specifications Electrical Properties 1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable at mid Tilt
19.2
19.7
20.0
20.2
over all Tilts
19.0 ±0.6
19.5 ±0.6
19.8 ±0.5
20.0 ±0.8
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
34 ±2.1
31 ±2.3
29 ±0.5
27 ±1.0
Vertical 3dB beam width (°)
6.4 ±0.5
5.9 ±0.4
5.1 ±0.2
4.7 ±0.3
± 25
± 23
Gain (dBi)
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Horizontal beam centers (°)
± 30
± 27
Cross polar isolation (dB)
Same beam: ≥ 28
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 32
> 32
> 32
> 32
> 20
> 20
> 22
> 22
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1468 x 349 x 166
Packing dimensions (H x W x D) (mm)
1870 x 415 x 240
Antenna weight (kg)
18.3
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
29.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65 Frontal: 500 (at 150 km/h) Lateral: 165 (at 150 km/h) Rear side: 530 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
230
2MX-1710-2690-33-20.5i-M Model: AMB452000
This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model
Description
Weight
Units per antenna
AIMM20D11
Remote electrical tilt module, a couple of AISG connectors
0.6 kg
1 (Separate packing)
Multi-beam
1468
1286
106
Pattern sample for reference
1710 - 2690 MHz (yy-30)
1710 - 2690 MHz (y+30)
231
2MX-1710-2690-33-20.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.4m Model: AMB4520R0 Antenna Specifications Electrical Properties 1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°) Gain (dBi)
0 - 10, continuously adjustable at mid Tilt
19.2
19.7
20.0
20.2
over all Tilts
19.0 ±0.6
19.5 ±0.6
19.8 ±0.5
20.0 ±0.8
> 17
> 17
> 17
> 17
Side lobe suppression for first side lobe above main beam (dB)
Horizontal 3dB beam width (°)
34 ±2.1
31 ±2.3
29 ±0.5
27 ±1.0
Vertical 3dB beam width (°)
6.4 ±0.5
5.9 ±0.4
5.1 ±0.2
4.7 ±0.3
± 25
± 23
> 32
> 32
> 32
> 20
> 22
> 22
VSWR
< 1.5
Horizontal beam centers (°)
± 30
± 27
Cross polar isolation (dB)
Same beam: ≥ 28
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
> 32 0°
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1468 x 349 x 166
Packing dimensions (H x W x D) (mm)
1870 x 415 x 240
Antenna weight (kg)
18.5
Clamps weight (kg)
3.0 (2 units)
Antenna packing weight (kg)
29.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
232
1286
Frontal: 500 (at 150 km/h) Lateral: 165 (at 150 km/h) Rear side: 530 (at 150 km/h)
1468
-40 .. +65
Operational temperature (℃)
2MX-1710-2690-33-20.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.4m Model: AMB4520R0 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Multi-beam
Integrated RCU S/N: HWMxxx…...y HWMxxx….yy y - Yellow
Pattern sample for reference
1710 - 2690 MHz (yy-30)
1710 - 2690 MHz (y+30)
233
2MXX-790-960/1710-2200-65/33-16i/19.5i-M/M-R EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m Model: AMB4520R1 Antenna Specifications Electrical Properties 790 - 960
Frequency range (MHz)
790 - 862
1710 - 2200
824 - 894
880 - 960
Polarization
1710 - 1990
1920 - 2200
+45° , -45°
Electrical downtilt (°) Gain (dBi)
0 - 10, continuously adjustable
0 - 10 , continuously adjustable
at mid Tilt
15.3
15.7
16.0
18.7
19.1
over all Tilts
15.0 ±0.5
15.3 ±0.5
15.8 ±0.4
18.4 ±0.5
18.8 ±0.5
> 17
> 17
> 18
> 18
> 18
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
65 ±4
62 ±2.5
60 ±2.5
32 ±1
30 ±1
9.8 ±0.5
9.3 ±0.5
8.5 ±0.5
6.5 ±0.3
6.0 ±0.3
± 28
± 27
VSWR
< 1.5
Horizontal beam centers (°)
/ ≥ 25
Cross polar isolation (dB) Interband isolation (dB)
≥ 30 (790 - 960 // 1710 - 2200 MHz)
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
Same beam: ≥ 25
0°
> 25
> 25
> 25
> 28
> 28
> 17
> 17
> 17
> 18
> 15
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
300 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2022 x 359 x 178
Packing dimensions (H x W x D) (mm)
2400 x 430 x 255
Antenna weight (kg)
26.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
40.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
234
2022
Frontal: 930 (at 150 km/h) Lateral: 255 (at 150 km/h) Rear side: 755 (at 150 km/h)
1355
-40 .. +65
Operational temperature (℃)
2MXX-790-960/1710-2200-65/33-16i/19.5i-M/M-R EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m Model: AMB4520R1 Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC < 5 (motor activated, 12V) < 0.5 (stand by, 12V)
Power consumption (W)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM
Multi-beam
Integrated RET S/N: HWMxxx……r HWMxxx……b HWMxxx…..bb r - Red
b - Blue
Pattern sample for reference
790 - 960 MHz
1710 - 2200 MHz (bb-30)
1710 - 2200 MHz (b+30)
235
2MXX-690-960/1710-2200-65/33-17i/19.5i-M/M-R EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.6m Model: AMB4520R3 Preliminary Issue Electrical Properties Frequency range (MHz)
690 - 960
1710 - 2200
Electrical downtilt (°)
0 - 10
0 - 10
Gain (dBi)
16.8
19.3
65
33
Horizontal beam centers (°)
/
± 30
Vertical 3dB beam width (°)
8.0
6.0
Horizontal 3dB beam width (°)
VSWR Front to back ratio, copolar (dB) Intermodulation IM3 (dBc)
< 1.5 Typ. 25
Typ. 27 ≤ -153 (2 x 43 dBm carrier)
Mechanical Properties Antenna dimensions (H x W x D) (mm)
2750 x 359 x 178
Packing dimensions (H x W x D) (mm)
2995 x 465 x 275
Antenna net weight (kg)
38.0
Mechanical downtilt (°)
0-8
Connector RET type RET protocols
236
6 x 7/16 DIN Female Integrated RET AISG 2.0 / 3GPP
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m Model: AMB4519R2 Preliminary Issue Electrical Properties Frequency range (MHz)
690 - 960
2 x(1695 - 2690)
1695 - 2200
Electrical downtilt (°)
0 - 10
0 - 10
0 - 10
Gain (dBi)
16.8
17.3
18.3
65
65
33
Horizontal 3dB beam width (°) Horizontal beam centers (°) Vertical 3dB beam width (°)
/
± 30
8
6
VSWR Front to back ratio, copolar (dB) Intermodulation IM3 (dBc)
7
< 1.5 Typ. 25
Typ. 25
Typ. 27
≤ -153 (2 x 43 dBm carrier)
Antenna dimensions (H x W x D) (mm)
2750 x 359 x 178
Packing dimensions (H x W x D) (mm)
2995 x 465 x 275
Antenna net weight (kg)
42.0
