• Author / Uploaded
• AHTuGPbI3

• Categories
• 4 G
• Inalámbrico
• Ingeniería de difusión
• Ingeniería en telecomunicaciones
• Ingeniería Electrónica

Citation preview

Huawei Antenna & Antenna Line Products Catalogue 2019 HUAWEI TECHNOLOGIES CO.,LTD.

In 2018, commercial deployment of 5G networks has begun. In the next few years, 5G deployment will be the most important topic for global operators. However, 5G network deployment will face many new challenges due to the 5G network characteristics. 1. The introduction of new spectrums requires deployment of more antennas. 5G NR has two spectrum ranges. FR1 corresponds to 450–6000 MHz and FR2 corresponds to 24250–52600 MHz. 5G has much wider spectrum ranges than 4G. New antennas must be deployed for 5G base stations to support new frequency bands. 2. 5G networks require large capacity. High-order MIMO will be widely used. 4T4R and 8T8R will be widely deployed to serve the basic coverage of 5G. C-band Massive MIMO and mmWave Massive MIMO will also be deployed on a large scale to meet high capacity requirements. 3. 5G networks require simpler sites. As mobile networks develop from 2G to 4G, sites become more and more complicated. A large number of sites have no extra space for new 5G antennas. In addition, 5G uses higher frequency spectrum and requires higher network density, which greatly increases the network construction cost of operators. Therefore, how to simplify sites to save the costs of 5G network construction and operation has become an urgent issue to be solved for operators.

As a leading global ICT infrastructure provider, Huawei is committed to addressing the challenges of network deployment and development. To meet the challenges of 5G network deployment, Huawei first proposed the antenna 1+1 modernization strategy in 2017. The key idea is to use one passive antenna to incorporate 2G, 3G, and 4G frequency bands and use one antenna to deploy 5G, such as C-band Massive MIMO. This solution simplifies site configuration and reduces 5G deployment costs, which helps to achieve fast 5G deployment. Huawei showcased three forms of antenna 1+1 in the 5G era for the first time in 2018 Global Antenna Technology & Industry Forum. 1+1 Side by Side: Two poles are used to deploy passive antennas and 5G Massive MIMO, which are applicable to scenarios where site space is sufficient. 1+1 Stacked: Passive antennas and 5G Massive MIMO are deployed on a single pole in stacking mode. 1+1 Mechanical Integrated: Passive antennas and Massive MIMO are presented as one antenna, which simplifies site license acquisition and reduces boxes on tower.

1+1 Side by Side

1+1 Stacked

1+1 Integrated

In addition to continuous innovation in multi-band, FDD+TDD, and multi-sector antennas, Huawei has also launched two antenna integration solutions: antenna with cabinet suite for Massive MIMO (ACSM) and antenna with cabinet suite for RRU (ACSR). These solutions make 1+1 a reality and truly help operators achieve simplified antenna deployment.

Munich platform series

London platform series

•

Highest integration in the industry, compact SBS architecture, small size, and high gain

•

FDD full-band 4T4R and 5G NR 8T8R All-in-one, driving fast 5G deployment

•

Support for Sub 3GHz full-band 4T4R, including L band 4T

•

Array interleaved design. The size of the antenna is reduced by 20% compared with antenna using traditional technologies

FDD: 2*690-960/ 1427-2690/ 2*1695-2200/ 2*2490-2690 MHz TDD :2300-3800 MHz Width: 449mm

2*690-960/2*1427-2690/2*1695-2200/2*2490-2690 MHz Width: 469mm

Bangkok platform series •

•

Snake-shaped array architecture, excellent ultra wideband multi-beam performance, and support for simultaneous splitting of 1800 MHz, 2100 MHz, and 2600 MHz

Vancouver platform series •

Supporting 600 MHz low-band 2T/4T

•

Compact SBS architecture, reduced size by 10% compared with traditional stacked architecture, and high performance

Support hybrid networking of low-band 2T2R/4T4R three-sector and high-band 4T4R six-sector

2*690-960/4*1695-2690 MHz Width: 499mm

2*617-894/4*1695-2690 MHz Width:499mm

ACSM •

Integrated deployment of passive antennas and Massive MIMO antennas on one pole, simplifying site license application and reducing the number of boxes on tower

•

Independent configuration and deployment of passive antennas and Massive MIMO

One box for P + A Antenna for 5G

Massive MIMO

ACSM

Passive antenna, flexible configuration

Massive MIMO

ACSR •

Integrated deployment of passive antennas and RRUs, reducing the number of boxes on tower

•

Independent configuration for passive antennas and RRUs, enabling flexible deployment

One box for antenna and RRU

RRU

ACSR

Passive antenna, flexible configuration

RRUs, flexible configuration RRU

Continuous Innovation Huawei Antenna has been keeping No.1 market share and innovation ability since 2015. Continuous growth enables long term investment on antenna related research and development. Huawei currently has seven R&D centers committed to the research of active and passive antenna technologies all over the world. The R&D centers are located in Munich/Germany, Ottawa/Canada, Stockholm/Sweden, Moscow/Russia, Shenzhen/China, Xi'an/China, and Shanghai/China. With more than 20 years' experience in wireless networks, Huawei coordinates the antennas and the RAN for the best antenna performance.

Stockholm, Sweden Moscow, Russia Munich, Germany Ottawa, Canada Xi'an, China Shanghai, China Shenzhen, China

AAS & Passive antenna

AAS

Passive antenna

Distribution of Huawei antenna R&D centers around the world

Industry Contribution Huawei has been committed to promoting continuous development and progresses of the antenna industry. •

So far, Huawei is a member of more than 50 standards organizations and has continuously contributed to industry standards.

•

Huawei and operators have successfully held the Global Antenna Technology & Industry Forum for seven times. This forum attracts global mainstream operators, third-party organizations, tower companies, industry organizations, and industry media outlets, and has become an important platform for discussion on future antenna technologies and industry development.

•

Co-leader and main contributor of the NGMN Cluster Connector Alignment project

•

Main contributor of P-BASTA 10.1

•

Leader and main contributor of BASTA AAS Group

•

Main contributor of AISG 3.0

Antenna Type Naming Rule Example: D -XXXXX - 690-960/1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-B/R

Diagram: X1

X2

X3

Polarization

Antenna type

X4

X5

Half-power beamwidth

Frequency range

X6

Downtilt type

Gain

Antenna characteristic

D

Directional

O

Omni-directional

C

Cluster

I

Indoor

Number + M

Multi Beam, 3M means three beams

CP

Camouflage Pipe

CS

Camouflage Square Column

X

X Polarization

V

Vertical Polarization

H

Horizontal Polarization

C

Circular Polarization

X3

Number

Frequency Bandwidth

X4

Number

Half-power Beam Width

X5

Number

Gain(dBi)

Number + Letter

0F: Fixed Downtilt

Letter

M: Electrical Downtilt

C

Combiner Integrated

B

Bias Tee Integrated

T

TMA Integrated

R

RCU Integrated

AS

Azimuth Steering

HE

High Efficiency

ESLS

Enhanced Side Lobe Suppression

AISU

Antenna Information Sensor Unit

X1

X2

X6

X7

X7

** For antennas with 14 or more ports, the same letters are represented in the “Number + Letter" format for the X2, X3, X4, and X6 bits. For example, for the "X2" bit, "7X" indicates "XXXXXXX".

Product Model Naming Rule Antenna Model Naming Example: A

OC

45

18

R

0

Notes for frequency characters:

v06

45: Single-band antennas (450-470 MHz) 70: Single-band antennas (690-960 MHz) 79: Single-band antennas (790-960 MHz) 19: Single-band antennas (1710-2200 MHz or 1710-2170 MHz) 26: Single-band antennas (1710-2690 MHz) DU: Dual-band antennas TR: Tri-band antennas QU: Quad-band antennas PE: Penta-band antennas SI: Six-band antennas HP: Hepta-band antennas OC: Octa-band antennas TD: TDD antennas MB: Multi-beam antennas

v06/v07: 4.3-10 connector v01/v02 version (optional) Different antenna in ascending order Antenna types R: RCU Integrated Number: MET or FET S: Cluster antenna Gain (the maximum gain of all the band) Polarization Frequency characters OC: Octa-band A: Antenna products C: Camouflage antennas

RCU Model Naming Example: A

RCU

020

04

v01

AIMM Model Naming Example: A

IMM

21

S

11

EB

v01 v01/v02 version (optional)

v01/v02 version (optional)

Functional character (optional) EB: Easy Beam

Different RCU in ascending order

00-- MET module 11-- AISG interface: 1 input 1 output 22-- AISG interface: 2 input 2 output

AISG version 011: AISG 1.1 020: AISG 2.0

AIMM types S: for single-band antenna D: for dual-band antenna M: for multi-band antenna

RCU

AISG version: 20 (AISG 2.0)/21 (AISG 2.1) IMM: Information management module

ALD products

TMA Model Naming Example: A

TA

26

20

00

v06

ALD products

Combiner Model Naming Example: A

v06: 4.3-10 connector v01/v02 version (optional) Different TMA in ascending order

AISG version 11: AISG 1.1 20: AISG 2.0 Frequency 26: 2600M TMA DU: Dual-band TMA TA: TMA

COM

D

2

H

11

v06 v06: 4.3-10 connector v01/v02 version (optional) Different combiner in ascending order DC bypass properties H: High-band DC bypass L: Low-band DC bypass A: All bands DC bypass (4.3-10 connector only) S: Auto-sense DC bypass N: Filter or No DC bypass 2: Dual unit Frequency character D: Dual-band combiner T: Triple-band combiner Q: Quad-band combiner COM: Combiner

ALD products

ALD products

AISG Colour Coding Antenna Port Colour Coding Colour coding is used to identify antenna RF ports and also for RET remote identification. Colour coding consists of five parts generally: colour code, pattern coding, array numbering, array symbol and RCU serial number. 14-Port EasyRET antenna is used as an example to illustrate colour coding:

1. Colour Code

2. Pattern Coding

(Used to distinguish different bands. For details, please see chapter 1.)

(Used to differentiate array ports carrying the same colour code. For details, please see chapter 2.)

3. Array Numbering (Used to mark different array ID and array positions. For details, please see chapter 3.)

4. Array Symbol (Used to display the physical structure of the antennas. For details, please see chapter 4.) Two types of array symbol are used (Type 1 and Type 2). Which type is used depends on specific antennas. This also applies to chapter 3 Array numbering and chapter 7 RCU serial number.

Type 1

Type 2 2 Low Bands Filtered r1: 690-862MHz r2: 880-960MHz r1 and r2 share the same low-band array

Lb1 Ly1

Cb2

r1

Rb3 Ry2

r2

5 high-band arrays Cb2: 1427-2200MHz Lb1, Rb3: 1695-2200MHz Ly1, Ry2: 2490-2690MHz Lb1 and Ly1 share the same high-band array Rb3 and Ry2 share the same high-band array

2 Low Bands Filtered r: 690-862MHz rr: 880-960MHz r and rr share the same low-band array bL yL

bbC bbbR yyR

r

rr

5 high-band arrays bbC: 1427-2200MHz bL, bbbR: 1695-2200MHz yL, yyR: 2490-2690MHz bL and yL share the same high-band array bbbR and yyR share the same high-band array

5. Integrated RCU Serial Number (Used to distinguish RCUs of different bands to support remote RCU identification. For details, please see chapter 5.)

Type 1: HWMxxx..........r1 HWMxxx..........r2 HWMxxx..........Lb1 HWMxxx..........Ly1

Type 2: HWMxxx..........Cb2 HWMxxx..........Rb3 HWMxxx..........Ry2

HWMxxx..........r HWMxxx..........rr HWMxxx..........bL HWMxxx..........yL

HWMxxx..........bbC HWMxxx..........bbbR HWMxxx..........yyR

AISG Colour Coding 1. Colour Code According to AISG, the upper band edge ranges of the antenna port are represented by red, green, blue, and yellow in sequence from the low band range to the high band range. The following table shows the definition of the frequency range and the associated colour code abbreviation. Upper Band Edge Range

Assigned Colour Code

Colour Code Abbreviation

380MHz to 1000MHz

RAL 3020

r

1001MHz to 1700MHz

RAL 6029

g

1701MHz to 2300MHz

RAL 5015

b

2301MHz to 3000MHz

RAL 1023

y

3001MHz to 5000MHz

RAL 4006

p

5001MHz to 6000MHz

RAL 2009

o

2. Pattern Coding Pattern coding is used to differentiate array ports carrying the same colour code. Two types of pattern coding are used (Type A and Type B). Which type is used depends on specific antennas. Type A: The number of dots is shown in the following figure. Note: The dot may be black or white.

y1

y2

y3

y4

y6

y5

Type B: Different segments of color and gaps are shown in the following figure. Note: Gaps between colored segments may be white gaps or black lines.

y1 (or y)

y2 (or yy)

y3 (or yyy)

y4 (or yyyy)

y5 (or yyyyy)

Multi-beam Coding: Note: the yellow color will related to corresponding port , Dual-beam

Tri-beam

4-beam

3. Array Numbering For multi-band antennas, different arrays are indicated by their colour code abbreviations, array IDs, as well as array positions. There are two types of array numbering. Array ID: e.g. “y1” or “y” for the first high-band array, ”y2” or ”yy” for the second high-band array.

AISG Colour Coding Array position is represented by abbreviation (e.g. L, C, R, T, M, and B), the following table shows the details. Array Horizontal Definition

Array Vertical Definition

Abbreviation

Full Name

Abbreviation

Full Name

L

Left Array

T

Top Array

C

Center Array

M

Middle Array

R

Right Array

B

Bottom Array

Take 14-port antenna for example, array with Ry2 or yyR means the second high-band array and located at right position inside of antenna.

4. Array Symbol In order to better display the physical structure of Huawei antennas, the array symbol corresponding to the array ID and array position is shown in the catalogue. The following figures show the physical structures of different antennas as examples:

Type 1

I. 4-Port Antenna 2 Filtered Low Bands ("Dipole reuse") e.g. 790-862/880-960 or 690-803/824-960 MHz

or

r1 r2

r

Type 1

III.4-Port Antenna 2 Side-by-side High-band Arrays e.g. 1710-2690/1710-2690 MHz

Ly1

Type 2

or

Ry2

Type 1

II. 4-Port Antenna 2 Filtered High Bands ("Dipole reuse") e.g. 1710-2170/2490-2690 MHz

rr

Type 2

yL

yyR

Type 2

b1 y1

Type 1 IV.6-Port Antenna 1 Low Band 2 Side-by-side High-band Arrays e.g. 790-960/1710-2690/17102690 or 690-960/17102690/1710-2690 MHz

or

Ly1

b

or

Ry2

y

Type 2

yL

yyR

r1

Type 1 V. 8-Port Antenna 1 Low Band 3 Side-by-side High-band Arrays e.g. 690-960/1710-2690/ 1710-2690/1710-2690 MHz

Ly1

Cy2

r1

or

Ry3

Type 1

Type 2

yL

yyC

r

yyyR

VI.10-Port Antenna 1 Low Band and 4 High-bands e.g. 690-960/1695-2690/ 1695-2690/1695-2690/ 1695-2690 MHz

r

or

Type 2

LTy1

RTy3

yLT

yyyRT

LBy2

RBy4

yyLB

yyyyRB

r1

r

AISG Colour Coding 5. RCU Serial Number The SN (serial number) of integrated RCU contains colour coding information, EasyRET antennas support remote RCU identification by colour coding. The SN of an integrated RCU contains 19 digits. The following describes a hexa-band EasyRET antenna's SN as an example: Note: This naming convention is the mainstream scene. If you have any questions, please contact us. Type 1:

H W M 2 4 3 0 G 9

0

0

1

0

0

2

1

R

y

2

Type 2:

H W M 2 4 3 0 G 9

0

0

1

0

0

2

1

y

y

R Color coding: Use the last or last several digits to show the band features and position of the antenna port. Fill other digits that are not used with a random code. Running number (random) Delivery month (9: september) Delivery year (G: the year of 2016) ITEM code of the antenna RET Type, M: integrated RCU Manufacturer code, fixed as HW

8 ports

6 ports - 1L2H 8 ports - 1L3H

B-5 3LnH

6 ports - 2L1H

12 ports - 2L4H

8 ports - 2L2H

14 ports - 2L5H

10 ports - 2L3H

16 ports - 2L6H

10 ports - 3L2H

16 ports - 3L5H

12 ports - 3L3H

Multi-beam

TDD Antenna Special Scene Antenna

C

Digital Antenna System

C - 1 RET System C - 2 Intelligent Management

D - 1 TMA

D

Antenna Line Product D - 2 Combiner

E

Bracket & Installation Guide

E - 1 Bracket E - 2 Installation Guide

Low Band 2-6 ports Multi-beam

B-4 2LnH

12 ports - 1L5H

FDD+TDD Antenna TDD 8T8R Antenna Small Antenna

TDD &Others

B

Passive Antenna

10 ports - 1L4H

Digital

Multi-band

H Band 2-8 ports

6 ports

4 ports

1LnH Band 4-12 ports

2 ports

2LnH Band 6-16 ports

4 ports

4 ports - 1L1H

B-3 1LnH

6 ports

TMA

B-2 High Band

2 ports

Combiner

B - 1 Low Band

3LnH Band 10-16 ports

ACS

Bracket & Installation Guide

A

Antenna with Cabinet Suite

ACS

L: Low Band, ≤960MHz; H: High Band, >960MHz 1LnH: means 1 Low Band and n High Bands, n: 1, 2, 3.....

Product Replacement List 1 Product in the catalogue 2018

Product in the catalogue 2019 ANT

ASI4518R11v06

ASI4518R41v06

AMB4520R0v06

AMB4520R8v06

EasyRETand MET Antenna Corresponding List EasyRET Antenna

MET Antenna (Corresponding to EasyRET)

Model

Model

A794515R0v06

A79451500v06

A794516R0v06

A79451600v06

A794517R0v06

A79451700v06

A194518R0v06

A19451811v06

A264518R0v06

A26451800v06

ADU4518R1v06

ADU451819v06

ADU4518R6v06

ADU451816v06

ATR4518R15v06

ATR451807v06

ATR4518R14v06

ATR451714v06

ADU4517R3v06

ADU451503v06

ADU4518R3v06

ADU451602v06

ADU4518R0v06

ADU451807v06

ATR4516R0v06

ATR451602v06

ATR4517R0v06

ATR451704v06

AMB4520R5v06

AMB452003v06

Index of Antenna and Antenna Line Product The products are listed in an alphabetical & numeric order. New or changed product. Model

Page

ACS

Model

Page

Model

Page

Model

Page

ADU4516R6v06

27

AMB4520R4v06

263

AQU…

ADU4517R0v06

35

AMB4520R5v06

250

AQU4517R4v06

143

ACSR240101

2

ADU4517R3v06

73

AMB4520R6v06

269

AQU4518R11v07

94

ACSR240203

3

ADU4517R6v06

29

AMB4520R8v06

252

AQU4518R14v07

91

MMIK000102

5

ADU4518R0v06

77

AMB4520R9v06

274

AQU4518R19v06

147

ADU4518R1v06

51

AMB4521R0v06

277

AQU4518R21v06

61

ADU4518R3v06

75

AQU4518R22v07

102

ADU4518R6v06

53

AOC…

AQU4518R23v06

137

ADU4518R7v06

69

AOC4518R0v06

242

AQU4518R24v06

139

ADU4518R8v06

71

AOC4518R3v06

221

AQU4518R25v06

141

ADU4518R9v06

67

AOC4518R4v06

215

AQU4518R27v06

99

ADU4521R0v06

55

AOC4518R5v06

218

AQU4518R30v07

145

AOC4518R7v06

212

AQU4518R36v06

136

AOC4518R8v06

293

AQU4518R37v06

135

AQU4518R9v06

Passive Antenna

A1… A194518R0v06

43

A2… A264518R0v06

45

A264521R1v06

47

AHP…

A264521R2v06

49

AHP4517R0v07

206 AOC4518R9v06

239

AHP4517R1v06

203 AOC4518R16v06

292

AHP4517R2v06

209

ASI… ASI4517R3v06

173

A7…

97

A704515R0v06

9

AHP4517R7v06

197 APE…

A704516R0v06

11

AHP4518R3v06

191 APE4516R1v06

110

ASI4518R10v06

175

A704517R0v06

13

AHP4518R4v06

194 APE4517R0v06

112

ASI4518R14v06

171

A704521R0v06

15

AHP4518R5v06

200 APE4518R12v06

161

ASI4518R18v06

236

A794515R0v06

17

APE4518R13v06

149

ASI4518R21v06

233

A794515R1v06

23

AMB…

APE4518R14v06

152

ASI4518R30v06

114

A794516R0v06

19

AMB4519R0v06

248 APE4518R17v06

158

ASI4518R31v06

167

A794517R0v06

21

AMB4519R13v06

282 APE4518R19v06

108

ASI4518R32v06

186

AMB4519R2v06

257 APE4518R20v06

163

ASI4518R36v06

170

AMB4519R3v06

266 APE4518R25v07

230

ASI4518R37v06

177

ADU450900v06

314 AMB4519R4v06

260 APE4518R30v06

155

ASI4518R39v06

180

ADU451200v06

316 AMB4519R5v06

279 APE4518R34v06

227

ASI4518R41v06

183

ADU4515R0v06

31

AMB4519R6v06

271 APE4518R37v06

105

ASI4518R42v06

291

ADU4515R5v06

25

AMB4519R9v06

285

ADU4516R0v06

33

AMB4520R2v06

254

ADU…

Model

Page

Model

Page

Model

Page

Model

Page

ASI4518R45v06

166 ATA262000v06

359 ACOMD2S05v06

383 ASBT…

ASI4518R4v06

189 ATA702000v06

344 ACOMQ2A01v06

434 ASBT00001

331

ATA802001v06

347 ACOMQ2M01v06

434 ASBT00001v06

334

ATA902007v06

350 ACOMT2A02v06

419 ASBT00002

331

ATD4516R5

300 ATADU2003v06

365 ACOMT2A03v06

425 ASBT00002v06

334

ATD4516R8

304 ATADU2005v06

371 ACOMT2A04v06

428

ATD4516R9

308 ATADU2015v06

374 ACOMT2A07v06

431 Bracket

ATADU2016v06

368 ACOMT2H01v06

422

ATADU2017v06

362 ACOMT2H03v06

422 ASM…

ATATR2002v06

377 ACOMT2H04v06

416 ASMC00001

441

ACOMT2H08v06

422 ASMC00002

441

ACOMT2M02v06

431 ASMC00003

441

ASMC00004

442

ASMC00005

442

407

ASMC00006

455

133 ACOMD2A06v06

404 AIMM…

ASMC00012

449

ATR4518R13v06

81

ACOMD2A07v06

386 AIMM20D11v01

325 ASMC00013

450

ATR4518R14v06

59

ACOMD2A08v06

410 AIMM20D22v01

326 ASMC00014

451

ATR4518R15v06

57

ACOMD2H00v06

398 AIMM20M11v01

327 ASMC00015

452

ATR4518R24v06

123 ACOMD2H11v06

392 AIMM20M22v01

328 ASMC00016

453

ATR4518R25v06

125 ACOMD2H19v06

395 AIMM20S11v01

324 ASMC00017

454

ATR4518R26v06

127 ACOMD2H22v06

398

ASMDT0A01

443

79

386 AISU…

ASMDT0B01

444

341 ASMDT0C01

445

ATD…

ATR… ATR4516R0v06

87

ATR4516R2v06

37

ATR4517R0v06

89

ATR4517R10v06

39

ATR4517R5v06 ATR4518R11v06 ATR4518R12v06

ATR4518R28v06 ATR4518R2v06 ATR4518R6v06

TMA

ATA…

Combiner

129 ACOM… 85

ACOMD2A00v06

ACOMD2H25v06

Digital Antenna System

131 ACOMD2H26v06

404 AISU00001v01

83

ACOMD2H27v06

410

ASMDT0D01

446

ACOMD2L08v06

389 APAA…

ASMDT0F01

448

ACOMD2L11v06

386 APAA00001

339 ASMDT0G01

447

ACOMD2L12v06

404

ACOMD2L13v06

410 AR…

ASMWM0001

ATA182003v06

353 ACOMD2S02v06

401 ARCU02004v01

323

ATA212007v06

356 ACOMD2S03v06

413 AREU01301

329

456

Index of Antenna Platform The products are listed platform order. New or changed product. Model

Page

ACS

Model

Page

Golden Pro

Model

Page

Pearl

Model

Page

Munich

ACSR240101

2

AQU4518R36v06

136 AHP4517R7v06

197 AOC4518R4v06

215

ACSR240203

3

AQU4518R37v06

135 AHP4518R3v06

191 AOC4518R7v06

212

MMIK000102

5

ASI4518R36v06

170 AHP4518R4v06

194 ASI4518R37v06

177

AOC4518R0v06

242 ASI4518R39v06

180

AOC4518R5v06

218

AOC4518R9v06

239 London

Golden

Diamond

ADU4515R5v06

25 AHP4517R0v07

206 APE4518R13v06

149

ADU4516R6v06

27 AHP4517R1v06

203 APE4518R14v06

152 ASI4518R42v06

290

ADU4517R6v06

29 AHP4517R2v06

209 APE4518R25v07

230 AOC4518R16v06

292

AQU4518R23v06

137 AOC4518R3v06

221 APE4518R30v06

155 AOC4518R8v06

293

AQU4518R24v06

139 APE4518R17v06

158 APE4518R34v06

227

AQU4518R25v06

141 APE4518R20v06

163 ASI4518R18v06

236 Bangkok

ASI4517R3v06

173 APE4518R37v06

105 ASI4518R21v06

233

ASI4518R10v06

175 AQU4518R14v07

91 ASI4518R31v06

167 AMB4519R13v06

ASI4518R14v06

171 AQU4518R22v07

102

ATR4516R2v06

37 AQU4518R27v06

99 Pearl Pro

ATR4517R10v06

39 ASI4518R30v06

114

ATR4518R24v06

123 ASI4518R32v06

186 AHP4517R7v06

ATR4518R25v06

125 ASI4518R41v06

183

ATR4518R26v06

127

282

AMB4519R5v06

279

AMB4519R6v06

271

AMB4519R9v06

285

197 AMB4520R9v06

274

Vancouver

ASI4518R45v06

166

ATR4518R28v06

79

ACS

A. Antenna with Cabinet Suite Model

Page

ACSR

**ACSR240101

2

ACSR

**ACSR240203

3

ACSM

**MMIK000102

5

** Preliminary Issue

ACS

ACSR (Antenna with Cabinet Suite for RRU)

Product Description ACSR(Antenna with Cabinet Suite for RRU) is an extensible antenna solution, which can be integrated with Huawei RRU to realize passive antenna and RRU in one box. ACSR helps operators to deploy sub 3GHz full 4T4R by one installation in one box to simply the site configuration and reduce TCO.

ACSR

RRU

ACSR Features Passive Antenna 

Based on advanced multi-band antennas with innovative antenna platforms (Golden Platform, Munich Platform etc.), providing future evolution capability and best performance.



Slim size



EasyRET 2.0

RRU Slot 

RRU Slot 1 Passive Antenna

Support Huawei multi-band RRU to reduce

RRU Slot 2

boxes. 

Compatible with Huawei 24L/18L/12L RRU.



Maximum 2 RRUs can be integrated with ACSR.

ACSR

1

DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-2690ACSR240101 65/65/65/65/65-15.5i/16i/18i/18i/18i-M/M/M/M/M-R AXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.0m 2690-65/65/65/65/65/65-14.5i/14.5i/17.5i/17.5i/17.5i/17.5iModel: APE4518R0 M/M/M/M/M/M-R EasyRET2L4H 12-Port Antenna with Integrated RCUs -1.5m

Preliminary Issue

Electrical Properties Frequency range (MHz) Electrical downtilt (°) Gain (dBi)

2 x (690 - 960)

2 x (1427 - 2690)

2 x (1695 - 2690)

0 - 14

2 - 12

2 - 12

14.3

17.5

17.5

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

16

16

16

Horizontal 3dB beam width (°)

66

65

63

Vertical 3dB beam width (°)

14

7

6

VSWR

< 1.5

Front to back ratio, copolar (dB)

Typ. 25

Cross polar ratio (dB)

Typ. 17

0°

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1509 x 469 x 360

Packing dimensions (H x W x D) (mm)

1800 x 650 x 620

Antenna net weight (kg)

55

Mechanical downtilt (°)

0-8

Connector

12 x 4.3-10 Female

RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

Antenna with Cabinet Suite Properties ACS Properties Case1: 1 RRU

Case2: 2 RRU

RRU supported in Upper positon

24L /18L /12L RRU

RRU supported in Lower positon

/

RRU supported in Upper positon

18L /12L RRU

RRU supported in Lower positon

18L /12L RRU

Notes: Only Huawei RRU supported. Contact technical support to get specific RRU type.

2

DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-2690ACSR240203 ACS

65/65/65/65/65-15.5i/16i/18i/18i/18i-M/M/M/M/M-R AXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695EasyRET Penta-Band Antenna with 5 Integrated RCUs - 2.0m 2690-65/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5iModel: APE4518R0 M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with Integrated RCUs - 2.0m

Preliminary Issue

Electrical Properties 2 x (690 - 960)

2 x (1695 - 2690) Top

2 x (1695 - 2690) Bottom

Electrical downtilt (°)

0 - 10

2 - 12

2 - 12

Gain (dBi)

15.7

16

16.5

15

15

15

Horizontal 3dB beam width (°)

65

65

65

Vertical 3dB beam width (°)

9.5

9

8

Frequency range (MHz)

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

VSWR

< 1.5

Front to back ratio, copolar (dB) Cross polar ratio (dB)

Typ. 25 0°

Typ. 17 ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 429 x 335

Packing dimensions (H x W x D) (mm)

2340 x 730 x 710

Antenna net weight (kg)

64

Mechanical downtilt (°)

0-8

Connector

12 x 4.3-10 Female

RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

Antenna with Cabinet Suite Properties ACS Properties Case1: 1 RRU

Case2: 2 RRU

RRU supported in Upper positon

24L /18L /12L RRU

RRU supported in Lower positon

/

RRU supported in Upper positon

24L /18L /12L RRU

RRU supported in Lower positon

24L /18L /12L RRU

Notes: Only Huawei RRU supported. Contact technical support to get specific RRU type.

3

ACSM (Antenna with Cabinet Suite for Massive MIMO)

Product Description ACSM which includes passive antenna and MMIK(Massive MIMO Mechanical Integration Kit) is a solution to integrate passive antenna and Massive MIMO. With ACSM, operators can deploy passive antenna and Massive MIMO on single pole as one box, or reserve space for future Massive MIMO deployment, to reduce site cost and shorten TTM.

Massive MIMO

ACSM

Install Massive MIMO

ACSM Features Passive Antenna 

Based on advanced multi-band antennas with

MMIK

Pearl Platform and Munich Platform, providing future evolution capability and best performance. 

Slim size with 469mm width.



EasyRET 2.0

MMIK (Massive MIMO Mechanical Integration Kit) 

Passive Antenna

Flip cover design for easy installation and maintenance of Massive MIMO.



4

Fit Huawei passive antennas with 469mm width.

ACSM

ACS

DXXXXX-790-862/880-960/1710-2690/1710-2170/2490-2690MMIK000102 65/65/65/65/65-15.5i/16i/18i/18i/18i-M/M/M/M/M-R MMIK (Massive MIMO Mechanical Integration Kit)RCUs - 999x469x206mm EasyRET Penta-Band Antenna with 5 Integrated - 2.0m Model: APE4518R0 Preliminary Issue Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Mounting kit

999 x 469 x 206 1130 x 720 x 450 Included

Net weight (kg)

12.5

Packaging weight(kg)

21.5

Mast diameter supported (mm)

50 - 115

Radome material

GFRPP

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

Wind load with back cover (N)

Frontal: 285(at 150 km/h) Lateral: 165(at 150 km/h) Maximum: 380(at 150 km/h)

Wind load with Massive MIMO installed and back cover removed (N)

Frontal: 285(at 150 km/h) Lateral: 165(at 150 km/h) Maximum: 530(at 150 km/h)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

5

L Band 2-6 ports

B. Passive Antenna Multi-band B - 1 Low Band

2 Ports Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width(o) Downtilt(o)

Dimension(mm)

Model

Page

Array symbol

690-960

65

15

0-14

EasyRET2.0 2 x 4.3-10

1415 x 298 x 149

A704515R0v06

9

A

690-960

65

16.5

0-12

EasyRET2.0 2 x 4.3-10

1936 x 298 x 149

A704516R0v06

11

A

690-960

65

17.5

0-10

EasyRET2.0 2 x 4.3-10

2535 x 298 x 149

A704517R0v06

13

A

690-960

33

20.5

0-10

EasyRET2.0 2 x 4.3-10

2580 x 590 x 169

A704521R0v06

15

A

790-960

65

15

0-14

EasyRET2.0 2 x 4.3-10

1356 x 259 x 135

A794515R0v06

17

A

790-960

65

16.5

0-12

EasyRET2.0 2 x 4.3-10

1936 x 259 x 135

A794516R0v06

19

A

790-960

65

17.5

0-10

EasyRET2.0 2 x 4.3-10

2535 x 259 x 135

A794517R0v06

21

A

790-960

90

15

0-12

EasyRET2.0 2 x 4.3-10

1936 x 259 x 135

A794515R1v06

23

A

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Downtilt (o) Range (MHz) Beam Width (o)

Dimension(mm)

Model

Page

Array symbol

1499 x 429 x 196

ADU4515R5v06

25

E

4 Ports

690-960/ 690-960

65/65

690-960/ 690-960

65/65

16/16

0-10/0-10 EasyRET2.0 4 x 4.3-10

1999 x 429 x 196

ADU4516R6v06

27

E

690-960/ 690-960

65/65

17/17

0-10/0-10 EasyRET2.0 4 x 4.3-10

2550 x 429 x 196

ADU4517R6v06

29

E

790-862/ 880-960

65/65

14.5/15

0-14/0-14 EasyRET2.0 4 x 4.3-10

1490 x 298 x 150

ADU4515R0v06

31

D

** Preliminary Issue

14.5/14.5 0-14/0-14 EasyRET2.0 4 x 4.3-10

Multi-band B - 1 Low Band

4 Ports Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

790-862/ 880-960

65/65

16/16.5

0-12/0-12 EasyRET2.0 4 x 4.3-10

1999 x 259 x 150

ADU4516R0v06

33

D

790-862/ 880-960

65/65

17/17.5

0-10/0-10 EasyRET2.0 4 x 4.3-10

2538 x 259 x 150

ADU4517R0v06

35

D

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

6 Ports

690-862/ 880-906/ 690-960 690-862/ 880-906/ 690-960

65/65/65

15/15.5/ 0-10/0-10/ EasyRET2.0 6 x 4.3-10 16 0-10

1999 x 429 x 196

ATR4516R2v06

37

EE

65/65/65

16.5/16.5/ 2-12/2-12/ EasyRET2.0 6 x 4.3-10 17 2-12

2550 x 429 x 196

ATR4517R10v06

39

EE

** Preliminary Issue

Array Symbol Type Type A

r

Type D

r

rr

2 Low-bands filtered

Type E

Lr1

Rr2

2 Low-bands array side-by-side

Type EE

Lr1 Lr2 Rr3

A704515R0v06 DX-690-960-65-15i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 1.4m L Band 2-6 ports

Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 14 , continuously adjustable

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

13.9

14.4

14.6

14.8

13.9 ±0.3

14.3 ±0.3

14.5 ±0.3

14.7 ±0.4

> 15

> 15

> 15

> 17

69 ±1.4

68 ±1.0

67 ±1.0

65 ±2.0

16.4 ±1.0

15.0 ±1.0

14.5 ±0.7

13.2 ±0.9

> 25

> 25

> 25

> 17

> 17

> 17

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Front to back ratio , ±30° (dB)

> 24

Cross polar ratio (dB)

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1415 x 298 x 149

Packing dimensions (H x W x D) (mm)

1835 x 360 x 225

Antenna weight (kg)

12.3

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

106

21.3 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 435 (at 150 km/h) Lateral: 195 (at 150 km/h) Maximum: 580 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1415

Radome material

1280

Mast diameter supported (mm)

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16 °

1.3 kg

1 (Separate packing)

9

A704515R0v06 DX-690-960-65-15i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r - Red

Pattern sample for reference

690 - 960 MHz

10

r

A704516R0v06 DX-690-960-65-16.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m L Band 2-6 ports

Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.5

15.9

16.1

16.4

15.4 ±0.3

15.7 ±0.4

15.9 ±0.5

16.1 ±0.5

> 15

> 15

> 15

> 15

69 ±1.0

68 ±1.2

67 ±1.2

65 ±1.8

11.3 ±0.8

10.3 ±0.5

9.8 ±0.6

9.2 ±0.5

VSWR

< 1.5 ≥ 30

Cross polar isolation (dB) Front to back ratio , ±30° (dB)

> 24

> 25

> 25

> 25

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1936 x 298 x 149

Packing dimensions (H x W x D) (mm)

2365 x 360 x 230

Antenna weight (kg)

15.3

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

25.8 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 620 (at 150 km/h) Lateral: 280 (at 150 km/h) Maximum: 830 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1300

50 - 115

1936

Mast diameter supported (mm)

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

11

A704516R0v06 DX-690-960-65-16.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r - Red

Pattern sample for reference

690 - 960 MHz 12

r

A704517R0v06 DX-690-960-65-17.5i-M-R EasyRET Low-Band 2- Port Antenna with 1 Integrated RCU - 2.6m L Band 2-6 ports

Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable

at mid Tilt

16.5

16.7

17.0

17.2

16.4 ±0.3

16.6 ±0.4

16.7 ±0.4

16.9 ±0.5

> 17

> 18

> 18

> 17

Horizontal 3dB beam width (°)

69 ±1.0

68 ±1.2

67 ±1.2

65 ±2.0

Vertical 3dB beam width (°)

8.7 ±0.6

8.0 ±0.5

7.7 ±0.4

7.2 ±0.5

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Front to back ratio , ±30° (dB)

> 25

> 26

> 26

> 26

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

2535 x 298 x 149

Packing dimensions (H x W x D) (mm)

2885 x 365 x 235

Antenna weight (kg)

19.3

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

32.3 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1874

Radome material

Frontal: 845 (at 150 km/h) Lateral: 380 (at 150 km/h) Maximum: 1130 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2535

Mast diameter supported (mm)

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0-8°

2.1 kg

1 (Separate packing)

13

A704517R0v06 DX-690-960-65-17.5i-M-R EasyRET Low-Band 2- Port Antenna with 1 Integrated RCU - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r - Red

Pattern sample for reference

690 - 960 MHz

14

r

A704521R0v06 DX-690-960-33-20.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.6m L Band 2-6 ports

Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable

at mid Tilt

19.1

19.7

20.0

20.3

19.0 ±0.5

19.6 ±0.4

19.9 ±0.5

20.2 ±0.3

Side lobe suppression for first side lobe above main beam (dB)

> 19

> 21

> 21

> 19

Azimuth side lobe suppression(dB)

> 18

> 18

> 19

> 19

Horizontal 3dB beam width (°)

35 ±1.5

32.5 ±1.0

31.5 ±1.5

29 ±1.0

Vertical 3dB beam width (°)

8.8 ±0.5

8.0 ±0.5

7.7 ±0.3

7.2 ±0.5

Gain (dBi)

over all Tilts

VSWR

< 1.5 ≥ 28

Cross polar isolation (dB)

≥ 30

Front to back ratio , ±30°(dB)

> 32

> 35

> 33

> 32

Cross polar ratio (dB)

> 21

> 28

> 26

> 24

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2580 x 590 x 169

Packing dimensions (H x W x D) (mm)

2875 x 740 x 300

Antenna weight (kg)

44.8

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

64.2 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

2580

Mast diameter supported (mm)

1888

144

Frontal: 1665 (at 150 km/h) Lateral: 240 (at 150 km/h) Maximum: 1665 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0-8°

3.1 kg

1 (Separate packing)

15

A704521R0v06 DX-690-960-33-20.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r - Red

Pattern sample for reference

690 - 960 MHz

16

r

A794515R0v06 DX-790-960-65-15i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 1.4m L Band 2-6 ports

Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

824 - 894

Polarization

+45° , -45°

Electrical downtilt (°) Gain (dBi)

880 - 960

0 - 14 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

14.6

14.8

15.1

14.5 ±0.3

14.8 ±0.3

15.1 ±0.4

> 18

> 18

> 17

68 ±1.4

67 ±1.6

65 ±2.3

16.0 ±0.8

15.3 ±0.7

14.5 ±0.8

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Front to back ratio , ±30°(dB)

> 25

Cross polar ratio (dB)

> 25

0°

Max. power per input (W)

> 24

> 24

> 25

> 25

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1356 x 259 x 135

Packing dimensions (H x W x D) (mm)

1635 x 300 x 190

Antenna weight (kg)

10.6

Clamps weight (kg)

2.9 (2 units) 17.1 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1356

Mast diameter supported (mm)

1260

Antenna packing weight (kg)

-40 .. +65 Frontal: 360 (at 150 km/h) Lateral: 165 (at 150 km/h) Maximum: 485 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16 °

1.3 kg

1 (Separate packing)

17

A794515R0v06 DX-790-960-65-15i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r - Red

Pattern sample for reference

790 - 960 MHz

18

r

A794516R0v06 DX-790-960-65-16.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m L Band 2-6 ports

Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

824 - 894

Polarization

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable

at mid Tilt

16.3

16.5

16.8

16.2 ±0.4

16.4 ±0.4

16.6 ±0.4

Side lobe suppression for first side lobe above main beam (dB)

> 17

> 17

> 18

Horizontal 3dB beam width (°)

69 ±1.2

68 ±1.8

65 ±2.6

10.1 ±0.6

9.8 ±0.5

9.2 ±0.5

Gain (dBi)

over all Tilts

Vertical 3dB beam width (°) VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Front to back ratio , ±30° (dB)

> 25

> 25

> 25

Cross polar ratio (dB)

> 25

> 25

> 25

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1936 x 259 x 135

Packing dimensions (H x W x D) (mm)

2255 x 305 x 190

Antenna weight (kg)

13.3

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

22.4 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1285

50 - 115

1936

Mast diameter supported (mm)

Frontal: 545 (at 150 km/h) Lateral: 250 (at 150 km/h) Maximum: 730 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

19

A794516R0v06 DX-790-960-65-16.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r - Red

Pattern sample for reference

790 - 960 MHz

20

r

A794517R0v06 DX-790-960-65-17.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.6m L Band 2-6 ports

Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

824 - 894

Polarization

+45° , -45°

Electrical downtilt (°) Gain (dBi)

880 - 960

0 - 10 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

17.1

17.3

17.6

16.9 ±0.4

17.1 ±0.3

17.4 ±0.5

> 18

> 18

> 19

Horizontal 3dB beam width (°)

69 ±1.2

68 ±1.3

65 ±3.0

Vertical 3dB beam width (°)

8.3 ±0.5

7.9 ±0.5

7.3 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Front to back ratio , ±30° (dB)

> 26

Cross polar ratio (dB)

> 25

0°

Max. power per input (W)

> 26

> 26

> 25

> 25

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2535 x 259 x 135

Packing dimensions (H x W x D) (mm)

2810 x 300 x 190

Antenna weight (kg)

16.3

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

25.8 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1735

50 - 115

2535

Mast diameter supported (mm)

Frontal: 740 (at 150 km/h) Lateral: 335 (at 150 km/h) Maximum: 995 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0-8°

2.1 kg

1 (Separate packing)

21

A794517R0v06 DX-790-960-65-17.5i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r - Red

Pattern sample for reference

790 - 960 MHz

22

r

A794515R1v06 DX-790-960-90-15i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m L Band 2-6 ports

Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

824 - 894

Polarization

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable

at mid Tilt

15.0

15.2

15.3

14.8 ±0.3

15.0 ±0.3

15.0 ±0.4

Side lobe suppression for first side lobe above main beam (dB)

> 18

> 18

> 18

Horizontal 3dB beam width (°)

86 ±1.0

85 ±1.0

85 ±1.5

10.0 ±0.4

9.8 ±0.4

9.3 ±0.3

Gain (dBi)

over all Tilts

Vertical 3dB beam width (°) VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Front to back ratio , ±30°(dB)

> 24

> 24

> 24

Cross polar ratio (dB)

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1936 x 259 x 135

Packing dimensions (H x W x D) (mm)

2255 x 305 x 190

Antenna weight (kg)

13.5

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

22.4 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1936

Radome material

1285

Mast diameter supported (mm)

Frontal: 545 (at 150 km/h) Lateral: 250 (at 150 km/h) Maximum: 730 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

23

A794515R1v06 DX-790-960-90-15i-M-R EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r r

r - Red

Pattern sample for reference

790 - 960 MHz 24

ADU4515R5v06 DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m L Band 2-6 ports

Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 14 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

13.8

14.2

14.4

14.5

13.7 ±0.5

14.1 ±0.5

14.3 ±0.5

14.4 ±0.5

> 15

> 17

> 17

> 16

66 ±5

63 ±5

62 ±5

60 ±5

15.3 ±1.2

14.0 ±1.1

13.3 ±1.0

12.2 ±0.8

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 25

Cross polar ratio (dB)

> 16

> 18

> 19

> 20

0°

Max. power per input (W)

400 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Antenna dimensions (H x W x D) (mm)

1499 x 429 x 196

Packing dimensions (H x W x D) (mm)

1695 x 530 x 270

Antenna weight (kg)

22.4

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

33.8 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1310 1499

Mechanical Properties

-40 .. +65 Frontal: 410 (at 150 km/h) Lateral: 245 (at 150 km/h) Maximum: 540 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

25

ADU4515R5v06 DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr1 HWMxxx……Rr2 r - Red L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

26

Lr1

Rr2

ADU4516R6v06 DXX-690-960/690-960-65/65-16i/16i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m L Band 2-6 ports

Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.0

15.5

15.8

16.0

14.8 ±0.5

15.3 ±0.5

15.6 ±0.5

15.8 ±0.5

> 16

> 17

> 17

> 17

68 ±5

65 ±5

62 ±5

60 ±5

10.5 ±0.9

9.5 ±0.8

9.2 ±0.7

8.5 ±0.7

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 24

> 25

> 26

Cross polar ratio (dB)

> 17

> 18

> 19

> 20

0°

Max. power per input (W)

400 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 429 x 196

Packing dimensions (H x W x D) (mm)

2195 x 530 x 270

Antenna weight (kg)

28.2

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

41.9 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1273

50 - 115

Radome material

Frontal: 555 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 735 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

1999

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

27

ADU4516R6v06 DXX-690-960/690-960-65/65-16i/16i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr1 HWMxxx……Rr2 r - Red L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

28

Lr1

Rr2

ADU4517R6v06 DXX-690-960/690-960-65/65-17i/17i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m L Band 2-6 ports

Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.8

16.4

16.7

17.2

15.5 ±0.5

16.2 ±0.5

16.4 ±0.5

16.9 ±0.5

> 16

> 17

> 17

> 17

68 ±5

65 ±5

62 ±5

60 ±5

8.8 ±0.7

8.0 ±0.6

7.8 ±0.5

7.5 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 24

> 25

> 26

Cross polar ratio (dB)

> 17

> 18

> 19

> 20

0°

Max. power per input (W)

400 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2550 x 429 x 196

Packing dimensions (H x W x D) (mm)

2770 x 530 x 275

Antenna weight (kg)

33.4 55.0 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1787

5.8 (2 units)

Antenna packing weight (kg)

2550

Clamps weight (kg)

Frontal: 735 (at 150 km/h) Lateral: 450 (at 150 km/h) Maximum: 965 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

29

ADU4517R6v06 DXX-690-960/690-960-65/65-17i/17i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr1 HWMxxx……Rr2 r - Red L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

30

Lr1

Rr2

ADU4515R0v06 DXX-790-862/880-960-65/65-14.5i/15i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m L Band 2-6 ports

Antenna Specifications Electrical Properties Frequency range (MHz)

790 - 862

880 - 960

Polarization

+45° , -45°

Electrical downtilt (°)

0 - 14 , continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

over all Tilts

14.3

14.8

14.2 ±0.3

14.7 ±0.3

> 17

> 17

65 ±2.0

61 ±2.0

13.5 ±0.8

12.1 ±0.8

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR

< 1.5 ≥ 30

Cross polar isolation (dB)

≥ 30 ≥ 30

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 24

> 23

Cross polar ratio (dB)

> 25

> 23

0°

Max. power per input (W)

400 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1490 x 298 x 150

Packing dimensions (H x W x D) (mm)

1835 x 360 x 225

Antenna weight (kg)

17.7

Clamps weight (kg)

3.0 (2 units)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1389

27.2 (Included clamps)

1490

Antenna packing weight (kg)

Frontal: 460 (at 150 km/h) Lateral: 205 (at 150 km/h) Maximum: 615 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

31

ADU4515R0v06 DXX-790-862/880-960-65/65-14.5i/15i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r HWMxxx…..rr r - Red

Pattern sample for reference

790 - 862 MHz

32

880 - 960 MHz

r

rr

ADU4516R0v06 DXX-790-862/880-960-65/65-16i/16.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m L Band 2-6 ports

Antenna Specifications Electrical Properties Frequency range (MHz)

790 - 862

880 - 960

Polarization

+45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.8

16.3

15.6 ±0.3

16.0 ±0.3

> 17

> 17

68 ±2.0

65 ±2.0

10.5 ±0.5

9.4 ±0.5

VSWR

< 1.5 ≥ 30

Cross polar isolation (dB)

≥30 ≥ 30

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 24

Cross polar ratio (dB)

> 25

0°

> 24 > 26

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 259 x 150

Packing dimensions (H x W x D) (mm)

2290 x 305 x 205

Antenna weight (kg)

21.4

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

29.7 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1887

50 - 115

1999

Mast diameter supported (mm)

Frontal: 565 (at 150 km/h) Lateral: 290 (at 150 km/h) Maximum: 760 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

33

ADU4516R0v06 DXX-790-862/880-960-65/65-16i/16.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r HWMxxx…..rr r - Red

Pattern sample for reference

790 - 862 MHz

34

880 - 960 MHz

r

rr

ADU4517R0v06 DXX-790-862/880-960-65/65-17i/17.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m L Band 2-6 ports

Antenna Specifications Electrical Properties Frequency range (MHz)

790 - 862

880 - 960

Polarization

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

over all Tilts

16.8

17.3

16.5 ±0.4

17.1 ±0.5

> 18

> 18

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)

68 ±2.0

65 ±2.0

Vertical 3dB beam width (°)

8.3 ±0.6

7.2 ±0.6

VSWR

< 1.5 ≥ 30

Cross polar isolation (dB)

≥ 30 ≥ 30

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 25

> 25

Cross polar ratio (dB)

> 25

> 25

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2538 x 259 x 150

Packing dimensions (H x W x D) (mm)

2960 x 305 x 205

Antenna weight (kg)

25.2

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

36.5 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1887

50 - 115

2538

Mast diameter supported (mm)

Frontal: 740 (at 150 km/h) Lateral: 380 (at 150 km/h) Maximum: 1000 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 8°

2.1 kg

1 (Separate packing)

35

ADU4517R0v06 DXX-790-862/880-960-65/65-17i/17.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r HWMxxx…..rr r - Red

Pattern sample for reference

790 - 862 MHz

36

880 - 960 MHz

r

rr

ATR4516R2v06 DXXX-690-862/880-960/690-960-65/65/65-15i/15.5i/16i-M/M/M-R EasyRET 3L 6-Port Antenna with 3 Integrated RCUs - 2.0m

Electrical Properties 690 - 862 (Lr1)

Frequency range (MHz)

690 - 803

Polarization

690 - 960 (Rr3)

880 - 960 (Lr2)

790 - 862

690 - 803

790 - 862

+45° , -45°

Electrical downtilt (°)

880 - 960

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt Gain (dBi)

824 - 894

over all Tilts

14.2

14.7

15.3

14.5

15

15.3

15.6

14.1 ±0.5

14.5 ±0.6

15.1 ±0.5

14.3 ±0.5

14.8 ±0.5

15.1 ±0.5

15.4 ±0.5

> 15

> 15

> 15

> 15

> 15

> 15

> 15

66 ±7

61 ±6

58 ±6

66 ±7

61 ±6

60 ±6

58 ±6

11 ±1.1

9.9 ±0.9

8.8 ±0.8

10.5 ±1

9.5 ±0.9

9.2 ±0.9

8.5 ±0.8

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 21

> 22

> 24

> 21

> 22

> 22

> 24

Cross polar ratio (dB)

> 15

> 16

> 18

> 15

> 16

> 17

> 18

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)*

500 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1999 x 429 x 196

Packing dimensions (H x W x D) (mm)

2195 x 530 x 270

Antenna weight (kg)

30.3

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

41.3 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1273 1999

Mast diameter supported (mm)

-40 .. +65 Frontal: 555 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 735 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12°

2.1 kg

1 (Separate packing)

37

L Band 2-6 ports

Antenna Specifications

ATR4516R2v06 DXXX-690-862/880-960/690-960-65/65/65-15i/15.5i/16i-M/M/M-R EasyRET 3L 6-Port Antenna with 3 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr2 HWMxxx……Lr1 HWMxxx…...Rr3 r - Red L - Left array

R - Right array

Pattern sample for reference

690 - 862 MHz

38

880 - 960 MHz

690 - 960 MHz

ATR4517R10v06 DXXX-690-862/880-960/690-960-65/65/65-16i/16.5i/17i-M/M/M-R EasyRET 3L 6-Port Antenna with 3 Integrated RCUs - 2.6m L Band 2-6 ports

Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

Polarization

690 - 960

880 - 960

790 - 862

690 - 803

790 - 862

+45° , -45°

Electrical downtilt (°)

880 - 960

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt Gain (dBi)

824 - 894

over all Tilts

15.2

15.8

16.4

15.4

16.1

16.3

16.7

15.1 ±0.5

15.7 ±0.6

16.2 ±0.5

15.3 ±0.6

16.0 ±0.6

16.2 ±0.5

16.5 ±0.5

> 15

> 15

> 17

> 15

> 16

> 16

> 17

68 ±6

62 ±5

58 ±5

68 ±6

62 ±5

60 ±5

58 ±5

8.2 ±0.6

7.4 ±0.5

6.5 ±0.4

8.5 ±0.7

7.7 ±0.6

7.4 ±0.6

7.0 ±0.5

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 23

> 25

> 22

> 23

> 24

> 25

Cross polar ratio (dB)

> 16

> 20

> 20

> 16

> 19

> 20

> 20

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)*

500 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 429 x 196

Packing dimensions (H x W x D) (mm)

2980 x 530 x 275

Antenna weight (kg)

38.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

106

59.0 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 805 (at 150 km/h) Lateral: 495 (at 150 km/h) Maximum: 1060 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1787 2769

Mast diameter supported (mm)

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

39

ATR4517R10v06 DXXX-690-862/880-960/690-960-65/65/65-16i/16.5i/17i-M/M/M-R EasyRET 3L 6-Port Antenna with 3 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr2 HWMxxx……Lr1 HWMxxx…...Rr3 r - Red L - Left array

R - Right array

Pattern sample for reference

690 - 862 MHz

40

880 - 960 MHz

690 - 960 MHz

Multi-band

2 Ports Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

1710-2200

65

18

0-10

EasyRET2.0 2 x 4.3-10

1365 x 155 x 89

A194518R0v06

43

B

1710-2690

65

18

0-12

EasyRET2.0 2 x 4.3-10

1365 x 155 x 89

A264518R0v06

45

C

1695-2690

65

21

0-6

EasyRET2.0 2 x 4.3-10

2099 x 155 x 89

A264521R1v06

47

C

1695-2690

33

21

2-12

EasyRET2.0 2 x 4.3-10

1365 x 299 x 109

A264521R2v06

49

C

Frequency 3dB Horizontal Electrical Tilt Method Connector Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

1710-2200/ 1710-2200

65/65

18/18

0-10/0-10 EasyRET2.0 4 x 4.3-10

1365 x 269 x 86

ADU4518R1v06

51

H

1710-2690/ 1710-2690

65/65

18/18

0-12/0-12 EasyRET2.0 4 x 4.3-10

1365 x 269 x 86

ADU4518R6v06

53

I

1695-2690/ 1695-2690

65/65

21/21

EasyRET2.0 4 x 4.3-10

2099 x 269 x 86

ADU4521R0v06

55

I

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Downtilt (o) Range (MHz) Beam Width (o)

Dimension(mm)

Model

Page

Array symbol

1710-2200/ 1710-2200/ 1710-2200

65/65/65

18/18/18

0-10/0-10/ EasyRET2.0 6 x 4.3-10 0-10

1365 x 376 x 99

ATR4518R15v06

57

O

1710-2690/ 1710-2690/ 1710-2690

65/65/65

18/18/18

0-12/0-12/ EasyRET2.0 6 x 4.3-10 0-12

1365 x 376 x 99

ATR4518R14v06

59

P

4 Ports

0-6/0-6

6 Ports

** Preliminary Issue

High Band 2-8 Ports

B - 2 High Band

Multi-band B - 2 High Band

8 Ports Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Downtilt (o) Range (MHz) Beam Width (o)

Dimension(mm)

Model

Page

Array symbol

1710-2690/ 1710-2690/ 1710-2690/ 1710-2690

1499 x 449 x 115

AQU4518R21v06

61

VV

65/65/65/65

18/18/ 18/18

0-12/0-12/ EasyRET2.0 8 x 4.3-10 0-12/0-12

** Preliminary Issue

Array Symbol Type Type B

Type C

b

y

Type H

Type I

bL

yL

bbR

2 High-bands array side-by-side

yyR

2 High-bands array side-by-side

Type O

bL

bbC

bbbR

Type P

yL

yyC

Type Q

yyyR

bL yL

yyR

Type V

bL yL bbR yyR

Type VV

yL

yyCL

yyyCR yyyyR

A194518R0v06 DX-1710-2200-65-18i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Antenna Specifications Electrical Properties 1710 - 2200 1710 - 1880

1850 - 1990

1920 - 2170

Polarization

2170 - 2200

High Band 2-8 Ports

Frequency range (MHz)

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable

at mid Tilt

17.4

17.8

18.0

17.9

17.2 ±0.4

17.6 ±0.4

17.7 ±0.4

17.8 ±0.4

> 19

> 19

> 18

> 17

Horizontal 3dB beam width (°)

68 ±1.5

67 ±1.5

66 ±2

63 ±2

Vertical 3dB beam width (°)

7.4 ±0.4

6.9 ±0.4

6.5 ±0.4

6.0 ±0.3

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5 ≥ 30

Cross polar isolation (dB) Front to back ratio, ±30° (dB)

> 28

> 28

> 27

> 27

Cross polar ratio (dB)

> 22

> 22

> 22

> 18

0°

Max. power per input (W)

300 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1365 x 155 x 89

Packing dimensions (H x W x D) (mm)

1695 x 195 x 155

Antenna weight (kg)

64

6.2

Clamps weight (kg)

2.0 (2 units)

Antenna packing weight (kg)

10.7 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 220 (at 150 km/h) Lateral: 110 (at 150 km/h) Maximum: 290 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1392

38 - 115

1365

Mast diameter supported (mm)

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

Model

Description

ASMDT0A01 Mechanical downtilt: 0 - 12 °

Weight

Units per antenna

0.6 kg

1 (Separate packing)

43

A194518R0v06 DX-1710-2200-65-18i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...b b - Blue

Pattern sample for reference

1710 - 2200 MHz

44

b

A264518R0v06 DX-1710-2690-65-18i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Antenna Specifications Electrical Properties 1710 - 2690

Frequency range (MHz)

1710 - 1990

1920 - 2200

2200 - 2490 +45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable

at mid Tilt

17.4

18.0

18.5

18.6

17.2 ±0.3

17.6 ±0.5

18.3 ±0.4

18.4 ±0.4

> 18

> 18

> 18

> 18

Horizontal 3dB beam width (°)

68 ±2.0

65 ±2.4

62 ±2.7

60 ±1.5

Vertical 3dB beam width (°)

6.8 ±0.4

6.1 ±0.4

5.5 ±0.4

5.0 ±0.3

Gain (dBi)

High Band 2-8 Ports

Polarization

2490 - 2690

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5 ≥ 30

Cross polar isolation (dB) Front to back ratio, ±30° (dB)

> 28

> 29

> 29

> 29

Cross polar ratio (dB)

> 20

> 20

> 20

> 20

0°

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1365 x 155 x 89

Packing dimensions (H x W x D) (mm)

1695 x 195 x 155

Antenna weight (kg)

64

7.0

Clamps weight (kg)

2.0 (2 units)

Antenna packing weight (kg)

11.5 (included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1392

38 - 115

1365

Mast diameter supported (mm)

Frontal: 220 (at 150 km/h) Lateral: 110 (at 150 km/h) Maximum: 290 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0A01

Mechanical downtilt: 0 - 12 °

0.6 kg

1 (Separate packing)

45

A264518R0v06 DX-1710-2690-65-18i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...y y - Yellow

Pattern sample for reference

1710 - 2690 MHz

46

y

A264521R1v06 DX-1695-2690-65-21i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 2.0m Antenna Specifications Electrical Properties 1695 - 2690

Frequency range (MHz)

1695 - 1990

1920 - 2200

2200 - 2490 +45° , -45°

Electrical downtilt (°)

0 - 6 , continuously adjustable

at mid Tilt

Gain (dBi)

High Band 2-8 Ports

Polarization

2490 - 2690

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

19.8

20.3

20.7

21.0

19.8 ±0.5

20.3 ±0.5

20.7 ±0.5

21.0 ±0.5

> 18

> 17

> 17

> 17

68 ±4

65 ±3

61 ±2

59 ±4

4.4 ±0.4

4.0 ±0.4

3.5 ±0.2

3.3 ±0.3

> 27

> 27

> 27

> 20

> 20

> 20

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 27

Cross polar ratio (dB)

> 20

0°

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2099 x 155 x 89

Packing dimensions (H x W x D) (mm)

2515 x 210 x 170

Antenna weight (kg)

106

9.8

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

16.8 (Included clamps)

Mast diameter supported (mm)

50 -115

Radome material

Fiberglass

Radome colour

Light grey -40 .. +65

2130

Operational temperature (℃)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1310

Wind load (N)

2099

Frontal: 360 (at 150 km/h) Lateral: 180 (at 150 km/h) Maximum: 475 (at 150 km/h)

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 12 °

1.3 kg

1 (Separate packing)

47

A264521R1v06 DX-1695-2690-65-21i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……y1 y - Yellow

Pattern sample for reference

1695 - 2690 MHz

48

y

A264521R2v06 DX-1695-2690-33-21i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Antenna Specifications Electrical Properties 1695 - 2690

Frequency range (MHz)

1695 - 1990

1920 - 2200

2490 - 2690

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable

at mid Tilt

19.5

19.8

19.9

20.0

19.4 ±0.5

19.7 ±0.4

19.8 ±0.4

19.9 ±0.5

> 17

> 17

> 16

> 16

Horizontal 3dB beam width (°)

36 ±2.0

34 ±1.5

32 ±1.5

30 ±1.5

Vertical 3dB beam width (°)

7.1 ±0.5

6.5 ±0.5

5.5 ±0.4

5.1 ±0.4

Gain (dBi)

High Band 2-8 Ports

Polarization

2200 - 2490

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 29

> 32

> 33

> 33

Cross polar ratio (dB)

> 21

> 21

> 20

> 24

0°

Max. power per input (W)

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1365 x 299 x 109

Packing dimensions (H x W x D) (mm)

1660 x 347 x 180

Antenna weight (kg)

13.4

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

106

21.3 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1365

50 - 115 1251

Mast diameter supported (mm)

-40 .. +65 Frontal: 385 (at 150 km/h) Lateral: 130 (at 150 km/h) Maximum: 440 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16°

1.3 kg

1 (Separate packing)

49

A264521R2v06 DX-1695-2690-33-21i-M-R EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……y1 y - Yellow

Pattern sample for reference

1695 - 2690 MHz

50

y

ADU4518R1v06 DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (1710 - 2200)

Frequency range (MHz)

1710 - 1880

1850 - 1990

2170 - 2200

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable, each band separately at mid Tilt

Gain (dBi)

High Band 2-8 Ports

Polarization

1920 - 2170

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.6

18.0

18.2

18.1

17.5 ±0.5

17.8 ±0.4

18.0 ±0.4

17.9 ±0.4

> 20

> 18

> 18

> 17

67 ±3

66 ±3

64 ±5

61 ±4

7.4 ±0.4

6.9 ±0.4

6.5 ±0.6

6.0 ±0.3

VSWR

< 1.5 ≥ 30

Cross polar isolation (dB)

≥ 30 (1710 - 2200 // 1710 - 2200 MHz)

Interband isolation (dB) Front to back ratio, ±30°(dB)

> 27

> 27

> 26

> 26

Cross polar ratio (dB)

> 22

> 22

> 21

> 18

0°

Max. power per input (W)

300 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1365 x 269 x 86

Packing dimensions (H x W x D) (mm)

1680 x 340 x 155

Antenna weight (kg)

10.6

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

106

17.6 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 340 (at 150 km/h) Lateral: 105 (at 150 km/h) Maximum: 395 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1365

Radome material

1274

Mast diameter supported (mm)

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

Model

Description

Weight

Units per antenna

ASMDT0B01

Mechanical downtilt: 0 - 16 °

1.3 kg

1 (Separate packing)

51

ADU4518R1v06 DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

Lightning protection (kA)

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……..bL HWMxxx…...bbR L - Left array R - Right array

Pattern sample for reference

1710 - 2200 MHz (Left)

52

1710 - 2200 MHz (Right)

bL

bbR

ADU4518R6v06 DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (1710 - 2690)

Frequency range (MHz)

1710 - 1990

1920 - 2200

2490 - 2690

+45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable, each band separately

at mid Tilt

17.4

17.9

18.2

18.4

17.3 ±0.3

17.7 ±0.4

18.0 ±0.3

18.2 ±0.4

> 18

> 18

> 18

> 18

Horizontal 3dB beam width (°)

66 ±2.7

65 ±2.7

63 ±2.8

61 ±2.6

Vertical 3dB beam width (°)

6.9 ±0.3

6.3 ±0.3

5.5 ±0.3

5.0 ±0.3

Gain (dBi)

High Band 2-8 Ports

Polarization

2200 - 2490

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30 ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 27

> 27

> 27

> 27

Cross polar ratio (dB)

> 20

> 20

> 20

> 20

0°

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1365 x 269 x 86

Packing dimensions (H x W x D) (mm)

1680 x 340 x 155

Antenna weight (kg)

11.8

Clamps weight (kg)

2.9 (2 units) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1274

18.8 (included clamps)

Mast diameter supported (mm)

1365

Antenna packing weight (kg)

Frontal: 340 (at 150 km/h) Lateral: 105 (at 150 km/h) Maximum: 395 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16 °

1.3 kg

1 (Separate packing)

53

ADU4518R6v06 DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

Lightning protection (kA)

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……..yL HWMxxx……yyR yL

y - Yellow L - Left array R - Right array

Pattern sample for reference

1710 - 2690 MHz (Left)

54

1710 - 2690 MHz (Right)

yyR

ADU4521R0v06 DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

2200 - 2490 +45° , -45°

Electrical downtilt (°)

0 - 6 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

High Band 2-8 Ports

Polarization

2490 - 2690

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

20.0

20.5

20.7

21.0

20.0 ±0.5

20.5 ±0.5

20.7 ±0.5

21.0 ±0.5

> 18

> 17

> 17

> 16

65 ±4

62 ±3

60 ±3

58 ±5

4.4 ±0.4

4.0 ±0.4

3.5 ±0.2

3.3 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 26

> 26

> 26

> 26

Cross polar ratio (dB)

> 20

> 20

> 20

> 20

0°

Max. power per input (W)

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2099 x 269 x 86

Packing dimensions (H x W x D) (mm)

2415 x 340 x 160

Antenna weight (kg)

16.2

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

26.8 (Included clamps) 50-115

1310

Mast diameter supported (mm)

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

2099

Radome material

Frontal: 560 (at 150 km/h) Lateral: 170 (at 150 km/h) Maximum: 645 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

55

ADU4521R0v06 DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……Ry2 yL1

y - Yellow L - Left array

Pattern sample for reference

1695 - 2690 MHz

56

R - Right array

Ry2

ATR4518R15v06 DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M-R EasyRET 3H 6-Port Antenna with 3 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 3 x (1710 - 2200) 1710 - 1880

1850 - 1990

1920 - 2170

Polarization

2170 - 2200

High Band 2-8 Ports

Frequency range (MHz)

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.4

17.7

17.9

17.9

17.3 ±0.4

17.5 ±0.4

17.7 ±0.4

17.7 ±0.4

> 20

> 18

> 18

> 17

66 ±3

65 ±3

63 ±4

61 ±3

7.4 ±0.4

6.9 ±0.4

6.5 ±0.6

6.0 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Interband isolation (dB)

≥ 28

Front to back ratio, ±30° (dB)

> 25

> 26

> 27

> 27

Cross polar ratio (dB)

> 21

> 21

> 20

> 18

0°

Max. power per input (W)

300 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

1365 x 376 x 99

Packing dimensions (H x W x D) (mm)

1680 x 440 x 170

Antenna weight (kg)

16.2

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

25.4 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1365

Antenna dimensions (H x W x D) (mm)

1262

Mechanical Properties

Frontal: 660 (at 150 km/h) Lateral: 145 (at 150 km/h) Maximum: 660 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

Model

Description

ASMDT0C01 Mechanical downtilt: 0 - 16 °

Weight

Units per antenna

2.1 kg

1 (Separate packing)

57

ATR4518R15v06 DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M-R EasyRET 3H 6-Port Antenna with 3 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx..….....bL HWMxxx…….bbC HWMxxx...…bbbR

bL

bbC

b – Blue L - Left array R - Right array C - Center array

Pattern sample for reference

1710 - 2200 MHz (Left)

58

1710 - 2200 MHz (Center)

1710 - 2200 MHz (Right)

bbbR

ATR4518R14v06 DXXX-1710-2690/1710-2690/1710-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET 3H 6-Port Antenna with 3 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 3 x (1710 - 2690)

Frequency range (MHz)

1710 - 1990

1920 - 2200

2200 - 2490 +45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable, each band separately

at mid Tilt

17.6

18.0

18.4

18.6

17.4 ±0.4

17.8 ±0.4

18.1 ±0.4

18.3 ±0.5

> 19

> 22

> 20

> 19

Horizontal 3dB beam width (°)

66 ±5.5

65 ±4.2

64 ±3.8

60 ±3.2

Vertical 3dB beam width (°)

6.7 ±0.5

6.1 ±0.3

5.4 ±0.4

5.0 ±0.2

Gain (dBi)

High Band 2-8 Ports

Polarization

2490 - 2690

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

Interband isolation (dB)

≥ 30

Front to back ratio, ±30° (dB)

> 27

> 27

> 29

> 29

Cross polar ratio (dB)

> 26

> 25

> 23

> 23

0°

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1365 x 376 x 99

Packing dimensions (H x W x D) (mm)

1680 x 440 x 170

Antenna weight (kg)

106

17.3

Clamps weight (kg)

3.0 (2 units) 27.0 (included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1365

Mast diameter supported (mm)

1262

Antenna packing weight (kg)

-40 .. +65 Frontal: 660 (at 150 km/h) Lateral: 145 (at 150 km/h) Maximum: 660 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

Model

Description

ASMDT0C01 Mechanical downtilt: 0 - 16 °

Weight

Units per antenna

2.1 kg

1 (Separate packing)

59

ATR4518R14v06 DXXX-1710-2690/1710-2690/1710-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET 3H 6-Port Antenna with 3 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx..….yL HWMxxx…..yyC yL

HWMxxx….yyyR y – Yellow R - Right array

yyC

L - Left array C - Center array

Pattern sample for reference

1710 - 2690 MHz (Left)

60

1710 - 2690 MHz (Center)

1710 - 2690 MHz (Right)

yyyR

AQU4518R21v06 DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/6518i/18i/18i/18i-M/M/M/M-R EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 4 x (1710 - 2690)

Frequency range (MHz)

1710 - 1990

1920 - 2200

2490 - 2690

+45° , -45°

Electrical downtilt (°)

0 - 12 , continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

High Band 2-8 Ports

Polarization

2200 - 2490

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.4

17.7

17.9

18.3

17.2 ±0.5

17.5 ±0.5

17.7 ±0.5

18.0 ±0.5

> 18

> 18

> 19

> 20

68 ±5

64 ±5

61 ±5

60 ±5

6.8 ±0.5

6.1 ±0.4

5.4 ±0.4

5.0 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28 (1710 - 2690 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 27

Cross polar ratio (dB)

> 22

0°

> 28

> 28

> 28

> 22

> 22

> 23

Max. power per input (W)

250 (at 50℃ ambient temperature)

Total power (W)

800 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 449 x 115

Packing dimensions (H x W x D) (mm)

1835 x 510 x 185

Antenna weight (kg)

23.9

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

35.8 (included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1385

50 - 115

1499

Mast diameter supported (mm)

-40 .. +65 Frontal: 715 (at 150 km/h) Lateral: 85 (at 150 km/h) Maximum: 715 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

61

AQU4518R21v06 DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/6518i/18i/18i/18i-M/M/M/M-R EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……….yL HWMxxx…....yyCL HWMxxx…..yyyCR

yL

HWMxxx…...yyyyR y – Yellow R - Right array

L - Left array C - Center array

Pattern sample for reference

62

1710 - 2690 MHz

1710 - 2690 MHz

(Left)

(Center Left)

yyCL

yyyCR yyyyR

Multi-band B - 3 1LnH

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 1710-2690

65/65

15/17.5

0-15/2-12 EasyRET2.0 4 x 4.3-10

1499 x 259 x 135

ADU4518R9v06

67

G

690-960/ 1710-2690

65/65

16/18

0-12/2-12 EasyRET2.0 4 x 4.3-10

2087 x 259 x 135

ADU4518R7v06

69

G

690-960/ 1710-2690

65/65

17/18

0-10/2-12 EasyRET2.0 4 x 4.3-10

2555 x 259 x 135

ADU4518R8v06

71

G

790-960/ 1710-2180

65/65

15/17.5

0-14/0-10 EasyRET2.0 4 x 4.3-10

1360 x 259 x 135

ADU4517R3v06

73

F

790-960/ 1710-2180

65/65

16.5/18.5

0-12/0-8

EasyRET1.0 4 x 4.3-10

1936 x 259 x 135

ADU4518R3v06

75

F

790-960/ 1710-2180

65/65

17.5/18.5

0-10/0-8

EasyRET1.0 4 x 4.3-10

2535 x 259 x 135

ADU4518R0v06

77

F

** Preliminary Issue

1LnH Band 4-12 Ports

4 Ports - 1L1H

Multi-band B - 3 1LnH

6 Ports - 1L2H Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

617-894/ 1695-2690/ 1695-2690

65/65/65

16/18/18

EasyRET2.0 6 x 4.3-10

2099 x 399 x 196

ATR4518R28v06

79

N

690-960/ 1695-2690/ 1695-2690

65/65/65

15/18/18

0-14/0-10/ EasyRET2.0 6 x 4.3-10 0-10

1499 x 349 x 166

ATR4518R13v06

81

N

690-960/ 1695-2690/ 1695-2690

65/65/65

16/18/18

0-10/0-10/ EasyRET2.0 6 x 4.3-10 0-10

1999 x 349 x 166

ATR4518R6v06

83

N

690-960/ 1695-2690/ 1695-2690

65/65/65

17/18/18

0-10/0-10/ EasyRET2.0 6 x 4.3-10 0-10

2528 x 349 x 166

ATR4518R11v06

85

N

790-960/ 1710-2180/ 1710-2180

65/65/65

16.5/16.5/ 0-12/0-12/ EasyRET1.0 6 x 4.3-10 16.5 0-12

2098 x 259 x 135

ATR4516R0v06

87

L

790-960/ 1710-2180/ 1710-2180

65/65/65

17.5/17.5/ 0-10/0-10/ EasyRET1.0 6 x 4.3-10 17.5 0-10

2680 x 259 x 135

ATR4517R0v06

89

L

** Preliminary Issue

0-12/012/0-12

Multi-band B - 3 1LnH

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 1710-2690/ 1710-2690/ 1710-2690

65/65/65/65

1499 x 369 x 149

AQU4518R14v07

91

TT

690-960/ 1695-2690/ 1695-2690/ 1695-2690

65/65/65/65

16/18/ 18/18

2-12/2-12/ EasyRET2.0 8 x 4.3-10 2-12/2-12

1999 x 369 x 149

AQU4518R11v07

94

TT

690-960/ 1695-2690/ 1695-2690/ 1695-2690

65/65/65/65

17/18/ 18/17.5

0-10/0-10/ EasyRET2.0 8 x 4.3-10 0-10/0-10

2528 x 349 x 166

AQU4518R9v06

97

U

690-960/ 1427-2690/ 1695-2690/ 1695-2690

65/65/65/65

15/17.5/ 0-14/2-12/ EasyRET2.0 8 x 4.3-10 18/18 2-12/2-12

1499 x 369 x 149

AQU4518R27v06

99

SS

690-960/ 1427-2690/ 1695-2690/ 1695-2690

65/65/65/65

16/17.5/ 2-12/2-12/ EasyRET2.0 8 x 4.3-10 18/18 2-12/2-12

1999 x 369 x 149

AQU4518R22v07

102

SS

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 1427-2690/ 65/65/65/65/ 1695-2200/ 65 2490-2690/ 1695-2690

15/17.5/ 0-14/2-12/ 17/17.5/ 2-12/2-12/ EasyRET2.0 10 x 4.3-10 17.5 2-12

1499 x 369 x 149

APE4518R37v06

105

X3

690-960/ 1695-2200/ 1695-2200/ 2490-2690/ 2490-2690

16/17.5/ 0-10/0-10/ 17.5/18/ 0-10/0-10/ EasyRET2.0 10 x 4.3-10 18 0-10

1999 x 349 x 166

APE4518R19v06

108

X2

15/17.5/ 0-14/2-12/ EasyRET2.0 8 x 4.3-10 17.5/17.5 2-12/2-12

10 Ports - 1L4H

65/65/65/ 65/65

** Preliminary Issue

1LnH Band 4-12 Ports

8 Ports - 1L3H

Multi-band B - 3 1LnH

10 Ports - 1L4H Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65

0-10/2-12/ 16/16.5/ 2-12/2-12/ EasyRET2.0 10 x 4.3-10 16.5/16/16 2-12

1999 x 349 x 166

APE4516R1v06

110

X

690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65

0-10/0-10/ 17/18/18 0-10/0-10/ EasyRET2.0 10 x 4.3-10 /17.5/17.5 0-10

2528 x 349 x 166

APE4517R0v06

112

X

Frequency 3dB Horizontal Electrical Tilt Method Connector Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 1427-2690/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690

2769 x 369 x 149

ASI4518R30v06

114

XX

12 Ports - 1L5H

17/17.5/1 2-12/2-12/ 7.5/17.5/1 2-12/2-12/ EasyRET2.0 12 x 4.3-10 7.5/17.5 2-12/2-12

65/65/65/ 65/65/65

** Preliminary Issue

Array Symbol Type Type F

Type G

Type L

Type M

Type N

Type SS

bT b

y

bL

bbR

Ly1

Ry2

Ly1

b1

Ry2

bbB r

r

r

Type TT

Type T

Type U

Cy2

Ry3

bLyL

Type XX

RTy3

r

Type X2

r

LBy1

RBy4 r1

LBy1

Type X3

RTy5

LTy2

Lb1Ly1 yyyRB

r1

r1

yyR yyLB

r1

Type X

LTy2

yLT Ly1

r

Cy3 r1

r1

Rb2Ry2

b1 Ly1

Cy2

RBy4

r1

Ry3

ADU4518R9v06 DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

1710 - 2690

824 - 894

880 - 960

Polarization

1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45° 0 - 15 , continuously adjustable

at mid Tilt Gain (dBi)

over all Tilts

14.5

14.5

14.6

14.7

16.8

17.2

17.4

18.1

14.5 ±0.3

14.5 ±0.3

14.6 ±0.4

14.7 ±0.4

16.7 ±0.5

17.1 ±0.5

17.4 ±0.5

17.9 ±0.5

> 17

> 18

> 18

> 17

> 17

> 18

> 18

> 18

68 ±5

66 ±4

64 ±3

62 ±3

60 ±5

62 ±5

60 ±5

60 ±5

15.3 ±1

14.0 ±0.7

13.3 ±0.6

12.3 ±0.7

7.2 ±0.7

6.5 ±0.6

5.7 ±0.5

5.3 ±0.3

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable

VSWR

< 1.5 ≥ 28

Cross polar isolation (dB)

≥ 28 ≥ 28 (690 - 960 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 25

> 26

> 26

> 25

> 26

> 28

> 28

> 29

Cross polar ratio (dB)

> 20

> 26

> 23

> 20

> 25

> 26

> 24

> 21

0°

500 (at 50℃ ambient temperature)

Max. power per input (W)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 259 x 135

Packing dimensions (H x W x D) (mm)

1835 x 360 x 225

Antenna weight (kg)

16.5

Clamps weight (kg)

3.0 (2 units) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1265

25.5 (Included clamps)

1499

Antenna packing weight (kg) Mast diameter supported (mm)

Frontal: 405 (at 150 km/h) Lateral: 185 (at 150 km/h) Maximum: 545 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

Model

Description

ASMDT0C01 Mechanical downtilt: 0 - 16 °

Weight

Units per antenna

2.1 kg

1 (Separate packing)

67

1LnH Band 4-12 ports

Electrical downtilt (°)

ADU4518R9v06 DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……..r HWMxxx….....y y

r - Red

y - Yellow

r

Pattern sample for reference

690 - 960 MHz

68

1710 - 2690 MHz

ADU4518R7v06 DXX-690-960/1710-2690-65/65-16i/18i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

1710 - 2690

824 - 894

880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45° 0 - 12 , continuously adjustable

at mid Tilt

Gain (dBi)

over all Tilts

15.5

15.9

16.0

16.1

17.1

17.5

17.8

18.3

15.5 ±0.4

15.7 ±0.4

15.8 ±0.3

16.0 ±0.3

17.0 ±0.5

17.4 ±0.5

17.7 ±0.3

18.1 ±0.4

> 18

> 18

> 18

> 18

> 17

> 17

> 17

> 17

69 ±2.4

66 ±1.6

64 ±1.5

63 ±2.1

63 ±4.8

61 ±4.0

60±2.2

60 ±4.0

10.5 ±0.5

9.8 ±0.4

9.5 ±0.4

8.9 ±0.4

7.2 ±0.5

6.5 ±0.5

5.6 ±0.3

5.5 ±0.3

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28 (690 - 960 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 24

