FULL-SIZE WOOD TOY KENWORTH DUMP TRUCK PLAN SET READ BEFORE Please “SAVE” the PDF ile before you print pages. To conse
Views 77 Downloads 3 File size 9MB
FULL-SIZE WOOD TOY
KENWORTH DUMP TRUCK
PLAN SET READ BEFORE Please “SAVE” the PDF ile before you print pages. To conserve printing ink we recommend that you print only the black and white precision line pattern drawings pages in the plan set.
Itʼs all quick and easy to make with no fancy joints or cuts. Build it using common tools and with easy to ind materials and supplies. 312mm L x 140mm H x 100mm W Finished Model is approximately
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
1
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and inishes are non-toxic when dry. 2
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
KENWORTH DUMP TRUCK
Warning: Read before copying. Note to the Readers: Due to different conditions, tools, and individual skills, I assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of following the information published in this plan set. Before beginning any project review instructions carefully. If any doubts or questions remain consult local experts or authorities. Copyright Information: Plans and patterns in this Plan Set can be photo-copied for personal use when building the toys. plans and patterns are cannot be distributed or shared for free or for any other reason.
Make as many of each toy as you like! this plan set are royalty-free. You have the right to build any quantity of these toys for any reason.
FULL-SIZE WOOD TOY PLAN SET Color & Natural Wood Pictorial Views ............................................................. 4 - 9 KENWORTH DUMP TRUCK (T370) Index, Parts List ................................... 10 - 13
Mang Daneh
AOBiWorkshop AOBiWorkshop.com
Greeting From Indonesia
KENWORTH DUMP TRUCK (T370) Patterns Index, and How-Toʼs......... 14 - 22
Dani Hadiyantara @danehsekali
Full-Size Precision Line Patterns.......................................................................... 23 - 34 Cartoning and Labels .............................................................................................
35 - 36
AOBiWorkshop
3
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and inishes are non-toxic when dry.
4
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and inishes are nontoxic when dry.
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
5
0
20
10
30
40
Wood Toy Plan
50
printer scale
KENWORTH DUMP TRUCK (T370)
ACTUAL SIZE(mm)
To view page 6-7 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and inishes are non-toxic when dry.
6
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
0
20
10
30
40
50
printer scale
ACTUAL SIZE(mm)
To view page 6-7 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and inishes are non-toxic when dry.
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
7
0
20
10
30
40
Wood Toy Plan
50
printer scale
KENWORTH DUMP TRUCK (T370)
ACTUAL SIZE(mm)
To view page 8-9 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and inishes are non-toxic when dry.
8
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
0
20
10
30
40
50
printer scale
ACTUAL SIZE(mm)
To view page 8-9 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and inishes are nontoxic when dry.
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
9
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
B
A
10
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
KENWORTH DUMP TRUCK (T370) Parts List 34
63
59
33
66
53 45 51
56
8
55
61
14 13
12
32
16
64
61
4
53
19
36
44
51 50
51 48 45
59 44
44 45
58
23 27
47
10
1 48
2
26
28
27
8
3
53 66 57
2 30
42
43
44
45
16
8 23 22
3
17 19
3
9
19
18 5 46 44
11 12
6
22 22
17 52
10
36
41
41 42
26
43
18
2 40
35
6
51
38
45
49 37
10
3 50
62 51
44 45
49
65
22 25
37
25
19
3a
66 21
24 35
24
16
46 5
9
38
63 10
64
60
11
31 10
3
47
44
3a 39
55
10
45
12 11 2
3
67
3a
1
32
30 6
20 57
60 61
34
41
51 62
15 7
29
44 42
42 41
59
45
43
43
44
51 54 52
3a
6
54
57 58
9
56 66 61
45
19
3 24
47
25
34 43
29
32
38
54 10
43
23
24
25 42
26 44
42
44
44
44
27 4
44
4
10
9
4
28
10
14
54
this part use 3mm thick
10
52 4
59
59
54 24
13
23
13
58
58
55
44 45
45
20
7 55
62 57
24 2
18
57
55
17 2 46 42
15
46
62
12
12
55
15
11 11
42
49
63
31 48
39
29
47
36
29
53
47
30
17
50
center pin
34 2
2 40
56
25
66
66
18
41
65
center pin
41 27
33
27
43
26
22
60
61
61
5
1. 2. 2a. 3. 3a. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
5
64
68
64
61
51
29
64
35
30
32
6mm thick make 1 10mm thick make 2 10mm thick make 2 6mm thick make 1 6mm thick make 1 6mm thick make 4 10mm thick make 2 6mm thick make 2 3mm thick make 1 6mm thick make 1 6mm thick make 2 6mm thick make 3 3mm thick make 2 3mm thick make 2 wire 1mm dia. 60mm long make 2 6mm thick make 2 3mm thick make 2 6mm thick make 1 10mm thick make 2 10mm thick make 2 6mm thick make 2
28 37
21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40.