Mechanical downtilt (°)
0-8
Connector RET type RET protocols
Multi-beam
Mechanical Properties
10 x 7/16 DIN Female Integrated RET AISG 2.0 / 3GPP
237
B - 8. TDD Antenna
Frequency Range (MHz)
3dB Horizontal beam width (°)
Gain (dBi)
Electrical Tilt Method downtilt (°)
Connector
Dimension (mm)
Model
Page
Array Symbol
2300-2690
90
16
2-12
EasyRET2.0
9 x N Female
1445 x 299 x 109
ATD4516R5
240
/
3400-3800
90
15.5
2-12
EasyRET2.0
9 x N Female
990 x 269 x 86
**ATD4516R7
244
/
3300-3800
65
17
2-12
EasyRET2.0
9 x N Female
990 x 323 x 89
**ATD4517R0
247
/
Connector
Dimension (mm)
Model
Page
Array Symbol
3 x 2 x 7/16 DIN-F
1793 x Φ 230 & Φ 250
A264518S0
249
/
B - 9. Cluster Antenna
Frequency 3dB Horizontal Range (MHz) beam width (°)
1710-2690
65
Gain (dBi)
18
Electrical Tilt Method downtilt (°)
2-12
MET1.0
TDD Cluster
Cluster Antenna
DX-2300-2690-90-16i-M-R Model: ATD4516R5
Antenna Specifications Electrical Properties Frequency range (MHz)
2300 - 2400
Polarization General parameters
+45° , -45° 2 - 12 , continuously adjustable
Electrical downtilt (°)
±1
Electrical downtilt tolerance (°)
DC Ground
Grounding Coupling factor between calibration port and each antenna port (dB)
-26 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
0.7
Max. phase tolerance from calibration port to input Calibration and electrical ports (°) parameters Ports VSWR
5 1.5
Co-polarization isolation between ports (dB)
≥ 20 @ 2°Electrical downtilt ; ≥ 25 @ 3°- 6°Electrical downtilt; ≥ 28 @ 7°- 12°Electrical downtilt
Cross-polarization isolation between ports (dB)
≥ 25 @ 2°Electrical downtilt; ≥ 28 @ 3°- 6°Electrical downtilt; ≥ 30 @ 7°- 12°Electrical downtilt
Single column beam
Horizontal 3dB beam width (°)
90
75
Gain (dBi)
16
17
Cross polar ratio (0°) (dB)
20
20
Side lobe suppression for first side lobe above main beam (dB)
≥ 18
≥ 18
Front to back ratio (dB)
≥ 28
≥ 27
30
27
20.5
21.5
Vertical 3dB beam width (°)
6.5
5.7
Front to back ratio (dB)
≥ 30
≥ 30
Side lobe suppression for first side lobe above main beam (dB)
≥ 18
≥ 18
65
65
17.5
18
Horizontal 3dB beam width (°) Gain (dBi) Multi-beam
Horizontal 3dB beam width (°) Gain (dBi) Radiation parameters 65° Broadcast beam
Gain roll-off at sector edge (dB)
12
12
Vertical 3dB beam width (°)
6.5
5.7
Cross polar ratio (0°) (dB)
22
22
Front to back ratio (dB)
≥ 30
≥ 30
Side lobe suppression for first side lobe above main beam (dB)
≤ -18
≤ -18
21
22
0° direction beam horizontal 3dB beam width (°)
25.5
23
0° direction beam horizontal side lobe suppression (dB)
-12
-12
±30° direction beam gain (dBi)
20.5
21
0° direction beam cross polar ratio (0°) (dB)
22
22
0° direction beam front to back ratio (dB)
30
30
0° direct beam gain (dBi)
Service beam
240
2496 - 2690
DX-2300-2690-90-16i-M-R Model: ATD4516R5
106
Mechanical Properties 62
Distance between columns (mm) Antenna dimensions (H x W x D) (mm)
1445 x 299 x 109
Packing dimensions (H x W x D) (mm)
1770 x 350 x 180
Antenna weight (kg)
16.0
Clamps weight (kg)
2.9 (2 units)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1445
Mast diameter supported (mm)
1331
22.8 (Included clamps)
Antenna packing weight (kg)
Frontal: 520 (at 150 km/h) Lateral: 105 (at 150 km/h) Rear side: 600 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250 9 x N Female
Connector
Bottom
Connector position
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
TDD Cluster
Accessories
RET S/N: HWMxxx….b RAE S/N: HWXxxx…..b b - Blue
241
DX-2300-2690-90-16i-M-R Model: ATD4516R5
Pattern sample for reference
Single column
242
65° Broadcast
Service 0°
Service 30°
Azimuth -15°
Azimuth +15°
Multi-Beam -30°
Multi-Beam +30°
DX-2300-2690-90-16i-M-R Model: ATD4516R5
Antenna Information Management Module (AIMM) Specifications RET Properties RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s) RET interface 1 (RF feeder)
Typ. < 55 Calibration channel integrate the Bias-T and supporting OOK modulation signal communication 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector) Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
10 (8/20 μs)
RAE Properties RAE type
Integrated RAE, manages antenna information
RAE protocols
AISG-ES-RAE V2.1.0
EasyBeam Properties Frequency range (MHz)
2300 - 2400
2496 - 2690
Electrical downtilt (°) Horizontal 3dB beam width (°) Broadcast beam
Electrical azimuth (°) Electrical azimuth step(°)
2 - 12 30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
TDD Cluster
Standards: EN 55022(Emission), EN 55024(Immunity), ETSI EN 301 489, FCC part15, ICES-003 Certification: CE, FCC, IC
243
DX-3400-3800-90-15.5i-M-R Model: ATD4516R7
Preliminary Issue Electrical Properties
General parameters
Frequency range (MHz)
3400 - 3800
Polarization
+45° , -45°
Electrical downtilt (°) Electrical downtilt tolerance (°)
Grounding
Calibration and electrical parameters
Coupling factor between calibration port and each antenna port (dB)
-26
Max. amplitude tolerance from calibration port to input ports (dB)
0.9
Max. phase tolerance from calibration port to input ports (°)
7
Ports VSWR
1.5
Avg. power capacity (W)
25
Co-polarization isolation between ports (dB)
20
Cross-polarization isolation between ports (dB)
25
Single column beam
65° Broadcast beam
244
±1
DC Ground
Horizontal 3dB beam width (°)
Radiation parameters
2 – 12, continuously adjustable
Gain (dBi)
90 15.5
Cross polar ratio (0°) (dB)
18
Cross polar ratio (±60°) (dB)
10
Front to back ratio (dB)
23
Horizontal 3dB beam width (°)
65
Gain (dBi)
17
Gain roll-off at sector edge (dB)
12
Vertical 3dB beam width (°)
5.5
Cross polar ratio (0°) (dB)
22
Front to back ratio (dB)
25
Vertical side lobe suppression above main beam (dB)
-15
0° direct beam gain (dBi)
21.5
0° direction beam horizontal 3dB beam width (°)
29
0° direction beam horizontal side lobe suppression (dB)
-12
±60° direction beam gain (dBi)
18.5
Service beam ±60° direction beam horizontal 3dB beam width (°)
32
±60° direction beam horizontal side lobe suppression (dB)
-5
0° direction beam cross polar ratio (0°) (dB)