> 25

> 25

> 25

> 24

> 25

> 25

> 26

Cross polar ratio (dB)

> 20

> 20

> 20

> 20

> 20

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

2087 x 259 x 135

Packing dimensions (H x W x D) (mm)

2380 x 315 x 220

Antenna weight (kg)

20.2

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

28.2 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 590 (at 150 km/h) Lateral: 270 (at 150 km/h) Maximum: 795 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2087

Radome material

1255

Mast diameter supported (mm)

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

69

1LnH Band 4-12 ports

Electrical downtilt (°)

ADU4518R7v06 DXX-690-960/1710-2690-65/65-16i/18i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r HWMxxx……y r - Red

y

y - Yellow r

Pattern sample for reference

690 - 960 MHz

70

1710 - 2690 MHz

ADU4518R8v06 DXX-690-960/1710-2690-65/65-17i/18i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

1710 - 2690

824 - 894

880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45° 0 - 10 , continuously adjustable

at mid Tilt

2 - 12 , continuously adjustable

16.6

16.7

17.1

17.3

17.1

17.5

17.8

18.3

16.5 ±0.3

16.6 ±0.4

17.0 ±0.4

17.2 ±0.4

17.0 ±0.5

17.4 ±0.5

17.7 ±0.3

18.1 ±0.4

> 17

> 18

> 18

> 18

> 17

> 17

> 17

> 17

Horizontal 3dB beam width (°)

69 ±2.5

66 ±2.5

64 ±2.3

63 ±2.0

63 ±4.8

61 ±4.0

60 ±2.2

60 ±4.0

Vertical 3dB beam width (°)

8.9 ±0.5

8.3 ±0.4

7.9 ±0.4

7.3 ±0.4

7.2 ±0.5

6.5 ±0.5

5.6 ±0.3

5.5 ±0.3

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28 (690 - 960 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 24

> 25

> 25

> 26

> 24

> 25

> 25

> 26

Cross polar ratio (dB)

> 20

> 20

> 20

> 20

> 20

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2555 x 259 x 135

Packing dimensions (H x W x D) (mm)

2970 x 315 x 220

Antenna weight (kg)

23.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

33.2 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 745 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 1005 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

2555

Radome material

1935

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0-8°

2.1 kg

1 (Separate packing)

71

1LnH Band 4-12 ports

Electrical downtilt (°)

ADU4518R8v06 DXX-690-960/1710-2690-65/65-17i/18i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r HWMxxx……y y

r - Red

y - Yellow

r

Pattern sample for reference

690 - 960 MHz

72

1710 - 2690 MHz

ADU4517R3v06 DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

1710 - 2180

824 - 894

880 - 960

Polarization

1710 - 1880

1850 - 1990

1920 - 2180

+45° , -45° 0 - 14 , continuously adjustable

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

0 - 10 , continuously adjustable

14.5

14.7

15.0

16.8

17.3

17.6

14.5 ±0.5

14.7 ±0.4

14.9 ±0.4

16.8 ±0.5

17.1 ±0.5

17.4 ±0.4

> 18

> 18

> 16

> 17

> 17

> 17

69 ±1.1

66 ±1.3

64 ±2.7

65 ±2.1

63 ±1.4

60±3.7

15.7 ±0.8

15.0 ±0.9

14.0 ±1.0

7.5 ±0.4

7.1 ±0.3

6.6 ±0.5

VSWR

1LnH Band 4-12 ports

Electrical downtilt (°)

< 1.5 ≥ 30

Cross polar isolation (dB)

≥ 30 (790 - 960 // 1710 - 2180 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 24

> 24

> 24

> 25

> 25

> 25

Cross polar ratio (dB)

> 25

> 25

> 25

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

300 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1360 x 259 x 135

Packing dimensions (H x W x D) (mm)

1655 x 315 x 195

Antenna weight (kg)

14.0

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

106

20.8 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1360

Radome material

1248

Mast diameter supported (mm)

Frontal: 360 (at 150 km/h) Lateral: 165 (at 150 km/h) Maximum: 485 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16°

1.3 kg

1 (Separate packing)

73

ADU4517R3v06 DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…...r HWMxxx……b r - Red

b

b - Blue

r

Pattern sample for reference

790 - 960 MHz

74

1710 - 2180 MHz

ADU4518R3v06 DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

1710 - 2180

824 - 894

880 - 960

Polarization

1710 - 1880

1850 - 1990

1920 - 2180

+45° , -45° 0 - 12 , continuously adjustable

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

0 - 8 , continuously adjustable

15.7

16.0

16.0

18.5

18.7

18.7

15.6 ±0.4

15.8 ±0.3

15.9 ±0.3

18.4 ±0.4

18.6 ±0.4

18.5 ±0.5

> 17

> 17

> 17

> 18

> 18

> 18

69 ±1.5

66 ±1.5

64 ±1.5

65 ±2.5

63 ±2.5

60±1.5

10.6 ±0.5

10.2 ±0.5

9.5 ±0.5

5.2 ±0.3

5.0 ±0.3

4.7 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

1LnH Band 4-12 ports

Electrical downtilt (°)

≥ 40 (790 - 960 // 1710 - 2180 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 24

> 25

> 25

> 25

> 25

> 25

Cross polar ratio (dB)

> 25

> 25

> 25

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

300 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1936 x 259 x 135

Packing dimensions (H x W x D) (mm)

2255 x 305 x 190

Antenna weight (kg)

18.0

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

26.0 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 545 (at 150 km/h) Lateral: 250 (at 150 km/h) Maximum: 730 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

1936

Radome material

1828

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 12 °

1.3 kg

1 (Separate packing)

75

ADU4518R3v06 DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 10 (motor activated) < 0.5 (stand by)

Adjustment time (full range) (s)

< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET connector Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…r HWMxxx…b b

r - Red

b - Blue

r

Pattern sample for reference

790 - 960 MHz

76

1710 - 2180 MHz

ADU4518R0v06 DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

1710 - 2180

824 - 894

880 - 960

Polarization

1710 - 1880

1850 - 1990

1920 - 2180

+45° , -45° 0 - 10 , continuously adjustable

at mid Tilt

0 - 8 , continuously adjustable

16.7

17.0

17.2

18.4

18.6

18.6

16.6 ±0.4

16.9 ±0.3

17.0 ±0.3

18.2 ±0.4

18.4 ±0.4

18.3 ±0.5

> 19

> 19

> 19

> 16

> 16

> 18

Horizontal 3dB beam width (°)

69 ±1.5

66 ±1.5

65 ±1.0

64 ±1.5

62 ±1.5

60±2.0

Vertical 3dB beam width (°)

8.4 ±0.5

8.0 ±0.5

7.5 ±0.5

5.2 ±0.3

4.9 ±0.3

4.6 ±0.4

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30

1LnH Band 4-12 ports

Electrical downtilt (°)

≥ 40 (790 - 960 // 1710 - 2180 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 25

> 25

> 25

> 25

> 25

> 26

Cross polar ratio (dB)

> 30

> 30

> 30

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

300 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2535 x 259 x 135

Packing dimensions (H x W x D) (mm)

2815 x 305 x 190

Antenna weight (kg)

21.9

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

32.2 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

2426

50 - 115

-40 .. +65 Frontal: 740 (at 150 km/h) Lateral: 335 (at 150 km/h) Maximum: 995 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2535

Mast diameter supported (mm)

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0-8°

2.1 kg

1 (Separate packing)

77

ADU4518R0v06 DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R EasyRET 4-Port Antenna with 2 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 10 (motor activated) < 0.5 (stand by)

Adjustment time (full range) (s)

< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET connector Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…r HWMxxx…b r - Red

b

b - Blue r

Pattern sample for reference

790 - 960 MHz

78

1710 - 2180 MHz

ATR4518R28v06 DXXX-617-894/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 617 - 894

Frequency range (MHz)

617 - 698

Polarization

2 x (1695 - 2690)

698 - 798

798 - 894

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

2 - 12, continuously adjustable, each band separately

at mid Tilt Gain (dBi)

over all Tilts

15.2

15.8

16.2

17.3

17.6

17.8

18.2

15.0 ±0.5

15.7 ±0.5

16.0 ±0.5

17.1 ±0.5

17.4 ±0.5

17.6 ±0.5

18.0 ±0.5

> 17

> 17

> 17

> 16

> 17

> 17

> 17

67 ±3

64 ±3

61 ±3

65 ±5

63 ±3

62 ±4

60 ±5

12.5 ±0.8

10.8 ±0.7

9.4 ±0.5

6.7 ±0.6

6.0 ±0.5

5.4 ±0.3

5.0 ±0.3

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 25

> 25

> 26

> 27

> 26

> 26

Cross polar ratio (dB)

> 20

> 20

> 20

> 18

> 19

>20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2099 x 399 x 196

Packing dimensions (H x W x D) (mm)

2285 x 465 x 250 106

Antenna weight (kg)

29.5

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

40.5 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 570 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 725 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1310 2099

Mast diameter supported (mm)

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

79

1LnH Band 4-12 ports

Electrical downtilt (°)

+45° , -45°

ATR4518R28v06 DXXX-617-894/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx….Ly1 HWMxxx……r1 HWMxxx….Ry2 r - Red L - Left array

y - Yellow R - Right array

Pattern sample for reference

617 - 894 MHz

80

1695 - 2690 MHz

ATR4518R13v06 DXXX-690-960/1695-2690/1695-2690-65/65/65-15i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 690 - 960 Frequency range (MHz)

2 x (1695 - 2690) 1695 1990

690 - 803 790 - 862 824 - 894 880 - 960

Polarization

1920 2200

2200 2490

2490 2690

+45° , -45°

at mid Tilt

Gain (dBi)

0 - 10 , continuously adjustable , each band separately

0 - 14 , continuously adjustable 14.4

14.5

14.7

15.1

over all Tilts 14.3 ±0.5 14.5 ±0.5 14.8 ±0.5 15.0 ±0.5

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.5

17.8

18.2

18.3

17.3 ±0.6

17.7 ±0.5

18.1 ±0.6

18.2 ±0.5

> 16

> 17

> 17

> 17

> 19

> 19

> 19

> 19

65 ±2.5

64 ±2.0

64 ±2.0

64 ±3.2

65 ±3.9

63 ±3.3

62 ±4.8

60 ±4.5

7.1 ±0.6

6.5 ±0.5

5.8 ±0.5

5.2 ±0.3

15.6 ±1.2 13.7 ±0.9 13.1 ±0.8 12.2 ±0.8

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 30

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 23

> 24

> 24

> 23

> 25

> 27

> 26

> 25

Cross polar ratio (dB)

> 19

> 20

> 20

> 22

> 18

> 19

> 20

> 19

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 349 x 166

Packing dimensions (H x W x D) (mm)

1880 x 425 x 250

Antenna weight (kg)

19.7 3.6 (2 units)

Antenna packing weight (kg)

28.9 (included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1499

Mast diameter supported (mm)

1310

Clamps weight (kg)

Frontal: 460 (at 150 km/h) Lateral: 130 (at 150 km/h) Maximum: 480 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

81

1LnH Band 4-12 ports

Electrical downtilt (°)

ATR4518R13v06 DXXX-690-960/1695-2690/1695-2690-65/65/65-15i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……r1 Ly1

HWMxxx…..Ry2 r - Red y - Yellow L - Left array R - Right array

Ry2

r1

Pattern sample for reference

690 - 960 MHz

82

1695 - 2690 MHz (Left)

1695 - 2690 MHz (Right)

ATR4518R6v06 DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960 Frequency range (MHz)

2 x (1695 - 2690) 1695 1990

690 - 803 790 - 862 824 - 894 880 - 960

Polarization

1920 2200

2200 2490

2490 2690

+45° , -45°

at mid Tilt

Gain (dBi)

0 - 10 , continuously adjustable , each band separately

0 - 10 , continuously adjustable

over all Tilts

15.5

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.9

16.0

16.1

15.5 ±0.5 15.8 ±0.5 15.8 ±0.5 16.0 ±0.6

17.1

17.5

17.8

18.3

17.1 ±0.5

17.5 ±0.4

17.8 ±0.5

18.2 ±0.4

> 18

> 18

> 18

> 18

> 19

> 19

> 19

> 19

65 ±1.7

65 ±1.4

65 ±1.7

65 ±2.4

65 ±4.3

64 ±3.2

63 ±4.4

62 ±4.1

10.3 ±0.7

9.5 ±0.5

9.2 ±0.6

8.6 ±0.5

7.1 ±0.5

6.5 ±0.5

5.8 ±0.4

5.3 ±0.2

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 30

Front to back ratio , ±30° (dB)

> 25

> 25

> 25

> 25

> 25

> 27

> 26

> 25

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 18

> 18

> 17

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1999 x 349 x 166

Packing dimensions (H x W x D) (mm)

2350 x 415 x 240

Antenna weight (kg)

23.4

Clamps weight (kg)

3.6 (2 units)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1310

35.7 (included clamps)

1999

Antenna packing weight (kg)

Frontal: 630 (at 150 km/h) Lateral: 180 (at 150 km/h) Maximum: 665 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Downtilt kit ASMDT0D01

Description

Weight

Units per antenna

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

83

1LnH Band 4-12 ports

Electrical downtilt (°)

ATR4518R6v06 DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……r1 Ly1

HWMxxx…..Ry2 r - Red y - Yellow L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

84

1695 - 2690 MHz (Left)

1695 - 2690 MHz (Right)

Ry2

r1

ATR4518R11v06 DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45°

at mid Tilt

Gain (dBi)

0 - 10 , continuously adjustable , each band separately

0 - 10 , continuously adjustable 16.5

over all Tilts

16.7

16.8

17.0

16.4 ±0.4 16.6 ±0.3 16.7 ±0.2 16.8 ±0.4

Side lobe suppression for first side lobe above main beam (dB)

17.1

17.5

17.8

18.2

17.1 ±0.5

17.5 ±0.4

17.8 ±0.5

18.2 ±0.3

> 17

> 17

> 17

> 17

> 19

> 19

> 19

> 19

Horizontal 3dB beam width (°)

66 ±1.3

66 ±1.4

65 ±1.3

65 ±1.9

65 ±4.6

64 ±4.1

63 ±3.4

62 ±4.1

Vertical 3dB beam width (°)

9.0 ±0.6

8.3 ±0.4

7.5 ±0.4

7.2 ±0.4

7.1 ±0.5

6.5 ±0.5

5.8 ±0.3

5.3 ±0.2

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 30

Front to back ratio , ±30° (dB)

> 25

> 26

> 27

> 26

> 25

> 27

> 26

> 25

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 18

> 18

> 18

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2528 x 349 x 166

Packing dimensions (H x W x D) (mm)

2880 x 415 x 245

Antenna weight (kg)

27.4

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

43.1 (included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 825 (at 150 km/h) Lateral: 240 (at 150 km/h) Maximum: 870 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2528

Radome material

1885

Mast diameter supported (mm)

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 8 °

2.1 kg

1 (Separate packing)

85

1LnH Band 4-12 ports

Electrical downtilt (°)

ATR4518R11v06 DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……r1 Ly1

HWMxxx…..Ry2 r - Red y - Yellow L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

86

1695 - 2690 MHz (Left)

1695 - 2690 MHz (Right)

Ry2

r1

ATR4516R0v06 DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

2 x (1710 - 2180)

824 - 894

880 - 960

Polarization

1920 - 2180

over all Tilts

16.0

16.3

16.2

15.9 ±0.5

16.0 ±0.4

16.1 ±0.4

at mid Tilt over all Tilts

16.2

16.4

16.5

16.0 ±0.4

16.2 ±0.4

16.3 ±0.4

16.0

16.4

16.5

15.8 ±0.4

16.2 ±0.4

16.3 ±0.4

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)

Vertical 3dB beam width (°)

> 18

> 19

> 19

> 17

> 18

> 17

69 ±2.0

66 ±2.0

65 ±3.0

64 ±4.0

60 ±5.0

60 ±5.0

Bottom: 9.6 ±0.6

Bottom: 8.9 ±0.5

Bottom: 8.3 ±0.6

10.7 ±0.5

10.1 ±0.5

9.4 ±0.5

VSWR

Top: 8.5 ±0.6

Top: 8.0 ±0.5

Top: 7.5 ±0.6

< 1.5 ≥ 30

Cross polar isolation (dB)

≥ 40 (790 - 960 // 1710 - 2180 MHz) ≥ 35 (1710 - 2180 // 1710 - 2180 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 24

> 25

> 25

> 25

> 25

> 24

Cross polar ratio (dB)

> 26

> 26

> 26

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

300 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2098 x 259 x 135

Packing dimensions (H x W x D) (mm)

2380 x 305 x 190

Antenna weight (kg)

20.2

Clamps weight (kg)

3.0 (2 units) 29.4 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

Wind load (N)

Frontal: 595 (at 150 km/h) Lateral: 270 (at 150 km/h) Maximum: 800 (at 150 km/h)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector Connector position

1989

Mast diameter supported (mm)

2098

Antenna packing weight (kg)

6 x 4.3-10 Female Bottom

87

1LnH Band 4-12 ports

0 - 12 , continuously adjustable , each band separately

at mid Tilt

Top

1850 - 1990

+45° , -45°

Electrical downtilt (°)

Gain (dBi) Bottom

1710 - 1880

ATR4516R0v06 DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5i-M/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 10 (motor activated) < 0.5 (stand by)

Adjustment time (full range) (s)

< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET connector Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…….r

bT

HWMxxx…..bT HWMxxx…bbB r - Red T - Top array

b - Blue B - Bottom array

bbB r

Pattern sample for reference

790 - 960MHz 88

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

ATR4517R0v06 DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5iM/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

824 - 894

2 x (1710 - 2180) 880 - 960

Polarization

1920 - 2180

0 - 10 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Top

1850 - 1990

16.8

17.1

17.3

16.7 ±0.4

16.9 ±0.4

17.1 ±0.4

at mid Tilt over all Tilts

17.1

17.6

17.6

16.9 ±0.4

17.4 ±0.4

17.4 ±0.4

17.1

17.3

17.3

16.8 ±0.4

17.1 ±0.4

17.0 ±0.5

> 18

> 16

> 15

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

> 19

> 19

> 19

69 ±2.0

66 ±2.0

65 ±3.0

63 ±4.0

62 ±3.0

60 ±4.0

7.5 ±0.4

Bottom: 7.5 ±0.3

Bottom: 7.0 ±0.3

Bottom: 6.6 ±0.4

Top: 7.0 ±0.3

Top: 6.5 ±0.3

Top: 6.1 ±0.4

8.4 ±0.4

8.0 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30 ≥ 40 (790 - 960 // 1710 - 2180 MHz) ≥ 40 (1710 - 2180 // 1710 - 2180 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 25

> 25

> 26

> 26

> 26

> 26

Cross polar ratio (dB)

> 28

> 28

> 28

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

300 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2680 x 259 x 135

Packing dimensions (H x W x D) (mm)

2965 x 305 x 190

Antenna weight (kg)

24.5

Clamps weight (kg)

3.0 (2 units) 32.5 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

Wind load (N)

Frontal: 790 (at 150 km/h) Lateral: 360 (at 150 km/h) Maximum: 1060 (at 150 km/h)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector Connector position

2572

Mast diameter supported (mm)

2680

Antenna packing weight (kg)

6 x 4.3-10 Female Bottom

89

1LnH Band 4-12 ports

Electrical downtilt (°)

Gain (dBi) Bottom

1710 - 1880

+45° , -45°

ATR4517R0v06 DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5iM/M/M-R EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.6m Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 8 °

2.1 kg

1 (Separate packing)

Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 10 (motor activated) < 0.5 (stand by)

Adjustment time (full range) (s)

< 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET connector Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…….r

bT

HWMxxx…..bT HWMxxx…bbB r - Red T - Top array

b - Blue B - Bottom array

bbB r

Pattern sample for reference

790 - 960MHz 90

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

AQU4518R14v07 DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET 8-Port Antenna with 4 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 690 - 960(r1) 690 - 803

790 - 862

Polarization

824 - 894

880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1710 - 2690(Ry3) +45° , -45°

0 - 14 , continuously adjustable

at mid Tilt

14.1

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

14.5

14.6

2 - 12 , continuously adjustable 14.8

17.3

17.6

18.0

18.1

14.1 ±0.5 14.5 ±0.5 14.6 ±0.5 14.7 ±0.5 17.1 ±0.5 17.4 ±0.5 17.7 ±0.4 17.8 ±0.5 > 16

> 17

> 17

> 17

> 16

> 16

> 16

> 16

66 ±1.1

67 ±0.8

65 ±1.4

63 ±3

66 ±5.1

64 ±5.3

60 ±4.5

59 ±4.7

6.9 ±0.6

6.2 ±0.5

5.4 ±0.4

5.1 ±0.4

15.3 ±1.0 13.7 ±1.0 13.0 ±0.7 12.0 ±0.8

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 24

> 25

> 25

> 24

> 25

> 25

> 28

> 26

Cross polar ratio (dB)

> 21

> 20

> 20

> 20

> 20

> 20

> 18

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1710 - 2690(Cy2)

Frequency range (MHz)

1710- 2690(Ly1)

1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable

2 - 12 , continuously adjustable

17.2

17.5

17.8

18.0

17.4

17.7

18.0

18.2

17.0 ±0.5

17.3 ±0.5

17.6 ±0.4

17.7 ±0.5

17.2 ±0.5

17.5 ±0.5

17.8±0.4

18.0 ±0.5

> 16

> 16

> 16

> 16

> 17

> 17

> 17

> 16

Horizontal 3dB beam width (°)

64 ±6.3

63 ±6.7

60 ±6.1

59 ±4.0

67 ±5.3

65 ±4.8

61 ±3.5

60 ±2.9

Vertical 3dB beam width (°)

6.9 ±0.5

6.2 ±0.5

5.4 ±0.4

5.1 ±0.3

6.9 ±0.6

6.2 ±0.5

5.4 ±0.5

5.1 ±0.4

Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 25

> 28

> 26

> 25

> 26

> 28

> 27

Cross polar ratio (dB)

> 20

> 20

> 18

> 17

> 22

> 22

> 19

> 22

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Impedance (Ω) Grounding

* Total power : 700 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

91

1LnH Band 4-12 ports

Frequency range (MHz)

AQU4518R14v07 DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET 8-Port Antenna with 4 Integrated RCUs - 1.4m Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 369 x 149

Packing dimensions (H x W x D) (mm)

1790 x 435 x 240

Antenna weight (kg)

24.8

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

35.0 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1381

50 - 115

-40 .. +65 Frontal: 425 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 510 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

92

690 - 960 MHz

1710 - 2690 MHz （Ry3）

1710 - 2690 MHz （Cy2）

1710 - 2690 MHz (Ly1)

1499

Mast diameter supported (mm)

AQU4518R14v07 DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R EasyRET 8-Port Antenna with 4 Integrated RCUs - 1.4m Integrated RET Specifications

RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……L y1 HWMxxx……...r1 HWMxxx……Cy2

Ly1

Cy2

Ry3

HWMxxx……Ry3 r - Red y - Yellow L - Left array C - Center array R - Right array

r1

93

1LnH Band 4-12 ports

Properties

AQU4518R11v07 DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1695 - 2690 (Ry3) +45° , -45°

2 - 12 , continuously adjustable , each band separately at mid Tilt

15.4

15.8

15.9

16.2

17.4

17.8

18.0

18.4

over all Tilts

15.3 ±0.5

15.7 ±0.5

15.8 ±0.5

16.1 ±0.5

17.3 ±0.5

17.7 ±0.5

17.8 ±0.4

18.0 ±0.5

> 16

> 17

> 17

> 17

> 17

> 17

> 17

> 16

68 ±3.0

65 ±2.5

66 ±3.5

63 ±3.7

68 ±4.5

66 ±4.9

62 ±3.7

60 ±4.8

10.8 ±1.0

9.5 ±0.5

9.2 ±0.4

8.5 ±0.5

6.7 ±0.5

5.9 ±0.5

5.3 ±0.5

4.8 ±0.3

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 25

> 25

> 25

> 25

> 25

> 26

> 25

Cross polar ratio (dB)

> 22

> 22

> 22

> 22

> 22

> 21

> 20

> 18

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2690 (Cy2)

Frequency range (MHz)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45°

+45° , -45°

2 - 12 , continuously adjustable , each band separately

Electrical downtilt (°) Gain (dBi)

1695 - 2690 (Ly1)

at mid Tilt

17.1

17.6

17.7

18.1

17.4

17.8

18.0

18.4

over all Tilts

17.0 ±0.5

17.4 ±0.5

17.6 ±0.4

17.9 ±0.5

17.2 ±0.5

17.7 ±0.5

17.8 ±0.4

18.3 ±0.5

> 17

> 16

> 16

> 16

> 17

> 17

> 17

> 16

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)

67 ±4.8

65 ±4.8

60 ±5.0

57 ±4.5

68 ±5.2

66 ±4.6

61.0 ±5.2

60 ±4.4

Vertical 3dB beam width (°)

6.5 ±0.5

5.8 ±0.5

5.4 ±0.4

4.8 ±0.4

6.7 ±0.5

5.9 ±0.4

5.3 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 27

> 28

> 26

> 26

> 24

> 25

> 26

> 26

Cross polar ratio (dB)

> 21

> 20

> 17

> 22

> 22

> 22

> 22

> 22

0°

Max. power per input (W)

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Impedance (Ω) Grounding

* Total power : 900 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

94

AQU4518R11v07 DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m Integrated RET Specifications Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 369 x 149

Packing dimensions (H x W x D) (mm)

2265 x 435 x 240

Antenna weight (kg)

106

30.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

46.3 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 580 (at 150 km/h) Lateral: 195 (at 150 km/h) Maximum: 700 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1695 - 2690 MHz (Cy2)

1695 - 2690 MHz (Ry3)

1695 - 2690 MHz (Ly1)

95

1LnH Band 4-12 ports

Fiberglass 1404 1999

Radome material

AQU4518R11v07 DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……...r1

Ly1

Cy2

Ry3

HWMxxx……Cy2 HWMxxx……Ry3 r - Red y - Yellow C - Center array L - Left array

96

r1

R - Right array

AQU4518R9v06 DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6517i/18i/18i/17.5i-M/M/M/M-R EasyRET 8-Port Antenna with 4 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

3 x (1695 - 2690)

824 - 894

880 - 960

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts

Bottom

16.2

16.5

16.7

17.0

16.1 ±0.5

16.3 ±0.4

16.5 ±0.4

16.8 ±0.4

at mid Tilt over all Tilts at mid Tilt

Top

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

> 17

> 18

> 17

> 17

17.1

17.3

17.1

17.6

16.9 ±0.5

17.1 ±0.3

17.0 ±0.4

17.4 ±0.5

16.8

17.1

16.8

17.3

16.7 ±0.5

17.0 ±0.4

16.7 ±0.4

17.1 ±0.5

> 17

> 17

>17

> 16

Horizontal 3dB beam width (°)

67 ±1.9

66 ±3.5

65 ±2.4

62 ±3.3

63 ±3.4

62 ±2.8

61 ±3.7

60 ±3.1

Vertical 3dB beam width (°)

8.8 ±0.6

8.5 ±0.4

8.0 ±0.3

7.4 ±0.3

7.4 ±0.5

6.8 ±0.5

6.0 ±0.4

5.5 ±0.4

> 24

> 25

> 25

> 17

> 17

> 17

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 30

Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)

0°

Max. power per input (W)

> 25

> 25

> 25

> 25

> 24

> 20

> 20

> 20

> 20

> 17

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

960 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2528 x 349 x 166

Packing dimensions (H x W x D) (mm)

2880 x 415 x 245

Antenna weight (kg)

29.7

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

45.2 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 825 (at 150 km/h) Lateral: 240 (at 150 km/h) Maximum: 870 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1885

50 - 115

Radome material

2528

Mast diameter supported (mm)

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 8 °

2.1 kg

1 (Separate packing)

97

1LnH Band 4-12 ports

Electrical downtilt (°)

Gain (dBi)

1695 - 1990 +45° , -45°

AQU4518R9v06 DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6517i/18i/18i/17.5i-M/M/M/M-R EasyRET 8-Port Antenna with 4 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……….Ly1 RTy2

HWMxxx……..RTy2 HWMxxx……..RBy3 HWMxxx..………..r1 r - Red y - Yellow L - Left array R - Right array T - Top array B - Bottom array

Pattern sample for reference

690 - 960 MHz 98

1695 - 2690 MHz

Ly1

r1

RBy3

AQU4518R27v06 DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6515i/17.5i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs – 1.4m Antenna Specifications Electrical Properties 690 - 803

790 - 862

Polarization Electrical downtilt (°) Gain (dBi)

at mid Tilt

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

824 - 894

880 - 960

1695 1990

1920 2200

2200 2490

+45° , -45°

+45° , -45°

0 - 14 , continuously adjustable

2 - 12 , continuously adjustable

14.0

over all Tilts

1427 - 2690 (Ry3) 1427 1518

14.5

14.7

15.9

15.0

14.0 ±0.5 14.4 ±0.5 14.7 ±0.5 14.9 ±0.5

15.8 ±0.5

2490 2690

17.5

17.8

18.1

17.1 ±0.5

17.2 ±0.5

17.5 ±0.4

17.6 ±0.5

17.3

> 17

> 17

> 16

> 16

> 15

> 17

> 17

> 15

> 16

68 ±1.8

66 ±2.5

64 ±2.5

61 ±2.0

73 ±6.0

69 ±5.5

68 ±5.7

63 ±4.7

58 ±4.0

8.0 ±0.4

6.5 ±0.6

5.9 ±0.5

5.1 ±0.4

4.8 ±0.4

15.4 ±1.1 13.8 ±1.0 13.2 ±0.7 12.3 ±0.6

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 23

> 24

> 26

> 22

> 23

> 23

> 27

> 24

Cross polar ratio (dB)

> 20

> 22

> 22

> 20

> 20

> 22

> 21

> 22

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

Intermodulation IM3 (dBc)

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2690 (Cy2)

Frequency range (MHz)

1695 - 2690 (Ly1)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2 - 12 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

2 - 12 , continuously adjustable

17.3

17.5

18.0

18.2

17.4

17.8

18.3

18.4

17.1 ±0.5

17.3 ±0.5

17.8 ±0.4

18.0 ±0.5

17.2 ±0.5

17.6 ±0.5

18.0 ±0.4

18.3 ±0.5

> 16

> 16

> 18

> 18

> 17

> 17

> 18

> 18

Horizontal 3dB beam width (°)

63 ±6.0

62 ±6.0

58 ±5.0

58 ±5.0

69 ±4.0

67 ±4.0

62 ±3.0

58 ±4.0

Vertical 3dB beam width (°)

6.5 ±0.5

5.9 ±0.5

5.1 ±0.2

4.8 ±0.3

6.5 ±0.5

5.9 ±0.4

5.1 ±0.2

4.8 ±0.2

> 27

> 27

> 26

> 22

> 19

> 22

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 27

Cross polar ratio (dB)

> 22

Max. power per input (W) Intermodulation IM3 (dBc)

0°

> 28

> 27

> 24

> 19

> 17

> 22

> 22

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Impedance (Ω) Grounding

≥ 28

> 28

* Total power : 700 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

99

1LnH Band 4-12 ports

690 - 960 (r1)

Frequency range (MHz)

AQU4518R27v06 DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6515i/17.5i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs – 1.4m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 369 x 149

Packing dimensions (H x W x D) (mm)

1790 x 435 x 240

Antenna weight (kg)

24.8

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

35.0 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1381 1499

Mast diameter supported (mm)

-40 .. +65 Frontal: 425 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 510 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

100

690 - 960 MHz

1427 - 2690 MHz (Ry3)

1695 - 2690 MHz （Cy2）

1695 - 2690 MHz (Ly1)

AQU4518R27v06 DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6515i/17.5i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs – 1.4m Integrated RET Specifications

RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1LnH Band 4-12 ports

Properties

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……...r1 HWMxxx……Cy2

Ly1

Cy2

Ry3

HWMxxx……Ry3 r - Red y - Yellow L - Left array C - Center array R - Right array

r1

101

AQU4518R22v07 DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6516i/17.5i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960 Frequency range (MHz)

690 803

Polarization

790 862

824 894

880 960

1427 1518

1695 1990

1920 2200

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1427 - 2690 (Ry3) 2200 2490

2490 2690

17.8

18.1

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt

15.4

15.7

15.9

16.1

over all Tilts

15.3 ±0.5

15.6 ±0.5

15.8 ±0.5

16.0 ±0.5

> 17

> 17

> 17

> 17

> 15

> 17

> 17

> 17

> 16

67 ±3.1

65 ±1.5

65 ±2.0

63 ±2.7

73 ±6.0

68 ±5.0

67 ±5.0

65 ±3.7

60 ±5.4

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.0

17.3

17.5

15.9 ±0.5 17.1 ±0.5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5

10.8 ±1.0 9.7 ±0.5 9.4 ±0.5 8.8 ±0.4 8.1 ±0.4 6.6 ±0.5 6.0 ±0.5 5.1 ±0.4 4.8 ±0.3

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB) Cross polar ratio (dB)

0°

Max. power per input (W)

> 23

> 25

> 25

> 25

> 22

> 22

> 22

> 22

> 22

> 19

400 (at 50℃ ambient temperature)*

> 25

> 26

> 25

> 20

> 20

> 20

> 18

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

> 25

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2690 (Cy2)

Frequency range (MHz)

1695 - 2690 (Ly1)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45°

Electrical downtilt (°)

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt

17.2

17.5

18.0

18.1

17.4

17.7

18.0

18.4

over all Tilts

17.0 ±0.5

17.3 ±0.5

17.8 ±0.4

18.0 ±0.6

17.2 ±0.5

17.5 ±0.5

17.8 ±0.4

18.1±0.5

> 17

> 17

> 17

> 16

> 17

> 17

> 17

> 16

Horizontal 3dB beam width (°)

67 ±5.0

65 ±3.5

60 ±5.0

59 ±5.5

67 ±5.2

65 ±4.6

62.0±3.0

59 ±4.4

Vertical 3dB beam width (°)

6.6 ±0.5

6.0 ±0.5

5.2 ±0.4

5.0 ±0.4

6.6 ±0.5

6.0 ±0.4

5.2 ±0.4

5.0 ±0.4

Gain (dBi)

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 27

> 28

> 26

> 26

> 25

> 25

> 26

> 25

Cross polar ratio (dB)

> 20

> 20

> 17

> 20

> 20

> 20

> 20

> 20

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Impedance (Ω) Grounding * Total power : 900 W (at 50℃ ambient temperature)

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

102

AQU4518R22v07 DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6516i/17.5i/18i/18i-M/M/M/M-R EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 369 x 149

Packing dimensions (H x W x D) (mm)

2265 x 435 x 240

Antenna weight (kg)

106

30.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

46.3 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 580 (at 150 km/h) Lateral: 195 (at 150 km/h) Maximum: 700 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1427 – 2690 MHz (Ry3)

1695 – 2690 MHz (Cy2)

1695 – 2690 MHz (Ly1)

103

1LnH Band 4-12 ports

50 - 115 1404 1999

Mast diameter supported (mm)

AQU4518R22v07 DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/65-

AQU4518R22v07 16i/17.5i/18i/18i-M/M/M/M-R

DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/65-16i/17.5i/18i/18iEasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m M/M/M/M-R EasyRET 1L3HRET 8-Port Antenna with 4 Integrated RCUs - 2.0m Integrated Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……...r1

Ly1

Cy2

HWMxxx……Cy2 HWMxxx……Ry3 r - Red y - Yellow C - Center array L - Left array

104

r1

R - Right array

Ry3

APE4518R37v06 DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 690 803

790 862

Polarization Electrical downtilt (°) Gain (dBi)

1427 - 2690 (Ry3)

824 894

880 960

1427 1518

1695 1990

1920 2200

2200 2490

2490 2690

+45° , -45°

+45° , -45°

0 - 14, continuously adjustable

2 - 12 , continuously adjustable

at mid Tilt

14.0

14.4

14.6

14.9

over all Tilts

14.0 ±0.4

14.4 ±0.5

14.6 ±0.5

14.8 ±0.4

> 17

> 17

> 16

> 16

> 15

> 17

> 17

> 16

> 16

67 ±2.0

66 ±3.0

64 ±3.0

61 ±4.0

74 ±6.0

69 ±5.0

68 ±5.5

64 ±5.0

60 ±4.0

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)

15.3 ±2.0

Vertical 3dB beam width (°)

15.8

17.3

17.4

13.6 ±2.0 13.2 ±0.7 12.2 ±0.8 8.0 ±0.4 6.5 ±0.6 5.9 ±0.5 5.1 ±0.4 4.8 ±0.4 < 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB) Cross polar ratio (dB)

0°

Max. power per input (W)

17.9

15.7 ±0.5 17.1 ±0.5 17.2 ±0.5 17.4 ±0.4 17.7 ±0.5

VSWR

Front to back ratio , ±30° (dB)

17.6

≥ 28

> 22

> 23

> 24

> 24

> 22

> 20

> 20

> 20

> 20

> 18

> 24

> 24

> 26

> 24

> 20

> 20

> 20

> 17

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Intermodulation IM3 (dBc) Impedance (Ω) Grounding

Electrical Properties 1695 - 2200 (b1) Frequency range (MHz)

1695 1990

1920 2200

2490 - 2690 (Ly1)

Polarization

1695 - 2690 (Cy2) 1920 2200

1695 - 1990

2200 - 2490 2490 - 2690

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately 16.9

17.5

18.0

17.3

17.5

17.8

17.9

16.7 ±0.5

17.2 ±0.5

17.7 ±0.5

17.1 ±0.5

17.3 ±0.5

17.6 ±0.4

17.7 ±0.5

> 16

> 17

> 16

> 16

> 16

> 16

> 17

Horizontal 3dB beam width (°)

69 ±5.0

66 ±5.0

58 ±5.0

63 ±5.0

62 ±6.0

58 ±5.3

58 ±5.1

Vertical 3dB beam width (°)

6.4 ±0.5

5.8 ±0.5

4.6 ±0.3

6.5 ±0.6

5.8 ±0.5

5.1 ±0.4

4.8 ±0.3

Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Front to back ratio, ±30°(dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc)

≥ 28

≥ 28

Interband isolation (dB) 0°

> 23 > 22

> 26 > 21

> 24

> 27

> 28

> 28

> 26

> 20

> 22

> 19

> 17

> 21

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

105

1LnH Band 4-12 ports

690 - 960 (r1) Frequency range (MHz)

APE4518R37v06 DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 369 x 149

Packing dimensions (H x W x D) (mm)

1790 x 435 x 240

Antenna weight (kg)

106

26.3

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

38.4 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1381 1499

Mast diameter supported (mm)

Frontal: 425 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 510 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

1427 - 2690 MHz

690 - 960 MHz

2490 - 2690 MHz

106

1695 - 2200 MHz

1695 - 2690 MHz

APE4518R37v06 DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m Integrated RET Specifications RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……..b1 HWMxxx……..r1

b1 Ly1

Cy2

Ry3

HWMxxx……Cy2 HWMxxx……Ry3

r1

r - Red y - Yellow b - Blue C - Center array L - Left array R - Right array

107

1LnH Band 4-12 ports

Properties

APE4518R19v06 DXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65-16i/17.5i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 10-Port Antenna with 5 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960 Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2200)

824 - 894

1695 1920

880 - 960

Polarization

1920 2200

2 x (2490 - 2690)

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

15.4

15.7

16.0

16.1

17.0

17.3

18.0

15.3 ±0.5

15.6 ±0.5

15.8 ±0.5

16.0 ±0.5

16.9 ±0.4

17.2 ±0.4

17.9 ±0.5

> 17

> 17

> 17

> 17

> 17

> 17

> 16

67 ±2

67 ±3

66 ±3

64 ±4

63 ±4

61 ±4

60 ±5

10.3 ±0.7

9.5 ±0.5

9.2 ±0.6

8.6 ±0.5

6.4 ±0.7

5.8 ±0.4

4.9 ±0.4

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 30

Front to back ratio , ±30° (dB)

> 23

> 24

> 24

> 24

> 25

> 26

> 24

Cross polar ratio (dB)

> 18

> 18

> 18

> 17

> 18

> 18

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

1000 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 349 x 166

Packing dimensions (H x W x D) (mm)

2350 x 415 x 240

Antenna weight (kg)

26.5

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

40.0 (included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 630 (at 150 km/h) Lateral: 180 (at 150 km/h) Maximum: 665 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

108

1999

Radome material

1310

Mast diameter supported (mm)

APE4518R19v06 DXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65-16i/17.5i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 10-Port Antenna with 5 Integrated RCUs - 2.0m Integrated RET Specifications RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lb1 HWMxxx……Ly1 Lb1 Ly1

HWMxxx……Ry2

r1

Rb2 Ry2

HWMxxx……Rb2 HWMxxx……...r1 r - Red y - Yellow b - Blue L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

1695 - 2200 MHz

2490 - 2690 MHz

109

1LnH Band 4-12 ports

Properties

APE4516R1v06 DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R EasyRET 10-Port Antenna with 5 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

4 x (1695 - 2690)

824 - 894

880 - 960

Polarization

1695 - 1990

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable at mid Tilt over all Tilts