31
41 43
41 43
43
32
use wire mesh make 1 2.5mm dia. x 30mm long make 8 14mm thick make 1 18mm thick make 2 3mm thick make 2 20mm dia. x 10mm long make 4 3mm thick make 2 20mm dia. x 24mm long make 2 3mm thick make 2 6mm dia. x 30mm long make 2 6mm dia. x 15mm long make 2 10mm dia. x 50mm long make 2 6mm dia. x 25mm long make 2 6mm dia. x 12mm long make 2 10mm dia. x 45mm long make 1 3mm thick make 1 4mm dia. x 40mm long make 1 6mm thick make 1 2.5mm dia. x 38mm long make 1 2.5mm dia. x 16mm long make 1 Mang Daneh
AOBiWorkshop
21
41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60.
33
53
10mm thick make 4 3mm thick make 4 10mm thick make 4 3mm thick make 6 6mm thick make 6 10mm thick make 2 6mm thick make 6 6mm dia. x 75mm long make 1 6mm dia. x 94mm long make 2 3mm thick make 1 6mm dia. x 3mm long make 6 6mm thick make 1 3mm thick make 2 3mm thick make 2 3mm thick make 4 6mm thick make 1 3mm thick make 2 3mm thick make 2 3mm thick make 2 3mm thick make 1 AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
34
61. 62. 63. 64. 65. 66. 67. 68.
3mm thick make 3 6mm thick make 2 3mm thick make 1 6mm thick make 4 6mm thick make 1 2.5mm dia. x 10mm long make 2 4mm dia. x 52mm long make 1 6mm thick make 1
11
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) 51 51 50
34 9 34
A
41 42 43
9
33
12 15
10
8
10
10
14
42
43 44
18
19
5 36
26 45
16
35
29
42
19
17
27
24
20 21
37
48
38
40
22
25
46 44
47
23
45
12
Mang Daneh
AOBiWorkshop
26
2a
39
28
29
27
5
1
3
40
27
26 41
13
7
12
24
2 2
4
29 28
3a
15
49
43
44
11
30
49
41
45
30
27
2a
4
6
52 31
26
4 31
44
41
13 11
4
32 32
45
14
6 33
43 44 45
42
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
17
18
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
B
63
54
66
53
55
56
55 57 59 61
58
66 54
58 60
53 59
55
57
61 55 61
65
68 62
64
64
67
Mang Daneh
62
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
13
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) 4 4
2a
4 2
3
4
1 2
Step 1 Assembly
2a
3a
Step 1 Assembly Step 1: Using the Plan Views on pages 23-26 as a guide, glue and clamp four part 4 to the left side and right side each part 3 and part 3a. let assembly dry before proceeding.
Step 2: Using the Plan Views on pages 23-26 as a guide, glue and clamp part 2 to the step 1 assembly to part 2 to theleft side part 1, glue and clamp part 2 to the step 1 assembly to part 2 to the rightside part 1. let assembly dry before proceeding. 7
10 10
40
10
Step 3 Assembly
Step 2 Assembly Step 3: Using the Plan Views on pages 34-38 as a guide, glue and insert 3 part 10 to the step 2 assembly. let assembly dry before proceeding.
14
Mang Daneh
Step 4: Using the Plan Views on pages 19-24 as a guide, insert and glue part 7 to part 20 to the step 3 assembly. let assembly dry before proceeding.
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) 26
Step 5 Assembly
12
6 11 26 12
Step 4 Assembly
6
11
Step 5: Using the Plan Views on pages 23-26 as a guide, glue and clamp two part 6 and two part 20 to the left side and the right side of the step 4 assembly. let assembly dry before proceeding.