22
0° direction beam front to back ratio (dB)
28
DX-3400-3800-90-15.5i-M-R Model: ATD4516R7
Mechanical Properties Distance between columns (mm)
43
Antenna dimensions (H x W x D) (mm)
990 x 269 x 86
Packing dimensions (H x W x D) (mm)
1150 x 340 x 155
Antenna weight (kg)
13
Clamps weight (kg)
2.9 (2 units)
Antenna packing weight (kg)
19.4 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65 Frontal: 385 (at 150 km/h) Lateral: 55 (at 150 km/h) Rear side: 370 (at 150 km/h)
Wind load (N) Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
9 x N Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16°
1.4 kg
1 (Separate packing)
TDD Cluster
Accessories
245
DX-3400-3800-90-15.5i-M-R Model: ATD4516R7
Antenna Information Management Module (AIMM) Specifications RET Properties RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s) RET interface 1 (RF feeder)
Typ. < 55 Calibration channel integrate the Bias-T and supporting OOK modulation signal communication 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector) Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
RAE Properties RAE type RAE protocols
Integrated RAE, manages antenna information AISG-ES-RAE V2.1.0
Standards: EN 60950-1 (Safety), UL 60950-22(Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
246
DX-3300-3800-65-17i-M-R Model: ATD4517R0
Preliminary Issue Electrical Properties Frequency range (MHz)
3300 - 3800
Polarization General parameters
+45° , -45°
Electrical downtilt (°)
2 – 12, continuously adjustable
Electrical downtilt tolerance (°)
±1
Grounding
Calibration and electrical parameters
Radiation parameters
DC Ground
Coupling factor between calibration port and each antenna port (dB)
-26
Max. amplitude tolerance from calibration port to input ports (dB)
0.9
Max. phase tolerance from calibration port to input ports (°)
7
Ports VSWR
1.5
Avg. power capacity (W)
25
Co-polarization isolation between ports (dB)
20
Cross-polarization isolation between ports (dB)
25
Horizontal 3dB beam width (°)
65
Gain (dBi)
17
Vertical 3dB beam width (°)
5.5
Cross polar ratio (0°) (dB)
15
Front to back ratio (dB)
25
Vertical side lobe suppression above main beam (dB)
-16
Antenna dimensions (H x W x D) (mm)
990 x 323 x 89
Packing dimensions (H x W x D) (mm)
1310 x 390 x 155
Antenna net weight (kg)
15
Bracket weight (kg)
4.2
Packing weight (kg)
22.5
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 420 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 470 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector Connector position
TDD Cluster
Mechanical Properties
9 x N Female Bottom
247
DX-3300-3800-65-17i-M-R Model: ATD4517R0
Antenna Information Management Module (AIMM) Specifications RET Properties RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
RET interface 1 (RF feeder)
Typ. < 55
Calibration channel integrate the Bias-T and supporting OOK modulation signal communication 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector) Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
RAE Properties RAE type RAE protocols
Integrated RAE, manages antenna information AISG-ES-RAE V2.1.0
Standards: EN 60950-1 (Safety), UL 60950-22(Safety – Equipment installed outdoor), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15 Certification: CE, FCC, RoHS, WEEE
248
CX-1710-2690-65-18i-M Model: A264518S0
Antenna Specifications Electrical Properties per Sector 1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45°, -45°
Electrical downtilt (°)
2 - 12, continuously adjustable 17.3
17.8
18.3
18.5
17.1 ±0.4
17.7 ±0.5
18.2 ±0.5
18.3 ±0.4
> 17
> 16
> 18
> 18
Horizontal 3dB beam width (°)
69 ±3.5
65 ±4.8
62 ±5.0
60 ±5.0
Vertical 3dB beam width (°)
6.7 ±0.4
6.1 ±0.5
5.5 ±0.3
4.9 ±0.2
Gain (dBi)
at mid Tilt over all Tilts
Side lobe suppression for first side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
> 27
> 28
> 28
> 27
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.
Mechanical Properties
Packing weight (kg)
22.5 29.8
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position Relative directions of internal antennas (sector axis) Mechanical interface
TDD Cluster
2000 x 390 x 385
310 (at 150 km/h) 150
Φ 230
1443
Antenna net weight (kg)
1793 x Φ 230 and Φ 250
200 3 x 2 x 7/16 DIN Female Bottom - inside service area 0°, 120°, 240° Flange connection 3 x M10 bolt at a graduated diameter of 257 mm
Accessories (only Huawei product applies, order separately if required) SBT
ASBT00001
RCU
ARCU01109 (AISG 1.1) ARCU02004 (AISG 2.0)
350
Packing dimensions (H x W x D) (mm)
1793
Antenna dimensions (H x D) (mm)
service area (cover attached)
Φ 250
249
CX-1710-2690-65-18i-M Model: A264518S0
57 55
59
+45°
-45°
7/16 (F)
-45°
+45°
1710 - 2690 1710 - 2690 +45°
-45°
Unit: mm Flange interface (thickness: 5 mm):
Pattern sample for reference
1710 - 2200 MHz
250
2200 - 2690 MHz
7/16 (F)
1710 - 2690
C. Antenna Information Management C - 1. RET System C - 1 - 1. Remote Control Unit (RCU) Antenna and RCU configuration list
253
Antenna and AIMM configuration list
254
Input voltage range (V)
AISG type
Adjustment time (full range) (min)
Calibration time (min)
Dimension (mm)
Model
Page
DC 10 - 30
AISG 2.0
1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification 160 x 205 x 54.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
205 x 380 x 130
DTMA weight (kg)
≤ 3.3 (with brackets)
Packing weight (kg)
≤ 4.0
DTMA Volume (L)
Approx. 1.8
8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting
AISG connector Mounting Mast diameter (mm)
Default: 30 - 125 // Optional: 40 - 140
Connector *Insertion loss:
TMA
DTMA dimensions (W x H x D) (mm)
4 x 7/16 DIN Female (Long neck) IL
IL791MHz 2 IL806MHz IL821MHz 4
**Noise figure:
NF
NF832MHz 2 NF847MHz NF862MHz 4
***TMA gain can be switched from fixed to adjustable via the gain setting command. when set a value between 0x20 and 0x30, the gain is adjustable, and the range is from 8 dB to 12 dB, and when the value is 0xFE, the gain is fixed 12 dB.
