ALIMAK SC45/30 Construction Hoist for Passengers and Materials Access anytime, anywhere ALIMAK SC45/30 Green Products
Views 93 Downloads 1 File size 944KB
ALIMAK SC45/30 Construction Hoist for Passengers and Materials
Access anytime, anywhere
ALIMAK SC45/30 Green Products, Due to the light and optimized design, Alimak hoist has better performance, speed and capacity as our competitors 3 motor drive. Further on, the power consumption and requirement of power supply fuses is lower. Size of the electric power cables can as well be minimized and will reduce cost for end user
Mast Section
NEW Cage
Lighter and stronger mast section with high grade material. Centrally located racks, balance force for mast pipe and guide rollers. Galvanized mast section and tie-in to extend life time.
Stronger, lighter & compact cage design thus less power consumption. Professional painting system, Solid cage frame and welded panels, Less vibration and noise, longer life span.
VFC Control
Drive unit
Smooth starting and stopping, less wear & tear with better landing accuracy. Wide voltage range to suit to all market. Special design VFC motor
High efficiency helical gear box, lower power consumption and operation cost. Safe and reliable with bigger brake system. Quicker access for service
Recess Electrical Panel Clean, neat & spacious cage interior with recessed control panel, more useful space.
Base enclosure
LED lighter
Vertical base enclosure door, less installation space requirement
High lumen, less power consumption.
Ramp door Easy to access landings, needless to build special landing bridge
ALIMAK SC45/30 Alimak Hek is established in year 1948, as a global leader of Rack & Pinion technology vertical access solution. We have taken a good idea and continue to make it better. Our product development is a Our partner – Wherever, Whenever we are needed. The original – with quality and never-ending process of small and large steps on the way towards perfection. By meeting new needs and solving new problems, we continue to keep our products at the forefront.
reliability unsurpassed by none!
2006
1948
Alimak was founded by Alvar Lindmark.
1961
Hek was founded by P. J. van Hek.
1962
Introduction of the Rack & Pinion driven construction hoist
2014
1966
1948
The first permanent industrial lift was installed.
1983
Introduction of top driven hoist
1998
Introduction of helic gearbox
2006
Alimak Hek start up manufacturing in Changshu,China.
2014
Introduction of new range SC65/32
1998 1961
1983
1966
1962
ALIMAK SC45/30
ALIMAK SC45/30 Main Characteristics
Compact design and comfortable operating environment Proven helical gearbox Single and dual car configurations Design without counterweight Multiple choices of doors Simple and easy operating system Recessed control panel PLC control as an option Durable materials: high quality steel for increased strength and weight reduction, hot dip galvanized mast section and tie-in Wide range of tie-in Wide range of optional equipment and functions *
DOL
FC
Max. Payload capacity
SC45/30
2000 kg
2000 kg
Traveling speed
36 m/min
0~60 m/min
Max. Lifting height *
150 m
180 m
Car width, internal
1.4 m
1.4 m
Car length, internal
3.0 m
3.0 m
Car height, internal
2.13 m
2.13 m
DOL
FC
2 x 8.5 KW
2 x 16.4 KW
SAJ30-1.2 or Alimak GF
SAJ40-1.4 or Alimak GF
450 x 450 x 1508 mm, tubular steel with integrated rack
450 x 450 x 1508 mm, tubular steel with integrated rack
5
5
Motor control No. of motors and power Safety device type* Dimension of Mast Section Rack module
*Increased lifting height on request.
www.alimakhek.com Alimak Hek Vertical Access Equipment (Changshu) Co., Ltd is ISO 9001 certified.
Pictures are illustrative only and do not necessarily show the configuration of products on the market at a given point in time. Products must be used in conformity with safe practice and applicable, statutes, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice. Copyright © Alimak Hek Vertical Access Equipment (Changshu) Co., Ltd. All rights reserved. Alimak Hek, Alimak and Scando are registered trademarks of Alimak Hek Group AB.