Step 6: Using the Plan Views on pages 23-26 as a guide, Glue and clamp part 12 to part 11 to the left side and the right side of the step 5 assembly. Let assembly dry before proceeding.
9 9 8
52
Step 7 Assembly
Step 6 Assembly
Step 7: Using the Plan Views on pages 23-26 as a guide, insert and glue part 8 to the step 6 assembly and two part 9 to part 8
Mang Daneh
Step 8: Using the Plan Views on pages 23-26 as a guide, insert and glue part 52 to the front side of the step 7 assembly. let assembly dry before proceeding.
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
15
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
19 18 17 19
18
17
16
Step 8 Assembly
Step 9 Assembly
Step 10 Assembly Step 9:
Step 10:
Step 11:
Using the Plan Views on pages 23-26 as a guide, glue and clamp part 19 to part 18 to part 17 to the left side and the right side pat 16. let assembly dry before proceeding.
Using the Plan Views on pages 23-26 as a guide, marked the step 9 assembly an cut( the marked in red). Let assembly dry.
Using the Plan Views on pages 23-26 as a guide, Glue and inser the step 10 assembly to the step 8 assembly. Let assembly dry.
Step 12 Assembly
20
24
Step 13 Assembly
21 22 24
25
Step 11 Assembly
Step 12: Using the Plan Views on pages 23-26 as a guide, glue and clamp two part 24 to the left side and the righ side of the step 11 assembly. Let assembly dry.
16
Step 13: Using the Plan Views on pages 23-26 as a guide, insert and glue eight part 22 to front side part 20 and part 21 to backside part 20. Let assembly dry.
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
25
23
Step 14: Using the Plan Views on pages 23-26 as a guide, glue and clamp the step 13 assembly, two part 25 and part 23 to the front side of the step 12 assembly. Let assembly dry.
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) Step 14 Assembly
Step 15 Assembly 26 28
29
27 27
Step 16 Assembly
29
26
Step 16 Assembly
Step 15: Using the Plan Views on pages 23-26 as a guide, Glue and clamp part 26 to part 27 to the left side and right side part 28. Let assembly dry.
Step 16: Using the Plan Views on pages 23-26 as a guide, insert and glue two part 29 to the step 15 assembly. Let assembly dry. do the step 15 assembly and the step 16 assembly to one set other
Step 17: Using the Plan Views on pages 23-26 as a guide, insert and glue the step 16 assemblies to the left and the rightside of the step14 assembly. Let assembly dry.
Step 19 Assembly
Step 19 Assembly 14
13
Step 18 Assembly
15
Step 17 Assembly Step 18: Using the Plan Views on pages 23-26 as a guide, glue and clamp part insert ind glue part 14 to part 13
Step 19: Using the Plan Views on pages 2326 as a guide, glue and clamp part 15 to the step 18 assembly. do the step 18 assembly and the step 19 assembly to one set other
Mang Daneh
Step 20: Using the Plan Views on pages 23-26 as a guide, insert and glue the step 19 assembly to the left side and the right side of the step 17 assembly.
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
17
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) Step 21 Assembly
34
Step 22 Assembly 31
32 33
Step 23 Assembly
30
Step 21: Using the Plan Views on pages 23-26 as a guide, glue part 34 to part 33
Step 22: Using the Plan Views on pages 23-26 as a guide, insert and glue the step 21 to part 32
Step 24 Assembly
Step 23: Using the Plan Views on pages 23-26 as a guide, glue part 31 to part 30
Step 24 Assembly
Step 24: Using the Plan Views on pages 23-26 as a guide, insert and glue the step 23 assembly to the step 22 assembly. do the step 21, the step 22, the step 23 , the step 24 assembly to one set other
Step 25 Assembly
Step 20 Assembly
51
50 51
Step 25:
Step 26:
Using the Plan Views on pages 23-26 as a guide, insert and glue the step 24 assembly to the left side and the right side of the step 20 assembly. Let assembly dry.
Using the Plan Views on pages 23-26 as a guide, glue and clamp six part 51 to part 50, part 50 to the step 25 assembly. Let assembly dry.