2 - 12 , continuously adjustable , each band separately

15.4

15.7

16.0

16.1

15.3±0.5

15.6 ±0.5

15.8 ±0.5

16.0 ±0.5

at mid Tilt

Gain (dBi) Bottom

over all Tilts

15.8

16.2

16.5

16.7

15.8 ±0.5

16.2 ±0.5

16.5 ±0.4

16.6 ±0.6

at mid Tilt

Top

15.4

15.8

15.9

16.2

15.3 ±0.5

15.7 ±0.5

15.8 ±0.5

16.0 ±0.6

> 17

> 17

> 17

> 17

> 17

63 ±4.0

61 ±4.0

60 ±4.0

61 ±5.0

10.3 ±0.7

9.4 ±0.6

8.1 ±0.5

7.5 ±0.5

9.9 ±0.8

8.9 ±0.6

7.8 ±0.3

7.1 ±0.5

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

> 17

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

> 17

> 17

67 ±3.0

67 ±3.0

66 ±3.0

64 ±4.0

10.3 ±0.7

9.3 ±0.5

9.1 ±0.6

8.4 ±0.6

Bottom Top

VSWR

< 1.5 ≥ 28

≥ 28

Cross polar isolation (dB)

≥ 30

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 25

> 24

> 24

> 24

> 24

> 26

> 25

> 25

Cross polar ratio (dB)

> 18

> 18

> 18

> 17

> 18

> 18

> 18

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

1000 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 349 x 166

Packing dimensions (H x W x D) (mm)

2350 x 435 x 250

Antenna weight (kg)

26.5

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

40.0 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 630 (at 150 km/h) Lateral: 180 (at 150 km/h) Maximum: 665 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 8 °

2.1 kg

1 (Separate packing)

1310

50 - 115

1999

Mast diameter supported (mm)

110

106

APE4516R1v06 DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R EasyRET 10-Port Antenna with 5 Integrated RCUs - 2.0m Integrated RET Specifications RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…….LBy1 HWMxxx…….LTy2

RTy3

LTy2

HWMxxx……RTy3 HWMxxx..….RBy4

LBy1

r1

RBy4

HWMxxx……….r1 r - Red y - Yellow L - Left array R - Right array T - Top array B - Bottom array

Pattern sample for reference

690 - 960 MHz

1695 - 2690 MHz

111

1LnH Band 4-12 ports

Properties

APE4517R0v06 DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R EasyRET 10-Port Antenna with 5 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

4 x (1695 - 2690)

824 - 894

880 - 960

Polarization

1695 - 1990

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts

16.2

16.5

16.7

17.0

16.1 ±0.5

16.3 ±0.4

16.5 ±0.4

16.8 ±0.4

at mid Tilt

Gain (dBi) Bottom

over all Tilts

17.1

17.3

17.1

17.6

16.9 ±0.5

17.1±0.3

17.0 ±0.4

17.4 ±0.5

at mid Tilt

Top

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

> 17

> 17

> 17

16.8

17.1

16.8

17.3

16.7 ±0.5

17.0 ±0.4

16.7 ±0.4

17.1 ±0.5

> 17

> 17

> 17

> 16

> 17

Horizontal 3dB beam width (°)

67 ±1.9

66 ±3.5

65 ±2.4

62 ±3.3

63 ±3.4

62 ±2.8

61 ±3.7

60 ±3.1

Vertical 3dB beam width (°)

8.8 ±0.6

8.5 ±0.4

8.0 ±0.3

7.4 ±0.3

7.4 ±0.5

6.8 ±0.5

6.0 ±0.4

5.5 ±0.2

VSWR

< 1.5 ≥ 28

Cross polar isolation (dB)

≥ 28 ≥ 30

Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)

0°

Max. power per input (W)

> 25

> 25

> 25

> 25

> 24

> 24

> 25

> 25

> 20

> 20

> 20

> 20

> 17

> 17

> 17

> 17

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

1000 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2528 x 349 x 166

Packing dimensions (H x W x D) (mm)

2880 x 415 x 245

Antenna weight (kg)

32.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

47.5 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 825 (at 150 km/h) Lateral: 240 (at 150 km/h) Maximum: 870 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 8 °

2.1 kg

1 (Separate packing)

112

2528

Radome material

1885

Mast diameter supported (mm)

APE4517R0v06 DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R EasyRET 10-Port Antenna with 5 Integrated RCUs - 2.6m Integrated RET Specifications RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…….LBy1 HWMxxx…….LTy2

RTy3

LTy2

HWMxxx……RTy3 HWMxxx..….RBy4

LBy1

r1

RBy4

HWMxxx……….r1 r - Red y - Yellow L - Left array R - Right array T - Top array B - Bottom array

Pattern sample for reference

690 - 960 MHz

1695 - 2690 MHz

113

1LnH Band 4-12 ports

Properties

ASI4518R30v06 DXXXXXX-690-960/1427-2690/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 1L5H 12-Port Antenna with 6 Integrated RCUs - 2.6m

Antenna Specifications Electrical Properties 690 - 960 Frequency range (MHz)

690 803

790 862

Polarization

824 894

1427 1518

1695 1990

+45° , -45°

Electrical downtilt (°)

1920 2200

2200 2490

2490 2690

17.8

18.1

+45° , -45°

2 - 12, continuously adjustable , each band separately at mid Tilt

Gain (dBi)

1427 - 2690 880 960

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

16.2

16.6

16.8

15.9

17.0

17.3

17.5

16.1 ±0.5 16.5 ±0.5 16.7 ±0.5 16.9 ±0.5 15.8 ±0.5 17.1 ±0.5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5 >17

>16

>16

>16

> 15

> 17

> 17

> 15

> 16

Horizontal 3dB beam width (°)

67 ±2.5

65 ±2.6

63 ±2.1

61 ±1.6

73 ±6.0

69 ±4.5

68 ±4.7

63 ±4.7

58 ±4.0

Vertical 3dB beam width (°)

8.9 ±0.8 7.9 ±0.4 7.7 ±0.3 7.2 ±0.3

8.0 ±0.4

6.5 ±0.6

5.9 ±0.5

5.1 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30°(dB)

> 24

> 26

> 26

> 26

> 22

> 23

> 23

> 27

> 24

Cross polar ratio (dB)

> 18

> 18

> 20

> 20

> 18

> 22

> 22

> 20

> 17

0°

Max. power per input (W) Intermodulation IM3 (dBc)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 4 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately at mid Tilt

17.3

17.5

18.1

18.2

17.1 ±0.5

17.3 ±0.5

17.9 ±0.4

18.0 ±0.5

16.8

17.1

17.6

18.0

16.5 ±0.5

16.9 ±0.5

17.4 ±0.4

17.7 ±0.5

> 17

> 17

> 17

> 17

Horizontal 3dB beam width (°)

67 ±4.7

65 ±4.9

60 ±4.8

58 ±5.0

Vertical 3dB beam width (°)

6.6 ±0.7

6.0 ±0.7

5.2 ±0.5

4.8 ±0.4

Bottom Gain (dBi)

over all Tilts at mid Tilt

Top

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio, ±30°(dB)

> 25

> 27

> 27

> 26

Cross polar ratio (dB)

> 22

> 20

> 19

> 22

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

114

ASI4518R30v06 DXXXXXX-690-960/1427-2690/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 1L5H 12-Port Antenna with 6 Integrated RCUs - 2.6m 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 369 x 149

Packing dimensions (H x W x D) (mm)

2965 x 435 x 240

Antenna weight (kg)

41.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

62.3 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 845 (at 150 km/h) Lateral: 280 (at 150 km/h) Maximum: 1015 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1427 - 2690 MHz

1695 - 2690 MHz (Bottom)

1695 - 2690 MHz (Top)

115

1LnH Band 4-12 ports

50 - 115

Radome material

1901 2769

Mast diameter supported (mm)

ASI4518R30v06 DXXXXXX-690-960/1427-2690/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 1L5H 12-Port Antenna with 6 Integrated RCUs - 2.6m

Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……LTy2 HWMxxx……LBy1

RTy5

LTy2

HWMxxx……CBy3 HWMxxx……RBy4

LBy1

CBy3

HWMxxx……RTy5 HWMxxx…….....r1 r - Red y - Yellow C - Center array L - Left array T - Top array B - Bottom array

116

r1

R - Right array

RBy4

Multi-band B - 4 2LnH

Dimension(mm)

Model

Page

Array symbol

14.5/14.5/ 0-14/0-14/ EasyRET2.0 6 x 4.3-10 18 2-12

1499 x 429 x 196

ATR4518R24v06

123

KK

Frequency 3dB Horizontal Electrical Tilt Method Connector Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o) 690-960/ 690-960/ 1695-2690

65/65/65

690-960/ 690-960/ 1695-2690

65/65/65

16/16/18

0-10/0-10/ EasyRET2.0 6 x 4.3-10 2-12

1999 x 429 x 196

ATR4518R25v06

125

KK

690-960/ 690-960/ 1695-2690

65/65/65

17/17/18

0-10/0-10/ EasyRET2.0 6 x 4.3-10 2-12

2550 x 429 x 196

ATR4518R26v06

127

KK

690-862/ 880-960/ 1710-2690

65/65/65

14/14.5/ 0-12/0-12/ EasyRET2.0 6 x 4.3-10 17.5 2-12

1490 x 298 x 150

ATR4517R5v06

129

K

790-862/ 880-960/ 1710-2690

65/65/65

15.5/16/18

0-10/0-10/ EasyRET2.0 6 x 4.3-10 0-10

2020 x 298 x 150

ATR4518R2v06

131

K

790-862/ 880-960/ 1710-2690

65/65/65

16.5/17/18

0-10/0-10/ EasyRET2.0 6 x 4.3-10 0-10

2520 x 298 x 150

ATR4518R12v06

133

K

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

8 Ports - 2L2H

690-960/ 690-960/ 1427-2690/ 1427-2690 690-960/ 690-960/ 1427-2690/ 1427-2690

65/65/65/65

14.5/14.5/ 0-14/0-14/ EasyRET2.0 8 x 4.3-10 17.5/17.5 2-12/2-12

1499 x 469 x 206 **AQU4518R37v06

135

/

65/65/65/65

16/16/ 0-10/0-10/ EasyRET2.0 8 x 4.3-10 17.5/17.5 2-12/2-12

2099 x 449 x 196 **AQU4518R36v06

136

/

690-960/ 690-960/ 1695-2690/ 1695-2690

65/65/65/65

14.5/14.5/ 0-14/0-14/ EasyRET2.0 8 x 4.3-10 18/18 2-12/2-12

1499 x 429 x 196

AQU4518R23v06

137

S

690-960/ 690-960/ 1695-2690/ 1695-2690

65/65/65/65

1999 x 429 x 196

AQU4518R24v06

139

S

** Preliminary Issue

16/16/ 18/18

0-10/0-10/ EasyRET2.0 8 x 4.3-10 2-12/2-12

2LnH Band 6-16 Ports

6 Ports - 2L1H

Multi-band B - 4 2LnH Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 690-960/ 1695-2690/ 1695-2690

65/65/65/65

0-10/0-10/ EasyRET2.0 8 x 4.3-10 2-12/2-12

2550 x 429 x 196

AQU4518R25v06

141

S

690-862/ 880-960/ 1710-2690/ 1710-2690

65/65/65/65

14/14.5/ 0-12/0-12/ EasyRET2.0 8 x 4.3-10 17.5/17.5 0-10/0-10

1499 x 359 x 178

AQU4517R4v06

143

R

690-862/ 880-960/ 1695-2690/ 1695-2690

65/65/65/65

15.5/16/ 0-10/0-10/ EasyRET2.0 8 x 4.3-10 18/18 0-10/0-10

1999 x 349 x 166

AQU4518R30v07

145

R

690-803/ 824-960/ 1710-2690/ 1710-2690

65/65/65/65

14/14.5/ 0-12/0-12/ EasyRET2.0 8 x 4.3-10 17.5/17.5 0-10/0-10

1499 x 359 x 178

AQU4518R19v06

147

R

Frequency 3dB Horizontal Electrical Tilt Method Connector Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 690-960/ 1427-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65

0-14/0-14/ 14.5/14.5/ 2-12/2-12/ EasyRET2.0 10 x 4.3-10 17.5/18/18 2-12

1499 x 469 x 206

APE4518R13v06

149

W4

690-960/ 690-960/ 1427-2200/ 1695-2690/ 1695-2690

65/65/65/ 65/65

0-10/0-10/ 16/16/ 2-12/2-12/ EasyRET2.0 10 x 4.3-10 17.5/18/18 2-12

1999 x 469 x 206

APE4518R14v06

152

W4

690-960/ 690-960/ 1427-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65

17/17/ 2-12/217.5/18/ 12/2-12/2- EasyRET2.0 10 x 4.3-10 18 12/2-12

2550 x 469 x 206

APE4518R30v06

155

WW

690-862/ 880-960/ 1427-2200/ 1695-2690/ 1695-2690

65/65/65/ 65/65

2-12/2-12/ 15/15.5/ 2-12/2-12/ EasyRET2.0 10 x 4.3-10 17/18/18 2-12

1999 x 369 x 149

APE4518R17v06

158

W3

690-862/ 880-960/ 1710-2690/ 1710-2690/ 1710-2690

65/65/65/ 65/65

16.5/17/ 0-10/0-10/ 17.5/18/ 0-10/0-10/ EasyRET2.0 10 x 4.3-10 18 0-10

2769 x 359 x 178

APE4518R12v06

161

W2

17/17/ 18/18

10 Ports - 2L3H

Multi-band B - 4 2LnH

Frequency 3dB Horizontal Electrical Tilt Method Connector Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-803/ 824-960/ 1427-2200/ 1695-2690/ 1695-2690

2-12/2-12/ 15/15.5/ 2-12/2-12/ EasyRET2.0 10 x 4.3-10 17/18/18 2-12

1999 x 369 x 149

APE4518R20v06

163

W3

Frequency 3dB Horizontal Electrical Tilt Method Connector Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

65/65/65/ 65/65

12 Ports - 2L4H

617-894/ 617-894/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690 690-960/ 690-960/ 1427-2690/ 1695-2690/ 1695-2200/ 2490-2690 690-960/ 690-960/ 1427-2690/ 1427-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65/65

14/14/ 4-14/4-14/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17.5/17.5 2-12/2-12

1509 x 499 x 206

**ASI4518R45v06

166

/

65/65/65/ 65/65/65

14.5/14.5/ 0-14/0-14/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17/17.5 2-12/2-12

1499 x 469 x 206

ASI4518R31v06

167

W5

65/65/65/ 65/65/65

14.5/14.5/ 2-14/2-14/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17.5/17.5 2-12/2-12

2769 x 449 x 196

**ASI4518R36v06

170

/

690-960/ 690-960/ 1695-2200/ 1695-2200/ 2490-2690/ 2490-2690

65/65/65/ 65/65/65

14.5/14.5/ 0-14/0-14/ 17/17/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17.5/17.5 2-12/2-12

1499 x 429 x 196

ASI4518R14v06

171

X3

690-960/ 690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65/65

16/16/ 0-10/0-10/ 16.5/16.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 16.5/16.5 2-12/2-12

1999 x 429 x 196

ASI4517R3v06

173

Z

690-960/ 690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65/65

17/17/ 0-10/0-10/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17.5/17.5 2-12/2-12

2769 x 429 x 196

ASI4518R10v06

175

Z

** Preliminary Issue

2LnH Band 6-16 Ports

10 Ports - 2L3H

Multi-band B - 4 2LnH 12 Ports - 2L4H Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o) 690-960/ 690-960/ 1427-2690/ 1427-2690/ 1695-2690/ 1695-2690 690-960/ 690-960/ 1427-2690/ 1427-2690/ 1695-2690/ 1695-2690 690-862/ 880-960/ 1427-2690/ 1695-2200/ 2490-2690/ 1695-2690 690-862/ 880-960/ 1427-2690/ 1695-2690/ 1695-2200/ 2490-2690

Dimension(mm)

Model

Page

Array symbol

65/65/65/ 65/65/65

14.5/14.5/ 0-14/0-14/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17.5/17.5 2-12/2-12

1509*469*206

ASI4518R37v06

177

Y3

65/65/65/ 65/65/65

15.5/15.5/ 0-10/0-10/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17.5/17.5 2-12/2-12

2009 x 469 x 206

**ASI4518R39v06

180

Y3

65/65/65/ 65/65/65

14/14.5/ 2-16/2-16/ 17.5/17/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17.5/17.5 2-12/2-12

1499 x 369 x 149

ASI4518R41v06

183

Y2

65/65/65/ 65/65/65

15/15.5/ 2-12/2-12/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17/17.5 2-12/2-12

1999 x 369 x 149

ASI4518R32v06

186

Y2

65/65/65/ 65/65/65

16.5/17/ 0-10/0-10/ 18/18/ 0-10/0-10/ EasyRET2.0 12 x 4.3-10 17.5/17.5 0-10/0-10

2769 x 359 x 178

ASI4518R4v06

189

Y

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

690-960/ 690-960/ 1427-2690/ 2*1695-2200/ 2*2490-2690

7 x 65

14.5/14.5/ 0-14/0-14/ 17.5/17/ 2-12/2-12/ EasyRET2.0 14 x 4.3-10 17/17.5/ 2-12/2-12/ 17.5 2-12

1499 x 469 x 206

AHP4518R3v06

191

/

690-960/ 690-960/ 1427-2690/ 2*1695-2200/ 2*2490-2690

7 x 65

16/16/ 0-10/2-12/ 17.5/17/ 2-12/2-12/ EasyRET2.0 14 x 4.3-10 17/17.5/ 2-12/2-12/ 17.5 2-12

1999 x 469 x 206

AHP4518R4v06

194

/

2*690-960/ 2*1427-1518 3*1695-2690

7 x 65

16/16/ 15.5/15.5/ 17/17/ 17.5

2099 x 449 x 196

AHP4517R7v06

197

Z6

690-862/ 880-960/ 1710-2690/ 1710-2690/ 1710-2690/ 1710-2690

14 Ports - 2L5H

** Preliminary Issue

0-10/0-10/ 2-12/2-12/ 2-12/2-12/ 2-12

EasyRET2.0 14 x 4.3-10

Multi-band B - 4 2LnH

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Downtilt (o) Range (MHz) Beam Width (o)

Dimension(mm)

Model

Page

Array symbol

17/17/ 2-12/2-12/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 14 x 4.3-10 17.5/17.5 2-12/2-12/ /17.5 2-12

2769 x 469 x 206

AHP4518R5v06

200

/

690-960/ 690-960/ 1427-2690/ 4*2490-2690

7 x 65

690-862/ 880-960/ 1427-2690/ 2*1695-2200/ 2*2490-2690

7 x 65

14/14.5/ 17.5/17/ 17/17.5/ 17.5

2-16/2-16/ 2-12/2-12/ 2-12/2-12/ 2-12

14 x 4.3-10

1499 x 369 x 149

AHP4517R1v06

690-862/ 880-960/ 1427-2690/ 2*1695-2200/ 2*2490-2690

7 x 65

15/15.5/ 17.5/17/ 17/17.5/ 17.5

2-12/2-12/ 2-12/2-12/ EasyRET2.0 14 x 4.3-10 2-12/2-12/ 2-12

1999 x 369 x 149

AHP4517R0v07

206

W6

16.5/17/ 2-12/2-12/ 17.5/17.5/ 2-12/2-12/ EasyRET2.0 14 x 4.3-10 17.5/17.5/ 2-12/2-12/ 17.5 2-12

2769 x 369 x 149

AHP4517R2v06

209

Z4

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

2*690-960/ 2*1427-2690 2*1695-2200 2*2490-2690

8 x 65

14.5/14.5/ 17.5/17.5/ 16.5/16.5/ 17/17

0-10/0-10/ 2-12/2-12/ EasyRET2.0 16 x 4.3-10 2-12/2-12/ 2-12/2-12

1509×469×206

AOC4518R7v06

212

/

2*690-960/ 2*1427-2690 2*1695-2200 2*2490-2690

8 x 65

15.5/15.5/ 17.5/17.5/ 16.5/16.5/ 17/17

0-10/0-10/ 2-12/2-12/ EasyRET2.0 16 x 4.3-10 2-12/2-12/ 2-12/2-12

2009 x 469 x 206

AOC4518R4v06

215

/

2*690-960)/ 1427-2690/ 5*1695-2690

8 x 65

17/17/ 17.5/17.5/ 17.5/17.5/ 17.5/17.5

2-12/2-12/ 2-12/2-12/ EasyRET2.0 16 x 4.3-10 2-12/2-12/ 2-12/2-12

2769 x 469 x 206

AOC4518R5v06

218

W8

690-862/ 880-960/ 1427-2690/ 5*1695-2690

8 x 65

16.5/17/ 17.5/17.5/ 17.5/17.5/ 17.5/17.5

2-12/2-12/ 2-12/2-12/ EasyRET2.0 16 x 4.3-10 2-12/2-12/ 2-12/2-12

2769 x 369 x 149

AOC4518R3v06

221

W7

690-862/ 880-960/ 1427-2690/ 4*1695-2690

7 x 65

203

W6

16 Ports - 2L6H

** Preliminary Issue

2LnH Band 6-16 Ports

EasyRET2.0

Multi-band B - 4 2LnH

Array Symbol Type Type KK

Type R

Type S

Type W

Type WW

Type W2

Type W3

Type W4

Type W5

LTy1 yL

y1

yyR

Ly1

Ry2

bLyyL

Ly1

yR

Cy2

Ry3

Ly1

Lr1

r

Rr2

Type K

rr

Type W6

Lr1

Type W7

LTy2 y

CTy4

b1 Ly1 Cy2

r1 r2

Ry3

Type Y3

Ly1

Lr1

Type X3

CLy2 CRy3

Type Y1

Type Y

yLT Ly1

Rr2

Type Z6

Ry4

Rr2

yyyRT

Rr2

r

r1 r2

Type W8

LTy2

CTy4

LBy1

CBy3 RBy5

Lr1

b1

Ry2

Type Z

LTy1

Rr2

Type Z2

RTy3

b1Ly1 Cy2

RTy6

Rr2

rr

LBy2

RBy4

Lr1

Rr2

Lr1

Ry3

Rr2

Type Z4

LTy2 Lb1Ly1

Lg1Ly1 Cy2 Rg2Ry3

Lr1

Ly1

Lr1

Cy2 Rb1Ry3 yyLB yyyyRB

Lr1

Ry2

r1 r2

r1 r2

Rr2

CBy3 RBy5 r1 r2

Type Y2

Lr1

Lb1Ly1 Rb2Ry2

r1 r2

rr

rr

RTy6

Lb1 Ly1Rb2 Cy2 Ry3 LBy1

r

r

Rr2

b1

Ry3

LBy2

RTy5

Cb2 Rb3Ry2 LBy1 r1 r2

Cy3 r1 r2

RBy4

ATR4518R24v06 DXXX-690-960/690-960/1695-2690-65/65/65-14.5i/14.5i/18iM/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

1695 - 2690

824 - 894

880 - 960

Polarization

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45° 0 - 14, continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

13.8

over all Tilts

14.2

14.4

2 - 12, continuously adjustable

14.5

13.7 ±0.5 14.1 ±0.5 14.3 ±0.5 14.4 ±0.5

Side lobe suppression for first side lobe above main beam (dB)

17.2

17.4

18.1

16.8 ±0.5

17.1 ±0.5

17.3 ±0.5

17.9 ±0.5

> 15

> 17

> 17

> 16

> 16

> 16

> 16

> 16

66 ±5

63 ±5

62 ±5

60 ±5

65 ±5

63 ±5

60 ±5

60 ±5

15 .3 ±1.2

14 ±1.1

6.8 ±0.7

5.8 ±0.5

5.3 ±0.4

5.0 ±0.5

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.0

13 .3 ±1.0 12.2 ±0.8

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

2LnH Band 6-16 Ports

Electrical downtilt (°)

≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 25

> 26

> 27

> 27

> 27

Cross polar ratio (dB)

> 16

> 18

> 19

> 20

> 15

> 16

> 17

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

720 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 429 x 196

Packing dimensions (H x W x D) (mm)

1695 x 530 x 270

Antenna weight (kg)

25.5

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

36.9 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 410 (at 150 km/h) Lateral: 245 (at 150 km/h) Maximum: 540 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

1376

50 - 115

Radome material

1499

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

123

ATR4518R24v06 DXXX-690-960/690-960/1695-2690-65/65/65-14.5i/14.5i/18iM/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC < 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Power consumption (W) Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032

(Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx…….y1 HWMxxx……Lr 1 HWMxxx…...Rr 2 r - Red y - Yellow L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

124

1695 - 2690 MHz

ATR4518R25v06 DXXX-690-960/690-960/1695-2690-65/65/65-16i/16i/18i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (690 - 960) Frequency range (MHz)

690 - 803

790 - 862

1695 - 2690

824 - 894

880 - 960

Polarization

+45° , -45° 0 - 10 , continuously adjustable , each band separately

at mid Tilt

15.0

over all Tilts

14.7 ±0.5

Side lobe suppression for first side lobe above main beam (dB)

15.8

16.0

15.3 ±0.5 15.6 ±0.5 15.8 ±0.5

17.0

17.2

17.7

18.1

16.8 ±0.5

17.1 ±0.5

17.5 ±0.5

17.9 ±0.5

> 16

> 17

> 17

> 17

> 16

> 16

> 16

> 16

68 ±5

65 ±5

62 ±5

60 ±5

65 ±5

63 ±5

61 ±5

60 ±5

10.5 ±0.9

9.5 ±0.8

9.2 ±0.7

8.5 ±0.7

6.8 ±0.7

5.8 ±0.5

5.3 ±0.4

5.0 ±0.5

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.5

2 - 12, continuously adjustable

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 25

> 26

> 26

> 26

> 27

> 27

> 28

Cross polar ratio (dB)

> 17

> 18

> 19

> 20

> 15

> 16

> 17

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

2LnH Band 6-16 Ports

Electrical downtilt (°) Gain (dBi)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

250 (at 50℃ ambient temperature)

720 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 429 x 196

Packing dimensions (H x W x D) (mm)

2195 x 530 x 270

Antenna weight (kg)

30.5

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

44.2 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 555 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 735 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

1273

Fiberglass

1999

Radome material

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

125

ATR4518R25v06 DXXX-690-960/690-960/1695-2690-65/65/65-16i/16i/18i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC < 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Power consumption (W) Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx…….y1 HWMxxx……Lr 1 HWMxxx…...Rr 2 r - Red y - Yellow L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

126

1695 - 2690 MHz

ATR4518R26v06 DXXX-690-960/690-960/1695-2690-65/65/65-17i/17i/18i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

1695 - 2690

824 - 894

880 - 960

Polarization

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45° 0 - 10 , continuously adjustable, each band separately

Electrical downtilt (°) at mid Tilt

Gain (dBi)

over all Tilts

15.8 15.5 ±0.5

Side lobe suppression for first side lobe above main beam (dB)

16.7

17

16.3 ±0.5 16.5 ±0.5 16.7 ±0.5

17.0

17.2

17.7

18.1

16.8 ±0.5

17.1 ±0.5

17.5 ±0.5

17.9 ±0.5

> 16

> 17

> 17

> 17

> 16

> 17

> 17

> 16

68 ±5

63 ±5

62 ±5

60 ±5

65 ±5

63 ±5

61 ±5

60 ±5

8.8 ±0.7

8.0 ±0.6

7.8 ±0.5

7.5 ±0.5

6.8 ±0.7

5.8 ±0.5

5.3 ±0.4

5.0 ±0.5

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.4

2 - 12, continuously adjustable

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 25

> 26

> 26

> 25

> 26

> 27

> 28

Cross polar ratio (dB)

> 17

> 18

> 19

> 20

> 15

> 16

> 17

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

2LnH Band 6-16 Ports

VSWR

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2550 x 429 x 196

Packing dimensions (H x W x D) (mm)

2770 x 530 x 275

Antenna weight (kg)

106

36.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

58.0 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 735 (at 150 km/h) Lateral: 450 (at 150 km/h) Maximum: 965 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1787 2550

Mast diameter supported (mm)

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

127

ATR4518R26v06 DXXX-690-960/690-960/1695-2690-65/65/65-17i/17i/18i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC < 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Power consumption (W) Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx…….y1 HWMxxx……Lr1 HWMxxx…...Rr2 r - Red L - Left array

Pattern sample for reference

690 - 960 MHz

128

1695 - 2690 MHz

y - Yellow R - Right array

ATR4517R5v06 DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.5i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 820

880 - 960

790 - 862

1710 - 2690

880 - 960

1710 - 1990

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45° 0 - 12 , continuously adjustable , each band separately

Electrical downtilt (°) at mid Tilt

Gain (dBi)

over all Tilts

13.8

13.8

14.3

16.8

17.0

17.2

17.5

13.7 ±0.3

13.7 ±0.3

14.1 ±0.5

16.6 ±0.4

16.8 ±0.4

17.1 ±0.4

17.4 ±0.4

> 16

> 16

> 17

> 15

> 15

> 15

> 15

69 ±2.0

66 ±2.0

63 ±2.0

63 ±5.0

61 ±5.0

60 ±5.0

60 ±5.0

15.3 ±1.0

13.5 ±1.0

12.0 ±1.0

6.5 ±0.5

6.0 ±0.5

5.2 ±0.3

4.8 ±0.3

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable

< 1.5 ≥ 28

Cross polar isolation (dB)

2LnH Band 6-16 Ports

VSWR

≥ 28 ≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 28 (690 - 862 // 1710 - 2690 MHz) ≥ 28 (880 - 960 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 28

> 28

> 26

> 27

> 27

> 27

> 28

Cross polar ratio (dB)

> 25

> 22

> 18

> 17

> 17

> 20

> 19

0°

Max. power per input (W)

300 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1490 x 298 x 150

Packing dimensions (H x W x D) (mm)

1835 x 360 x 225

Antenna weight (kg)

20.3

Clamps weight (kg)

3.0 (2 units) 30.0 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1490

Mast diameter supported (mm)

1389

Antenna packing weight (kg)

Frontal: 460 (at 150 km/h) Lateral: 205 (at 150 km/h) Maximum: 615 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

129

ATR4517R5v06 DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.5i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

Lightning protection (kA)

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……r HWMxxx……y HWMxxx……rr r - Red

y - Yellow

Pattern sample for reference

690 - 862 MHz

130

880 - 960 MHz

1710 - 2690 MHz

ATR4518R2v06 DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18i-M/M/M-R EasyRET 2L1H Antenna with 3 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties Frequency range (MHz)

790 - 862

1710 - 2690

880 - 960

1710 - 1990

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

15.0

15.4

17.8

18.0

18.0

18.0

15.0 ±0.4

15.3 ±0.3

17.5 ±0.5

17.9 ±0.3

17.9 ±0.4

17.8 ±0.5

> 16

> 16

> 16

> 17

> 17

> 16

68 ±2.0

65 ±2.0

61 ±3.0

60 ±3.0

60 ±5.0

61 ±5.0

10.1 ±0.8

9.9 ±0.8

6.0 ±0.4

5.4 ±0.4

4.6 ±0.3

4.3 ±0.3

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

< 1.5 ≥ 28

Cross polar isolation (dB)

≥ 28 (790 - 862 // 880 - 960 MHz) ≥ 30 (790 - 960 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 26

> 26

> 27

> 27

> 26

> 26

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 18

> 18

0°

500 (at 50℃ ambient temperature)

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

2020 x 298 x 150

Packing dimensions (H x W x D) (mm)

2365 x 360 x 230

Antenna weight (kg)

25.3

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

37.3 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1913

50 - 115

2020

Mast diameter supported (mm)

-40 .. +65 Frontal: 650 (at 150 km/h) Lateral: 290 (at 150 km/h) Maximum: 870 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

131

2LnH Band 6-16 Ports

VSWR

ATR4518R2v06 DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18i-M/M/M-R EasyRET 2L1H Antenna with 3 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx….r HWMxxx…rr HWMxxx….y r - Red

y - Yellow

Pattern sample for reference

790 - 862 MHz

132

880 - 960 MHz

1710 - 2690 MHz

ATR4518R12v06 DXXX-790-862/880-960/1710-2690-65/65/65-16.5i/17i/18i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties Frequency range (MHz)

790 - 862

1710 - 2690

880 - 960

1710 - 1990

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

over all Tilts

15.9

16.3

17.8

18.0

18.0

18.0

15.8 ±0.4

16.1 ±0.5

17.5 ±0.5

17.8 ±0.4

17.8 ±0.4

17.8 ±0.4

> 16

> 16

> 16

> 17

> 17

> 16

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)

67 ±2.0

64 ±2.0

61 ±4.0

60 ±4.0

60 ±4.0

61 ±5.0

Vertical 3dB beam width (°)

8.5 ±0.7

7.5 ±0.7

6.0 ±0.5

5.4 ±0.4

4.6 ±0.3

4.3 ±0.3

≥ 28

≥ 28

VSWR

< 1.5 ≥ 28

2LnH Band 6-16 Ports

Cross polar isolation (dB)

≥ 28 (790 - 862 // 880 - 960 MHz) ≥ 30 (790 - 960 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 28

> 28

> 28

> 28

> 28

> 28

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 18

> 18

0°

500 (at 50℃ ambient temperature)

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2520 x 298 x 150

Packing dimensions (H x W x D) (mm)

2885 x 365 x 235

Antenna weight (kg)

29.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

44.0 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1913

50 - 115

-40 .. +65 Frontal: 840 (at 150 km/h) Lateral: 375 (at 150 km/h) Maximum: 1125 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

2520

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 8 °

2.1 kg

1 (Separate packing)

133

ATR4518R12v06 DXXX-790-862/880-960/1710-2690-65/65/65-16.5i/17i/18i-M/M/M-R EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx….r HWMxxx…rr HWMxxx….y r - Red

y - Yellow

Pattern sample for reference

790 - 862 MHz

134

880 - 960 MHz

1710 - 2690 MHz

AQU4518R37v06 DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/6514.5i/14.5i/17.5i/17.5i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with Integrated RCUs - 1.5m Preliminary Issue Electrical Properties Frequency range (MHz)

2 x (1427 - 2690)

2 x (690 - 960)

1427 - 1518

1695 - 2690

Electrical downtilt (°)

0 - 14

2 - 12

Gain (dBi)

14.5

15

17.5

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

15

16

16

Horizontal 3dB beam width (°)

68

68

65

Vertical 3dB beam width (°)

13

8

6.5

< 1.5

Front to back ratio, copolar (dB)

Typ. 25

Typ. 25

Cross polar ratio (dB)

Typ. 17

Typ. 17

0°

2LnH Band 6-16 Ports

VSWR

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 469 x 206

Packing dimensions (H x W x D) (mm)

1755 x 535 x 285

Antenna net weight (kg)

31

Mechanical downtilt (°)

0 - 16

Connector

8 x 4.3-10 Female

RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

135

AQU4518R36v06 DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/6516i/16i/17.5i/17.5i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with Integrated RCUs - 2.0m Preliminary Issue Electrical Properties Frequency range (MHz)

2 x (1427 - 2690)

2 x (690 - 960)

Electrical downtilt (°)

1427 - 1518

0 - 10

1695 - 2690 2 - 12

Gain (dBi)

16

16

17.5

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

15

15

16

Horizontal 3dB beam width (°)

68

68

65

Vertical 3dB beam width (°)

9.5

8

6

VSWR

< 1.5

Front to back ratio, copolar (dB)

Typ. 25

Cross polar ratio (dB)

Typ. 17

0°

Typ. 25 Typ. 17 ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2099 x 449 x 196

Packing dimensions (H x W x D) (mm)

2255 x 515 x 275

Antenna net weight (kg) Mechanical downtilt (°) Connector

36.0 0 - 12 8 x 4.3-10 Female

RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

136

AQU4518R23v06 DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6514.5i/14.5i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

880 - 960

Polarization

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45° 0 - 14, continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

13.8

over all Tilts

14.4

14.5

13.7 ±0.5 14.1 ±0.5 14.3 ±0.5 14.4 ±0.5

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

14.2

2 - 12, continuously adjustable, each band separately 17.0

17.2

17.4

18.1

16.8 ±0.5

17.1 ±0.5

17.3 ±0.5

17.9 ±0.5

> 15

> 17

> 17

> 16

> 16

> 16

> 16

> 16

66 ±5

63 ±5

62 ±5

60 ±5

65 ±5

63 ±5

60 ±5

60 ±5

6.8 ±0.7

5.8 ±0.5

5.3 ±0.4

5.0 ±0.5

15.3 ±1.2 14.0 ±1.1 13.3 ±1.0 12.2 ±0.8

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 25

> 26

> 27

> 27

> 27

Cross polar ratio (dB)

> 16

> 18

> 19

> 20

> 15

> 16

> 17

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

2LnH Band 6-16 Ports

Electrical downtilt (°)

250 (at 50℃ ambient temperature)

960 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 429 x 196

Packing dimensions (H x W x D) (mm)

1695 x 530 x 270

Antenna weight (kg)

27.8

Clamps weight (kg)

3.6 (2 units) 39.2 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1499

Radome material

1310

Antenna packing weight (kg)

106

-40 .. +65 Frontal: 410 (at 150 km/h) Lateral: 245 (at 150 km/h) Maximum: 540 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

137

AQU4518R23v06 DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6514.5i/14.5i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……Lr1 HWMxxx…...Rr2

Ly1

Ry2

Lr1

Rr2

HWMxxx…...Ry2 r - Red y - Yellow L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

138

1695 - 2690 MHz

AQU4518R24v06 DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

880 - 960

Polarization

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45° 0 - 10 , continuously adjustable, each band separately

at mid Tilt

Gain (dBi)

15.0

over all Tilts

14.7 ±0.5

Side lobe suppression for first side lobe above main beam (dB)

15.8

16.0

15.3 ±0.5 15.6 ±0.5 15.8 ±0.5

17.0

17.2

17.7

18.1

16.8 ±0.5

17.1 ±0.5

17.5 ±0.5

17.9±0.5

> 16

> 17

> 17

> 17

> 16

> 16

> 16

> 16

68 ±5

65 ±5

62 ±5

60 ±5

65 ±5

63 ±5

61 ±5

60 ±5

10.5 ±0.9

9.5 ±0.8

9.2 ±0.7

8.5 ±0.7

6.8 ±0.7

5.8 ±0.5

5.3 ±0.4

5.0 ±0.5

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.5

2 - 12, continuously adjustable, each band separately

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

2LnH Band 6-16 Ports

Electrical downtilt (°)

≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 23

> 25

> 26

> 26

> 26

> 27

> 27

> 28

Cross polar ratio (dB)

> 17

> 18

> 19

> 20

> 15

> 16

> 17

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

960 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1999 x 429 x 196

Packing dimensions (H x W x D) (mm)

2195 x 530 x 270

Antenna weight (kg)

32.2

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

45.9 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1999

Radome material

1273

Mast diameter supported (mm)

Frontal: 555 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 735 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

139

AQU4518R24v06 DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……Lr 1 HWMxxx…...Rr 2

Ly1

Ry2

Lr1

Rr2

HWMxxx…...Ry2 r - Red y - Yellow L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

140

1695 - 2690 MHz

AQU4518R25v06 DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 2 x (690 - 960) Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

1695 1990

880 - 960

2200 2490

2490 2690

+45° , -45° 0 - 10, continuously adjustable, each band separately

Electrical downtilt (°) at mid Tilt

Gain (dBi)

over all Tilts

15.8 15.5 ±0.5

Side lobe suppression for first side lobe above main beam (dB)

> 16

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.4

16.7

2 - 12, continuously adjustable, each band separately

17.0

16.3 ±0.5 16.5 ±0.5 16.7 ±0.5 > 17

> 17

17.0

17.2

17.7

18.1

16.8 ±0.5

17.1 ±0.5

17.5 ±0.5

17.9 ±0.5

> 16

> 16

> 16

> 16

> 17

68 ±5

65 ±5

60 ±5

58 ±5

65 ±5

63 ±5

61 ±5

60 ±5

8.8 ±0.7

8.0 ±0.6

7.8 ±0.5

7.5 ±0.5

6.8 ±0.7

5.8 ±0.5

5.3 ±0.4

5.0 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 25

> 26

> 26

> 26

> 26

> 27

> 27

> 28

Cross polar ratio (dB)

> 17

> 18

> 19

> 20

> 15

> 16

> 17

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

960 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

2550 x 429 x 196

Packing dimensions (H x W x D) (mm)

2770 x 530 x 275

Antenna weight (kg)

37.4

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

58.9 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1787

50 - 115

Radome material

2550

Mast diameter supported (mm)

Frontal: 735 (at 150 km/h) Lateral: 450 (at 150 km/h) Maximum: 965 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0-8°

3.1 kg

1 (Separate packing)

141

2LnH Band 6-16 Ports

Polarization

1920 2200

AQU4518R25v06 DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……Lr 1 HWMxxx…...Rr 2

Ly1

Ry2

Lr1

Rr2

HWMxxx…...Ry2 r - Red y - Yellow L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

142

1695 - 2690 MHz

AQU4517R4v06 DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

2 x (1710 - 2690)

880 - 960

790 - 862

1710 - 1990

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45° 0 - 12 , continuously adjustable, each band separately

Electrical downtilt (°) at mid Tilt

0 - 10 , continuously adjustable, each band separately

13.8

13.9

14.2

17.4

17.8

18.2

18.3

14.0 ±0.5

14.1 ±0.3

14.3 ±0.3

17.3 ±0.5

17.7 ±0.5

18.1 ±0.5

18.2 ±0.4

Side lobe suppression for first side lobe above main beam (dB)