297
DTMA-2100-12dB-2NodeBport2ANTport-AISG/CWA Model: ATA212001
Unit : mm
298
DTMA-2600-12dB-2eNodeBport2ANTport-AISG/CWA Model: ATA262000
Product Description The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and data communication quality.
Features
High linearity and low noise performance.
Power failure bypass for high reliability.
Light weight and compact design.
Wall mounting and mast mounting.
Built-in lightning protection up to 10 kA.
Support AISG 2.0 protocol.
Support default 12dB fixed gain.
Can be switched to adjustable gain via software command, and the range is from 8 to 12 dB.
Appearance and Block Diagram ANT 0
ANT 1
Lightning protection
Lightning protection
Control Circuit & Modem
LNA
TMA
LNA
RS485
DC & OOK Bias Tee & Lightning protection
eNodeB 0
DC & OOK
RET
Bias Tee & Lightning protection
eNodeB 1
299
DTMA-2600-12dB-2eNodeBport2ANTport-AISG/CWA Model: ATA262000
Tx Specifications Frequency range (MHz)
2620 - 2690
Bandwidth (MHz)
70
Insertion loss* (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW < 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications Frequency range (MHz)
2500 - 2570
Bandwidth (MHz)
70 ≥ 18 (DC ON) ≥ 13 (DC OFF)
Return loss(dB) Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF) 12 ±1 (Fixed ) 8 - 12 (Adjustable)
Gain*** (dB) Noise figure** (dB)
Avg. < 1.3 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications CWA Mode (Single port) DC supply voltage (V)
Operating current per TMA (mA) (without RET)
AISG Mode (Total ports)
8.5 - 15
9 - 30
@12 V
99 ±5
187 ±5
@17 V
74 ±5
134 ±5
@30 V
/
90 ±5
150 - 210
AISG
Alarm management (mA) Power consumption (W)
< 3.5
Environmental Specification Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg)
205 x 380 x 130 ≤ 3.1 (with brackets)
Packing weight (kg)
≤ 4.0
DTMA Volume (L)
Approx. 1.8
8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting
AISG connector Mounting Mast diameter (mm)
Default: 30 - 125 // Optional: 40 - 140
Connector *Insertion loss:
160 x 210 x 54.5 (without connectors, without brackets)
4 x 7/16 DIN Female (Long neck) IL
IL791MHz 2 IL806MHz IL821MHz 4
**Noise figure:
NF
NF832MHz 2 NF847MHz NF862MHz 4
***TMA gain can be switched from fixed to adjustable via the gain setting command. when set a value between 0x20 and 0x30, the gain is adjustable, and the range is from 8 dB to 12 dB, and when the value is 0xFE, the gain is fixed 12 dB.
300
DTMA-2600-12dB-2eNodeBport2ANTport-AISG/CWA Model: ATA262000
TMA
Unit : mm
301
MTMA-1800/2100-12dB-2BTSport2ANTport-AISG Model: ATADU2002
Product Description The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-siting purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the MTMA can be operated from one
primary controller, either on BTS0 or BTS1 port. When scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency band).
Features
High linearity and low noise performance.
Balanced LNA design and power failure bypass for high reliability.
Light weight and compact design.
Designed for co-siting purposes.
Wall mounting and mast mounting.
Built-in lightning protection up to 10 kA.
Support AISG 2.0 protocol.
Appearance and Block Diagram
302
MTMA-1800/2100-12dB-2BTSport2ANTport-AISG Model: ATADU2002
Tx Specifications Frequency range (MHz)
1805 - 1880
2110 - 2170
Bandwidth (MHz)
75
60
Insertion loss (dB)
Typ. < 0.45
Typ. < 0.35
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW < 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (3rd order; with 2 x 43 dBm)
≤ -122 (7th order; with 2 x 43 dBm)
Rx Specifications Frequency range (MHz) Bandwidth (MHz)
1710 - 1785
1920 - 1980
75
60 ≥ 18 (DC ON) ≥ 14 (DC OFF)
Return loss (dB) Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.2
Typ. < 1.2
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications DC supply voltage (V) Operating current per TMA (mA) (without RET)
9 - 30 @12 V
245 ±5
@17 V
175 ±5
@30 V
105 ±5
Alarm management
AISG
Power consumption (W)
< 3.0
Environmental Specification Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
MTMA dimensions (W x H x D) (mm)
196 x 280 x 110 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
245 x 475 x 220
MTMA weight (kg)
≤ 7.0 (with brackets)
Packing weight (kg)
≤ 8.2
MTMA Volume (L) AISG connector Mounting Mast diameter (mm)
Connector
TMA
Mechanical Specification
Approx. 5.9 8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140
4 x 7/16 DIN Female ( Two ports are BTS and two ports are ANT)
303
MTMA-1800/2100-12dB-2BTSport2ANTport-AISG Model: ATADU2002
Unit : mm
304
MTMA-1800/2100-12dB-2BTSport4ANTport-AISG Model: ATADU2003
Product Description The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to
satisfy the co-siting purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency band).
Features
High linearity and low noise performance.
Balanced LNA design and power failure bypass for high reliability.
Light weight and compact design.
Designed for co-siting purposes.
Wall mounting and mast mounting.
Built-in lightning protection up to 10 kA.
Support AISG 2.0 protocol.
RET0 only controlled by BTS0 and RET1 only controlled by BTS1.