18
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
Step 27 Assembly
35
38 42
37
41
44 45
36
Step 27: Using the Plan Views on pages 23-26 as a guide, insert 37 to part 35, insert part 36 to part 37, glue part 36 to pasrt 35 in a position that allows part 37 move up and down freely. Let assembly dry.
Step 28: Using the Plan Views on pages 23-26 as a guide, insert and glue part 38 to part 37 of the step 27 assembly. Let assembly dry.
Step 29: Using the Plan Views on pages 23-26 as a guide, glue and clamp part 45 to part 44, part 44 to part 42, part 42 to part 41. Let assembly dry.
Step 29 Assembly Step 31 Assembly 46 47 43
44 45
Step 30: Using the Plan Views on pages 23-26 as a guide, glue and clamp part 43 to the step 29 assembly. Let assembly dry. do the step 29 and the step 30 to one set other
Step 31: Using the Plan Views on pages 23-26 as a guide, glue and clamp part 47 to part 46. Let assembly dry.
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
Step 32: Using the Plan Views on pages 23-26 as a guide, insert and glue part 45 to part 44, part 44 to the step 31 assembly. Let assembly dry. do the step 31 and the step 32 assembly to one set other AOBiWorkshop
19
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) Step 26 Assembly
39
Step 33 Assembly
Step 32 Assembly Step 30 Assembly
Step 32 Assembly Step 28 Assembly
48
49
Step 33: Using the Plan Views on pages 23-26 as a guide, insert part 39 to the step 26 assembly thru the step 28 assembly, glue part 39 to the step 26 assembly in a position that allows the step 28 assembly rotate freely Step 30 Assembly Step 34: Using the Plan Views on pages 23-26 as a guide, insert two part 49 axle and part 48 axle into the step 32 assembly. Glue part 49s to the step 30 assembly and part 48 to the step 32 assembly in a position that allows the step 30 assembly and the step 32 assembly mrotate freely
20
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) Step 35 Assembly
Step 36 Assembly
54 55
56 53
54 53 58
65
55
57
Step 36 Assembly Step 35: Using the Plan Views on pages 23-26 as a guide, glue and clamp part 54 and two part 55 to the left side part 53. and one set other to the right side of part 53. Let assembly dry.
Step 36: Using the Plan Views on pages 23-26 as a guide, glue and clamp part 57 on the outside of the step 35 assembly and the part 58 on the inside of the step 35 assembly. do this step to onestep other.let assembly dry.
Step 37: Using the Plan Views on pages 23-26 as a guide, glue and clamp the step 36 assembly to the right side and the leftside part 65, and part 56 to the front side part 65. Let assembly dry.
63
Step 39 Assembly 59
61 61
60 61
Step 37 Assembly Step 38: Using the Plan Views on pages 23-26 as a guide, glue and clamp part 3 to the step 37 assembly.
59
Step 39: Using the Plan Views on pages 23-26 as a guide, glue and clamp two part 59 to tje left side and the right side of part 60.
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
Step 40: Using the Plan Views on pages 23-26 as a guide, glue and clamp three part 61 to the step 39 assembly.
AOBiWorkshop
21
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
Step 38 Assembly
66
62
64 68
64
Step 40 Assembly
Step 41 Assembly
62 66
Step 42 Assembly Step 41: Using the Plan Views on pages 23-26 as a guide, insert two part 66 axle into the Step 38 Assembly thru the step 40 assembly. Glue two part 66 axle to the step 38 assembly in a position that allows the step 40 assembly rotate freely. Let assembly dry.
Step 42: Using the Plan Views on pages 23-26 as a guide, glue and clamp two part 62 to theleft side and the right side of two part 64 and part 68. Let assembly dry.
Step 43: Using the Plan Views on pages 23-26 as a guide, glue and clamp the step 42 assembly to the step 41 assembly. Let assembly dry.
Step 43 Assembly
Step 44 Assembly
40
67
Step 34 Assembly
Step 44: Using the Plan Views on pages 23-26 as a guide, insert part 67 to the step 43 assembly thru the step 34 assembly. glue part 67 to the step 43 assembly in position that allows the step 43 assemly rotate freely
22
Mang Daneh
Step 45: Using the Plan Views on pages 23-26 as a guide, insert part 40 to part 38 of the step 28 assemblythru part 68 of the step 44 assembly. glue part 40 in a posistion that allow the step 44 move up and down freely. Let assembly dry.