> 16

> 16

> 15

> 18

> 18

> 18

> 18

Horizontal 3dB beam width (°)

66 ±1.7

64 ±2.6

64 ±3.5

65 ±3.9

63 ±3.3

62 ±4.8

60 ±4.5

15.2 ±2.3

13.3 ±1.8

11.8 ±2.0

7.1 ±0.6

6.5 ±0.5

5.8 ±0.5

5.2 ±0.3

Gain (dBi)

over all Tilts

Vertical 3dB beam width (°) VSWR

< 1.5 ≥ 28

≥ 28

2LnH Band 6-16 Ports

≥ 28

Cross polar isolation (dB)

≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 30 (690 - 862 // 1710 - 2690 MHz) ≥ 30 (880 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 25

> 25

> 25

> 30

> 28

> 28

> 28

Cross polar ratio (dB)

> 18

> 20

> 20

> 19

> 19

> 20

> 20

0°

Max. power per input (W)

300 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

700 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1499 x 359 x 178

Packing dimensions (H x W x D) (mm)

1880 x 425 x 255 26.5

Bracket weight (kg)

3.6 (2 units)

Packing weight (kg)

40.3 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1499

Radome material

1347

Antenna net weight (kg)

Frontal : 475 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 495 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16°

2.1 kg

1 (Separate packing)

143

AQU4517R4v06 DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx…...yL HWMxxx……r HWMxxx…..rr

yL

yyR

HWMxxx...yyR r - Red L - Left array

y - Yellow R - Right array

r

rr

Pattern sample for reference

790 - 862 MHz

144

880 - 960 MHz

1710 - 2690 MHz

AQU4518R30v07 DXXXX-690-862/880-960/1695-2690/1695-2690-65/65/65/6515.5i/16i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

880 - 960

790 - 862

Polarization

2 x (1695 - 2690) 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 +45° , -45°

0 - 10 , continuously adjustable , each band separately

at mid tilt

Gain (dBi)

over all tilts

14.9

15.2

15.6

17.2

17.5

17.9

18.0

14.9 ±0.5

15.0 ±0.5

15.5 ±0.3

17.1 ±0.4

17.4 ±0.5

17.8 ±0.5

17.9 ±0.4

> 15

> 15

> 16

> 15

> 15

> 16

> 16

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

69 ±5

67 ±5

64 ±5

64 ±5

62 ±5

61 ±5

60 ±5

11.2 ±0.8

10.0 ±0.7

8.7 ±0.6

6.3 ±0.5

5.7 ±0.4

5.0 ±0.5

4.6 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 30 (690 - 862 // 1695 - 2690 MHz) ≥ 30 (880 - 960 // 1695 - 2690 MHz) ≥ 30 (1695 - 2690 // 1695 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 26

> 27

> 27

> 25

> 26

> 26

> 26

Cross polar ratio (dB)

> 17

> 16

> 16

> 18

> 18

> 18

> 18

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

700 (at 50℃ ambient temperature) ≥ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

50

Impedance (Ω) Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 349 x 166

Packing dimensions (H x W x D) (mm)

2350 x 415 x 240

Antenna weight (kg)

25.7

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

38 (included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1310 1999

Mast diameter supported (mm)

Frontal: 630 (at 150 km/h) Lateral: 180 (at 150 km/h) Maximum: 665 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

145

2LnH Band 6-16 Ports

Electrical downtilt (°)

AQU4518R30v07 DXXXX-690-862/880-960/1695-2690/1695-2690-65/65/65/6515.5i/16i/18i/18i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx…..Ly1 HWMxxx….…r1 HWMxxx….....r2 HWMxxx......Ry2 r - Red L - Left array

Ly1

y - Yellow R - Right array

Ry2 r1 r2

Pattern sample for reference

690 - 862 MHz

146

880 - 960 MHz

1695 - 2690 MHz

AQU4518R19v06 DXXXX-690-803/824-960/1710-2690/1710-2690-65/65/65/65-14i/14.5i/ 17.5i/17.5i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties Frequency range (MHz)

690 - 803

824 - 960 824 - 894

2 x (1710 - 2690)

880 - 960

Polarization

1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 +45° , -45°

0 - 12 , continuously adjustable , each band separately

Electrical downtilt (°) at mid Tilt

Gain (dBi)

over all Tilts

13.8

13.9

14.2

17.4

17.8

18.2

18.3

14.0 ±0.5

14.1 ±0.3

14.3 ±0.3

17.3 ±0.5

17.7 ±0.5

18.1 ±0.5

18.2 ±0.4

> 16

> 16

> 15

> 18

> 18

> 18

> 18

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

0 - 10 , continuously adjustable , each band separately

66 ±1.7

65 ±2.3

64 ±3.5

65 ±3.9

63 ±3.3

62 ±4.8

60 ±4.5

15.2 ±2.3

12.8 ±2.0

11.8 ±2.0

7.1 ±0.6

6.5 ±0.5

5.8 ±0.5

5.2 ±0.3

VSWR

< 1.5 ≥ 28

≥ 28

2LnH Band 6-16 Ports

≥ 28

Cross polar isolation (dB)

≥ 28 (690 - 803 // 824 - 960 MHz) ≥ 30 (690 - 803 // 1710 - 2690 MHz) ≥ 30 (824 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 25

> 25

> 25

> 30

> 28

> 28

> 28

Cross polar ratio (dB)

> 18

> 18

> 20

> 19

> 19

> 20

> 20

0°

Max. power per input (W)

300 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

700 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

1499 x 359 x 178

Packing dimensions (H x W x D) (mm)

1880 x 425 x 250

Antenna weight (kg)

27.4

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

41.1 (included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1499

Antenna dimensions (H x W x D) (mm)

1347

Mechanical Properties

-40 .. +65 Frontal : 475 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 495 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

147

AQU4518R19v06 DXXXX-690-803/824-960/1710-2690/1710-2690-65/65/65/65-14i/14.5i/ 17.5i/17.5i-M/M/M/M-R EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx…..yL HWMxxx…….r yL

HWMxxx……rr

yyR

HWMxxx…yyR r - Red L - Left array

y - Yellow R - Right array

r

Pattern sample for reference

690 - 803 MHz

148

824 - 960 MHz

1710 - 2690 MHz

rr

APE4518R13v06 DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

Electrical downtilt (°)

+45° , -45°

+45° , -45°

0 - 14 , continuously adjustable , each band separately

2 - 12 , continuously adjustable

13.7

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°)

14.3

14.6

14.8

13.6 ±0.5 14.2 ±0.5 14.5 ±0.5 14.7 ±0.5

16.2

17.4

17.8

18.1

18.1

16.1 ±0.5

17.3 ±0.5

17.7 ±0.5

18.0 ±0.5

18.0 ±0.5

> 15

> 17

> 17

> 17

> 15

> 16

> 16

> 17

> 17

70 ±5

70 ±4

69 ±4

65 ±4

62 ±7

61 ±7

60 ±6

58 ±5

58 ±5

6.4 ±0.5

5.8 ±0.5

5.1 ±0.3

4.7 ±0.3

15 .4 ±1.5 13.8 ±0.9 13 .3 ±0.7 12.1 ±0.7 7.9 ±0.5

Vertical 3dB beam width (°) VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB) Cross polar ratio (dB)

0°

Max. power per input (W) Intermodulation IM3 (dBc)

> 22

> 23

> 24

> 24

> 25

> 28

> 28

> 28

> 26

> 18

> 20

> 23

> 23

> 15

> 18

> 18

> 16

> 15

500 (at 50℃ ambient temperature)*

300 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2200 - 2490

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.4

17.8

18.0

18.0

17.3 ±0.5

17.7 ±0.5

17.9 ±0.5

17.9 ±0.5

> 15

> 17

> 17

> 17

62 ±6

60 ±6

58 ±5

58 ±4

6.5 ±0.5

5.6 ±0.3

5.2 ±0.2

4.7 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 26

> 26

> 26

> 26

Cross polar ratio (dB)

> 19

> 19

> 20

> 17

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

149

2LnH Band 6-16 Ports

Polarization

Gain (dBi)

1427 - 2690

690 - 803 790 - 862 824 - 894 880 - 960 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

APE4518R13v06 DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1499 x 469 x 206

Packing dimensions (H x W x D) (mm)

1870 x 535 x 285

Antenna weight (kg)

33.1

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

50.4 (Included clamps)

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1383

50 - 115 Fiberglass

Frontal: 440 (at 150 km/h) Lateral: 265 (at 150 km/h) Maximum: 585 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 16 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

150

1427 - 2690 MHz

1695 - 2690 MHz

1499

Mast diameter supported (mm) Radome material

APE4518R13v06 DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr 1 HWMxxx……Ly1 HWMxxx……Cy2

Ly1

Cy2

Ry3

HWMxxx……Ry3 HWMxxx……Rr 2

Lr1

Rr2

r - Red y - Yellow L - Left array C - Center array R - Right array

151

2LnH Band 6-16 Ports

Pin assignment according AISG

APE4518R14v06 DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

Polarization Electrical downtilt (°) Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

1427 - 2200

824 - 894

880 - 960

1427 - 1518 1695 - 1990 1920 - 2200

+45° , -45°

+45° , -45°

0 - 10 , continuously adjustable , each band separately

2 - 12 , continuously adjustable

14.8

15.4

15.7

16.0

16.0

17.3

17.4

14.7 ±0.4

15.3 ±0.4

15.5 ±0.3

15.8 ±0.4

15.8 ±0.6

17.2 ±0.4

17.3 ±0.5

> 17

> 17

> 17

> 17

> 15

> 16

> 16

70 ±5

69 ±4

68 ±3

64 ±4

63 ±7

64 ±7

65 ±6

11.0 ±0.8

9.8 ±0.5

9.5 ±0.5

8.8 ±0.5

7.9 ±0.3

6.3 ±0.5

5.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 24

Cross polar ratio (dB)

> 20

0°

Max. power per input (W) Intermodulation IM3 (dBc)

> 25

> 25

> 25

> 20

> 20

> 21

> 25

> 27

> 27

> 16

> 18

> 18

500 (at 50℃ ambient temperature)*

300 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2200 - 2490

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.0

17.5

17.6

18.0

16.9 ±0.6

17.4 ±0.5

17.5 ±0.5

17.9 ±0.5

> 18

> 19

> 19

> 18

63 ±6

61 ±6

60 ±6

60 ±6

7.4 ±0.7

6.6 ±0.6

5.8 ±0.3

5.3 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 27

> 27

> 27

Cross polar ratio (dB)

> 18

> 18

> 17

> 18

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

152

APE4518R14v06 DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 469 x 206

Packing dimensions (H x W x D) (mm)

2255 x 535 x 285

Antenna weight (kg)

144

38.9

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

60.0 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1420

50 - 115

1999

Mast diameter supported (mm)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2LnH Band 6-16 Ports

Frontal: 600 (at 150 km/h) Lateral: 365 (at 150 km/h) Maximum: 795 (at 150 km/h)

Wind load (N)

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1427 - 2200 MHz

1695 - 2690 MHz

153

APE4518R14v06 DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m

Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr 1 HWMxxx……Ly1

Ly1

b1

Ry2

HWMxxx…….b 1 HWMxxx……Ry2 HWMxxx……Rr 2 r - Red y – Yellow b - Blue L - Left array R - Right array

154

Lr1

Rr2

APE4518R30v06 DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-17i/17i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m

APE4518R30v06

Antenna Specifications Electrical Properties 2 x (690 - 960) Frequency range (MHz)

690 - 803

790 - 862

Polarization Electrical downtilt (°) at mid Tilt

824 - 894

880 - 960 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

+45° , -45°

2 - 12 , continuously adjustable , each band separately

2 - 12 , continuously adjustable

15.8

16.4

16.7

17.0

16.2

17.3

17.4

17.9

18.0

over all Tilts 15.6 ±0.5 16.3 ±0.5 16.5 ±0.5 16.7 ±0.5 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

>15

>15

>16

>16

> 15

> 16

> 16

> 17

> 17

70 ±5

69 ±4

68 ±3

64 ±4

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

9.0 ±0.5

8.0 ±0.4

7.7 ±0.5

7.2 ±0.4

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 25

> 25

> 28

> 28

> 28

> 28

Cross polar ratio (dB)

> 20

> 24

> 24

> 24

> 15

> 18

> 16

> 16

> 15

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2200 - 2490

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.0

17.5

17.6

18.0

16.9 ±0.6

17.4 ±0.5

17.5 ±0.5

17.9 ±0.5

> 16

> 16

> 18

> 17

62 ±5

60 ±5

58 ±4

58 ±4

6.5 ±0.5

5.6 ±0.4

5.2 ±0.2

4.8 ±0.3

> 27

> 27

> 27

> 20

> 19

> 18

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 27

Cross polar ratio (dB)

> 22

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

155

2LnH Band 6-16 Ports

Gain (dBi)

1427 - 2690

APE4518R30v06 DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-17i/17i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m

Mechanical Properties

144

Antenna dimensions (H x W x D) (mm)

2550 x 469 x 206

Packing dimensions (H x W x D) (mm)

2805 x 535 x 285

Antenna weight (kg)

44.0

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

67.5 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 780 (at 150 km/h) Lateral: 485 (at 150 km/h) Maximum: 1035 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1873 2550

Mast diameter supported (mm)

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

156

1427 - 2690 MHz

1695 - 2690 MHz

APE4518R30v06 DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-17i/17i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr1 HWMxxx……Ly1

Ly1

Cy2

Ry3

HWMxxx……Cy2 HWMxxx……Ry3 HWMxxx……Rr2

Lr1

Rr2

r - Red y - Yellow L - Left array R - Right array C - Center array

157

2LnH Band 6-16 Ports

Pin assignment according AISG

APE4518R17v06 DXXXXX-690-862/880-960/1427-2200/1695-2690/1695-269065/65/65/65/65-15i/15.5i/17i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

790 - 862

Polarization

1427 - 1518

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1427 - 2200

880 - 960

1695 - 1990 +45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.0

15.5

15.9

16.1

17.3

17.4

14.9 ±0.5

15.3 ±0.5

15.6 ±0.5

16.0 ±0.5

17.2 ±0.5

17.3 ±0.5

> 15

> 15

> 16

> 17

> 16

> 17

67 ±2.0

65 ±2.2

61 ±2.5

64 ±5.0

68 ±4.0

65 ±4.0

11.6 ±1.0

10.4 ±0.5

9.0 ±0.4

8.3 ±0.4

6.8 ±0.6

6.1 ±0.5

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB) Cross polar ratio (dB)

1920 - 2200

0°

Max. power per input (W) Intermodulation IM3 (dBc)

> 23

> 26

> 26

> 21

> 21

> 20

> 24

> 26

> 26

> 15

> 20

> 20

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2200 - 2490

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

17.4

17.7

18.1

18.4

17.2 ±0.5

17.6 ±0.5

17.9 ±0.4

18.2 ±0.5

> 19

> 19

> 18

> 18

Horizontal 3dB beam width (°)

67 ±5.0

65 ±3.0

62 ±2.0

59 ±4.0

Vertical 3dB beam width (°)

6.6 ±0.5

6.0 ±0.5

5.2 ±0.4

5.0 ±0.4

> 25

> 26

> 26

> 19

> 17

> 17

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 25

Cross polar ratio (dB)

> 19

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

158

APE4518R17v06 DXXXXX-690-862/880-960/1427-2200/1695-2690/1695-269065/65/65/65/65-15i/15.5i/17i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1999 x 369 x 149

Packing dimensions (H x W x D) (mm)

2265 x 435 x 240

Antenna weight (kg)

32.3

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

45.0 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1310

50 - 115

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2LnH Band 6-16 Ports

Frontal: 580 (at 150 km/h) Lateral: 195 (at 150 km/h) Maximum: 700 (at 150 km/h)

Wind load (N)

1999

Mast diameter supported (mm)

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

880 - 960 MHz

1427 - 2200 MHz

1695 - 2690 MHz

159

APE4518R17v06 DXXXXX-690-862/880-960/1427-2200/1695-2690/1695-269065/65/65/65/65-15i/15.5i/17i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……..b1 HWMxxx……..r1

Ly1

b1

HWMxxx……..r2 HWMxxx...…Ry2 r - Red b - Blue L - Left array

160

y - Yellow R - Right array

r1 r2

Ry2

APE4518R12v06 DXXXXX-690-862/880-960/1710-2690/1710-2690/1710-269065/65/65/65/65-16.5i/17i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

880 - 960

790 - 862

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45° 0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts Bottom

16.2

16.5

16.9

16.0 ±0.5

16.3 ±0.5

16.8 ±0.6

at mid Tilt over all Tilts

17.3

17.4

17.6

18.1

17.2 ±0.5

17.4 ±0.5

17.5 ±0.6

18.0 ±0.6

at mid Tilt

Top

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

> 20

> 18

16.9

17.2

17.4

17.5

16.8 ±0.5

17.1 ±0.3

17.2 ±0.5

17.5 ±0.5

> 20

> 20

> 19

> 19

> 17

Horizontal 3dB beam width (°)

66 ±2.7

65 ±2.9

63 ±4.1

66 ±4.7

63 ±3.3

61 ±5.2

60 ±4.4

Vertical 3dB beam width (°)

8.6 ±1.1

7.4 ±0.9

6.5 ±0.6

7.6 ±0.6

6.8 ±0.5

6.1 ±0.5

5.6 ±0.2

VSWR

2LnH Band 6-16 Ports

Electrical downtilt (°)

Gain (dBi)

3 x (1710 - 2690) 1710 - 1990

< 1.5 ≥ 28

Cross polar isolation (dB)

≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)

≥ 28

≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 30 (690 - 862 // 1710 - 2690 MHz) ≥ 30 (880 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz) 0°

Max. power per input (W)

> 25

> 27

> 26

> 30

> 30

> 27

> 27

> 18

> 22

> 22

> 19

> 19

> 21

> 20

400 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

1000 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 359 x 178

Packing dimensions (H x W x D) (mm)

2980 x 425 x 255

Antenna weight (kg)

42.9

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

61.4 (included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 945 (at 150 km/h) Lateral: 285 (at 150 km/h) Maximum: 995 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

1862

50 - 115

Radome material

2769

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0-8°

3.1 kg

1 (Separate packing)

161

APE4518R12v06 DXXXXX-690-862/880-960/1710-2690/1710-2690/1710-269065/65/65/65/65-16.5i/17i/17.5i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……LTy1

LTy1

HWMxxx……LBy2 HWMxxx……….r1 LBy2

HWMxxx……….r2 HWMxxx……..Ry3 r - Red L - Left array T - Top array

Ry3

r1

y - Yellow R - Right array B - Bottom array

Pattern sample for reference

690 - 862 MHz

162

880 - 960 MHz

1710 - 2690 MHz

1710 - 2690 MHz

(Bottom)

(Top)

r2

APE4518R20v06 DXXXXX-690-803/824-960/1427-2200/1695-2690/1695-269065/65/65/65/65-15i/15.5i/17i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 824 - 960

690 - 803

824 - 894

Polarization Electrical downtilt (°) Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

1427 - 2200

880 - 960

1427 - 1518

1695 - 1990

1920 - 2200

+45° , -45°

+45° , -45°

2 - 12 , continuously adjustable

2 - 12 , continuously adjustable

14.9

15.2

15.5

16.0

17.0

17.3

14.8 ±0.5

15.1 ±0.5

15.4 ±0.5

15.9 ±0.5

16.8 ±0.5

17.0 ±0.5

> 16

> 15

> 15

> 17

> 16

> 16

67 ±2.0

65 ±2.2

63 ±2.5

64 ±5.0

67 ±4.0

65 ±4.0

11.0 ±1.0

9.5 ±0.5

8.9 ±0.4

8.3 ±0.4

6.8 ±0.6

6.1 ±0.5

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 26

> 26

> 24

> 26

> 26

Cross polar ratio (dB)

> 19

> 18

> 17

> 15

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2200 - 2490

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

17.2

17.5

18.0

18.4

17.0 ±0.5

17.4 ±0.5

17.8 ±0.4

18.1 ±0.5

> 17

> 17

> 17

> 16

Horizontal 3dB beam width (°)

67 ±5.0

65 ±3.0

62 ±2.0

59 ±4.0

Vertical 3dB beam width (°)

6.6 ±0.5

6.0 ±0.5

5.2 ±0.4

5.0 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 25

> 26

> 26

Cross polar ratio (dB)

> 19

> 19

> 17

> 17

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

163

2LnH Band 6-16 Ports

Frequency range (MHz)

APE4518R20v06 DXXXXX-690-803/824-960/1427-2200/1695-2690/1695-269065/65/65/65/65-15i/15.5i/17i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 369 x 149

Packing dimensions (H x W x D) (mm)

2265 x 435 x 240

Antenna weight (kg)

32.7

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

47.5 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1999

Radome material

1310

Mast diameter supported (mm)

Frontal: 580 (at 150 km/h) Lateral: 195 (at 150 km/h) Maximum: 700 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

164

690 - 803 MHz

824 - 960 MHz

1427 - 2200 MHz

1695 - 2690 MHz

APE4518R20v06 DXXXXX-690-803/824-960/1427-2200/1695-2690/1695-269065/65/65/65/65-15i/15.5i/17i/18i/18i-M/M/M/M/M-R EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m Integrated RET Specifications

RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……..b1

Ly1

b1

Ry2

HWMxxx……..r1 HWMxxx……..r2 HWMxxx...…Ry2 r - Red b - Blue L - Left array

r1 r2

y - Yellow R - Right array

165

2LnH Band 6-16 Ports

Properties

ASI4518R45v06 DXXXXXX-617-894/617-894/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-14i/14i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with Integrated RCUs - 1.5m Preliminary Issue Electrical Properties 2 x (617 - 894)

Frequency range (MHz)

617 - 698

698 - 798

Electrical downtilt (°)

4 x (1695 - 2690) 814 - 894

1695 - 2200

4 - 14

Gain (dBi)

13

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12

13.5

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

2300 - 2690

14

16.5

16

17.5 16

69

66

63

67

60

17.5

15

13.5

7

5.5

VSWR

< 1.5

Front to back ratio, copolar (dB)

Typ. 22

Typ. 25

Cross polar ratio (dB)

Typ. 17

Typ. 17

0°

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1509 x 499 x 206

Packing dimensions (H x W x D) (mm)

1880 x 570 x 285

Antenna net weight (kg)

39

Mechanical downtilt (°)

0 - 16

Connector

12 x 4.3-10 Female

RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

166

ASI4518R31v06 DXXXXXX-690-960/690-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-14.5i/14.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

824 - 894

1695 - 2690 880 - 960

Polarization

+45° , -45° 0 - 14 , continuously adjustable , each band separately

Electrical downtilt (°) at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable

13.7

14.3

14.6

14.8

17.0

17.5

17.6

18.0

13.6 ±0.5

14.2 ±0.5

14.5 ±0.5

14.7 ±0.5

16.9 ±0.6

17.4 ±0.5

17.5 ±0.5

17.9 ±0.5

> 17

> 17

> 17

> 17

> 16

> 16

> 18

> 17

70 ±5

70 ±4

69 ±4

65 ±4

62 ±5

60 ±5

58 ±4

58 ±4

15 .4 ±1.5

13.8 ±0.9

13 .3 ±0.7

12.1 ±0.7

6.5 ±0.5

5.6 ±0.4

5.2 ±0.2

4.8 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 23

> 24

> 24

> 27

> 27

> 27

> 27

Cross polar ratio (dB)

> 20

> 20

> 22

> 22

> 22

> 20

> 19

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 – 2690

Frequency range (MHz) Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1695 - 2200

1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2490 - 2690

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.2

17.3

17.4

17.9

18.0

16.9

17.3

17.6

16.1 ±0.5

17.2 ±0.5

17.3 ±0.5

17.8 ±0.5

17.9 ±0.5

16.8 ±0.5

17.2 ±0.5

17.5 ±0.5

> 15

> 16

> 16

> 17

> 17

> 17

> 17

> 17

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

62 ±6

60 ±5

58 ±4

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

6.5 ±0.5

5.9 ±0.4

4.7 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 25

> 28

> 28

> 28

> 28

> 27

> 27

> 28

Cross polar ratio (dB)

> 15

> 16

> 17

> 16

> 15

> 20

> 20

> 18

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

167

2LnH Band 6-16 Ports

Gain (dBi)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

ASI4518R31v06 DXXXXXX-690-960/690-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-14.5i/14.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 469 x 206

Packing dimensions (H x W x D) (mm)

1870 x 535 x 285

Antenna weight (kg)

106

34.6

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

51.9 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1383 1499

Mast diameter supported (mm)

Frontal: 440 (at 150 km/h) Lateral: 265 (at 150 km/h) Maximum: 585 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 16 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1427 - 2690 MHz

1695 - 2200 MHz

168

1695 - 2690 MHz

2490 - 2690 MHz

ASI4518R31v06 DXXXXXX-690-960/690-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-14.5i/14.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Lightning protection (kA)

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr1 HWMxxx……b1 HWMxxx……Ly1

b1 Ly1

Cy2

Ry3

HWMxxx……Cy2 HWMxxx……Ry3 HWMxxx……Rr2

Lr1

Rr2

r - Red y - Yellow L - Left array R - Right array C - Center array

169

2LnH Band 6-16 Ports

Pin assignment according AISG

ASI4518R36v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with Integrated RCUs - 2.6m Preliminary Issue Electrical Properties Frequency range (MHz)

2 x (1427 - 2690)

2 x (690 - 960)

1427 - 1518

1695 - 2690 2 - 12

2 x (1695 - 2690)

Electrical downtilt (°)

2 - 12

Gain (dBi)

16.7

16

17.5

17.3

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

15

15

16

16

Horizontal 3dB beam width (°)

68

68

65

65

Vertical 3dB beam width (°)

8

8

6

6

VSWR

2 - 12

< 1.5

Front to back ratio, copolar (dB)

Typ. 25

Typ. 25

Typ. 25

Cross polar ratio (dB)

Typ. 17

Typ. 17

Typ. 17

0°

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 449 x 196

Packing dimensions (H x W x D) (mm)

3024 x 515 x 275

Antenna net weight (kg)

47

Mechanical downtilt (°)

0-8

Connector

12x 4.3-10 Female

RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

170

ASI4518R14v06 DXXXXXX-690-960/690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65/65-14.5i/14.5i/17i/17i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (1695 - 2200)

2 x (2490 2690)

1695 - 1990 1920 - 2200

2490 - 2690

2 x (690 - 960)

Frequency range (MHz) 690 - 803

790 - 862

824 - 894

880 - 960

Polarization

+45° , -45° 0 - 14 , continuously adjustable , each band separately

Electrical downtilt (°) at mid Tilt over all Tilts

13.8

14.2

14.4

14.5

16.7

16.9

17.8

13.7 ±0.5

14.1 ±0.5

14.3 ±0.5

14.4 ±0.5

16.5 ±0.5

16.8 ±0.5

17.6 ±0.5

> 15

> 17

> 17

> 16

> 16

> 16

> 16

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

66 ±5

63 ±5

62 ±5

60 ±5

65 ±5

63 ±5

60 ±5

15.3 ±1.2

14.0 ±1.1

13.3 ±1.0

12.2 ±0.8

6.5 ±0.7

5.8 ±0.5

5.0 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 25

> 26

> 27

> 27

Cross polar ratio (dB)

> 16

> 18

> 19

> 20

> 15

> 16

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

2LnH Band 6-16 Ports

Gain (dBi)

2 - 12 , continuously adjustable , each band separately

250 (at 50℃ ambient temperature)

960 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -150 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1499 x 429 x 196

Packing dimensions (H x W x D) (mm)

1695 x 530 x 270

Antenna weight (kg)

31.3

Clamps weight (kg)

3.6 (2 units) 43.0 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1376

Mast diameter supported (mm)

1499

Antenna packing weight (kg)

-40 .. +65 Frontal: 410 (at 150 km/h) Lateral: 245 (at 150 km/h) Maximum: 540 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

171

ASI4518R14v06 DXXXXXX-690-960/690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65/65-14.5i/14.5i/17i/17i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Ly1 HWMxxx……Lb1 HWMxxx……Lr 1

Lb1 Ly1 Rb2 Ry2

HWMxxx……Rb2 HWMxxx……Ry2 HWMxxx……Rr 2

Lr1

Rr2

r - Red y – Yellow b - Blue L - Left array R - Right array

Pattern sample for reference

690 - 960 MHz

172

1695 - 2200 MHz

2490 - 2690 MHz

ASI4517R3v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

4 x (1695 - 2690)

824 - 894

880 - 960

+45° , -45° 0 - 10 , continuously adjustable , each band separately

Electrical downtilt (°) at mid Tilt over all Tilts Gain (dBi)

Bottom

2 - 12 , continuously adjustable , each band separately

14.9

15.5

15.8

16.0

14.7 ±0.5

15.3 ±0.5

15.6 ±0.5

15.8 ±0.5

at mid Tilt over all Tilts

15.5

15.9

16.4

16.7

15.4 ±0.5

15.8 ±0.5

16.3 ±0.4

16.6 ±0.6

at mid Tilt

Top

15.0

15.4

15.7

16.2

14.9 ±0.6

15.3 ±0.6

15.6 ±0.5

16.1 ±0.5

> 16

> 17

> 16

> 17

> 16

63 ±5

62 ±5

61 ±5

60 ±5

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

> 16

> 16

> 17

68 ±4

63 ±3

61 ±3

60 ±3

10.5 ±0.9

9.5 ±0.8

9.2 ±0.7

8.5 ±0.7

Bottom

10.4 ±0.6

9.4 ±0.5

8.1 ±0.3

7.4 ±0.3

Top

9.7 ±0.6

8.9 ±0.5

7.9 ±0.3

7.1 ±0.3

> 25

> 25

> 25

> 20

> 20

> 20

VSWR

< 1.5 ≥ 28

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 22

Cross polar ratio (dB)

> 18

0°

Max. power per input (W)

> 25

> 25

> 24

> 25

> 18

> 18

> 20

> 20

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

1000 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 429 x 196

Packing dimensions (H x W x D) (mm)

2220 x 530 x 275

Antenna weight (kg)

36.0

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

106

52.8 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 555 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 735 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

1273 1999

Mast diameter supported (mm) Radome material

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

Model

Description

ASMDT0F01 Mechanical downtilt: 0 - 12 °

Weight

Units per antenna

3.1 kg

1 (Separate packing)

173

2LnH Band 6-16 Ports

Polarization

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

ASI4517R3v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM

Integrated RET S/N: HWMxxx……LTy2 HWMxxx……LBy1

LTy2

RTy4

LBy1

RBy3

Lr1

Rr2

HWMxxx……...Lr1 HWMxxx...…RBy3 HWMxxx...…RTy4 HWMxxx…..…Rr2 r - Red L - Left array T - Top array

y - Yellow R - Right array B - Bottom array

Pattern sample for reference

690 - 960 MHz

174

1695 - 2690 MHz

1695 - 2690 MHz

(Bottom)

(Top)

ASI4518R10v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

4 x (1695 - 2690)

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable , each band separately

at mid Tilt over all Tilts Gain (dBi)

2 - 12 , continuously adjustable , each band separately

15.8

16.5

16.7

17.0

15.5 ±0.5

16.3 ±0.5

16.5 ±0.5

16.7 ±0.5

at mid Tilt

Bottom

over all Tilts

16.6

17.0

17.2

17.6

16.4 ±0.6

16.8 ±0.5

17.0 ±0.5

17.4 ±0.5

at mid Tilt

Top

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.6

17.0

17.2

17.6

16.4 ±0.6

16.8 ±0.5

17.0 ±0.5

17.4 ±0.5

> 16

> 16

> 16

> 16

> 16

> 17

> 17

> 17

68 ±5

65 ±5

62 ±5

60 ±5

65 ±5

63 ±5

61 ±5

60 ±5

8.8 ±0.7

8.0 ±0.6

7.8 ±0.5

7.5 ±0.5

7.0 ±0.7

6.0 ±0.5

5.5 ±0.4

5.0 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 26

> 26

> 26

> 26

> 27

> 27

> 28

Cross polar ratio (dB)

> 17

> 18

> 19

> 20

> 15

> 16

> 17

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

1200 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 429 x 196

Packing dimensions (H x W x D) (mm)

2980 x 530 x 275

Antenna weight (kg)

45.6

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

66.1 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1787

50 - 115

2769

Mast diameter supported (mm)

Frontal: 805 (at 150 km/h) Lateral: 495 (at 150 km/h) Maximum: 1060 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

175

2LnH Band 6-16 Ports

Polarization

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

ASI4518R10v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……LTy2 HWMxxx……LBy1

LTy2

RTy4

LBy1

RBy3

Lr1

Rr2

HWMxxx……...Lr1 HWMxxx...…RBy3 HWMxxx...…RTy4 HWMxxx…..…Rr2 r - Red L - Left array T - Top array

y - Yellow R - Right array B - Bottom array

Pattern sample for reference

690 - 960 MHz

176

1695 - 2690 MHz

ASI4518R37v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-14.5i/14.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs -1.5m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45° 0 - 14 , continuously adjustable, each band separately

Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

13.7

14.0

14.1

2 - 12 , continuously adjustable, each band separately 16.7

14.3

17.2

17.4

17.6

13.6 ±0.5 14.0 ±0.5 14.1 ±0.5 14.2 ±0.5 16.6 ±0.5 17.1 ±0.5 17.3 ±0.5 17.5 ±0.5 > 15

> 16

> 16

> 16

> 15

> 16

> 16

> 16

67 ±6

66 ±5

66 ±5

65 ±6

68 ±8

62 ±6

58 ±6

58 ±6

15.1 ±1.5

13.8 ±0.9

13.3 ±0.9

12.4 ±0.8

6.9 ±0.5

6.2 ±0.6

5.5 ±0.3

4.9 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 26

≥ 26

Front to back ratio , ±30° (dB)

> 20

> 21

> 22

> 22

> 24

> 26

> 25

> 26

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 17

> 17

> 17

> 18

0°

Max. power per input (W) Intermodulation IM3 (dBc)

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

50

50

DC Ground

DC Ground

Electrical Properties 2 x (1427 - 2690)

Frequency range (MHz)

1427 - 1518

1695 - 1990

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200

2 - 12 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.9

17.2

17.3

17.4

17.5

15.8 ±0.5

17.1 ±0.5

17.2 ±0.5

17.3 ±0.5

17.4 ±0.5

> 15

> 16

> 16

> 16

> 16

70 ±7

69 ±6

68 ±6

66 ±6

59 ±7

8.8 ±0.5

7.1 ±0.5

6.3 ±0.5

5.6 ±0.3

5.1 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 26

Front to back ratio , ±30° (dB)

> 23

> 26

> 25

> 24

> 24

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 16

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 700 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

177

2LnH Band 6-16 Ports

Electrical downtilt (°)

ASI4518R37v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-14.5i/14.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs -1.5m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1509 x 469 x 206

Packing dimensions (H x W x D) (mm)

1760 x 540 x 250

Antenna weight (kg)

106

30.9

Clamps weight (kg)

3.6 (2 units) 40.9 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

GFRPP

Radome colour

1383 1509

Antenna packing weight (kg)

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 445 (at 150 km/h) Lateral: 265 (at 150 km/h) Maximum: 590 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960

178

1427 - 2690

1695 - 2690

ASI4518R37v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-14.5i/14.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs -1.5m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Lightning protection (kA)

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Lr1 HWMxxx……Ly1 HWMxxx……CLy2

Ly1

CLy2 CRy3

Ry4

HWMxxx……CRy3 HWMxxx……Ry4 HWMxxx……Rr2

Lr1

Rr2

r - Red y - Yellow L - Left array R - Right array C - Center array

179

2LnH Band 6-16 Ports

Pin assignment according AISG

ASI4518R39v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Preliminary Issue Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

824 - 894

2 x (1695 - 2690) 880 - 960

Polarization

0 - 10 , continuously adjustable, each band separately

Electrical downtilt (°) Gain (dBi)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

14.5

14.8

15.1

2 - 12 , continuously adjustable, each band separately

15.3

16.6

17.2

17.4

17.6

14.4 ±0.5 14.7 ±0.5 14.9 ±0.5 15.2 ±0.5 16.5 ±0.7 17.1 ±0.5 17.3 ±0.5 17.5 ±0.5 > 15

> 16

69 ±6

69 ±6

> 16

10.8 ±0.8 10.0 ±0.7

> 16

> 15

> 16

> 16

> 16

68 ±6

66 ±6

69 ±7

65 ±6

60 ±6

58 ±6

9.5 ±0.6

8.9 ±0.6

6.9 ±0.5

6.2 ±0.6

5.5 ±0.3

4.9 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 27

≥ 27

Front to back ratio , ±30° (dB)

> 21

> 21

> 22

> 23

> 24

> 26

> 25

> 26

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 17

> 17

> 17

> 18

0°

Max. power per input (W) Intermodulation IM3 (dBc)

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Impedance (Ω) Grounding

Electrical Properties 2 x (1427 - 2690)

Frequency range (MHz)

1427 - 1518

1695 - 1990

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200

2 - 12 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.7

17.0

17.2

17.3

17.6

15.6 ±0.6

16.8 ±0.6

17.1 ±0.5

17.2 ±0.5

17.5 ±0.5

> 15

> 16

> 16

> 16

> 16

70 ±7

69 ±6

68 ±6

66 ±6

59 ±6

8.8 ±0.5

7.1 ±0.5

6.3 ±0.5

5.6 ±0.3

5.1 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 27

Front to back ratio , ±30° (dB)

> 23

> 26

> 25

> 24

> 24

Cross polar ratio (dB)

> 17

> 18

> 18

> 18

> 16

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 900 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

180

ASI4518R39v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2009 x 469 x 206

Packing dimensions (H x W x D) (mm)

2265 x 560 x 250

Antenna weight (kg)

37.3

Clamps weight (kg)

5.8 (2 units) 52.5 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

GFRPP

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1383 2009

Antenna packing weight (kg)

106

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2LnH Band 6-16 Ports

Frontal: 605 (at 150 km/h) Lateral: 370 (at 150 km/h) Maximum: 800 (at 150 km/h)

Wind load (N)*

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1427 - 2690 MHz

1695 - 2690 MHz

181

ASI4518R39v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Lr1 HWMxxx……Ly1 HWMxxx……CLy2

Ly1

CLy2 CRy3

Ry4

HWMxxx……CRy3 HWMxxx……Ry4 HWMxxx……Rr2

Lr1

r - Red y - Yellow L - Left array R - Right array C - Center array

182

Rr2

ASI4518R41v06 DXXXXXX-690-862/880-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65/65-14i/14.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 690 - 803

Polarization Electrical downtilt (°) Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

790 - 862

1427 - 2690 (Ry3) 880 - 960 (r2) 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

+45° , -45°

2 - 16, continuously adjustable , each band separately

2 - 12 , continuously adjustable

13.8

14.2

14.6

15.8

17.3

17.5

17.8

18.1

13.7 ±0.5

14.1 ±0.5

14.5 ±0.6

15.7 ±0.5

17.1 ±0.5

17.3 ±0.5

17.5 ±0.4

17.7 ±0.4

> 15

> 15

> 16

> 15

> 17

> 17

> 16

> 16

66 ±3.0

64 ±2.8

61 ±3.5

74 ±6.0

69 ±4.5

68 ±5.2

63 ±4.7

59 ±4.0

14.7 ±1.2

13.1 ±0.6

12.3 ±0.5

8.0 ±0.4

6.5 ±0.5

5.9 ±0.5

5.2 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30°(dB)

> 22

> 23

> 24

> 22

> 24

> 26

> 26

> 24

Cross polar ratio (dB)

> 21

> 22

> 22

> 19

> 20

> 20

> 20

> 17

0°

400 (at 50℃ ambient temperature)*

Max. power per input (W)

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2200 (b1) Frequency range (MHz)

1695 - 1990

1920 - 2200

2490 - 2690 (Ly1)

Polarization

1920 2200

2200 - 2490 2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1695 - 2690 (Cy2) 1695 1990

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

16.9

17.2

17.8

17.3

17.5

17.9

18.0

16.7 ±0.5

17.0 ±0.6

17.8 ±0.5

17.1 ±0.5

17.3 ±0.5

17.7 ±0.4

17.8 ±0.5

> 16

> 18

> 16

> 16

> 16

> 17

> 17

Horizontal 3dB beam width (°)

68 ±5.2

66 ±5.0

58 ±4.5

64 ±5.0

62 ±6.0

58 ±5.3

58 ±5.1

Vertical 3dB beam width (°)

6.5 ±0.5

5.9 ±0.5

4.7 ±0.3

6.5 ±0.6

5.8 ±0.5

5.3 ±0.4

4.7 ±0.3

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio, ±30°(dB)

> 24

> 27

> 26

> 27

> 28

> 28

> 27

Cross polar ratio (dB)

> 22

> 22

> 20

> 22

> 19

> 17

> 21

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

183

2LnH Band 6-16 Ports

690 - 862 (r1)

Frequency range (MHz)

ASI4518R41v06 DXXXXXX-690-862/880-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65/65-14i/14.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 369 x 149

Packing dimensions (H x W x D) (mm)

1790 x 435 x 240

Antenna weight (kg)

28.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

40.2 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1381 1499

Radome material

Frontal: 425 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 510 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