TMA
Appearance and Block Diagram
305
MTMA-1800/2100-12dB-2BTSport4ANTport-AISG Model: ATADU2003
Tx Specifications Frequency range (MHz)
1805 - 1880
2110 - 2170
Bandwidth (MHz)
75
60
Insertion loss (dB)
Typ. < 0.45
Typ. < 0.35
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW < 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (3rd order; with 2 x 43 dBm)
≤ -122 (7th order; with 2 x 43 dBm)
Rx Specifications Frequency range (MHz)
1710 - 1785
Bandwidth (MHz)
1920 - 1980
75
60 ≥ 18 (DC ON) ≥ 14 (DC OFF)
Return loss (dB) Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.2
Typ. < 1.2
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications DC supply voltage (V)
Operating current per TMA (mA) (without RET)
9 - 30 @12 V
225 ±5
@17 V
165 ±5
@30 V
105 ±5
Alarm management
AISG
Power consumption (W)
< 3.0
Environmental Specification Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification MTMA dimensions (W x H x D) (mm)
196 x 280 x 110 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
245 x 475 x 220
MTMA weight (kg) Packing weight (kg) MTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector
306
≤ 7.3 (with brackets) ≤ 8.5 Approx. 5.9 8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 6 x 7/16 DIN Female ( Two ports are BTS and four ports are ANT)
MTMA-1800/2100-12dB-2BTSport4ANTport-AISG
Unit : mm
307
TMA
Model: ATADU2003
MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG Model: ATADU2001
Product Description The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-siting purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the MTMA can be operated from one primary controller, either on NodeB0 or NodeB1 port. When scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency band).
Features
High linearity and low noise performance.
Balanced LNA design and power failure bypass for high reliability.
Light weight and compact design.
Designed for co-siting purposes.
Wall mounting and mast mounting.
Built-in lightning protection up to 10 kA.
Support AISG 2.0 protocol.
Appearance and Block Diagram
308
MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG Model: ATADU2001
Tx Specifications Frequency range (MHz) Bandwidth (MHz)
791 - 821
925 - 960
30
35
Insertion loss (dB)
Typ. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW < 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (3rd order; with 2 x 43 dBm)
Rx Specifications Frequency range (MHz)
832 - 862
Bandwidth (MHz)
880 - 915
30
35 ≥ 18 (DC ON) ≥ 14 (DC OFF)
Return loss(dB) Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.3
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications DC supply voltage (V) Operating current per TMA (mA) (without RET)
9 - 30 @12 V
245 ±5
@17 V
175 ±5
@30 V
105 ±5
Alarm management
AISG
Power consumption (W)
< 3.0
Environmental Specification Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
MTMA dimensions (W x H x D) (mm)
247 x 342 x 132 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
300 x 545 x 250
MTMA weight (kg)
≤ 10.5 (with brackets)
Packing weight (kg)
≤ 12.3
MTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector
TMA
Mechanical Specification
Approx. 10.8 8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female ( Two ports are eNodeB and two ports are ANT)
309
MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG Model: ATADU2001
Unit : mm
310
MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG Model: ATADU2005
Product Description The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-siting purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per
frequency band).
Features
High linearity and low noise performance.
Balanced LNA design and power failure bypass for high reliability.
Light weight and compact design.
Designed for co-siting purposes.
Wall mounting and mast mounting.
Built-in lightning protection up to 10 kA.
Support AISG 2.0 protocol.
RET0 only controlled by eNodeB0 and RET1 only controlled by eNodeB1.
TMA
Appearance and Block Diagram
311
MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG Model: ATADU2005
Tx Specifications Frequency range (MHz) Bandwidth (MHz)
791 - 821
925 - 960
30
35
Insertion loss (dB)
Typ. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW < 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (3rd order; with 2 x 43 dBm)
Rx Specifications Frequency range (MHz) Bandwidth (MHz)
832 - 862
880 - 915
30
35 ≥ 18 (DC ON) ≥ 14 (DC OFF)
Return loss(dB) Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.3
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications DC supply voltage (V) Operating current per TMA (mA) (without RET)
9 - 30 @12 V
225 ±5
@17 V
165 ±5
@30 V
105 ±5
Alarm management
AISG
Power consumption (W)
< 3.0
Environmental Specification Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification MTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
247 x 342 x 132 (without connectors, without brackets) 300 x 545 x 250
MTMA weight (kg)
≤ 10.5 (with brackets)
Packing weight (kg)
≤ 12.3
MTMA Volume (L) AISG connector
Mounting Mast diameter (mm) Connector
312
Approx. 10.8 8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting
Default: 30 - 125 // Optional: 40 - 140 6 x 7/16 DIN Female ( Two ports are eNodeB and four ports are ANT)
MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG Model: ATADU2005
TMA
Unit : mm
313
D - 2. Combiner
Catagery
Pass Band(MHz) Band 1: 690 - 803 Band 2: 824 - 960 Band 1: 790 - 862 Band 2: 880 - 960 Band 1: 790 - 862 Band 2: 880 - 960 Band 1: 698 - 960 Band 2: 1710 - 2200 Band 1: 698 - 960
Dual-band Combiner
Band 2: 1710 - 2700 Band 1: 698 - 960 Band 2: 1710 - 2700 Band 1: 1710 - 1880 Band 2: 1920 - 2200 Band 1: 1710 - 1880 Band 2: 1920 - 2200 Band 1: 1710 - 2200 Band 2: 2490 - 2700 Band 1: 1710 - 2200 Band 2: 2490 - 2700
Max. Input power(W)
DC-Bypass
Intermodulation (dBm)
Dimension (mm)
Model
Page
300
690~803MHz DC-bypass
< -112
Double Unit: 200 x 230 x 107
ACOMD2L08
317
200
880~960MHz DC-bypass
< -110
Double Unit: 180 x 210 x 107
ACOMD2H09
320
200
All DC-bypass
< -110
Double Unit: 180 x 210 x 107
ACOMD2H18
320
300
1710~2200MHz DC-bypass
< -110
Double Unit: 130 x 190 x 105
ACOMD2H11
323
300