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
0
KENWORTH DUMP TRUCK (T370)
20
10
30
40
50
printer scale
ACTUAL SIZE(mm)
KENWORTH DUMP TRUCK
Side Plan View 66
54
61
ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE.
59 55
61 57
60
53 55
61 IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 23 through 34. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.
10
10
3
35
37 36
44
38
44
51 45
45
50
43 43
312mm L x 140mm H x 100mm W Finished Model is approximately Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
23 AOBiWorkshop
20
10
0
30
40
Wood Toy Plan
50
printer scale
KENWORTH DUMP TRUCK (T370)
ACTUAL SIZE(mm)
34
63
KENWORTH DUMP TRUCK
33 9
56
8
Side Plan View 52 15 14
7
13
12
32
16
IMPORTANT NOTE
20 4 11
19 21 24
22
31
To print out enough paper patterns for the entire plan set from your computer printer only print pages 23 through 34. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.
25
26
27
ATTENTION:
26
28
23 27
48 45 44
47
THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE.
312mm L x 140mm H x 100mm W 24
Finished Model is approximately Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
0
KENWORTH DUMP TRUCK (T370)
66
40
50
ACTUAL SIZE(mm)
KENWORTH DUMP TRUCK
B 59
30
20
10
printer scale
Top Plan View 54
57 53 58
51
56
51 51 62 3
67 63 63
64
61 64
60
49
10 65
66 3 50
62 51 51 51 58 59
53 66 57
54
ATTENTION:
IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 23 through 34. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.
312mm L x 140mm H x 100mm W
THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE.
Finished Model is approximately Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
25 AOBiWorkshop
0
40
30
20
10
50
Wood Toy Plan
printer scale
KENWORTH DUMP TRUCK (T370)
ACTUAL SIZE(mm)
KENWORTH DUMP TRUCK
A 45 44
45
43
43
Top Plan View 29
44
34
32
42
42 41
45
12
30
11
41
46
2
6
49 37
10
35
18
3a
52
40
10
8
10
1
36 3
48
41
42 44 45
2
43
12
42 45
44
23 22
18 5 46 44
11 30
16 17
3
9
6
22 22
17
2
41
19
2
38
25
5
9
3a 39
24
47
44
45
19 24 47
25
34 43
29
32
ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE.
312mm L x 140mm H x 100mm W 26
Finished Model is approximately Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
1.
This part use 6mm thick (Just short of 1/4")
6mm thick make 1
16.
2.5mm dia. hole thru (1/16" )
6.
6mm thick make 2
6mm thick make 1 3a
6 7mm dia. hole thru (Little over 1/4")
1
2.5mm dia. hole thru (1/16" )
16 6
7mm dia. hole thru (Little over 1/4")
19
2.5mm dia. hole thru (1/16" )
4mm dia. hole thru (1/4" )
19
3
19.
6mm thick make 2
52.
6mm thick make 1
14. 6mm thick make 2 9. 6mm thick make 2 10. 6mm thick make 3 4.
6mm thick make 4 1mm dia. hole thru
4
4
7mm dia. hole thru (Little over 1/4")
4
10
10
52 10
9
4 14 Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
27
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) 7mm dia. hole thru (Little over 1/4")
4mm dia. hole thru (1/4" )
6mm dia. hole thru
3.
3a
6mm thick make 1
3a.
6mm thick make 1
2.5mm dia. hole thru (1/16" )
7mm dia. hole thru (Little over 1/4") part 8 side view
8
3
8.
7mm dia. hole thru (Little over 1/4")
38
4mm dia. 4mm deep (1/4" ) 38.
28
6mm dia. hole thru
2.5mm dia. hole thru (1/16" )
6mm thick make 1
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
6mm thick make 1
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
18.
This part use 10mm thick (Little over 3/8 inch)
10mm thick make 2 2.
10mm thick make 2
17 2
2
18
17.
10mm thick make 2
17
2a.
10mm thick make 2
18 2a
5
5
5.
2a
10mm thick make 2
7mm dia. hole thru (Little over 1/4")
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
29
Wood Toy Plan
KENWORTH DUMP TRUCK (T370) This part use 18mm thick (just short of 3/4")
this part use 14mm thick
13
23
13
24
23.