1695 - 2200 MHz

184

880 - 960 MHz

1427 - 2690 MHz

2490 - 2690 MHz

1695 - 2690 MHz

ASI4518R41v06 DXXXXXX-690-862/880-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65/65-14i/14.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Lightning protection (kA)

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……..b1 HWMxxx……..r1

b1 Ly1

Cy2

Ry3

HWMxxx……Cy2 HWMxxx……Ry3 HWMxxx……..r2 r - Red y - Yellow C - Center array L - Left array

r1

r2

b - Blue R - Right array

185

2LnH Band 6-16 Ports

Pin assignment according AISG

ASI4518R32v06 DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

Polarization

1427 - 2690 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

880 - 960

790 - 862

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.2

15.5

15.8

15.9

17.3

17.5

17.8

18.1

15.1 ±0.5

15.3 ±0.5

15.7 ±0.5

15.8 ±0.5

17.1 ±0.5

17.2 ±0.5

17.5 ±0.4

17.6 ±0.5

> 15

> 15

> 17

> 15

> 17

> 17

> 16

> 16

67 ±2.5

65 ±2.6

61 ±2.3

73 ±6.0

69 ±5.5

68 ±5.7

63 ±4.7

58 ±4.0

11.3 ±0.6

10.0 ±0.6

8.8 ±0.4

8.0 ±0.4

6.5 ±0.5

5.9 ±0.5

5.1 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 25

> 25

> 22

> 24

> 24

> 27

> 25

Cross polar ratio (dB)

> 22

> 22

> 22

> 19

> 22

> 21

> 20

> 17

0°

400 (at 50℃ ambient temperature)*

Max. power per input (W)

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier)

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2690

Frequency range (MHz) Polarization

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1695 - 2200

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200

2490 - 2690

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

17.3

17.5

18.0

18.2

16.9

17.3

18.0

17.1 ±0.5

17.3 ±0.5

17.8 ±0.4

18.0 ±0.6

16.8 ±0.5

17.1 ±0.5

17.7 ±0.5

> 17

> 17

> 16

> 16

> 17

> 18

> 17

Horizontal 3dB beam width (°)

65 ±4.8

64 ±6.0

58 ±6.8

58 ±6.9

67 ±4.2

66 ±4.6

58 ±4.4

Vertical 3dB beam width (°)

6.5 ±0.5

5.9 ±0.5

5.1 ±0.4

4.8 ±0.3

6.5 ±0.5

5.9 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30 (dB)

> 27

> 28

> 27

> 27

> 24

> 26

> 25

Cross polar ratio (dB)

> 21

> 21

> 17

> 22

> 22

> 22

> 21

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -150 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

50

50

DC Ground

DC Ground

* Total power : 900 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

186

ASI4518R32v06 DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1999 x 369 x 149

Packing dimensions (H x W x D) (mm)

2265 x 435 x 240

Antenna weight (kg)

33.2

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

49.5 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1404 1999

Radome material

Frontal: 580 (at 150 km/h) Lateral: 195 (at 150 km/h) Maximum: 700 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250 12 x 4.3-10 Female

Connector position

2LnH Band 6-16 Ports

Connector

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

1695 - 2690 MHz

880 - 960 MHz

1695 - 2200 MHz

1427 - 2690 MHz

2490 - 2690 MHz

187

ASI4518R32v06 DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……..b1 HWMxxx……Ly1 HWMxxx……..r1

b1 Ly1

Cy2

HWMxxx……Cy2 HWMxxx……Ry3 HWMxxx……..r2

r1

r2

r - Red y - Yellow b - Blue C - Center array L - Left array R - Right array

188

Ry3

ASI4518R4v06 DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2690/1710-269065/65/65/65/65/65-16.5i/17i/18i/18i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 12-Port Antenna with 6 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

880 - 960

790 - 862

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

+45°, -45°

Electrical downtilt (°)

0 - 10, continuously adjustable , each band separately at mid Tilt over all Tilts

Gain (dBi)

4 x (1710 - 2690) 1710 - 1990

Bottom

16.2

16.5

16.9

16.0 ±0.5

16.3 ±0.5

16.8 ±0.6

at mid Tilt over all Tilts at mid Tilt

Top

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

> 20

> 18

> 17

17.3

17.4

17.6

18.1

17.2 ±0.5

17.4 ±0.5

17.5 ±0.6

18.0 ±0.6

16.9

17.2

17.4

17.5

16.8 ±0.5

17.1 ±0.3

17.2 ±0.5

17.5 ±0.5

> 20

> 20

> 19

> 19

Horizontal 3dB beam width (°)

66 ±2.7

65 ±2.9

63 ±4.1

66 ±4.7

63 ±3.3

61 ±5.2

60 ±4.4

Vertical 3dB beam width (°)

8.6 ±1.1

7.4 ±0.9

6.5 ±0.6

7.6 ±0.6

6.8 ±0.5

6.1 ±0.5

5.6 ±0.2

< 1.5 ≥ 28

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28 (690 - 862 // 880 - 960 MHz) ≥ 30 (690 - 862 // 1710 - 2690 MHz) ≥ 30 (880 - 960 // 1710 - 2690 MHz) ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)

2LnH Band 6-16 Ports

VSWR

0°

Max. power per input (W)

> 25

> 27

> 26

> 30

> 30

> 27

> 27

> 18

> 22

> 22

> 19

> 19

> 21

> 20

400 (at 50℃ ambient temperature)

Total power (W)

250 (at 50℃ ambient temperature)

1000 (at 50℃ ambient temperature) ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 359 x 178

Packing dimensions (H x W x D) (mm)

2980 x 425 x 255

Antenna weight (kg)

45.1

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

63.6 (included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1862

50 - 115

Radome material

-40 .. +65 Frontal : 945 (at 150 km/h) Lateral: 285 (at 150 km/h) Maximum: 995 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

2769

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0-8°

3.1 kg

1 (Separate packing)

189

ASI4518R4v06 DXXXXXX-690-862/880-960/1710-2690/1710-2690/1710-2690/1710-269065/65/65/65/65/65-16.5i/17i/18i/18i/17.5i/17.5i-M/M/M/M/M/M-R

EasyRET 12-Port Antenna with 6 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx…..yyLB HWMxxx…….yLT

yLT

yyyRT

yyLB

yyyyRB

HWMxxx……….r HWMxxx…yyyRT HWMxxx..yyyyRB HWMxxx………rr r - Red L - Left array T - Top array

r

rr

y - Yellow R - Right array B -Bottom array

Pattern sample for reference

690 - 862 MHz

190

880 - 960 MHz

1710 - 2690 MHz (Top)

1710 - 2690 MHz (Bottom)

AHP4518R3v06 D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514.5i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

824 - 894

880 - 960

Polarization

2 x (2490 - 2690)

1695 - 1990 1920 - 2200

2490 - 2690

+45° , -45° 0 - 14 , continuously adjustable , each band separately

Electrical downtilt (°)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable , each band separately

13.7

14.3

14.6

14.8

16.9

17.3

17.6

13.6 ±0.5

14.2 ±0.5

14.5 ±0.5

14.7 ±0.5

16.8 ±0.5

17.2 ±0.5

17.5 ±0.5

> 17

> 17

> 17

> 17

> 17

> 17

> 17

70 ±5

70 ±4

69 ±4

65 ±4

62 ±6

60 ±5

58 ±4

15.4 ±1.2

13.7 ±0.7

13.3 ±0.7

12.5 ±0.7

6.5 ±0.5

5.9 ±0.4

4.7 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 23

> 24

> 24

> 26

> 26

> 28

Cross polar ratio (dB)

> 22

> 22

> 22

> 22

> 20

> 20

> 18

0°

Max. power per input (W)

2LnH Band 6-16 Ports

at mid Tilt Gain (dBi)

2 x (1695 - 2200)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690

Frequency range (MHz)

1427 - 1518

1695 - 1990

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.2

17.3

17.4

17.9

18.0

16.1 ±0.5

17.2 ±0.5

17.3 ±0.5

17.8 ±0.5

17.9 ±0.5

> 15

> 17

> 17

> 17

> 16

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 25

> 28

> 27

> 27

> 27

Cross polar ratio (dB)

> 15

> 17

> 18

> 17

> 15

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

191

AHP4518R3v06 D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514.5i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 469 x 206

Packing dimensions (H x W x D) (mm)

1870 x 535 x 285

Antenna weight (kg)

36.2

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

106

53.5 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 440 (at 150 km/h) Lateral: 265 (at 150 km/h) Maximum: 585 (at 150 km/h)

Wind load (N)* Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

14 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 16 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1695 - 2200 MHz

192

1427 - 2690 MHz

2490 - 2690 MHz

1383 1499

Mast diameter supported (mm)

AHP4518R3v06 D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514.5i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Lr1 HWMxxx……Lb1 HWMxxx……Ly1 g

HWMxxx……Ry3

Lb1 Ly1

Cy2 Rb2 Ry3

HWMxxx……Rb2 HWMxxx……Rr2

Lr1

Rr2

g HWMxxx……Cy2 r - Red y - Yellow C - Center array L - Left array T - Top array B - Bottom array

R - Right array

193

2LnH Band 6-16 Ports

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

AHP4518R4v06 D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6516i/16i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

824 - 894

880 - 960

Polarization

2 x (2490 - 2690)

1695 - 1990 1920 - 2200

2490 - 2690

+45° , -45° 0 - 10 , continuously adjustable , each band separately

Electrical downtilt (°) Gain (dBi)

2 x (1695 - 2200)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable , each band separately

14.8

15.4

15.7

16.0

16.9

17.3

17.7

14.7 ±0.4

15.3 ±0.4

15.5 ±0.3

15.8 ±0.4

16.8 ±0.5

17.2 ±0.5

17.6 ±0.5

> 17

> 17

> 17

> 17

> 17

> 17

> 17

70 ±5

69 ±4

68 ±3

65 ±4

63 ±6

61 ±5

58 ±4

11.0 ±0.8

9.8 ±0.5

9.5 ±0.5

8.8 ±0.5

6.5 ±0.5

5.9 ±0.4

4.7 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 23

> 24

> 24

> 27

> 27

> 28

Cross polar ratio (dB)

> 20

> 20

> 22

> 22

> 20

> 20

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690

Frequency range (MHz)

1427 - 1518

1695 - 1990

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200

2 - 12 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.2

17.3

17.4

17.9

18.0

16.1 ±0.5

17.2 ±0.5

17.3 ±0.5

17.8 ±0.5

17.9 ±0.5

> 15

> 16

> 17

> 16

> 16

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 26

> 28

> 28

> 28

> 28

Cross polar ratio (dB)

> 15

> 16

> 17

> 16

> 15

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

194

AHP4518R4v06 D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6516i/16i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 469 x 206

Packing dimensions (H x W x D) (mm)

2255 x 535 x 285

Antenna weight (kg)

42.0

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

144

61.0 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1420

Radome material

-40 .. +65

1999

Mast diameter supported (mm)

Wind load (N) Max. operational wind speed (km/h)

2LnH Band 6-16 Ports

Frontal: 600 (at 150 km/h) Lateral: 365 (at 150 km/h) Maximum: 795 (at 150 km/h) 200

Survival wind speed (km/h)

250

Connector

14 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1695 - 2200 MHz

2490 - 2690 MHz

1427 - 2690 MHz

195

AHP4518R4v06 D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6516i/16i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr1 HWMxxx……Lb1 HWMxxx……Ly1 g

Lb1 Ly1

Cy2 Rb2 Ry3 Ry3

HWMxxx……Ry3 HWMxxx……Rb2 HWMxxx……Rr2

Lr1

g HWMxxx……Cy2 r - Red y - Yellow b - Blue L - Left array R - Right array C - Center array

196

Rr2

AHP4517R7v06 D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6516i/16i/15.5i/15.5i/17i/17i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (690 - 960) (Lr1 / Rr2) Frequency range (MHz)

690 - 803

790 - 862

1695 - 2690 (Cy2)

824 - 894

880 - 960

Polarization

1920 - 2200

2200 - 2490

2490 - 2690

+45° , -45° 0 - 10 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable

14.8

15.3

15.5

15.9

17.3

17.6

17.6

17.7

14.7 ±0.5

15.2 ±0.5

15.4 ±0.5

15.7 ±0.5

17.2 ±0.5

17.4 ±0.5

17.5 ±0.5

17.6 ±0.5

> 16

> 17

> 17

> 16

> 17

> 18

> 17

> 18

67 ±5

64 ±5

64 ±5

63 ±5

62 ±5

62 ±5

60 ±5

59 ±5

11.0 ±0.7

10.0 ±0.5

9.4 ±0.5

8.8 ±0.5

7.0 ±0.5

6.3 ±0.5

5.5 ±0.3

5.1 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 26 (690 - 788 // 690 - 788) ≥28 (others)

Interband isolation (dB) Front to back ratio , ±30° (dB) Cross polar ratio (dB)

0°

Max. power per input (W)

> 21

> 23

> 23

> 24

> 26

> 26

> 26

> 26

> 18

> 18

> 18

> 18

> 18

> 18

> 17

> 17

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 2 x (1427 - 1518) (Lg1 / Rg2)

Frequency range (MHz)

1427 - 1518

2 x (1695 - 2690) (Ly1 / Ry3) 1695 - 1990

Polarization

2200 - 2490

2490 - 2690

+45° , -45° 2 - 12 , continuously adjustable, each band separately

Electrical downtilt (°) Gain (dBi)

1920 - 2200

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.5

16.8

17.1

17.2

17.3

15.3 ±0.7

16.7 ±0.5

16.9 ±0.5

17 ±0.5

17.1 ±0.5

> 16

> 17

> 17

> 16

> 16

70 ±6

64 ±5

65 ±5

62 ±5

58 ±5

9.2 ±0.5

7.4 ±0.5

6.5 ±0.5

5.8 ±0.3

5.2 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB) Cross polar ratio (dB)

0°

> 24

> 26

> 27

> 27

> 24

> 18

> 18

> 18

> 18

> 18

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

200 (at 50℃ ambient temperature)* ≤ -150 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 900 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

197

2LnH Band 6-16 Ports

Electrical downtilt (°) Gain (dBi)

1695 - 1990

AHP4517R7v06 D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6516i/16i/15.5i/15.5i/17i/17i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

2099 x 449 x 196

Packing dimensions (H x W x D) (mm)

2360 x 535 x 240

Antenna weight (kg)

37.0

Clamps weight (kg)

5.8 (2 units) 50.0 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

GFRPP

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1405 2099

Antenna packing weight (kg)

Frontal: 615 (at 150 km/h) Lateral: 375 (at 150 km/h) Maximum: 810 (at 150 km/h)

Wind load (N)* Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

14 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1695 - 2690 MHz (Cy2)

198

1427 - 1518 MHz

1695 - 2690 MHz (Ry3)

AHP4517R7v06 D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6516i/16i/15.5i/15.5i/17i/17i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) 15

> 16

> 16

> 16

at mid Tilt

Gain (dBi)

824 - 894 +45° , -45°

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

70 ±5

69 ±4

68 ±3

64 ±4

9.0 ±0.5

8.0 ±0.4

7.7 ±0.5

7.2 ±0.4

Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 25

Cross polar ratio (dB)

> 20

> 22

> 22

> 22

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690

Frequency range (MHz)

4 x (1695 - 2690)

1427 - 15181695 - 19901920 - 22002200 - 24902490 - 26901695 - 19901920 - 22002200 - 24902490 - 2690

Polarization

+45° , -45°

Electrical downtilt (°)

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt

16.2

17.3

17.4

17.9

18.0

over all Tilts 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5 Gain (dBi)

Bottom Top

16.6

at mid Tilt

16.7

at mid Tilt

Horizontal 3dB beam width (°) Vertical 3dB beam Bottom width (°) Top

17.2

17.7

17.1

17.2

17.7

16.6 ±0.5 17.0 ±0.5 17.1 ±0.5 17.5 ±0.5

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

17.0

16.5 ±0.5 16.9 ±0.5 17.1 ±0.5 17.5 ±0.5

over all Tilts

> 15

> 17

> 17

> 17

> 16

> 16

> 16

> 16

> 16

61 ±5

61 ±5

59 ±4

58 ±4

7.6 ±0.5

6.7 ±0.4

6.0 ±0.3

5.4 ±0.3

6.5 ±0.5

5.8 ±0.4

5.2 ±0.3

4.8 ±0.3

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 28

> 28

> 28

> 28

> 25

> 25

> 25

> 26

Cross polar ratio (dB)

> 15

> 17

> 18

> 16

> 15

> 20

> 18

> 17

> 18

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

200

AHP4518R5v06 D7X-690-960/690-960/1427-2690/4x(1695-2690)-7x6517i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 469 x 206

Packing dimensions (H x W x D) (mm)

3024 x 535 x 285

Antenna weight (kg)

144

51.2

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

76.0 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 860 (at 150 km/h) Lateral: 535 (at 150 km/h) Maximum: 1140 (at 150 km/h)

Wind load (N)

200

Survival wind speed (km/h)

2LnH Band 6-16 Ports

Max. operational wind speed (km/h)

2769

50 - 115

Radome material

1873

Mast diameter supported (mm)

250

Connector

14 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8°

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1427 - 2690 MHz

1695 - 2690 MHz (Bottom)

1695 - 2690 MHz (Top)

201

AHP4518R5v06 D7X-690-960/690-960/1427-2690/4x(1695-2690)-7x6517i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……...Lr1

RTy5

LTy2

HWMxxx……LBy1 Cy3

HWMxxx……LTy2 g

HWMxxx……..Cy3

LBy1

RBy4

Lr1

Rr2

HWMxxx……RBy4 HWMxxx………Rr2 g HWMxxx……RTy5 r - Red y - Yellow b - Blue L - Left array C - Center array R - Right array T - Top array B - Bottom array

202

AHP4517R1v06 D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties Frequency range (MHz)

690 - 803

Polarization Electrical downtilt (°) at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

1427 - 2690 (Ry3)

880 - 960 (r2)

790 - 862

1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

+45° , -45°

2 - 16, continuously adjustable , each band separately

2 - 12 , continuously adjustable

13.8

14.3

14.7

15.9

17.3

17.5

17.8

18.1

13.8 ±0.5

14.2 ±0.5

14.6 ±0.5

15.8 ±0.5

17.1 ±0.5

17.2 ±0.5

17.5 ±0.4

17.6 ±0.5

> 15

> 15

> 16

> 15

> 17

> 17

> 15

> 16

68 ±2.7

66 ±4.3

60 ±3.5

73 ±6.0

69 ±5.5

68 ±5.7

63 ±4.7

58 ±4.0

14.9 ±1.4

13.0 ±0.8

12.2 ±0.6

8.0 ±0.4

6.5 ±0.6

5.9 ±0.5

5.1 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB) Cross polar ratio (dB)

0°

Max. power per input (W)

≥ 28

> 22

> 23

> 25

> 22

> 23

> 23

> 27

> 24

> 17

> 18

> 19

> 20

> 22

> 21

> 22

> 17

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2200 (Rb2)

Frequency range (MHz)

1695 - 1990

Polarization Electrical downtilt (°) Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

1920 - 2200

2490 - 2690 (Cy2)

1695 - 2200 (Lb1) 1695 - 1990

1920 - 2200

2490 - 2690 (Ly1)

+45° , -45°

+45° , -45°

2 - 12 , continuously adjustable , each band separately

2 - 12 , continuously adjustable , each band separately

16.8

17.0

17.7

16.9

17.3

18.0

16.6 ±0.5

16.8 ±0.5

17.5± 0.5

16.8 ±0.5

17.1 ±0.5

17.7 ± 0.5

> 16

> 16

> 17

> 17

> 16

> 16

Horizontal 3dB beam width (°)

65 ±6.0

64 ±6.0

58 ±5.0

67 ±4.0

66 ±4.0

58 ±4.0

Vertical 3dB beam width (°)

6.5 ±0.5

5.9 ±0.5

4.8 ±0.3

6.5 ±0.5

5.9 ±0.4

4.8 ±0.2

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB) Front to back ratio , ±30 (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc)

0°

> 27

> 25

> 24

> 27

> 26

> 22

> 21

> 22

> 22

> 21

> 21

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -150 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Impedance (Ω) Grounding

≥ 28

> 26

* Total power : 700 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

203

2LnH Band 6-16 Ports

690 - 862 (r1)

AHP4517R1v06 D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 369 x 149

Packing dimensions (H x W x D) (mm)

1790 x 435 x 240 106

Antenna weight (kg)

30.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

40.2 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1381 1499

Radome material

Frontal: 425 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 510 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

14 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

1695 - 2200 MHz (Rb2)

204

880 - 960 MHz

1427 - 2690 MHz

2490 - 2690 MHz (Ly1)

1695 - 2200 MHz (Lb1)

2490 - 2690 MHz (Cy2)

AHP4517R1v06 D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Lightning protection (kA)

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……Lb1 HWMxxx……Cy2 g

Lb1 Ly1

Rb2 Cy2

Ry3

HWMxxx……Rb2 HWMxxx……Ry3

r1

r2

HWMxxx……...r2 g HWMxxx……...r1 r - Red C - Center array

y - Yellow L - Left array

b - Blue R - Right array

205

2LnH Band 6-16 Ports

Pin assignment according AISG

AHP4517R0v07 D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6515i/15.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

790 - 862

Polarization

1427 - 2690 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

Electrical downtilt (°)

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt Gain (dBi)

880 - 960

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.2

15.8

16.1

17.4

17.5

17.8

18.1

17.2 ±0.5

17.3 ±0.5

17.5 ±0.4

17.6 ±0.5

15.5

15.1 ±0.5

15.3 ±0.5

15.7 ±0.5

16.0 ±0.5

> 15

> 15

> 17

> 15

> 17

> 17

> 16

> 16

67 ±2.5

65 ±2.5

61 ±2.5

73 ±6.0

68 ±5.5

65 ±6.7

63 ±4.7

58 ±4.0

11.6 ±0.8

10.3 ±0.8

9.0 ±0.5

8.1 ±0.5

6.7 ±0.6

6.0 ±0.6

5.1 ±0.4

4.8 ±0.3

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 23

> 26

> 26

> 22

> 25

> 25

> 27

> 25

Cross polar ratio (dB)

> 22

> 22

> 22

> 19

> 22

> 21

> 20

> 17

0°

Max. power per input (W) Intermodulation IM3 (dBc)

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2200 (Rb2)

Frequency range (MHz)

1695 - 1990

Polarization

1920 - 2200

2490 - 2690 (Cy2)

1695 - 2200 (Lb1) 1695 - 1990

+45° , -45°

Electrical downtilt (°)

1920 - 2200

2490 - 2690 (Ly1)

+45° , -45°

2 - 12 , continuously adjustable , each band separately 17.1

17.4

17.9

17.2

17.5

18.0

16.9 ±0.5

17.2 ±0.5

17.7 ±0.5

17.0 ±0.5

17.4 ±0.4

17.9 ±0.5

> 17

> 18

> 17

> 18

> 18

> 16

Horizontal 3dB beam width (°)

67 ±6.8

62 ±7.0

58 ±6.9

67 ±4.2

64 ±4.6

60 ±4.4

Vertical 3dB beam width (°)

6.4 ±0.6

5.8 ±0.4

4.8 ±0.4

6.4 ±0.5

5.8 ±0.5

4.8 ±0.4

Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc)

0°

> 27

> 27

> 26

> 21

> 21

> 22

> 27

> 26

> 22

> 22

> 21

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -150 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Impedance (Ω) Grounding

> 24

* Total power : 900 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

206

AHP4517R0v07 D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6515i/15.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 369 x 149

Packing dimensions (H x W x D) (mm)

2265 x 435 x 240

Antenna weight (kg)

106

35.0

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

51.3 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1404 1999

Radome material

Max. operational wind speed (km/h)

2LnH Band 6-16 Ports

Frontal: 580 (at 150 km/h) Lateral: 195 (at 150 km/h) Maximum: 700 (at 150 km/h)

Wind load (N)

200

Survival wind speed (km/h)

250

Connector

14 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 12 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

1695 - 2200 MHz (Rb2)

880 - 960 MHz

1427 - 2690 MHz

2490 - 2690 MHz (Ly1)

1695 - 2200 MHz (Lb1)

2490 - 2690 MHz (Cy2)

207

AHP4517R0v07 D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6515i/15.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Ly1 HWMxxx……Lb1 HWMxxx……Cy2 g

Lb1 Ly1

Rb2 Cy2

HWMxxx……Rb2 HWMxxx……Ry3 HWMxxx……...r2

r1

r2

g HWMxxx……...r1 r - Red C - Center array

208

y - Yellow L - Left array

b - Blue R - Right array

Ry3

AHP4517R2v06 D7X-690-862/880-960/1427-2690/4x(1695-2690)-7x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 862 (r1) 690 - 803

Polarization Electrical downtilt (°) Gain (dBi)

at mid Tilt

790 - 862

+45° , -45°

+45° , -45°

2 - 12, continuously adjustable , each band separately

2 - 12 , continuously adjustable

15.9

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

1427 - 2690 (RBy4) 880 - 960 (r2) 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

16.3

17.0

15.9

17.3

17.5

17.8

18.1

15.8 ±0.5 16.0 ±0.5 16.7 ±0.5 15.8 ±0.5 17.1 ±0.5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5 >15

>15

>16

> 15

> 17

> 17

> 15

> 16

Horizontal 3dB beam width (°)

67 ±1.5

66 ±2.6

60 ±2.3

73 ±6.0

69 ±5.5

68 ±5.7

63 ±4.7

58 ±4.0

Vertical 3dB beam width (°)

9.2 ±0.8

8.6 ±1.3

7.3 ±0.5

8.0 ±0.4

6.5 ±0.6

5.9 ±0.5

5.1 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30°(dB)

> 23

> 24

> 25

> 22

> 23

> 23

> 27

> 24

Cross polar ratio (dB)

> 18

> 19

> 22

> 20

> 22

> 21

> 22

> 17

0°

400 (at 50℃ ambient temperature)*

Max. power per input (W)

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 4 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

Bottom Top

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2200 - 2490

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

17.3

17.5

18.1

18.2

17.1 ±0.5

17.3 ±0.5

17.9 ±0.4

18.0 ±0.5

16.8

17.1

17.6

18.0

16.5 ±0.5

16.9 ±0.5

17.4 ±0.4

17.7 ±0.5

> 17

> 17

> 18

> 17

Horizontal 3dB beam width (°)

66 ±4.7

66 ±5.2

60 ±5.3

58 ±5.1

Vertical 3dB beam width (°)

6.6 ±0.6

6.0 ±0.5

5.2 ±0.5

4.8 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio, ±30°(dB)

> 25

> 27

> 27

> 26

Cross polar ratio (dB)

> 23

> 20

> 19

> 23

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

209

2LnH Band 6-16 Ports

Frequency range (MHz)

AHP4517R2v06 D7X-690-862/880-960/1427-2690/4x(1695-2690)-7x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 369 x 149

Packing dimensions (H x W x D) (mm)

2965 x 435 x 240

Antenna weight (kg)

43.7

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

106

64.5 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1901 2769

Frontal: 845 (at 150 km/h) Lateral: 280 (at 150 km/h) Maximum: 1015 (at 150 km/h)

Wind load (N)

14 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

880 - 960 MHz

1695 - 2690 MHz (Bottom) 210

1427 - 2690 MHz

1695 - 2690 MHz (Top)

AHP4517R2v06 D7X-690-862/880-960/1427-2690/4x(1695-2690)-7x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……LTy2 HWMxxx……LBy1 g

LTy2

RTy5

HWMxxx……Cy3 HWMxxx……RBy4 HWMxxx……RTy5

LBy1

HWMxxx……...r2

RBy4

Cy3

r1

r2

g HWMxxx……...r1 r - Red C - Center array T - Top array

y - Yellow b - Blue L - Left array R - Right array B - Bottom array

211

2LnH Band 6-16 ports

Pin assignment according AISG

D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x65AOC4518R7v06 D8X-2x(690-960)/2x(1427-2690)/2x(1695-2200)/2x(2490-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R 14.5i/14.5i/17.5i/17.5i/16.5i/16.5i/17i/17i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 1.5m Model: AOC4518R3v06 Preliminary Issue Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2200)

824 - 894

Polarization

1920 - 2200

2 x (2490 - 2690)

+45° , -45° 0 - 14 , continuously adjustable, each band separately

Electrical downtilt (°) Gain (dBi)

1695 - 1990

880 - 960

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable, each band separately

13.7

14.0

14.1

14.3

16.1

16.5

17.1

13.6 ±0.5

14.0 ±0.5

14.1 ±0.5

14.2 ±0.5

16.0 ±0.6

16.4 ±0.6

17.0 ±0.5

> 15

> 16

> 16

> 16

> 15

> 16

> 16

69 ±7

68 ±6

68 ±6

66 ±6

69 ±7

65 ±6

58 ±6

15.1 ±1.5

13.8 ±0.9

13.3 ±0.9

12.4 ±0.8

7.5 ±0.7

6.5 ±0.6

5.2 ±0.3

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 26

Interband isolation (dB)

≥ 26

Front to back ratio , ±30° (dB)

> 20

> 21

> 22

> 22

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

0°

Max. power per input (W)

> 24

> 26

> 26

> 17

> 17

> 18

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

50

50

DC Ground

DC Ground

Intermodulation IM3 (dBc) Impedance (Ω) Grounding

Electrical Properties 2 x (1427 - 2690)

Frequency range (MHz)

1427 - 1518

1695 - 1990

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200

2 - 12 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.7

17.0

17.2

17.3

17.6

15.6 ±0.6

16.8 ±0.6

17.1 ±0.5

17.2 ±0.5

17.5 ±0.5

> 15

> 16

> 16

> 16

> 16

70 ±7

69 ±6

68 ±6

66 ±6

59 ±6

8.8 ±0.5

7.1 ±0.5

6.3 ±0.5

5.6 ±0.3

5.1 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 26

Front to back ratio , ±30° (dB)

> 23

> 26

> 25

> 24

> 24

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 16

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 700 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

212

AOC4518R7v06 D8X-2x(690-960)/2x(1427-2690)/2x(1695-2200)/2x(2490-2690)-8x6514.5i/14.5i/17.5i/17.5i/16.5i/16.5i/17i/17i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 1.5m Preliminary Issue Mechanical Properties Antenna dimensions (H x W x D) (mm)

1509 x 469 x 206

Packing dimensions (H x W x D) (mm)

1760 x 540 x 250

Antenna weight (kg)

35.1

Clamps weight (kg)

5.8 (2 units) 47.3 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

GFRPP

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1383 1509

Antenna packing weight (kg)

106

Max. operational wind speed (km/h)

2LnH Band 6-16 Ports

Frontal: 445 (at 150 km/h) Lateral: 265 (at 150 km/h) Maximum: 590 (at 150 km/h)

Wind load (N)*

200

Survival wind speed (km/h)

250

Connector

16 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 16 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1427 - 2690 MHz

1695 - 2200 MHz

2490 - 2690 MHz

213

AOC4518R7v06 D8X-2x(690-960)/2x(1427-2690)/2x(1695-2200)/2x(2490-2690)-8x6514.5i/14.5i/17.5i/17.5i/16.5i/16.5i/17i/17i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 1.5m Preliminary Issue Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx………Lr1 HWMxxx……...Ly1 HWMxxx……CLy2 HWMxxx……CRy3 h

g

Lb1

Rb2

Ly1

CLy2 CRy3 Ry4

Lr1

Rr2

HWMxxx……...Ry4 HWMxxx………Rr2 g HWMxxx………Lb1 h HWMxxx……...Rb2 r - Red y - Yellow b - Blue L - Left array R - Right array C - Center array

214

AOC4518R4v06 D8X-2x(690-960)/2x(1427-2690)/2x(1695-2200)/2x(2490-2690)-8x6515.5i/15.5i/17.5i/17.5i/16.5i/16.5i/17i/17i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m Preliminary Issue Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

880 - 960

2 x (2490 2690)

+45° , -45° 0 - 10 , continuously adjustable, each band separately

Electrical downtilt (°) Gain (dBi)

1920 - 2200

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable, each band separately

14.5

14.8

15.1

15.3

16.1

16.5

17.1

14.4 ±0.5

14.7 ±0.5

14.9 ±0.5

15.2 ±0.5

16.0 ±0.6

16.4 ±0.6

17.0 ±0.5

> 15

> 16

> 16

> 16

> 15

> 16

> 16

69 ±6

67 ±6

66 ±6

65 ±6

69 ±7

65 ±6

58 ±6

10.8 ±0.8

10.0 ±0.7

9.5 ±0.6

8.9 ±0.6

7.5 ±0.7

6.5 ±0.6

5.2 ±0.3

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 27

Interband isolation (dB)

≥ 27

Front to back ratio , ±30° (dB)

> 21

> 21

> 22

> 23

> 24

> 26

> 26

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 17

> 17

> 18

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω) Grounding

50

50

DC Ground

DC Ground

Electrical Properties 2 x (1427 - 2690)

Frequency range (MHz)

1427 - 1518

1695 - 1990

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200

2 - 12 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.7

17.0

17.2

17.3

17.6

15.6 ±0.6

16.8 ±0.6

17.1 ±0.5

17.2 ±0.5

17.5 ±0.5

> 15

> 16

> 16

> 16

> 16

70 ±7

69 ±6

68 ±6

66 ±6

59 ±6

8.8 ±0.5

7.1 ±0.5

6.3 ±0.5

5.6 ±0.3

5.1 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 27

Front to back ratio , ±30° (dB) Cross polar ratio (dB)

0°

> 23

> 26

> 25

> 24

> 24

> 17

> 18

> 18

> 18

> 16

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 900 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

215

2LnH Band 6-16 Ports

Polarization

1695 - 1990

AOC4518R4v06 D8X-2x(690-960)/2x(1427-2690)/2x(1695-2200)/2x(2490-2690)-8x6515.5i/15.5i/17.5i/17.5i/16.5i/16.5i/17i/17i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m Preliminary Issue Mechanical Properties Antenna dimensions (H x W x D) (mm)

2009 x 469 x 206

Packing dimensions (H x W x D) (mm)

2265 x 560 x 250

Antenna weight (kg)

106

40.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

55.7 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

GFRPP Light grey

Operational temperature (℃)

1383 2009

Radome colour

-40 .. +65 Frontal: 605 (at 150 km/h) Lateral: 370 (at 150 km/h) Maximum: 800 (at 150 km/h)

Wind load (N)* Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

16 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

216

1427 - 2690 MHz

1695 - 2200 MHz

2490 - 2690 MHz

AOC4518R4v06 D8X-2x(690-960)/2x(1427-2690)/2x(1695-2200)/2x(2490-2690)-8x6515.5i/15.5i/17.5i/17.5i/16.5i/16.5i/17i/17i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m Preliminary Issue Integrated RET Specifications

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx………Lr1 HWMxxx……...Ly1 HWMxxx……CLy2

h

g

HWMxxx……..Ry4

Rb2

Lb1

HWMxxx…...CRy3 Ly1

CLy2 CRy3 Ry4

Lr1

Rr2

HWMxxx……...Rr2 g HWMxxx……...Lb1 h HWMxxx……...Rb2 r - Red y - Yellow b- Blue L - Left array C - Center array R - Right array

217

2LnH Band 6-16 Ports

Properties RET type

D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x65AOC4518R5v06 D8X-2x(690-960)/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R 17i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m Model: AOC4518R3v06 Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

1695 - 2690 (CBy3)

824 - 894

880 - 960

Polarization

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Gain (dBi) Bottom

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

15.8

16.4

16.7

16.9

15.6 ±0.5

16.3 ±0.5

16.5 ±0.5

16.7 ±0.5 16.8

16.9

17.1

17.5

16.7 ±0.5

16.8 ±0.5

17.0 ±0.5

17.4 ±0.5

> 16

> 17

> 17

> 16

> 16

61 ±7

62 ±6

58 ±5

58 ±5

7.5 ±0.5

6.8 ±0.5

5.9 ±0.3

5.5 ±0.3

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) Bottom

> 16

> 16

> 16

70 ±5

69 ±4

68 ±3

64 ±4

9.0 ±0.5

8.0 ±0.4

7.7 ±0.5

7.2 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 25

> 28

> 28

> 28

> 28

Cross polar ratio (dB)

> 20

> 22

> 22

> 20

> 17

> 18

> 16

> 15

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690

Frequency range (MHz)

1427 1518

1695 1990

Polarization

Gain (dBi)

Top

4 x (1695 - 2690) 2200 2490

2490 2690

1695 1990

1920 2200

+45° , -45°

Electrical downtilt (°) Bottom

1920 2200

2200 2490

2490 2690

+45° , -45°

2 - 12 , continuously adjustable , each band separately 16.5

at mid Tilt at mid Tilt

16.9

17.1

17.6

16.4 ±0.5 16.8 ±0.5 17.0 ±0.5 17.5 ±0.5

over all Tilts 16.1

16.8

17.0

17.2

17.5

16.6

17.0

17.1

17.6

over all Tilts 16.0 ±0.5 16.7 ±0.5 16.9 ±0.5 17.1 ±0.5 17.4 ±0.5 16.5 ±0.5 16.9 ±0.5 17.0 ±0.5 17.5 ±0.5

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam Bottom width (°) Top

> 15

> 17

> 17

> 16

> 16

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

> 16

> 16

> 16

> 16

61 ±5

61 ±5

59 ±4

58 ±4

7.6 ±0.5

6.7 ±0.4

6.0 ±0.3

5.4 ±0.3

6.5 ±0.5

5.8 ±0.4

5.2 ±0.3

4.8 ±0.3

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 28

> 28

> 28

> 28

> 25

> 25

> 26

> 26

Cross polar ratio (dB)

> 15

> 17

> 18

> 16

> 15

> 20

> 18

> 17

> 18

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

218

D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x65AOC4518R5v06 D8X-2x(690-960)/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R 17i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m Model: AOC4518R3v06 Mechanical Properties

144

Antenna dimensions (H x W x D) (mm)

2769 x 469 x 206

Packing dimensions (H x W x D) (mm)

2960 x 545 x 275

Antenna weight (kg)

54.6

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

79.4 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1873

50 - 115

-40 .. +65

2769

Mast diameter supported (mm)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

2LnH Band 6-16 Ports

Frontal: 860 (at 150 km/h) Lateral: 535 (at 150 km/h) Maximum: 1140 (at 150 km/h)

16 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8°

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1695 - 2690 MHz (CBy3)

1695 - 2690 MHz (Bottom)

1427 - 2690 MHz

1695 - 2690 MHz (Top)

219

D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x65AOC4518R5v06 D8X-2x(690-960)/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R 17i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m Model: AOC4518R3v06 Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……...Lr1

LTy2 CTy4 RTy6

HWMxxx……LBy1 HWMxxx……LTy2 h

HWMxxx……CBy3

g

HWMxxx……RBy5

LBy1 CBy3 RBy5 Lr1

HWMxxx………Rr2 g HWMxxx……RTy6 h

HWMxxx……CTy4

r - Red y - Yellow L - Left array C - Center array R - Right array T - Top array B - Bottom array

220

Rr2

D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x65AOC4518R3v06 D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R 16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m Model: AOC4518R3v06 Antenna Specifications Electrical Properties 690 - 862 Frequency range (MHz)

690 - 803

Polarization

1427 - 2690

790 - 862

1427 1518

1695 1990

1920 2200

+45° , -45°

Electrical downtilt (°)

2200 2490

2490 2690

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt

15.9

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

16.3

17.0

15.9

17.3

17.5

17.8

18.1

15.8 ±0.5 16.0 ±0.5 16.7 ±0.5 15.8 ±0.5 17.1 ±0.5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5 >15

>15

>16

> 15

> 17

> 17

> 15

> 16

Horizontal 3dB beam width (°)

67 ±1.5

66 ±2.6

60 ±2.3

73 ±6.0

69 ±5.5

68 ±5.7

63 ±4.7

58 ±4.0

Vertical 3dB beam width (°)

9.2 ±0.8

8.6 ±1.3

7.3 ±0.5

8.0 ±0.4

6.5 ±0.6

5.9 ±0.5

5.1 ±0.4

4.8 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30°(dB)

> 23

> 24

> 25

> 22

> 23

> 23

> 27

> 24

Cross polar ratio (dB)

> 18

> 19

> 22

> 20

> 22

> 21

> 22

> 17

0°

400 (at 50℃ ambient temperature)*

Max. power per input (W)

250 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 5 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization Electrical downtilt (°) Gain (dBi)

Bottom

2200 - 2490

2490 - 2690

+45° , -45° 2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

17.5

18.1

18.2

17.1 ±0.5

17.3 ±0.5

17.9 ±0.4

18.0 ±0.5

16.8

17.1

17.6

18.0

16.5 ±0.5

16.9 ±0.5

17.4 ±0.4

17.7 ±0.5

> 17

> 17

> 18

> 17

Horizontal 3dB beam width (°)

66 ±4.7

66 ±5.2

60 ±5.3

58 ±5.1

Vertical 3dB beam width (°)

6.6 ±0.6

6.0 ±0.5

5.2 ±0.5

4.8 ±0.4

> 27

> 27

> 26

> 20

> 19

>23

Top

at mid Tilt

17.3

over all Tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio, ±30°(dB)

> 25

Cross polar ratio (dB)

> 23

0°

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

221

2LnH Band 6-16 ports

Gain (dBi)

880 - 960

D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x65AOC4518R3v06 D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R 16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m Model: AOC4518R3v06 Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 369 x 149

Packing dimensions (H x W x D) (mm)

2965 x 435 x 240

Antenna weight (kg)