1710~2700MHz DC-bypass
< -110
Double Unit: 130 x 190 x 105
ACOMD2H00
326
300
All DC-bypass
< -110
Double Unit: 130 x 190 x 105
ACOMD2H22
326
300
1920~2200MHz DC-bypass
< -110
Double Unit: 160 x 154 x 103
ACOMD2H06
329
300
All DC-bypass
< -110
Double Unit: 160 x 154 x 103
ACOMD2H08
329
300
1710~2200MHz DC-bypass
< -110
Double Unit: 126 x 102 x 103
ACOMD2L04
332
300
All DC-bypass
< -110
Double Unit: 126 x 102 x 103
ACOMD2H16
332
300
All DC-bypass
< -110
Double Unit: 220 x 210 x 115
ACOMT2H04
335
300
All DC-bypass
< -110
Double Unit: 220 x 210 x 115
**ACOMT2A02
338
300
1920~2200MHz DC-bypass
< -110
Double Unit: 190 x 154 x 105
ACOMT2H01
341
300
1710~1880MHz DC-bypass 1920~2200MHz DC-bypass
< -110
Double Unit: 190 x 154 x 105
ACOMT2H03
341
Band 1: 790 - 862 Band 2: 880 - 960 Band 3: 1710 - 2200 Band 1: 790 - 862 Band 2: 880 - 960 Band 3: 1710 - 2700 Band 1: 790 – 960 Band 2: 1710 - 1880 Band 3: 1920 - 2200 Band 1: 790 – 960 Band 2: 1710 - 1880 Band 3: 1920 - 2200
Combiner
Tri-band Combiner
Catagery
Pass Band(MHz)
Max. Input power(W)
DC-Bypass
Intermodulation (dBm)
Dimension (mm)
Model
Page
300
All DC-bypass
< -110
Double Unit: 190 x 154 x 105
ACOMT2H08
341
300
All DC-bypass
< -110
Double Unit: 196 x 190 x 112
**ACOMT2A03
344
300
All DC-bypass
< -110
Double Unit: 196 x 190 x 112
**ACOMT2A04
347
300
1920~2200MHz DC-bypass
< -110
Double Unit: 215 x 200 x 105
ACOMQ2M00
350
300
All DC-bypass
< -110
Double Unit: 215 x 200 x 105
ACOMQ2H00
350
300
All DC-bypass
< -110
Double Unit: 230 x 220 x 112
**ACOMQ2A01
353
500
DC-Stop
< -117
Unit: 32 x 70.3 x 37
ADCSTOP00
356
Band 1: 790 – 960 Band 2: 1710 - 1880 Band 3: 1920 - 2200 Band 1: 690 - 960 Band 2: 1710 - 1880 Band 3: 1920 - 2200 Band 1: 690 - 960 Band 2: 1710 - 2200 Band 3: 2300 - 2690 Band 1: 790 - 960 Band 2: 1710 -1880 Band 3: 1920 - 2200 Band 4: 2490 - 2700 Band 1: 790 - 960 Quadband Combiner
Band 2: 1710 -1880 Band 3: 1920 - 2200 Band 4: 2490 - 2700 Band 1: 690 - 960 Band 2: 1710 - 1880 Band 3: 1920 - 2200 Band 4: 2300 - 2690
DC-STOP
Band: 698 - 2700
** Preliminary Issue
Combiner Description Example: DC-790-862/880-960-01 DC
790-862/880-960
01
0: band1, DC-stop, 1: band2, DC-bypass Frequency range: band1 790-862MHz, band2 880-960MHz DC: Dual-band Combiner, TC: Tri-band Combiner, QC: Quad-band Combiner
DC-690-803/824-960-10-11 Model: ACOMD2L08
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Combiner
Block Diagram
ACOMD2L08
317
DC-690-803/824-960-10-11 Model: ACOMD2L08
Electrical Properties Model
ACOMD2L08
Pass band (MHz)
Insertion loss *(dB)
DC/AISG transparency
Band 1
690 - 803
Band 2
824 - 960
Port 1 ←→ Port 2
< 0.45 (690 MHz - 803 MHz)
Port 1 ←→ Port 3
< 0.45 (824 MHz - 960 MHz)
Port 1 ←→ Port 2
By-pass (max. 2500 mA)
Port 1 ←→ Port 3
Stop
Isolation (dB)
> 47.0
VSWR
< 1.22
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBm)
< -112 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 200 x 230 x 107 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 7.9
Packing weight (kg)
≤ 9.4
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector *Insertion loss:
7/16 DIN Female (Long neck)
IL
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
318
DC-690-803/824-960-10-11 Model: ACOMD2L08
If the sign as shown above, it indicates this pass band is DC bypass.
Unit : mm
Combiner
If the sign as shown above, it indicates this pass band is DC stop.
319
DC-790-862/880-960-01 Model: ACOMD2H09 DC-790-862/880-960-11 Model: ACOMD2H18
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
ACOMD2H09
320
ACOMD2H18
DC-790-862/880-960-01 Model: ACOMD2H09 DC-790-862/880-960-11 Model: ACOMD2H18
Electrical Properties Model
ACOMD2H09
ACOMD2H18
Band 1
790 - 862
Band 2
880 - 960
Port 1 ←→ Port 3
< 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 3
< 0.25 (880 MHz - 960 MHz)
Pass band (MHz)
Insertion loss* (dB)
Port 1 ←→ Port 3
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
DC/AISG transparency
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 180 x 210 x 107 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
225 x 380 x 220
Combiner weight (kg)
Double Unit: ≤ 6.1
Packing weight (kg)
≤ 6.7
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
Combiner
*Insertion loss: IL
7/16 DIN Female (Long neck)
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
321
DC-790-862/880-960-01 Model: ACOMD2H09 DC-790-862/880-960-11 Model: ACOMD2H18
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop.
Unit : mm
322
DC-698-960/1710-2200-01 Model: ACOMD2H11
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Combiner
Block Diagram
ACOMD2H11
323
DC-698-960/1710-2200-01 Model: ACOMD2H11
Electrical Properties Model
ACOMD2H11 Band 1
698 - 960
Band 2
1710 - 2200
Port 1 ←→ Port 3
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
< 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
175 x 355 x 220
Combiner weight (kg)
Double Unit: ≤ 5.6
Packing weight (kg)
≤ 6.2
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
*Insertion loss: IL
7/16 DIN Female (Long neck)
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
324
DC-698-960/1710-2200-01 Model: ACOMD2H11
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop.
Combiner
Unit : mm
325
DC-698-960/1710-2700-01 Model: ACOMD2H00 DC-698-960/1710-2700-11 Model: ACOMD2H22
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
ACOMD2H00
326
ACOMD2H22
DC-698-960/1710-2700-01 Model: ACOMD2H00 DC-698-960/1710-2700-11 Model: ACOMD2H22
Electrical Properties Model
ACOMD2H00
ACOMD2H22
Band 1
698 - 960
Band 2
1710 - 2700
Port 1 ←→ Port 3
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
< 0.25 (1710 MHz - 2700 MHz)
Pass band (MHz)
Insertion loss* (dB)
Port 1 ←→ Port 3
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
DC/AISG transparency
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
175 x 355 x 220
Combiner weight (kg)
Double Unit: ≤ 4.2
Packing weight (kg)
≤ 4.7
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
IL
Combiner
*Insertion loss:
7/16 DIN Female (Long neck)
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
327
DC-698-960/1710-2700-01 Model: ACOMD2H00 DC-698-960/1710-2700-11 Model: ACOMD2H22
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop.