14mm thick make 1 13.
24
24.
18mm thick make 2
49.
DOWELS 31.
6mm dia. x 15mm long make 2
31 30.
6mm dia. x 30mm long make 2
30 34.
33.
39.
48.
6mm dia. x 75mm long make 1
66
66 67.
49 6mm dia. x 94mm long make 2 48
39 2.5mm dia. x 38mm long make 1
4mm dia. x 52mm long make 1
66.
2.5mm dia. x 10mm long make 3
40.
2.5mm dia. x 16mm long make 1
22.
22 2.5mm dia. x 30mm long make 8
40
6mm dia. x 12mm long make 2 34
26
6mm dia. x 25mm long make 2
33 51.
wire 1mm dia. 60mm long make 2
26.
20mm dia. x 10mm long make 4 5mm dia 36mm deep 35
2.5mm dia hole thru
6mm dia. x 3mm long make 6 51
35.
10mm dia. x 45mm long make 1
28 32. 10mm dia. x 50mm long make 2 32 6mm dia. 3mm deep
30
37 28.
20mm dia. x 24mm long make 2
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
37.
AOBiWorkshop
4mm dia. x 40mm long make 1
Wood Toy Plan KENWORTH DUMP TRUCK (T370)
This part use 3mm thick 42
44. 44
42
3mm thick make 6
44
44
44
44
This part use 6mm thick 6mm dia. hole thru (Just short of 1/4")
6mm dia. hole thru (Just short of 1/4")
44
46.
6mm dia. hole thru (Just short of 1/4")
10mm thick make 2
6mm dia. hole thru (Just short of 1/4")
6mm dia. hole thru (Just short of 1/4")
6mm dia. hole thru (Just short of 1/4") 46
46
42
45
45
42
42.
3mm thick make 4 47
6mm dia. hole thru (Just short of 1/4")
47
6mm dia. hole thru (Just short of 1/4")
41
45.
6mm thick make 6
47.
6mm thick make 6
This part use 10mm thick
41
43.
43
6mm dia. hole thru (Just short of 1/4")
10mm thick make 4
6mm dia. hole thru (Just short of 1/4")
41 41
43
41.
43
43
10mm thick make 4 Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
31
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
2.5mm dia. hole thru (1/16" dia) 7.
this part use 3mm thick 12.
3mm thick make 2
3mm thick make 1 20
7
1mm dia. hole thru 12
12 15
1mm dia. hole thru
15
11 11
20.
3mm thick make 1 15. 29
29.
3mm thick make 2 36
29
36. 3mm thick make 1 4mm dia. hole thru
11.
3mm thick make 2
3mm thick make 2 25 50
center pin
27
27.
center pin
25. 50.
27
3mm thick make 1 21.
3mm thick make 2
use wire mesh make 1
21
32
Mang Daneh
AOBiWorkshop
3mm thick make 2
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
3mm thick make 4
55 55 57
57
58.
55 55
2.5mm dia. hole thru (1/16" dia)
63
63. 53.
3mm thick make 1
53
3mm thick make 2
60.
3mm thick make 1
60
61
61
61
61. 3mm thick make 3
55.
58
58
59
3mm thick make 2
54
59
59.
54
3mm thick make 2
3mm thick make 2
3mm thick make 2
54.
this part use 3mm thick
57.
KENWORTH DUMP TRUCK (T370)
53
33 Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
4mm dia. hole thru (1/4" )
62.
6mm thick make 2
This part use 6mm thick (Just short of 1/4")
4mm dia. hole thru (1/4" )
62 62
56
65
64 68
64
64. 68.
6mm thick make 1
56.
6mm thick make 1
34
6mm thick make 2
2.5mm dia. hole thru (1/4" )
65.
Mang Daneh
AOBiWorkshop
6mm thick make 1
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
Wood Toy Plan
KENWORTH DUMP TRUCK (T370)
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop
35
BOX LABEL
KENWORTH DUMP TRUCK (T370)
Handmade Wood Toy
Built By:
KENWORTH DUMP TRUCK (T370)
Handmade Wood Toy
Built By:
36
Mang Daneh
AOBiWorkshop
AOBiWorkshop.com
@ AOBiWorkshop 2020
AOBiWorkshop