46.7

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

106

67.5 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1901 2769

Mast diameter supported (mm)

Frontal: 440 (at 150 km/h) Lateral: 265 (at 150 km/h) Maximum: 585 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

16 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

880 - 960 MHz

690 - 862 MHz

222

1427 - 2690 MHz

1695 - 2690 MHz

1695 - 2690 MHz

(Top)

(Bottom)

D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x65AOC4518R3v06 D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R 16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m Model: AOC4518R3v06 Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……LTy2 HWMxxx……LBy1

LTy2

CTy4

RTy6

LBy1

CBy3

RBy5

HWMxxx……CBy3 h

g

HWMxxx………..r1 HWMxxx……RBy5 HWMxxx……RTy6

r1

r2

g HWMxxx………..r2

h HWMxxx……CTy4 r - Red y - Yellow b - Blue C - Center array L - Left array R - Right array T - Top array B - Bottom array

223

2LnH Band 6-16 ports

Pin assignment according AISG

Multi-band B - 5 3LnH

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o) 690-862/ 880-960/ 690-960/ 1427-2690/ 1695-2690 690-862/ 880-960/ 690-960/ 1427-2690/ 1695-2690

Dimension(mm)

Model

Page

Array symbol

65/65/65/ 65/65

0-10/0-10/ 15/15.5/ 0-10/2-12/ EasyRET2.0 10 x 4.3-10 16/18/18 2-12

1999 x 469 x 206

APE4518R34v06

227

Z4

65/65/65/ 65/65

16/16.5/ 2-12/2-12/ 17/17.5i/ 2-12/2-12/ EasyRET2.0 10 x 4.3-10 18 2-12

2769 x 469 x 206

APE4518R25v07

230

Z4

Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Range (MHz) Beam Width (o) Downtilt (o)

Dimension(mm)

Model

Page

Array symbol

12 Ports - 3L3H

690-862/ 880-960/ 690-960/ 1427-2690/ 1695-2690/ 1695-2690 690-862/ 880-960/ 690-960/ 1427-2690/ 1695-2690/ 1695-2690

65/65/65/ 65/65/65

15/15.5/ 0-10/0-10/ 16/17.5/ 0-10/2-12/ EasyRET2.0 12 x 4.3-10 18/18 2-12/2-12

1999 x 469 x 206

ASI4518R21v06

233

Z5

65/65/65/ 65/65/65

16/16.5/ 2-12/2-12/ 17/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 18/18 2-12/2-12

2769 x 469 x 206

ASI4518R18v06

236

Z5

** Preliminary Issue

3LnH Band 10-16 Ports

10 Ports - 3L2H

Multi-band B - 5 3LnH

16 Ports - 3L5H Frequency 3dB Horizontal Electrical Gain (dBi) Tilt Method Connector Downtilt (o) Range (MHz) Beam Width (o)

Dimension(mm)

Model

Page

Array symbol

690-862/ 880-960/ 690-960/ 1427-2690/ 2*1695-2200 2*2490-2690

8 x 65

15/15.5/ 2-12/2-12/ 16/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 17/17/ 2-12/2-12/ 17.5/17.5 2-12/2-12

1999 x 469 x 206

AOC4518R9v06

239

Z7

690-862/ 880-960/ 690-960/ 1427-2690/ 4*1695-2690

8 x 65

16/16.5/ 17/17.5/ 17.5/17.5/ 17.5/17.5

2769 x 469 x 206

AOC4518R0v06

242

Z3

2-12/2-12/ 2-12/2-12/ EasyRET2.0 16 x 4.3-10 2-12/2-12/ 2-12/2-12

** Preliminary Issue

Array Symbol Type Type Z3

LTy2

Type Z4

Type Z5

Type Z7

RTy5 Ly1

Cy3 LBy1

RBy4

Lr1 Lr2

Rr3

Lr1

Cb1

Ly1

Rr2 Rr3

Lr1 Lr2

Cy2

Ry3

Lb1 Ly1

Rb2 Ry3

Rr3

Lr1 Lr2

Rr3

APE4518R34v06 DXXXXX-690-862/880-960/690-960/1427-2690/1695-2690-65/65/65/65/6515i/15.5i/16i/18i/18i-M/M/M/M/M-R EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960 (Rr3)

Frequency range (MHz)

690 - 803

790 - 862

1695 - 2690 (Ry2)

824 - 894

880 - 960

Polarization

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable

14.8

15.4

15.6

15.9

17.0

17.5

17.6

18.0

14.7 ±0.5

15.3 ±0.5

15.5 ±0.5

15.7 ±0.5

16.9 ±0.6

17.4 ±0.5

17.5 ±0.5

17.9 ±0.5

> 15

> 16

> 16

> 15

> 16

> 16

> 16

> 16

70 ±5

69 ±5

68 ±5

66 ±5

62 ±5

60 ±5

60 ±5

58 ±5

11.0 ±0.8

9.8 ±0.5

9.5 ±0.5

8.8 ±0.5

6.5 ±0.5

5.9 ±0.5

5.2 ±0.5

4.8 ±0.5

> 26

> 26

> 27

> 20

> 20

> 18

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB) Cross polar ratio (dB)

> 22 0°

> 20

Max. power per input (W)

> 23

> 24

> 24

> 25

> 20

> 20

> 20

> 20

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

3LnH Band 10-16 Ports

Gain (dBi)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

50

Grounding

DC Ground

Electrical Properties 1427 - 2690 (Ly1)

Frequency range (MHz)

690 - 862 (Lr1)

1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

790 - 862

880 - 960 (Lr2)

+45° , -45°

Electrical downtilt (°) Gain (dBi)

690 - 803

0 - 10 , continuously adjustable , each band separately

2 - 12 , continuously adjustable at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.2

17.3

17.4

17.8

18.0

14.5

15.1

15.5

16.1 ±0.5

17.2 ±0.5

17.3 ±0.5

17.7 ±0.5

17.9 ±0.5

14.4 ±0.5

15.0 ±0.5

15.4 ±0.5

>15

>16

>16

>15

>15

> 15

> 15

> 16

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

70 ±5

69 ±5

66 ±5

4.8 ±0.5

11.0 ±0.8

9.8 ±0.5

8.8 ±0.5

> 22

> 23

> 24

> 20

> 20

> 20

7.9 ±0.5

6.6 ±0.5

5.8 ±0.5

5.2 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc)

> 25 0°

> 15

> 28

> 28

> 28

> 28

> 16

> 16

> 16

> 15

250 (at 50℃ ambient temperature)*

400 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

≤ -150 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

227

APE4518R34v06 DXXXXX-690-862/880-960/690-960/1427-2690/1695-2690-65/65/65/65/6515i/15.5i/16i/18i/18i-M/M/M/M/M-R EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.0m 144

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 469 x 206

Packing dimensions (H x W x D) (mm)

2255 x 535 x 285

Antenna weight (kg)

40.0

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

61.1 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1420 1999

Mast diameter supported (mm)

Frontal: 600 (at 150 km/h) Lateral: 365 (at 150 km/h) Maximum: 795 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

1427 - 2690 MHz

228

690 - 960 MHz

880 - 960 MHz

1695 - 2690 MHz

APE4518R34v06 DXXXXX-690-862/880-960/690-960/1427-2690/1695-2690-65/65/65/65/6515i/15.5i/16i/18i/18i-M/M/M/M/M-R EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

3LnH Band 10-16 Ports

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr2 HWMxxx……Lr1

Lr1 Lr2

HWMxxx……Ly1 HWMxxx……Ry2 HWMxxx……Rr3

Ly1

Ry2

Rr3

r - Red y - Yellow L - Left array R - Right array C - Center array

229

APE4518R25v07 DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 862 (Lr1)

Frequency range (MHz)

690 - 803

Polarization

790 - 862

690 - 803

790 - 862

+45° , -45°

Electrical downtilt (°)

824 - 894

880 - 960

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt Gain (dBi)

690 - 960 (Rr3)

880 - 960 (Lr2)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.4

16.0

16.5

15.8

16.3

16.6

16.9

15.2 ±0.5

15.9 ±0.5

16.2 ±0.5

15.6 ±0.5

16.2 ±0.5

16.4 ±0.5

16.6 ±0.5

>15

>15

>16

>15

>15

>16

>16

70 ±5

69 ±5

65 ±4

70 ±5

69 ±5

68 ±4

65 ±4

8.3 ±0.5

7.4 ±0.5

6.4 ±0.4

8.7 ±0.7

7.8 ±0.6

7.5 ±0.6

7.2 ±0.5

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 23

> 25

> 22

> 24

> 24

> 25

Cross polar ratio (dB)

> 19

> 22

> 22

> 19

> 21

> 22

> 22

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)*

500 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690 (Ly1) Frequency range (MHz)

1427 1518

1695 1990

1920 2200

1695 - 2690 (Ry2)

2200 2490

2490 2690

1695 1990

1920 2200

2200 2490

Polarization

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

Gain (dBi)

+45° , -45°

at mid Tilt

16.2

17.3

17.4

17.8

18.0

17.1

17.4

17.5

18.0

over all Tilts

16.1 ±0.5

17.2 ±0.6

17.3 ±0.6

17.7 ±0.5

17.8 ±0.5

17.0 ±0.6

17.3 ±0.6

17.4 ±0.6

17.8 ±0.7

> 15

> 16

> 16

> 16

> 15

> 16

> 17

> 16

> 16

62 ±7

61 ±7

62 ±6

58 ±6

58 ±5

62 ±6

61 ±5

60 ±5

58 ±5

5.8 ±0.4

5.2 ±0.4

4.8 ±0.4

6.5 ±0.5

5.7 ±0.5

5.2 ±0.4

4.8 ±0.4

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

7.9 ±0.4 6.5 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 25

Cross polar ratio (dB)

> 15

Max. power per input (W) Intermodulation IM3 (dBc)

0°

≥ 28

> 28

> 28

> 28

> 28

> 16

> 16

> 16

> 15

250 (at 50℃ ambient temperature)*

> 26

> 26

> 27

> 27

> 22

> 20

> 18

> 18

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

230

2490 2690

APE4518R25v07 DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.6m Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 469 x 206

Packing dimensions (H x W x D) (mm)

2960 x 535 x 275

Antenna weight (kg)

46.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

144

71.3 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1873 2769

Mast diameter supported (mm)

Frontal: 860 (at 150 km/h) Lateral: 535 (at 150 km/h) Maximum: 1140 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8°

3.1 kg

1 (Separate packing)

3LnH Band 10-16 Ports

Accessories

Pattern sample for reference

690 - 862 MHz

1427 - 2690 MHz

880 - 960 MHz

690 - 960 MHz

1695 - 2690 MHz

231

APE4518R25v07 DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

DC

n/c

RS-485B

4

5

6

7

8

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr2 HWMxxx……Lr1

Lr1 Lr2

HWMxxx……Ly1

Ly1

Ry2

HWMxxx……Ry2 HWMxxx……Rr3 r - Red y - Yellow L - Left array R - Right array

232

Rr3

ASI4518R21v06 DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15i/15.5i/16i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 3L3H 12-Port Antenna with 6 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

880 - 960

Polarization

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

0 - 10 , continuously adjustable at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

14.8

15.4

15.7

16.0

17.0

17.5

17.6

18.0

14.7 ±0.4

15.3 ±0.4

15.5 ±0.3

15.8 ±0.4

16.9 ±0.6

17.4 ±0.5

17.5 ±0.5

17.9 ±0.5

> 16

> 17

> 17

> 17

> 17

> 17

> 17

> 17

70 ±5

69 ±4

68 ±4

64 ±4

62 ±5

60 ±5

60 ±5

58 ±4

11.0 ±0.8

9.8 ±0.5

9.5 ±0.5

8.8 ±0.5

6.5 ±0.5

5.9 ±0.4

5.9 ±0.4

4.7 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB) Cross polar ratio (dB)

0°

> 22

> 23

> 24

> 24

> 26

> 27

> 27

> 28

> 22

> 22

> 22

> 22

> 22

> 20

> 20

> 18

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

3LnH Band 10-16 Ports

Gain (dBi)

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690

Frequency range (MHz)

690 - 862

1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

790 - 862

880 - 960

+45° , -45°

Electrical downtilt (°) Gain (dBi)

690 - 803

0 - 10 , continuously adjustable , each band separately

2 - 12 , continuously adjustable at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.2

17.3

17.4

17.9

18.0

14.5

15.1

15.5

16.1 ±0.5

17.2 ±0.5

17.3 ±0.5

17.8 ±0.5

17.9 ±0.5

14.4 ±0.4

15.0 ±0.4

15.4 ±0.4

>15

>17

>17

>16

>17

> 16

> 17

> 17

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

70 ±5

69 ±4

64 ±4

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

11.0 ±0.8

9.8 ±0.5

8.8 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc)

0°

> 25

> 28

> 28

> 28

> 28

> 22

> 23

> 24

> 15

> 16

> 17

> 16

> 15

> 22

> 22

> 22

250 (at 50℃ ambient temperature)*

400 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -150 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

233

ASI4518R21v06 DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15i/15.5i/16i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 3L3H 12-Port Antenna with 6 Integrated RCUs - 2.0m 144

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1999 x 469 x 206

Packing dimensions (H x W x D) (mm)

2255 x 535 x 285

Antenna weight (kg)

42.0

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

63.1 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1420 1999

Mast diameter supported (mm)

-40 .. +65 Frontal: 600 (at 150 km/h) Lateral: 365 (at 150 km/h) Maximum: 795 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

1427 - 2690 MHz

234

690 - 960 MHz

880 - 960 MHz

690 - 862 MHz

1695 - 2690 MHz

ASI4518R21v06 DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15i/15.5i/16i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 3L3H 12-Port Antenna with 6 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

3LnH Band 10-16 Ports

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr2 HWMxxx……Lr1 HWMxxx……Ly1 HWMxxx……Cy2

Ly1

Cy2

Ry3

HWMxxx……Ry3 HWMxxx……Rr3

Lr1 Lr2

Rr3

r - Red y - Yellow L - Left array R - Right array C - Center array

235

ASI4518R18v06 DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16.5i/17i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 3L3H 12-Port Antenna with 6 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

Polarization

690 - 960 690 - 803

790 - 862

+45° , -45°

Electrical downtilt (°) Gain (dBi)

880 - 960

790 - 862

824 - 894

880 - 960

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.4

16.0

16.5

15.8

16.4

16.7

17.0

15.2 ±0.5

15.9 ±0.5

16.2 ±0.5

15.6 ±0.5

16.3 ±0.5

16.5 ±0.5

16.7 ±0.5

>15

>15

>16

>15

>15

>16

>16

70 ±5

69 ±4

64 ±4

70 ±5

69 ±4

68 ±3

64 ±4

8.3 ±0.5

7.4 ±0.4

6.4 ±0.3

9.0 ±0.5

8.0 ±0.4

7.7 ±0.5

7.2 ±0.4

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 25

> 22

> 24

> 24

> 25

Cross polar ratio (dB)

> 20

> 24

> 24

> 20

> 24

> 24

> 24

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)*

500 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690

Frequency range (MHz)

2 x (1695 - 2690)

1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

Gain (dBi)

at mid Tilt

16.2

17.3

17.4

+45° , -45° 17.9

18.0

17.0

17.5

17.6

18.0

over all Tilts 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5 16.9 ±0.6 17.4 ±0.5 17.5 ±0.5 17.9 ±0.5

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

> 15

> 16

62 ±7

61 ±7

7.9 ±0.4 6.6 ±0.4

> 16

> 17

> 17

> 16

> 16

> 18

> 17

62 ±6

58 ±5

58 ±5

62 ±5

60 ±5

58 ±4

58 ±4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

6.5 ±0.5

5.6 ±0.4

5.2 ±0.2

4.8 ±0.3

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 28

> 28

> 28

> 28

> 27

> 27

> 27

> 27

Cross polar ratio (dB)

> 15

> 18

> 16

> 16

> 15

> 22

> 20

> 19

> 18

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

236

ASI4518R18v06 DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16.5i/17i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 3L3H 12-Port Antenna with 6 Integrated RCUs - 2.6m

Mechanical Properties

144

Antenna dimensions (H x W x D) (mm)

2769 x 469 x 206

Packing dimensions (H x W x D) (mm)

3024 x 535 x 285

Antenna weight (kg)

48.6

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

73.4 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1873 2769

Mast diameter supported (mm) Radome material

Frontal: 860 (at 150 km/h) Lateral: 535 (at 150 km/h) Maximum: 1140 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female Bottom

3LnH Band 10-16 Ports

Connector position

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8°

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

1427 - 2690 MHz

880 - 960 MHz

690 - 960 MHz

1695 - 2690 MHz

237

ASI4518R18v06 DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16.5i/17i/17.5i/18i/18i-M/M/M/M/M/M-R EasyRET 3L3H 12-Port Antenna with 6 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Lr2 HWMxxx……Lr1 HWMxxx……Ly1

Ly1

Cy2

Ry3

HWMxxx……Cy2 HWMxxx……Ry3 HWMxxx……Rr3 r - Red L - Left array

238

Lr1 Lr2

y - Yellow R - Right array C - Center array

Rr3

AOC4518R9v06 D8X-690-862/880-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)8x65-15i/15.5i/16i/17.5i/17i/17i/17.5i/17.5i-8xM-R EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960 (Rr3) 690 - 803

Polarization Electrical downtilt (°) Gain (dBi)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

790 - 862

1427 - 2690 (Cy2)

824 - 894

1427 1518

880 - 960

1695 1990

1920 2200

+45° , -45°

+45° , -45° 2 - 12 , continuously adjustable

14.8

15.4

15.6

15.9

16.2

14.7 ±0.5 15.3 ±0.5 15.5 ±0.5 15.7 ±0.5 16.1 ±0.5 > 15

> 16

> 16

> 15

17.3

17.4

17.8

18.0

17.2 ±0.5

17.3 ±0.5

17.7 ±0.5

17.9 ±0.5

>16

>16

>16

>15

>15

70 ±5

69 ±5

68 ±5

66 ±5

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

11.0 ±0.8

9.8 ±0.5

9.5 ±0.5

8.8 ±0.5

7.9 ±0.5

6.5 ±0.5

5.8 ±0.5

5.2 ±0.5

4.8 ±0.5

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Cross polar ratio (dB)

0°

Max. power per input (W)

2490 2690

2 - 12 , continuously adjustable

VSWR

Front to back ratio , ±30° (dB)

2200 2490

> 22

> 23

> 24

> 24

> 25

> 28

> 28

> 28

> 26

> 20

> 20

> 20

> 20

> 15

> 16

> 16

> 16

> 15

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω) Grounding

50

50

DC Ground

DC Ground

3LnH Band 10-16 Ports

Frequency range (MHz)

Electrical Properties 690 - 862 (Lr1)

Frequency range (MHz)

690 - 803

790 - 862

880 - 960 (Lr2)

Polarization

1920 - 2200

2 x (2490 - 2690) (Ly1/Ry3)

+45° , -45° 2 - 12 , continuously adjustable , each band separately

Electrical downtilt (°) Gain (dBi)

2 x (1695 - 2200) (Lb1/Rb2) 1695 - 1990

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable, each band separately

14.5

15.1

15.5

16.9

17.3

17.7

14.4 ±0.5

15.0 ±0.5

15.4 ±0.5

16.8 ±0.5

17.2 ±0.5

17.6 ±0.5

> 15

> 15

> 16

> 16

> 17

> 16

70 ±5

69 ±5

66 ±5

63 ±6

61 ±5

58 ±5

11.0 ±0.8

9.8 ±0.5

8.8 ±0.5

6.5 ±0.5

5.8 ±0.5

4.8 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc)

0°

> 22

> 23

> 24

> 26

> 25

> 26

> 20

> 20

> 20

> 20

> 20

> 18

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 900 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

239

AOC4518R9v06 D8X-690-862/880-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)8x65-15i/15.5i/16i/17.5i/17i/17i/17.5i/17.5i-8xM-R EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.0m Mechanical Properties

144

Antenna dimensions (H x W x D) (mm)

1999 x 469 x 206

Packing dimensions (H x W x D) (mm)

2255 x 535 x 285

Antenna weight (kg)

44.0

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

63.0 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1420

50 - 115

Radome material

Frontal: 600 (at 150 km/h) Lateral: 365 (at 150 km/h) Maximum: 795 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

16 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 862 MHz

1427 - 2690 MHz

240

880 - 960 MHz

1695 - 2200 MHz

690 - 960 MHz

2490 - 2690 MHz

1999

Mast diameter supported (mm)

AOC4518R9v06 D8X-690-862/880-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)8x65-15i/15.5i/16i/17.5i/17i/17i/17.5i/17.5i-8xM-R EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

3LnH Band 10-16 Ports

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx………Lr2 HWMxxx………Lr1 HWMxxx……...Lb1 h

g

HWMxxx……..Cy2 HWMxxx……..Rb2

Lb1 Ly1

Ry3 Cy2 Rb2 Ry3

HWMxxx……...Rr3 g HWMxxx……..Ry3

Lr1 Lr2

Rr3

h HWMxxx……...Ly1 r - Red y - Yellow b- Blue L - Left array C - Center array R - Right array

241

AOC4518R0v06 D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 862

Frequency range (MHz)

690 - 803

790 - 862

Polarization

690 - 960 690 - 803

790 - 862

+45° , -45°

Electrical downtilt (°)

824 - 894

880 - 960

+45° , -45°

2 - 12 , continuously adjustable , each band separately

at mid Tilt Gain (dBi)

880 - 960

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.4

16.0

16.5

15.8

16.4

16.7

16.9

15.2 ±0.5

15.9 ±0.5

16.2 ±0.5

15.6 ±0.5

16.3 ±0.5

16.5 ±0.5

16.7 ±0.5

>15

>15

>16

>15

>15

>16

>16

70 ±5

69 ±4

64 ±4

70 ±5

69 ±4

68 ±3

64 ±4

8.3 ±0.5

7.4 ±0.4

6.4 ±0.3

9.0 ±0.5

8.0 ±0.4

7.7 ±0.5

7.2 ±0.4

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

< 1.5 ≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 22

> 24

> 25

> 22

> 24

> 24

> 25

Cross polar ratio (dB)

> 20

> 24

> 24

> 20

> 24

> 24

> 24

0°

Max. power per input (W) Intermodulation IM3 (dBc)

400 (at 50℃ ambient temperature)*

500 (at 50℃ ambient temperature)*

≤ -150 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690

Frequency range (MHz)

4 x (1695 - 2690)

1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

Polarization

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

at mid Tilt

16.2

17.3

17.4

+45° , -45° 17.9

18.0

over all Tilts 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5 Gain (dBi)

Bottom Top

at mid Tilt over all Tilts

16.6

17.0

17.2

17.7

16.5 ±0.5

16.9 ±0.5

17.1 ±0.5

17.5 ±0.5

at mid Tilt

16.7

17.1

17.2

17.7

16.6 ±0.5

17.0 ±0.5

17.1 ±0.5

17.5 ±0.5

> 17

> 16

> 16

> 16

> 16

61 ±5

61 ±5

59 ±4

58 ±4

7.6 ± 0.5

6.7 ± 0.4

6.0 ± 0.3

5.4 ± 0.3

6.5 ± 0.5

5.8 ± 0.4

5.2 ± 0.3

4.8 ± 0.3

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam Bottom width (°) Top

> 15

> 16

> 16

> 17

62 ±7

61 ±7

62 ±6

58 ±5

58 ±5

7.9 ±0.4

6.6 ±0.4

5.8 ±0.3

5.2 ±0.3

4.8 ±0.2

VSWR

< 1.5

< 1.5

Cross polar isolation (dB)

≥ 28

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 28

> 28

> 28

> 28

> 25

> 25

> 25

> 26

Cross polar ratio (dB)

> 15

> 18

> 16

> 16

> 15

> 20

> 18

> 17

> 18

Max. power per input (W) Intermodulation IM3 (dBc)

0°

250 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω) Grounding

50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

242

AOC4518R0v06 D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 469 x 206

Packing dimensions (H x W x D) (mm)

3024 x 535 x 285

Antenna weight (kg)

144

52.8

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

77.8 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 860 (at 150 km/h) Lateral: 535 (at 150 km/h) Maximum: 1140 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

2769

50 - 115

Radome material

1873

Mast diameter supported (mm)

200

Survival wind speed (km/h)

250

Connector

16 x 4.3-10 Female

Connector position

Bottom

Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8°

3.1 kg

1 (Separate packing)

3LnH Band 10-16 Ports

Accessories

Pattern sample for reference

690 - 862 MHz

880 - 960 MHz

690 - 960 MHz

1427 - 2690 MHz

1695 - 2690 MHz

1695 - 2690 MHz

(Bottom)

(Top)

243

AOC4518R0v06 D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)s)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx………Lr2

RTy5

LTy2

HWMxxx………Lr1 h

Cy3

HWMxxx……LBy1

g

HWMxxx……..Cy3 HWMxxx……RBy4 HWMxxx……...Rr3 g

LBy1 Lr1 Lr2

HWMxxx……RTy5

h HWMxxx……LTy2 r - Red L - Left array T - Top array

244

y - Yellow b - Blue C - Center array R - Right array B - Bottom array

RBy4 Rr3

B. Passive Antenna Multi-beam 1. Dual-beam Antenna

Frequency 3dB Horizontal Electrical Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Tilt Method

Connector

Dimension(mm)

Model

Page

690-960/ 690-960

33(-30)/ 33(+30)

18.5/18.5

0-10/0-10

EasyRET2.0

4 x 4.3-10

2090 x 590 x 169

AMB4519R0v06

248

1710-2200/ 1710-2200

33(-30)/ 33(+30)

19.5/19.5

2-12/2-12

EasyRET2.0

4 x 4.3-10

1468 x 349 x 166

AMB4520R5v06

250

1695-2690/ 1695-2690

33(-30)/ 33(+30)

20/20

2-12/2-12

EasyRET2.0

4 x 4.3-10

1499 x 399 x 196

AMB4520R8v06

252

Frequency 3dB Horizontal Electrical Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Tilt Method

Connector

Dimension(mm)

Model

Page

690-960/ 1710-2200/ 1710-2200

65/ 33(-30)/ 33(+30)

EasyRET2.0

6 x 4.3-10

2022 x 359 x 178

AMB4520R2v06

254

690-960/ 1695-2690/ 1695-2690/ 1695-2200/ 1695-2200

65/65/65/ 33(-30)/ 33(+30)

17/17.5/ 0-10/2-12/ 17.5/18.5/ 2-12/0-10/ 18.5 0-10

EasyRET2.0 10 x 4.3-10

2685 x 359 x 178

AMB4519R2v06

257

690-960/ 1695-2200/ 1695-2200/ 2490-2690/ 2490-2690/ 1695-2200/ 1695-2200

65/65/65/ 65/65/ 33(-30)/ 33(+30)

17/ 0-10/ 17.5/17.5/1 2-12/2-12/ 8/18/ 2-12/2-12/ 18.5/18.5 0-10/0-10

EasyRET2.0 14 x 4.3-10

2685 x 359 x 178

AMB4519R4v06

260

1710-2690/ 1710-2690/ 1710-2200/ 1710-2200

65/65/ 33(-30)/ 33(+30)

EasyRET2.0

2688 x 349 x 166

AMB4520R4v06

263

** Preliminary Issue

16/19.5/ 19.5

18/18/ 19.5/19.5

0-10/2-12/ 2-12

0-12/0-12/ 2-12/2-12

8 x 4.3-10

Multi-beam

2. Hybrid Multi-beam Antenna

Multi-beam 3. Dual-band Dual-beam Antenna

Frequency 3dB Horizontal Electrical Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Tilt Method

Connector

Dimension(mm)

Model

Page

790-960/ 790-960/ 1710-2200/ 1710-2200

2-12/2-12/ 2-12/2-12

EasyRET2.0

8 x 4.3-10

2090 x 590 x 169

AMB4519R3v06

266

Frequency 3dB Horizontal Electrical Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Tilt Method

Connector

Dimension(mm)

Model

Page

1710-2200/ 1710-2200/ 1710-2200/ 1710-2200

EasyRET2.0

8 x 4.3-10

2688 x 349 x 166

AMB4520R6v06

269

2-12/2-12/ 2-12/2-12

EasyRET2.0

8 x 4.3-10

2099 x 399 x 196

AMB4519R6v06

271

19.5/19.5/ 2-12/2-12/ 19.5/19.5 2-12/2-12

EasyRET2.0

8 x 4.3-10

2550 x 399 x 196

AMB4520R9v06

274

Frequency 3dB Horizontal Electrical Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Tilt Method

Connector

Dimension(mm)

Model

Page

1710-2200/ 1710-2200/ 1710-2200

EasyRET2.0

6 x 4.3-10

1499 x 449 x 115

AMB4521R0v06

277

33(-30)/ 33(+30)/ 33(-30)/ 33(+30)

16/16/ 18.5/18.5

4. 4T4R Dual-beam Antenna

1695-2690/ 1695-2690/ 1695-2690/ 1695-2690 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690

33(-30)/ 33(+30)/ 33(-30)/ 33(+30) 33(-30)/ 33(+30)/ 33(-30)/ 33(+30) 33(-30)/ 33(+30)/ 33(-30)/ 33(+30)

19.5/19.5/ 2-12/2-12/ 19.5/19.5 2-12/2-12

19/19/ 19/19

5. Triple-beam Antenna

22(-30)/ 22(0)/ 22(+30)

** Preliminary Issue

21/21/21

2-12/2-12/ 2-12

Multi-beam 6. Hybrid 4T4R Dual-beam Antenna

Frequency 3dB Horizontal Electrical Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o) 690-960/ 1695-2690/ 1695-2690/ 1695-2200/ 1695-2200 690-960/ 690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690 690-960/ 690-960/ 1695-2690/ 1695-2690/ 1695-2690/ 1695-2690

Connector

Dimension(mm)

Model

Page

0-10/2-12/ 2-12/2-12/ 2-12

EasyRET2.0 10 x 4.3-10

2685 x 359 x 178

AMB4519R5v06

279

65/65/ 33(-30)/ 33(+30)/ 33(-30)/ 33(+30)/

15.5/15.5/ 2-12/2-12/ 18.5/18.5/ 2-12/2-12/ 18.5/18.5 2-12/2-12

EasyRET2.0 12 x 4.3-10

2009 x 499 x 206

**AMB4519R13v06

282

65/65/ 33(-30)/ 33(+30)/ 33(-30)/ 33(+30)/

16.5/16.5/ 2-12/2-12/ 19/19/ 2-12/2-12/ 19/19 2-12/2-12

EasyRET2.0 12 x 4.3-10

2769 x 499 x 206

**AMB4519R9v06

285

65/ 33(-30)/ 33(+30)/ 33(-30)/ 33(+30)/

17/ 19/19/ 19/19

Tilt Method

Multi-beam

** Preliminary Issue

AMB4519R0v06 2MX-690-960-33-18.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 10, continuously adjustable

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.6

18.0

18.2

18.3

16.5 ±0.5

17.8 ±0.4

18.0 ±0.3

18.2 ±0.3

> 16

> 17

> 18

> 18

39 ±3

37 ±3

36 ±2

34 ±2

10.0 ±0.5

9.2 ±0.3

8.9 ±0.3

8.3 ±0.3

± 27

± 25

VSWR

< 1.5

Horizontal beam centers (°)

± 30

± 28

Same beam: ≥ 22

Cross polar isolation (dB)

Same beam: ≥26 ≥ 18

Beam to beam isolation (dB) Front to back ratio, ±30° (dB)

> 25

Cross polar ratio at boresight (dB)

> 17

Max. power per input (W)

> 26

> 26

> 26

> 22

> 23

> 23

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

144

Antenna dimensions (H x W x D) (mm)

2090 x 590 x 169

Packing dimensions (H x W x D) (mm)

2350 x 705 x 275

Antenna weight (kg)

36.1

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

49.1 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 1330 (at 150 km/h) Lateral: 190 (at 150 km/h) Maximum: 1330 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

248

Model

Description

Weight

Units per antenna

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

2090

50 - 115

1267

Mast diameter supported (mm)

AMB4519R0v06 2MX-690-960-33-18.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Multi-beam

Integrated RET S/N: HWMxxx…….r HWMxxx……rr r - Red

Pattern sample for reference

690 - 960 MHz (rr-30)

690 - 960 MHz (r+30)

249

AMB4520R5v06 2MX-1710-2200-33-19.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 1710 - 2200

Frequency range (MHz)

1710 - 1880

1850 - 1990

Polarization

1920 - 2200

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

18.6

19.2

19.5

18.4 ±0.6

19.0 ±0.6

19.3 ±0.4

> 18

> 18

> 18

36 ±2

33 ±2

31 ±2

7.2 ±0.4

6.9 ±0.4

6.6 ±0.4

VSWR

< 1.5 Same beam: ≥ 28

Cross polar isolation (dB)

≥ 18（≥ 25@1805-1880&2110-2170MHz）

Beam to beam isolation (dB) Front to back ratio, ±30° (dB)

> 32

> 32

> 34

Cross polar ratio at boresight (dB)

> 20

> 20

> 20

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

1468 x 349 x 166

Packing dimensions (H x W x D) (mm)

1870 x 415 x 240

Antenna weight (kg)

18.5

Clamps weight (kg)

3.0 (2 units)

Packing weight (kg)

29.5 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 450 (at 150 km/h) Lateral: 130 (at 150 km/h) Maximum: 470 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

250

1286

50 - 115

1468

Mast diameter supported (mm)

AMB4520R5v06 2MX-1710-2200-33-19.5i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Multi-beam

Integrated RET S/N: HWMxxx……b1 HWMxxx……b2 r - Red

b - Blue

Pattern sample for reference

1710 - 2200 MHz (b2-30)

1710 - 2200 MHz (b1+30)

251

AMB4520R8v06 2MX-1695-2690-33-20i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.5m Antenna Specifications Electrical Properties 1695 - 2690

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

19.0

19.6

20.0

20.2

18.8 ±0.6

19.4 ±0.4

19.8 ±0.5

20.0 ±0.6

> 16

> 16

> 16

> 16

37 ±4

36 ±3

34 ±3

32 ±3

7.1 ±0.5

6.3 ±0.6

5.6 ±0.4

5.1 ±0.3

±31

±31

±31

±32

VSWR

< 1.5

Horizontal beam centers (°)

≥ 28

Cross polar isolation (dB)

≥ 25

Port to port isolation(dB) Front to back ratio, ±30° (dB)

> 28

> 28

> 28

> 29

Cross polar ratio at boresight (dB)

> 15

> 16

> 15

> 16

Max. power per input (W)

250 (at 50℃ ambient temperature)

Total power (W)

700 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1509 x 399 x 196

Packing dimensions (H x W x D) (mm)

1785 x 480 x 250

Antenna weight (kg)

22.5

Clamps weight (kg)

106

3.6 (2 units)

Antenna packing weight (kg)

32.9 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1310 1509

Radome material

Frontal: 400 (at 150 km/h) Lateral: 235 (at 150 km/h) Maximum: 510 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 16 °

2.1 kg

1 (Separate packing)

252

AMB4520R8v06 2MX-1695-2690-33-20i-M-R EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.5m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Multi-beam

Integrated RET S/N: HWMxxx……y1 HWMxxx……y2 y - Yellow

Pattern sample for reference

1695 - 2690 MHz (y2)

1695 - 2690 MHz (y1)

253

AMB4520R2v06 2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization Electrical downtilt (°) Gain (dBi)

824 - 894

880 - 960

+45° , -45° 0 - 10 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.4

15.7

15.8

16.0

15.3 ±0.5

15.6 ±0.5

15.7 ±0.5

15.8 ±0.5

> 16

> 18

> 17

> 17

63 ±2.5

60 ±2.5

60 ±2.5

59 ±3

10.6 ±0.7

9.5 ±0.5

9.2 ±0.4

8.7 ±0.4

> 24

> 24

> 24

> 18

> 17

> 17

VSWR

< 1.5

Cross polar isolation (dB)

≥ 25 ≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 21

Cross polar ratio (dB)

> 17

0°

Max. power per input (W)

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties Frequency range (MHz)

1710 - 2200 1710 - 1990

Polarization Electrical downtilt (°) Gain (dBi)

1920 - 2200 +45° , -45°

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable 18.7

19.4

18.5 ±0.8

19.2 ±0.5

> 17

> 17

32 ±1

30 ±1

6.2 ±0.5

VSWR Horizontal beam centers (°)

5.6 ±0.4 < 1.5

± 30

± 26 Same beam: ≥ 25

Cross polar isolation (dB) Beam to beam isolation(dB)

≥ 18

Interband isolation (dB)

≥ 28

Front to back ratio, ±30° (dB)

> 28

Cross polar ratio at boresight (dB)

> 17

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

> 28 > 15 250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

254

AMB4520R2v06 2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2022 x 359 x 178

Packing dimensions (H x W x D) (mm)

2400 x 430 x 255

Antenna weight (kg)

25.0

Clamps weight (kg)

3.6 (2 nuits)

Antenna packing weight (kg)

106

39.7 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 to +65

Max. operational wind speed (km/h)

1355

Frontal: 655 (at 150 km/h) Lateral: 200 (at 150 km/h) Maximum: 690 (at 150 km/h)

Wind load (N)

2022

Radome material

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Model

Description

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 °

Weight

Units per antenna

2.1 kg

1 (Separate packing)

Multi-beam

Item

Pattern sample for reference

690 - 960 MHz

1710 - 2200 MHz (b2-30)

1710 - 2200 MHz (b1+30)

255

AMB4520R2v06 2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……r1 HWMxxx……b1 HWMxxx……b2 r - Red

256

b - Blue

AMB4519R2v06 2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 960 Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2690)

824 - 894

880 - 960

Polarization

1920 2200

2200 2490

2490 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1695 1990

2 - 12 , continuously adjustable , each band separately

0 - 10 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.9

16.0

16.1

16.4

15.7 ±0.4 15.8 ±0.5 15.9 ±0.4 16.2 ±0.5 > 18

> 19

> 18

16.9

17.1

17.2

17.3

16.8 ±0.6

17.0 ±0.5

17.0 ±0.5

17.2 ±0.5

> 17

> 17

> 17

> 17

> 18

68 ±4

67 ±4

67 ±3

66 ±4

60 ±5

61 ±5

63 ±5

58 ±5

9.5 ±0.6

8.8 ±0.6

8.4 ±0.6

7.8 ±0.4

6.5 ±0.6

5.8 ±0.4

5.0 ±0.5

4.8 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 25

Interband isolation (dB)

≥ 28

≥ 28 ≥ 28

Front to back ratio, ±30° (dB)

> 25

> 26

> 26

> 26

> 26

> 27

> 27

> 28

Cross polar ratio (dB)

> 15

> 17

> 17

> 17

> 17

> 20

> 20

> 20

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Frequency range (MHz)

1695 - 2200 1695 - 1990

Polarization

1920 - 2200 +45° , -45°

Electrical downtilt (°) Gain (dBi)

Multi-beam

Electrical Properties

0 - 10 , continuously adjustable

at mid Tilt over all Tilts

17.3

18.1

17.1 ±0.6

17.9 ±0.6

> 17

> 17

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

33 ±3

30 ±3

7.2 ±0.5

6.5 ±0.5

VSWR Horizontal beam centers (°)

< 1.5 ± 29

± 27 Same beam: ≥ 25

Cross polar isolation (dB)

≥ 18

Beam to beam isolation (dB)

≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 27

> 29

Cross polar ratio at boresight (dB)

> 15

> 17

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

257

AMB4519R2v06 2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

2685 x 359 x 178

Packing dimensions (H x W x D) (mm)

2985 x 425 x 255

Antenna weight (kg)

35.0

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

54.1 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1837

Fiberglass

2685

Radome material

Frontal : 910 (at 150 km/h) Lateral: 275 (at 150 km/h) Maximum: 960 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0-8°

3.1 kg

1 (Separate packing)

Pattern sample for reference

258

690 - 960 MHz

1695 - 2690 MHz

1695 - 2200 MHz (b2-30)

1695 - 2200 MHz (b1+30)

AMB4519R2v06 2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

Integrated RET S/N: HWMxxx…..…b1

Ly1

Ry2

HWMxxx……Ly1

r1

HWMxxx…..…r1 HWMxxx……Ry2

b1

b2

HWMxxx…..…b2 r - Red y - Yellow b - Blue L - Left array R - Right array

259

Multi-beam

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

AMB4519R4v06 2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

2 x (1695 - 2200)

824 - 894

880 - 960

Polarization

1920 - 2200

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1695 - 1990

2 x (2490 - 2690)

2 - 12, continuously adjustable, each band separately

0 - 10 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

15.9

16.1

16.3

16.5

15.7 ±0.4 15.9 ±0.5 16.1 ±0.4 16.3 ±0.5 > 18

> 19

> 18

17.1

17.6

18.0

17.0 ±0.4

17.4 ±0.4

17.8 ±0.5

> 17

> 17

> 17

> 18

68 ±4

67 ±4

67 ±3

66 ±4

60 ±5

61 ±5

58 ±5

9.5 ±0.6

8.8 ±0.6

8.4 ±0.6

7.8 ±0.4

6.4 ±0.6

5.8 ±0.4

4.8 ±0.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 25

≥ 28

Interband isolation (dB)

≥ 28

≥ 28

Front to back ratio, ±30° (dB)

> 25

> 26

> 26

> 26

> 26

> 27

> 28

Cross polar ratio (dB)

> 15

> 17

> 17

> 17

> 18

> 18

> 18

0°

Max. power per input (W)

