• Author / Uploaded
• Ramses Diaz

Citation preview

Manual GENIUS: CASALI JA400 TM433 and CASALI JA401 TM433 How to set up your remote control with Mini Switches?

You will find mini-switches also called “dip switches” inside your remote control. In order to make the device work properly, you have to enter a code as follows: 1) Start by opening the case of your old remote control or any other remote control that works with your garage door or entry gate. www.ChronoRemoteControl.com

2) Now open the case of your new remote. 3) Reproduce the exact same combination of switches by setting them in the same positions as on the old device. This operation can be performed using a pen tip or a screwdriver. Warning: Some remote controls can contain several extra pairs of dip switches. These dip switches must be set in the same position as on the original remote. 4) Close the remotes. 5) You can now verify the proper functioning of your new remote control.

Warning: If you don’t have an old remote, you can simply open your receiver box where you will also find the dip switches in the same position as in the original remote. Reproduce this combination on your new remote control.

www.ChronoRemoteControl.com