Unit : mm
328
DC-1710-1880/1920-2200-01 Model: ACOMD2H06 DC-1710-1880/1920-2200-11 Model: ACOMD2H08
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
ACOMD2H06
Combiner
Block Diagram
ACOMD2H08
329
DC-1710-1880/1920-2200-01 Model: ACOMD2H06 DC-1710-1880/1920-2200-11 Model: ACOMD2H08
Electrical Properties Model
ACOMD2H06
ACOMD2H08
Band 1
1710 - 1880
Band 2
1920 - 2200
Port 1 ←→ Port 3
< 0.25 (1710 MHz - 1880 MHz)
Port 2 ←→ Port 3
< 0.25 (1920 MHz - 2200 MHz)
Pass band (MHz)
Insertion loss* (dB)
Port 1 ←→ Port 3
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
DC/AISG transparency
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 160 x 154 x 103 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
245 x 330 x 220
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 4.8
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
*Insertion loss:
7/16 DIN Female (Long neck)
IL
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
330
DC-1710-1880/1920-2200-01 Model: ACOMD2H06 DC-1710-1880/1920-2200-11 Model: ACOMD2H08
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop.
Combiner
Unit : mm
331
DC-1710-2200/2490-2700-10 Model: ACOMD2L04 DC-1710-2200/2490-2700-11 Model: ACOMD2H16
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
ACOMD2L04
332
ACOMD2H16
DC-1710-2200/2490-2700-10 Model: ACOMD2L04 DC-1710-2200/2490-2700-11 Model: ACOMD2H16
Electrical Properties Model
ACOMD2L04
ACOMD2H16
Band 1
1710 - 2200
Band 2
2490 - 2700
Port 1 ←→ Port 3
< 0.15 (1710 MHz - 2200 MHz)
Port 2 ←→ Port 3
< 0.15 (2490 MHz - 2700 MHz)
Pass band (MHz)
Insertion loss* (dB)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
Stop
By-pass (max. 2500 mA)
DC/AISG transparency
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 126 x 102 x 103 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
170 x 265 x 220
Combiner weight (kg)
Double Unit: ≤ 3.2
Packing weight (kg)
≤ 3.6
Mounting
Wall mounting // Mast mounting Default: 40 - 135
Connector
*Insertion loss: IL
Combiner
Mast diameter (mm)
7/16 DIN Female (Long neck)
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
333
DC-1710-2200/2490-2700-10 Model: ACOMD2L04 DC-1710-2200/2490-2700-11 Model: ACOMD2H16
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop.
Unit : mm
334
TC-790-862/880-960/1710-2200-111 Model: ACOMT2H04
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Combiner
Block Diagram
ACOMD2H04
335
TC-790-862/880-960/1710-2200-111 Model: ACOMT2H04
Electrical Properties Model
ACOMT2H04 Band 1
790 - 862
Band 2
880 - 960
Band 3
1710 - 2200
Port 1 ←→ Port 4
< 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 4
< 0.3 (880 MHz - 960 MHz)
Port 3 ←→ Port 4
< 0.25 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Port 1 ←→ Port 2
> 50
Port 2 ←→ Port 3
> 50
Port 1 ←→ Port 3
> 50
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
VSWR
< 1.24
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 220 x 210 x 115 (without connectors, without mounting brackets)
Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
275 x 375 x 205
Combiner weight (kg)
Double Unit: ≤ 7.5
Packing weight (kg)
≤ 8.9
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector *Insertion loss: IL
7/16 DIN Female (Long neck)
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
336
TC-790-862/880-960/1710-2200-111 Model: ACOMT2H04
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop.
Combiner
Unit : mm
337
TC-790-862/880-960/1710-2700-111 Model: ACOMT2A02 Preliminary Issue
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port4
Port1
Port2
Port3
790 - 862
880 - 960
1710 - 2700
ACOMT2A02
338
TC-790-862/880-960/1710-2700-111 Model: ACOMT2A02 Preliminary Issue Electrical Properties Model
ACOMT2A02 Band 1
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
790 - 862
Band 2
880 - 960
Band 3
1710 - 2700
Port 1 ←→ Port 4
< 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 4
< 0.3 (880 MHz - 960 MHz)
Port 3 ←→ Port 4
< 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Port 1 ←→ Port 2
> 50
Port 2 ←→ Port 3
> 50
Port 1 ←→ Port 3
> 50
VSWR
< 1.24
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 220 x 210 x 115 (without connectors, without mounting brackets)
Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 7.5
Packing weight (kg)
≤8.4
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
Combiner
*Insertion loss: IL
7/16 DIN Female (Long neck)
339
TC-790-862/880-960/1710-2700-111 Model: ACOMT2A02
Unit : mm
340
TC-790-960/1710-1880/1920-2200-001 Model: ACOMT2H01
TC-790-960/1710-1880/1920-2200-011 Model: ACOMT2H03 TC-790-960/1710-1880/1920-2200-111 Model: ACOMT2H08
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
ACOMT2H03
ACOMT2H08
Combiner
ACOMT2H01
341
TC-790-960/1710-1880/1920-2200-001 Model: ACOMT2H01
TC-790-960/1710-1880/1920-2200-011 Model: ACOMT2H03 TC-790-960/1710-1880/1920-2200-111 Model: ACOMT2H08
Electrical Properties Model
ACOMT2H01 Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1 ←→ Port 4
< 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 4
< 0.25 (1920 MHz - 2200 MHz)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
ACOMT2H03
ACOMT2H08
Port 1 ←→ Port 4
Stop
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
Stop
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
245 x 330 x 220
Combiner weight (kg)
Double Unit: ≤ 5.6
Packing weight (kg)
≤ 6.2
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
*Insertion loss: IL
7/16 DIN Female (Long neck)
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
342
TC-790-960/1710-1880/1920-2200-001 Model: ACOMT2H01
TC-790-960/1710-1880/1920-2200-011 Model: ACOMT2H03 TC-790-960/1710-1880/1920-2200-111 Model: ACOMT2H08
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop.
Combiner
Unit : mm
343
TC-690-960/1710-1880/1920-2200-111 Model: ACOMT2A03 Preliminary Issue
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port4
Port1
Port2
Port3
690 - 960
1710 - 1880
1920 - 2200
ACOMT2A03
344
TC-690-960/1710-1880/1920-2200-111 Model: ACOMT2A03 Preliminary Issue Electrical Properties Model
ACOMT2A03 Band 1
690 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1 ←→ Port 4
< 0.15 (690 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 4
< 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
> 45
VSWR
< 1.24
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 196 x 190 x 112 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 7.0
Packing weight (kg)
≤ 7.9
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
IL
Combiner
*Insertion loss:
7/16 DIN Female (Long neck)
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
345
TC-690-960/1710-1880/1920-2200-111 Model: ACOMT2A03
Unit : mm
346
TC-690-960/1710-2200/2300-2690-111 Model: ACOMT2A04 Preliminary Issue
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
Port1
Port2
Port3
690 - 960
1710 - 2200
2300 - 2690
Combiner
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port4
ACOMT2A04
347
TC-690-960/1710-2200/2300-2690-111 Model: ACOMT2A04 Preliminary Issue Electrical Properties Model
ACOMT2A04
Band 1
690 - 960
Band 2
1710 - 2200
Band 3
2300 - 2690
Port 1 ←→ Port 4
< 0.15 (690 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.25 (1710 MHz - 2200 MHz)
Port 3 ←→ Port 4
< 0.25 (2300 MHz - 2690 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
> 45
VSWR
< 1.24
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 196 x 190 x 112 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 7.0
Packing weight (kg)
≤ 7.9
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
*Insertion loss:
348
7/16 DIN Female (Long neck)
IL
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
TC-690-960/1710-2200/2300-2690-111 Model: ACOMT2A04
Combiner
Unit : mm
349
QC-790-960/1710-1880/1920-2200/2490-2700-0010 Model: ACOMQ2M00 QC-790-960/1710-1880/1920-2200/2490-2700-1111 Model: ACOMQ2H00
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
ACOMQ2M00
350
ACOMQ2H00
QC-790-960/1710-1880/1920-2200/2490-2700-0010 Model: ACOMQ2M00 QC-790-960/1710-1880/1920-2200/2490-2700-1111 Model: ACOMQ2H00
Electrical Properties Model
ACOMQ2M00
ACOMQ2H00
Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Band 4
2490 - 2700
Port 1 ←→ Port 5
< 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 5
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 5
< 0.25 (1920 MHz - 2200 MHz)
Port 4 ←→ Port 5
< 0.2 (2490 MHz - 2700 MHz)
Pass band (MHz)
Insertion loss* (dB)
Port 1 ←→ Port 5
Stop
By- pass (max. 2500 mA)
Port 2 ←→ Port 5
Stop
By- pass (max. 2500 mA)
Port 3 ←→ Port 5
By- pass (max. 2500 mA)
By- pass (max. 2500 mA)
Port 4 ←→ Port 5
Stop
By- pass (max. 2500 mA)
DC/AISG transparency
Isolation (dB)
> 45
VSWR
< 1.28 Port 1, Port 2 Port 3, Port 4
Input power (W)
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
290 x 380 x 220
Combiner weight (kg)
Double Unit: ≤ 7.2
Packing weight (kg)
≤ 7.9
Mounting
Wall mounting // Mast mounting Default: 40 - 135
Connector
*Insertion loss:
Combiner
Mast diameter (mm)
7/16 DIN Female (Long neck)
IL
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
**Lightning protection:In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.
351
QC-790-960/1710-1880/1920-2200/2490-2700-0010 Model: ACOMQ2M00 QC-790-960/1710-1880/1920-2200/2490-2700-1111 Model: ACOMQ2H00
If the sign as shown above, it indicates this pass band is DC by-pass.
If the sign as shown above, it indicates this pass band is DC stop. Unit : mm
352
QC-690-960/1710-1880/1920-2200/2300-2690-1111 Model: ACOMQ2A01 Preliminary Issue
Product Description
Built-in lightning protection up to 10 kA. Can be used as a combiner near the BTS or in a reciprocal function near the antenna.
Designed for co-siting purposes.
Feeder sharing available.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
Block Diagram
Port1
Port2
Port3
Port4
690 - 960
1710 - 1880
1920 - 2200
2300 - 2690
Combiner
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port5
ACOMQ2A01
353
QC-690-960/1710-1880/1920-2200/2300-2690-1111 Model: ACOMQ2A01 Preliminary Issue Electrical Properties Model
ACOMQ2A01 Band 1
690 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Band 4
2300 - 2690
Port 1 ←→ Port 5
< 0.15 (690 MHz - 960 MHz)
Port 2 ←→ Port 5
< 0.30 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 5
< 0.30 (1920 MHz - 2200 MHz)
Port 4 ←→ Port 5
< 0.20 (2300 MHz - 2690 MHz)
Port 1 ←→ Port 5
By- pass (max. 2500 mA)
Port 2 ←→ Port 5
By- pass (max. 2500 mA)
Port 3 ←→ Port 5
By- pass (max. 2500 mA)
Port 4 ←→ Port 5
By- pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
> 45
VSWR
< 1.24 Port 1, Port 2 Port 3, Port 4
Input power (W)
< 300
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification Double Unit: 230 x 220 x 112 (without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 8.0
Packing weight (kg)
≤ 8.9
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
*Insertion loss:
354
7/16 DIN Female (Long neck)
IL
IL Min. Frequency 2 IL Mid. Frequency IL Max. Frequency 4
QC-690-960/1710-1880/1920-2200/2300-2690-1111 Model: ACOMQ2A01
Combiner
Unit : mm
355
DC-STOP 690-2700 Model: ADCSTOP00
Features
Used to isolate DC voltage from port 1 to port 2.
Low passive intermodulation products, low insertion loss and high power capacity.
Ultra wide band design for various communication system.
Small volume, light weight.
Dimension figure
356
DC-STOP 690-2700 Model: ADCSTOP00
Electrical Properties Model
ADCSTOP00
Frequency range (MHz)
690 - 2700
Insertion loss (dB)
Port 1 ←→ Port 2
≤ 0.1 (690 - 960 MHz // 1710 - 2700 MHz) ≤ 0.15 (960 - 1710 MHz)
Isolation for DC signal (dB)
Port 1 ←→ Port 2
≥ 70
VSWR
Port 1, Port 2
≤ 1.15 (690 - 960 MHz // 1710 - 2700 MHz) ≤ 1.2 (960 - 1710 MHz)
Input power (W)
Port 1, Port 2
Avg. ≥ 500 (690 - 2700 MHz)
RF Impedance (Ω)
50 < -117 (2 x 43 dBm carrier)
Intermodulation products (dBm)
Environmental Specification Operating temperature (℃)
-40 … +70
Application scene
Indoor or outdoor
IP rating
IP66
Lightning protection (kA)
3 (10/350 us)
Mechanical Specification 32 x 70.3 x 37 (with connectors and ground screw)
BT dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)
50 x 82 x 50
BT net weight (kg)
< 0.32
Packing weight (kg)
< 0.45 Port 1
7/16 DIN Male
Port 2
7/16 DIN Female
Combiner
Connectors
357
E. Bracket&Installation Guide E - 1. Bracket E - 1 - 1. Tri-sector Bracket
Bracket Type
Antenna Width Required
Weight (Kg)
Dimension (mm)
Model
Page
TSC-S (3 Sector Clamp-Small)