500 (at 50℃ ambient temperature)*

250 (at 50℃ ambient temperature)*

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties Frequency range (MHz)

1695 - 2200 1695 - 1990

Polarization

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200 0 - 10 , continuously adjustable

at mid Tilt over all Tilts

17.3

18.1

17.1 ±0.6

17.9 ±0.6

> 17

> 17

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

33 ±3

30 ±3

7.2 ±0.5

6.5 ±0.5

VSWR Horizontal beam centers (°)

< 1.5 ± 29 Same beam: ≥ 25

Cross polar isolation (dB)

≥ 18

Beam to beam isolation (dB)

≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 27

Cross polar ratio at boresight (dB)

> 15

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

± 27

> 29 > 17 250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

260

AMB4519R4v06 2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m

Mechanical Properties

106

Antenna dimensions (H x W x D) (mm)

2685 x 359 x 178

Packing dimensions (H x W x D) (mm)

2985 x 425 x 255

Antenna weight (kg)

39.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

57.8 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

Max. operational wind speed (km/h)

1837

Frontal : 910 (at 150 km/h) Lateral: 275 (at 150 km/h) Maximum: 960 (at 150 km/h)

Wind load (N)

200

Survival wind speed (km/h)

2685

Mast diameter supported (mm)

250

Connector

14 x 4.3-10 Female

Connector position

Bottom

Accessories Downtilt kit

Model

Description

ASMDT0F01 Mechanical downtilt: 0 - 8 °

Weight

Units per antenna

3.1 kg

1 (Separate packing)

Multi-beam

Item

Pattern sample for reference

690 - 960 MHz

1695 - 2200 MHz (Bb2)

1695 - 2200 MHz

2490 - 2690 MHz

1695 - 2200 MHz (Bb1)

261

AMB4519R4v06 2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……...Ly1 HWMxxx…… LTb3

g

HWMxxx………..r1

HWMxxx……..Bb2 g HWMxxx……..Bb1 r - Red y - Yellow b - Blue L - Left array R - Right array T - Top array B - Bottom array

r1

RTb4 Ry2

b1

HWMxxx……RTb4 HWMxxx……..Ry2

262

LTb3 Ly1

Bb1

Bb2

AMB4520R4v06 2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5iM/M/M-R EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 2 x (1710 - 2690)

Frequency range (MHz)

1710 - 1990

1920 - 2200

Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2200 - 2490

0 - 12 , continuously adjustable , each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

17.0

17.3

17.6

17.7

16.9 ±0.5

17.2 ±0.4

17.4 ±0.5

17.5 ±0.4

> 18

> 20

> 19

> 19

67 ±3

64 ±2.5

62 ±2.5

61 ±2.5

6.9 ±0.5

6.3 ±0.3

5.5 ±0.5

5.0 ±0.3

> 27

> 27

> 27

> 19

> 22

> 22

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 27

Cross polar ratio (dB)

> 19

0°

Max. power per input (W)

250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1710 - 2200 1710 - 1880

Polarization

1920 - 2200

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1850 - 1990

Multi-beam

Frequency range (MHz)

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

2 - 12 , continuously adjustable 18.6

19.2

19.5

18.4 ±0.6

19.0 ±0.6

19.3 ±0.4

> 18

> 18

> 18

36 ±2

33 ±2

31 ±2

7.2 ±0.4

6.9 ±0.4

6.6 ±0.4

VSWR Horizontal beam centers (°)

< 1.5 ± 31

± 30

± 28

Same beam: ≥ 28

Cross polar isolation (dB)

≥ 18

Beam to beam isolation (dB)

≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 32

> 32

> 34

Cross polar ratio at boresight (dB)

> 20

> 20

> 20

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 960W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

263

AMB4520R4v06 2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5iM/M/M-R EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.6m

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2688 x 349 x 166

Packing dimensions (H x W x D) (mm)

2985 x 425 x 255

Antenna weight (kg)

32.5

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

48.5 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey -40 .. +65

2580 2688

Operational temperature (℃)

1834

Mast diameter supported (mm)

Frontal: 885 (at 150 km/h) Lateral: 255 (at 150 km/h) Maximum: 935 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D0 1

Mechanical downtilt: 0 - 8 °

2.1 kg

1 (Separate packing)

Pattern sample for reference

1710 - 2200 MHz (b2-30)

264

1710 - 2690 MHz

1710 - 2200 MHz (b1+30)

AMB4520R4v06 2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5i2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5iM/M/M-R M/M/M-R EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.6m EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.6m Model: AMB4520R4v06 Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: Multi-beam

HWMxxx….....b1 HWMxxx……Ly1 HWMxxx……Ry2 HWMxxx……..b2 r - Red L - Left array

y - Yellow R - Right array

265

AMB4519R3v06 2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 790 - 960

Frequency range (MHz)

790 - 862

1710 - 2200

824 - 894

880 - 960

Polarization

1710 - 1990

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

at mid Tilt

Gain (dBi)

over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

14.8

15.2

15.7

18.2

19.2

14.7 ±0.8

15.1 ±0.8

15.5 ±0.8

18.0 ±0.8

19.0 ±0.6

> 16

> 17

> 17

> 17

> 18

38 ±3

37 ±3

35 ±3

30 ±3

29 ±1.5

16.0 ±2.4

15.5 ±2.6

14.2 ±2.5

7.2 ±0.5

6.5 ±0.5

± 27

± 26

± 30

± 29

VSWR

< 1.5

Horizontal beam centers (°) Cross polar isolation (dB)

± 24

Same beam: ≥ 25

Same beam: ≥ 25

≥ 18

≥ 18

Beam to beam isolation(dB)

≥ 28

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 25

Cross polar ratio at boresight (dB)

> 18

Max. power per input (W)

> 30 > 17

500 (at 50℃ ambient temperature)

Total power (W)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2090 x 590 x 169

Packing dimensions (H x W x D) (mm)

2350 x 705 x 275

Antenna weight (kg)

38.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

55.0 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 1330 (at 150 km/h) Lateral: 190 (at 150 km/h) Maximum: 1330 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

> 18

250 (at 50℃ ambient temperature)

960 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc)

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

266

1920 - 2200

+45° , -45°

AMB4519R3v06 2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

Multi-beam

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

r1

r2

2090

Integrated RET S/N:

1267

144

HWMxxx……r1 HWMxxx……b1

b1

b2

HWMxxx……b2 HWMxxx……r2 r - Red

b - Blue

267

AMB4519R3v06 2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m Pattern sample for reference

268

790 - 960 MHz (r2-30)

790 - 960 MHz (r1+30)

1710 - 2200 MHz (b2-30)

1710 - 2200 MHz (b1+30)

AMB4520R6v06 2MXX-1710-2200/1710-2200-33/33-19i/19.5i-M/M-R EasyRET Dual-Band Dual-Beam Antenna with Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 2 x (1710 - 2200)

Frequency range (MHz)

1710 - 1880

1850 - 1990

Polarization

1920 - 2200

+45° , -45°

Electrical downtilt (°)

2 - 12 , continuously adjustable , each band separately

at mid Tilt Top

over all Tilts

Gain (dBi) Botto m

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

18.2

18.9

19.3

17.9 ±0.6

18.6 ±0.5

18.9 ±0.5

18.6

19.3

19.6

18.4 ±0.6

19.0 ±0.5

19.3 ±0.5

> 18

> 18

> 18

36 ±2

33 ±2

31 ±2

7.2 ±0.4

6.9 ±0.4

6.6 ±0.4

VSWR

< 1.5

Horizontal beam centers (°)

± 31

± 30

± 28

Same beam: ≥ 28

Cross polar isolation (dB)

≥ 18

Beam to beam isolation (dB) Front to back ratio, ±30° (dB)

> 32

> 32

> 34

Cross polar ratio at boresight (dB)

> 20

> 20

> 20

Max. power per input (W)

250 (at 50℃ ambient temperature)

Total power (W)

960 (at 50℃ ambient temperature)

Impedance (Ω)

Multi-beam

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2688 x 349 x 166

Packing dimensions (H x W x D) (mm)

2985 x 425 x 255

Antenna weight (kg)

32.5

Clamps weight (kg)

3.6 (2 units)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

2688

50 - 115

1834

48.5 (Included clamps)

Mast diameter supported (mm)

2580

Antenna packing weight (kg)

Frontal: 885 (at 150 km/h) Lateral: 255 (at 150 km/h) Maximum: 935 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 - 8°

2.1kg

1 (Separate packing)

269

AMB4520R6v06 2MXX-1710-2200/1710-2200-33/33-19i/19.5i-M/M-R EasyRET Dual-Band Dual-Beam Antenna with Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

Lightning protection (kA)

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx….....Tb1 HWMxxx…….Bb2 HWMxxx…….Bb3 HWMxxx…….Tb4 b - Blue T - Top array

B - Bottom array

Pattern sample for reference

1710 - 2200 MHz (-30)

270

1710 - 2200 MHz (+30)

AMB4519R6v06 2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R EasyRET Dual-band Dual-Beam Antenna with Integrated RCUs - 2.0m Antenna Specifications Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Top Gain (dBi) Bottom

2 - 12 , continuously adjustable , each band separately at mid Tilt over all Tilts at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

18.0

18.4

18.9

19.4

17.8 ±0.6

18.2 ±0.4

18.7 ±0.7

19.2 ±0.6

18.0

18.6

19.2

19.7

17.8 ±0.6

18.4 ±0.5

19.0 ±0.6

19.5 ±0.5

> 16

> 16

> 15

> 16

37 ±4

36 ±3

34 ±3

32 ±3

8.9 ±0.8

8.0 ±0.6

7.1 ±0.5

6.4 ±0.3

±31

±31

±31

±32

> 28

> 28

> 29

> 16

> 15

> 16

VSWR

< 1.5

Horizontal beam centers (°)

≥ 28

Cross polar isolation (dB)

≥ 25

Port to port isolation(dB) Front to back ratio, ±30° (dB)

> 28

Cross polar ratio at boresight (dB)

> 15

Max. power per input (W)

250 (at 50℃ ambient temperature)

Total power (W)

900 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

50

Grounding

Multi-beam

Impedance (Ω)

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2099 x 399 x 196

Packing dimensions (H x W x D) (mm)

2285 x 465 x 250

Antenna weight (kg)

31.5

Clamps weight (kg)

3.6 (2 units)

Antenna packing weight (kg)

106

43.3 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 570 (at 150 km/h) Lateral: 340 (at 150 km/h) Maximum: 725 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0D01

Mechanical downtilt: 0 12°

2.1 kg

1 (Separate packing)

271

2099

Fiberglass

1383

Radome material

AMB4519R6v06 2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R EasyRET Dual-band Dual-Beam Antenna with Integrated RCUs - 2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……y2

y2

y4

y1

y3

HWMxxx……y1 HWMxxx……y3 HWMxxx……y4 y - Yellow T - Top array B - Bottom array

272

AMB4519R6v06 2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R EasyRET Dual-band Dual-Beam Antenna with Integrated RCUs - 2.0m

Pattern sample for reference

1695 - 2690 MHz (y2)

1695 - 2690 MHz (y4)

1695 - 2690 MHz (y1)

Multi-beam

1695 - 2690 MHz (y3)

273

AMB4520R9v06 2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R EasyRET Dual-band Dual-Beam Antenna with Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Top Gain (dBi) Bottom

2 - 12 , continuously adjustable , each band separately at mid Tilt over all Tilts at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

18.3

18.9

19.1

19.6

18.1 ±0.7

18.7 ±0.7

18.9 ±0.7

19.4 ±0.7

18.6

19.2

19.4

19.9

18.4 ±0.7

19.0 ±0.7

19.2 ±0.7

19.7 ±0.7

> 16

> 16

> 15

> 16

37 ±4

36 ±3

34 ±3

32 ±3

7.3 ±0.7

6.5 ±0.5

5.8 ±0.4

5.2 ±0.3

±32

±32

VSWR

< 1.5

Horizontal beam centers (°)

±32

±32 ≥ 28

Cross polar isolation (dB)

≥ 25

Port to port isolation(dB) Front to back ratio, ±30° (dB)

> 28

> 28

> 28

> 29

Cross polar ratio at boresight (dB)

> 15

> 15

> 15

> 15

Max. power per input (W)

250 (at 50℃ ambient temperature)

Total power (W)

1000 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2550 x 399 x 196

Packing dimensions (H x W x D) (mm)

2820 x 470 x 240

Antenna weight (kg)

33.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

46.5 (Included clamps) Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 710 (at 150 km/h) Lateral: 420 (at 150 km/h) Maximum: 910 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

8 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8 °

3.1 kg

1 (Separate packing)

274

2550

50 - 115

Radome material

1885

Mast diameter supported (mm)

AMB4520R9v06 2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R EasyRET Dual-band Dual-Beam Antenna with Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

Integrated RET S/N: HWMxxx……y2

y2

y4

y1

y3

HWMxxx……y1 HWMxxx……y3 HWMxxx……y4 y - Yellow T - Top array B - Bottom array

275

Multi-beam

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

AMB4520R9v06 2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R EasyRET Dual-band Dual-Beam Antenna with Integrated RCUs - 2.6m

Pattern sample for reference

276

1695 - 2690 MHz (y4)

1695 - 2690 MHz (y2)

1695 - 2690 MHz (y3)

1695 - 2690 MHz (y1)

AMB4521R0v06 3MX-1710-2200-22-21i-M-R EasyRET Single-Band Tri-Beam Antenna with Integrated RCUs - 1.4m Antenna Specifications Electrical Properties 1710 - 2200

Frequency range (MHz)

1710 - 1990

1920 - 2200

Polarization

+45° , -45°

Electrical downtilt (°) 20.3

20.8

over all Tilts (M beam)

20.1 ±0.6

20.6 ±0.5

at mid Tilt (L and R beam)

18.7

19.5

over all Tilts (L and R beam)

18.5 ±0.6

19.3 ±0.5

Side lobe suppression for first side lobe above main beam (dB)

> 17

> 17

Horizontal 3dB beam width (°) (M beam)

23 ±2

21 ±1.4

Horizontal 3dB beam width (°) (L and R beam)

28 ±2

24 ±1.4

Vertical 3dB beam width (°)

7.5 ±0.5

7.0 ±0.5

VSWR

< 1.5 Same beam: ≥ 25

Cross polar isolation (dB)

≥ 18

Beam to beam isolation (dB) Front to back ratio , ±30° (dB)

> 29

Cross polar ratio at boresight (dB)

> 17

Max. power per input (W)

> 30 > 17 250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

Multi-beam

Gain (dBi)

2 - 12 , continuously adjustable

at mid Tilt (M beam)

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1499 x 449 x 115

Packing dimensions (H x W x D) (mm)

1835 x 510 x 185

Antenna weight (kg)

22.6

Clamps weight (kg)

3.6 (2 units)

Mast diameter supported (mm)

1385

34.0 (Included clamps) 50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1499

Antenna packing weight (kg)

Frontal: 715 (at 150 km/h) Lateral: 85 (at 150 km/h) Maximum: 715 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

6 x 4.3-10 Female

Connector position

Bottom

Accessories Item Downtilt kit

Model

Description

ASMDT0D01 Mechanical downtilt: 0 - 16°

Weight

Units per antenna

2.1kg

1 (Separate packing)

277

AMB4521R0v06 3MX-1710-2200-22-21i-M-R EasyRET Single-Band Tri-Beam Antenna with Integrated RCUs - 1.4m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx..….b1 HWMxxx..….b2 HWMxxx..….b3 b - Blue Pattern sample for reference

1710 - 2200 MHz (b3-30)

278

1710 - 2200 MHz (b2)

1710 - 2200 MHz (b1+30)

AMB4519R5v06 2MXXX-690-960/1695-2200/1695-2200-65/33/33-17i/19i/19i-M/M/M-R EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m Antenna Specifications Electrical Properties 690 - 960

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

0 - 10 , continuously adjustable

at mid tile

15.8

16.2

16.4

16.6

15.7 ±0.5

16.0 ±0.5

16.3 ±0.5

16.5 ±0.5

> 16

> 16

> 16

> 16

Horizontal 3dB beam width (°)

65 ±4.0

63 ±4.0

62 ±3.0

60 ±3.0

Vertical 3dB beam width (°)

8.5 ±0.7

7.8 ±0.5

7.5 ±0.5

7.2 ±0.5

Gain (dBi)

over all tilts

Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 25 ≥ 30 (690 - 960 // 1695 - 2690)

Interband isolation (dB) Front to back ratio, ±30° (dB)

> 23

Cross polar ratio (dB)

> 17

0°

Max. power per input (W)

> 23

> 23

> 23

> 17

> 17

> 17

500 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

50

Impedance (Ω) Grounding

DC Ground

Electrical Properties 2 x (1695 - 2200) 1695 - 1880

Polarization

Gain (dBi) Top

at mid tile

2 - 12 , continuously adjustable , each band separately 17.6

18.0

18.5

17.4 ±0.6

17.9 ±0.6

18.3 ±0.6

17.2

17.6

18.0

17.0 ±0.6

17.4 ±0.5

17.8 ±0.5

> 15

> 15

> 15

34 ±3.0

32 ±3.0

30 ±3.0

Bottom

7.6 ±0.7

7.1 ±0.7

6.6 ±0.7

Top

7.6 ±0.7

7.1 ±0.7

6.6 ±0.7

over all tilts at mid tile over all tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

1920 - 2200

+45° , -45°

Electrical downtilt (°) Bottom

1850 - 1990

Multi-beam

Frequency range (MHz)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 25

Beam to beam isolation (dB)

≥ 18

Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio at boresight (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

≥ 30 (690 - 960 // 1695 - 2690) > 26 > 15 250 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

* Total power : 1000 W (at 50℃ ambient temperature) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

279

AMB4519R5v06 2MXXX-690-960/1695-2200/1695-2200-65/33/33-17i/19i/19i-M/M/M-R EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2685 x 359 x 178

Packing dimensions (H x W x D) (mm)

2985 x 425 x 255

Antenna weight (kg)

34.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

106

53.6 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1837 2685

Frontal : 910 (at 150 km/h) Lateral: 275 (at 150 km/h) Maximum: 960 (at 150 km/h)

10 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0-8°

3.1 kg

1 (Separate packing)

Pattern sample for reference

690 - 960 MHz

1695 - 2200 MHz (Tb4)

1695 - 2200 MHz (Bb3)

280

1695 - 2200 MHz (Tb2)

1695 - 2200 MHz (Bb1)

AMB4519R5v06 2MXXX-690-960/1695-2200/1695-2200-65/33/33-17i/19i/19i-M/M/M-R EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

Multi-beam

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: HWMxxx……Tb2 HWMxxx……Bb1

Tb2

Tb4

Bb1

Bb3

HWMxxx…..…r1 HWMxxx……Bb3 HWMxxx……Tb4 r - Red T - Top array

r1

b - Blue B - Bottom array

281

AMB4519R13v06 2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3315.5i/15.5i/18.5i/18.5i-M/M/M/M-R EasyRET Hybrid Hexa-beam Antenna with Integrated RCUs -2.0m Preliminary Issue Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

Polarization Electrical downtilt (°)

880 - 960

1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690

+45° , -45°

+45° , -45°

2 - 12, continuously adjustable , each band separately

2 - 12 , continuously adjustable , each band separately

14.8

Gain (dBi)

2 x (1695 - 2690)

824 - 894

15.0

15.2

15.5

Top

16.8

17.3

17.8

18.3

Bottom

16.5

17.0

17.5

18.0

Side lobe suppression for first side lobe above main beam (dB)

Typ.> 15

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

Typ.> 15

66

64

62

60

38

34

32

30

10.2

9.6

9.2

8.6

9.0

7.8

7.2

6.4

±29

±31

±31

±32

VSWR

< 1.5

Horizontal beam centers (°)

/

/

/

/ ≥ 25

Cross polar isolation (dB)

≥ 25

Port to port isolation (dB) Front to back ratio, ±30° (dB)

> 25

> 25

Cross polar ratio at boresight (dB)

> 15

> 15

Total power (W)

900 (at 50℃ ambient temperature)

Max. power per input (W)

400 (at 50℃ ambient temperature)

250 (at 50℃ ambient temperature)

≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2009 x 499 x 206

Packing dimensions (H x W x D) (mm)

2285 x 550 x 250

Antenna weight (kg)

42

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

58 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 12°

3.1 kg

1 (Separate packing)

2009

-40 .. +65 Frontal: 765 (at 150 km/h) Lateral: 395 (at 150 km/h) Maximum: 1000 (at 150 km/h)

1420

Operational temperature (℃)

282

144

AMB4519R13v06 2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3315.5i/15.5i/18.5i/18.5i-M/M/M/M-R EasyRET Hybrid Hexa-beam Antenna with Integrated RCUs -2.0m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

HWMxxx…….y2 HWMxxx…….y1

y2

y4

y1

y3

HWMxxx……..r1 HWMxxx……..r2 HWMxxx…….y3 HWMxxx…….y4

r1

r2

y - Yellow L - Left array R - Right array T - Top array B - Bottom array

283

Multi-beam

Integrated RET S/N:

AMB4519R13v06 2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3315.5i/15.5i/18.5i/18.5i-M/M/M/M-R EasyRET Hybrid Hexa-beam Antenna with Integrated RCUs -2.0m

Pattern sample for reference

1695 - 2690 MHz (y3)

1695 - 2690 MHz (y2)

1695 - 2690 MHz (y4)

1695 - 2690 MHz (y1)

690 - 960 MHz

284

AMB4519R9v06 2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3316.5i/16.5i/19i/19i-M/M/M/M-R EasyRET Hybrid Hexa-beam Antenna with Integrated RCUs -2.6m Preliminary Issue Antenna Specifications Electrical Properties 2 x (690 - 960)

Frequency range (MHz)

690 - 803

790 - 862

Polarization

824 - 894

880 - 960

+45° , -45°

Electrical downtilt (°)

2 - 12, continuously adjustable , each band separately

Gain (dBi)

15.4

15.8

16.0

Side lobe suppression for first side lobe above main beam (dB)

16.2

Typ.> 15

Horizontal 3dB beam width (°)

69

67

64

60

Vertical 3dB beam width (°)

8.5

7.8

7.5

7.2

VSWR

< 1.5

Cross polar isolation (dB)

≥ 25

Front to back ratio, ±30° (dB)

> 25

Cross polar ratio (dB)

0°

> 15

Max. power per input (W)

400 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

2 x (1695 - 2690)

Frequency range (MHz)

1695 - 1990

1920 - 2200

Polarization Electrical downtilt (°) Gain (dBi)

2200 - 2490

2490 - 2690

+45° , -45° 2 - 12 , continuously adjustable , each band separately Top

17.6

18.5

18.2

18.1

Bottom

17.1

18.0

17.7

17.6

32

30

5.6

5.1

Side lobe suppression for first side lobe above main beam (dB)

Typ.> 15

Horizontal 3dB beam width (°)

37

34

Vertical 3dB beam width (°)

7.2

6.3

VSWR

< 1.5

Cross polar isolation (dB)

≥ 25

Front to back ratio, ±30° (dB)

> 25

Cross polar ratio at boresight (dB)

> 15

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

250 (at 50℃ ambient temperature)* ≤ -153 (2 x 43 dBm carrier) 50 DC Ground

*Total power : 900 W (at 50℃ ambient temperature)

285

Multi-beam

Electrical Properties

AMB4519R9v06 2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3316.5i/16.5i/19i/19i-M/M/M/M-R EasyRET Hybrid Hexa-beam Antenna with Integrated RCUs -2.6m

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2769 x 499 x 206

Packing dimensions (H x W x D) (mm)

3030 x 550 x 250

Antenna weight (kg)

144

46

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

62 (Included clamps)

Mast diameter supported (mm)

50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

1885

Frontal: 1035 (at 150 km/h) Lateral: 545 (at 150 km/h) Maximum: 1355 (at 150 km/h)

Wind load (N) *

12 x 4.3-10 Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 8°

3.1 kg

1 (Separate packing)

Pattern sample for reference

286

1695 - 2690 MHz (y3)

1695 - 2690 MHz (y2)

1695 - 2690 MHz (y4)

1695 - 2690 MHz (y1)

690 - 960 MHz

2769

Radome material

AMB4519R9v06 2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3316.5i/16.5i/19i/19i-M/M/M/M-R EasyRET Hybrid Hexa-beam Antenna with Integrated RCUs -2.6m Integrated RET Specifications Properties RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 0.5 (when the motor does not work, 12 V) < 4.5 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 (typically, depending on antenna type)

RET connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Pin assignment according AISG Lightning protection (kA)

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

2.5 (10/350 μs) 10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation.

Integrated RET S/N: HWMxxx…….y2 HWMxxx…….y1

y2

y4

y1

y3

HWMxxx……..r1 HWMxxx……..r2 HWMxxx…….y3 HWMxxx…….y4 y - Yellow T - Top array

r1

r2

r - Red B - Bottom array

287

Multi-beam

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

B. Passive Antenna FDD+TDD Antenna Electrical Frequency 3dB Horizontal Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o) 690-960/ 690-960/ 1427-2690/ 1427-2690/ 1695-2690/ 2300-3800 690-960/ 690-960/ 1427-2200/ 1427-2200/ 2490-2690/ 2490-2690/ 1695-2690/ 3300-3800 690-960/ 690-960/ 1427-2690/ 1695-2200/ 1695-2200/ 2490-2690/ 2490-2690/ 2300-3800

Tilt Method

Connector

Dimension(mm)

Model

Page

65/65/65/ 65/65/65*

15.5/15.5/ 0-10/0-10/ 17.5/17.5/ 2-12/2-12/ 17.5/17 2-12/2-12

10 x 4.3-10 Female EasyRET2.0 + 2 x Cluster

2099 x 449 x 196

**ASI4518R42v06

290

65/65/65/ 65/65/65/ 65/65*

14.5/14.5/ 2-14/2-14/ 16/16/ 2-12/2-12/ 17/17/ 2-12/2-12 17/17

14 x 4.3-10 Female EasyRET2.0 + 2 x Cluster

1509 x 499 x 206

**AOC4518R16v06

292

65/65/65/ 65/65/65/ 65/65*

15.5/15.5/ 0-10/0-10/ 17.5/17/ 2-12/2-12/ 17/17/ 2-12/2-12/ 17/17 2-12/2-12

14 x 4.3-10 Female EasyRET2.0 + 2 x Cluster

2099 x 449 x 196

AOC4518R8v06

293

Tilt Method

Connector

Dimension(mm)

Model

Page

Electrical Frequency 3dB Horizontal Gain (dBi) Downtilt (o) Range (MHz) Beam Width (o) 2300-2690

65*

17.5

2-12

EasyRET2.0

9x N Female

1445 x 299 x 109

ATD4516R5

300

3300-3800

65*

17

2-12

EasyRET2.0

9x N Female

1100 x 259 x 135

ATD4516R8

304

2300-2690/ 3300-3800

65*/65*

17/16

2-12/2-12

EasyRET2.0

18 x N Female

1499 x 469 x 206

ATD4516R9

308

* Broadcast beam ** Preliminary Issue

TDD & Others

TDD Antenna

ASI4518R42v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-380065/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m Preliminary Issue Electrical Properties Frequency range (MHz)

2 x (690 - 960)

2 x (1427 - 2690 )

1695 - 2690

Electrical downtilt (°)

0 - 10

2 - 12

2 - 12

Gain (dBi)

15.5

17.3

17.3

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

15

16

16

Horizontal 3dB beam width (°)

68

68

68

7.5

6.5

Vertical 3dB beam width (°)

9

VSWR

< 1.5

Front to back ratio, copolar (dB)

Typ. 25

Typ. 25

Typ. 25

Cross polar ratio (dB)

Typ. 15

Typ. 16

Typ. 16

0°

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Electrical Properties 2300 - 3800

Frequency range (MHz)

2300 - 2690

Electrical downtilt (°)

2 - 12

Ports VSWR Single column beam

65° Broadcast beam

Service beam

Soft split beam

290

3300 - 3800

1.5 Horizontal 3dB beam width (°)

90

70

15.0

15.5

Horizontal 3dB beam width (°)

65

65

Vertical 3dB beam width (°)

7.0

5.5

Gain (dBi)

16.0

17

Horizontal 3dB beam width (°)

26

20

Gain (dBi)

20

21

Horizontal 3dB beam width (°)

30

/

19.0

/

Gain (dBi)

Gain (dBi)

ASI4518R42v06 DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-380065/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m 106

Mechanical Properties Antenna dimensions (H x W x D) (mm)

2099 x 449 x 196

Packing dimensions (H x W x D) (mm)

2360 x 525 x 240

Antenna net weight (kg)

39

Mechanical downtilt (°)

0 - 12

Integrated RET

RET protocols

AISG 2.0 / 3GPP

TDD & Others

RET type

2099

10 x 4.3-10 Female 1 x MQ4 Male + 1 x MQ5 Male 1400

Connector

291

AOC4518R16v06 D8X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/3300-3800-8x6514.5i/14.5i/16i/16i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-1.5m Preliminary Issue Electrical Properties Frequency range (MHz)

2 x (690 - 960)

2 x (1427-2200)

2 x (2490 - 2690)

1695 - 2690

Electrical downtilt (°)

2 - 14

2 - 12

2 - 12

2 - 12

Gain (dBi)

14.3

15.8

16.8

17.1

Side lobe suppression for first side lobe above main beam (Typ.) (dB)

15

15

16

16

Horizontal 3dB beam width (°)

68

67

64

65

14.0

7.8

5.5

6.5

Vertical 3dB beam width (°) VSWR

< 1.5

Front to back ratio, copolar (dB)

Typ. 25

Typ. 25

Typ. 25

Typ. 25

Cross polar ratio (dB)

Typ. 15

Typ. 16

Typ. 16

Typ. 16

0°

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc)

Electrical Properties Frequency range (MHz)

3300 - 3800

Electrical downtilt (°)

2 - 12

Ports VSWR Single column beam

65° Broadcast beam

1.5 Horizontal 3dB beam width (°)

85

Gain (dBi)

15

Horizontal 3dB beam width (°)

65

Vertical 3dB beam width (°)

5.5

Gain (dBi)

16.5

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1509 x 499 x 206

Packing dimensions (H x W x D) (mm)

1810 x 570 x 285

Antenna net weight (kg)

42

Mechanical downtilt (°)

0 - 16

Connector

14 x 4.3-10 Female + 1 x MQ4 Male + 1 x MQ5 Male

RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

292

AOC4518R8v06 D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/2300-3800-8x6515.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m Antenna Specifications Electrical Properties 2 x (690 - 960) (Lr1 / Rr2)

Frequency range (MHz)

690 - 803

790 - 862

Polarization Electrical downtilt (°) Gain (dBi)

824 - 894

880 - 960

+45° , -45° 0 - 10 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

14.8

15.1

15.3

15.6

14.7 ±0.5

15.0 ±0.5

15.2 ±0.5

15.5 ±0.5

> 16

> 16

> 16

> 16

65 ±5

62 ±5

60 ±5

60 ±5

10.9 ±0.7

9.8 ±0.6

9.4 ±0.5

8.9 ±0.5

> 22

> 23

> 23

> 18

> 18

> 18

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 21

Cross polar ratio (dB)

> 18

0°

Max. power per input (W)

400 (at 50℃ ambient temperature)* ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1427 - 2690 (Ry3)

Frequency range (MHz)

1427 - 1518

1695 - 1990

2200 - 2490

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

1920 - 2200

2 - 12 , continuously adjustable

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.0

17.2

17.4

17.5

17.6

15.9 ±0.5

17.1 ±0.5

17.3 ±0.5

17.4 ±0.5

17.5 ±0.5

> 16

> 16

> 16

> 16

> 16

70 ±6

68 ±5

67 ±5

65 ±5

58 ±5

8.7 ±0.5

7.1 ±0.5

6.3 ±0.5

5.6 ±0.5

5.1 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28

Interband isolation (dB)

≥ 28

Front to back ratio , ±30° (dB)

> 25

> 26

> 26

> 26

> 25

Cross polar ratio (dB)

> 18

> 18

> 18

> 18

> 18

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

TDD & Others

Polarization

0°

250 (at 50℃ ambient temperature)* ≤ -150 (2 x 43 dBm carrier) 50 DC Ground

293

AOC4518R8v06 D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/2300-3800-8x6515.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m

Electrical Properties 1695 - 2200 (Lb1)

Frequency range (MHz)

1695 - 1990

Polarization

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2490 - 2690 (Ly1) 1920 - 2200

2 - 12 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.7

16.8

17.0

16.6 ±0.5

16.7 ±0.5

16.9 ±0.5

> 16

> 16

> 17

67 ±5

66 ±5

58 ±5

7.5 ±0.5

6.8 ±0.5

5.3 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 25

Cross polar ratio (dB)

> 18

0°

Max. power per input (W)

> 26

> 25

> 18

> 18

250 (at 50℃ ambient temperature)* ≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

Electrical Properties 1695 - 2200 (Rb2)

Frequency range (MHz)

1695 - 1990

Polarization

2 - 12 , continuously adjustable, each band separately

at mid Tilt over all Tilts

Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

16.8

16.9

17.2

16.7 ±0.5

16.8 ±0.5

17.1 ±0.5

> 16

> 16

> 17

62 ±5

61 ±5

58 ±5

7.6 ±0.5

6.8 ±0.5

5.3 ±0.5

VSWR

< 1.5

Cross polar isolation (dB)

≥ 28 ≥ 28

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 27

Cross polar ratio (dB)

> 18

Max. power per input (W) Intermodulation IM3 (dBc) Impedance (Ω) Grounding

0°

> 27

> 26

> 18

> 18

250 (at 50℃ ambient temperature)* ≤ -150 (2 x 43 dBm carrier) 50 DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

294

2490 - 2690

+45° , -45°

Electrical downtilt (°) Gain (dBi)

2490 - 2690 (Cy2) 1920 - 2200

AOC4518R8v06 D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/2300-3800-8x6515.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m

General Electrical Properties 2300 - 3800 (p1)

Frequency range (MHz)

2300 - 2690

Polarization General parameters

Electrical downtilt (°)

2 - 12, continuously adjustable

Electrical downtilt tolerance (°)

±1

Avg. power capacity (W)*

40 50

Impedance (Ω) Grounding

DC Ground

Coupling factor between calibration port and each antenna port (dB) Calibration and electrical parameters

3300 - 3800 +45° , -45°

Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports (°)

-26 ±2

-26 ±2

0.7

0.9

5

7

Ports VSWR

1.5

1.5

Co-polarization isolation between ports (dB)

≥ 20

≥ 20

Cross-polarization isolation between ports (dB)

≥ 23

≥ 23

* Total power : 1000 W (at 50℃ ambient temperature)

TDD LTE Electrical Properties

Gain (dBi) Horizontal 3dB beam width (°) Single column beam

Front to back ratio (dB)

65° Broadcast beam

Service beam

Soft split multibeam

3300 - 3800

15.0

15.7

90

70

≥ 25

≥ 25

Cross polar ratio (0°) (dB)

16

15

Vertical 3dB beam width (°)

8.0

5.5

Side lobe suppression for first side lobe above main beam (dB)

≥ 15

≥ 15

Gain (dBi)

16.0

17.1

Horizontal 3dB beam width (°) Radiation parameters

2300 - 3800 (p1) 2300 - 2690

Front to back ratio (dB)

65

65

≥ 26

≥ 25

Cross polar ratio (0°) (dB)

17

16

Vertical 3dB beam width (°)

8.0

5.5

Side lobe suppression for first side lobe above main beam (dB)

≥ 15

≥ 15

0°direct beam gain (dBi)

20.0

21.1

0°direction beam horizontal 3dB beam width (°)

26

20

0°direction beam front to back ratio (dB)

30

30 19

0°direction beam cross polar ratio (dB)

19

Gain (dBi)

19

/

Horizontal 3dB beam width (°)

32

/

≥ 30

/

19

/

Front to back ratio (dB) Cross polar ratio (0°) (dB)

TDD & Others

Frequency range (MHz)

Notes： 65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on site requirements and auxiliary equipment conditions.

295

AOC4518R8v06 D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/2300-3800-8x6515.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m 5G NR Electrical Properties 2300 - 3800 (p1)

Frequency range (MHz)

Single column beam

Radiation parameters NR Broadcast beam (PBCH/PSCH/SSC H with HUAWEI gNodeB)

NR Service beam

2300 - 2690

3300 - 3800

Gain (dBi)

/

15.7

Horizontal 3dB beam width (°)

/

70 ≥ 25

Front to back ratio (dB)

/

Cross polar ratio (0°) (dB)

/

15

Vertical 3dB beam width (°)

/

5.5

Side lobe suppression for first side lobe above main beam (dB)

/

≥ 15

Gain (dBi)

/

20.8

Horizontal 3dB beam width (°)

/

65

Front to back ratio (dB)

/

25

Vertical 3dB beam width (°)

/

5.5

Side lobe suppression for first side lobe above main beam (dB)

/

≥ 15

0°direct beam gain (dBi)

/

21.1

0°direction beam horizontal 3dB beam width (°)

/

20

0°direction beam front to back ratio (dB)

/

30

0°direction beam cross polar ratio (0°) (dB)

/

19

Notes： The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the maximum gain of SSB sweeping beams. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

Mechanical Properties

106

Distance between TDD columns (mm)

59

Antenna dimensions (H x W x D) (mm)

2099 x 449 x 196

Packing dimensions (H x W x D) (mm)

2360 x 535 x 240

Antenna weight (kg)

43.0

Clamps weight (kg)

5.8 (2 units) 54.9 (Included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

GFRPP

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65 Frontal: 615 (at 150 km/h) Lateral: 375 (at 150 km/h) Maximum: 810 (at 150 km/h)

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250 14 x 4.3-10 Female 1 x MQ4 Male + 1 x MQ5 Male

Connector Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 12 °

3.1 kg

1 (Separate packing)

296

1405 2099

Antenna packing weight (kg)

AOC4518R8v06 D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/2300-3800-8x6515.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m Antenna Information Management Module (AIMM) Specifications RET Properties RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 1.5 (when the motor does not work, 12 V) < 6 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 40 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Connectors Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

Lightning protection (kA)

10 (8/20 μs)

RAE Properties RAE type

Integrated RAE

RAE protocols

AISG-ES-RAE V2.1.0

TDD LTE EasyBeam Properties Frequency range (MHz)

2300 - 2690

3300 - 3800

2 - 12

2 - 12

Electrical downtilt (°) Horizontal 3dB beam width (°)

30

Broadca st beam Electrical azimuth (°)

Electrical azimuth step(°)

65

90

30

65

90

-15..+15

0

-15..+15

0

1

/

1

/

TDD & Others

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWMxxx……Lr1 HWMxxx……Ly1 HWMxxx……Lb1

h

Lb1 Ly1 Rb2 Cy2

HWMxxx……Cy2

g

HWMxxx……Rb2 p1

HWMxxx……Ry3 r - Red y - Yellow b - Blue p - Purple L - Left array R - Right array C - Center array

Ry3

g HWMxxx……Rr2

Lr1

p1

p1

p1

Rr2

h HWMxxx……..p1

297

AOC4518R8v06 D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/2300-3800-8x6515.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m Pattern sample for reference

298

690 - 960 MHz (Lr1 / Rr2)

1427 - 2690 MHz (Ry3)

1695 - 2200 MHz (Lb1)

2490 - 2690 MHz (Ly1)

1695 - 2200 MHz (Rb2)

2490 - 2690 MHz (Cy2)

Single column (2300 - 3800 MHz)

65° Broadcast (2300 - 3800 MHz)

Service 0° (2300 - 3800 MHz)

5G NR Broadcast (3300 - 3800 MHz)

Multi-Beam-30° (2300 - 2690 MHz)

Multi-Beam+30° (2300 - 2690 MHz)

TDD & Others

AOC4518R8v06 D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/2300-3800-8x6515.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H FDD/2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs-2.0m

299

ATD4516R5 DX-2300-2690-90-16i-M-R Antenna Specifications General Electrical Properties Frequency range (MHz)

2300 - 2400

Polarization General Electrical downtilt (°) parameters Electrical downtilt tolerance (°)

2496 - 2690 +45° , -45°

2 - 12 , continuously adjustable ±1

Grounding

DC Ground

Coupling factor between calibration port and each antenna port (dB)

-26 ±2

Max. amplitude tolerance from calibration port to input ports (dB) Calibration Max. phase tolerance from calibration port to input ports (°) and Ports VSWR electrical parameters Co-polarization isolation between ports (dB)

Cross-polarization isolation between ports (dB)

0.7 5 1.5 ≥ 20 @ 2°Electrical downtilt ; ≥ 25 @ 3°- 6°Electrical downtilt; ≥ 28 @ 7°- 12°Electrical downtilt ≥ 25 @ 2°Electrical downtilt; ≥ 28 @ 3°- 6°Electrical downtilt; ≥ 30 @ 7°- 12°Electrical downtilt

Beamforming Electrical Properties Frequency range (MHz)

Single column beam

2300 - 2400

2496 - 2690

Horizontal 3dB beam width (°)

90

75

Gain (dBi)

16

17

Cross polar ratio (0°) (dB)

20

20

Side lobe suppression for first side lobe above main beam (dB)

≥ 18

≥ 18

Front to back ratio (dB)

≥ 28

≥ 27

65

65

17.5

18

12

12

6.5

5.7

Horizontal 3dB beam width (°) Gain (dBi) Gain roll-off at sector edge (dB) 65° Radiation Vertical 3dB beam width (°) Broadcast parameters beam Cross polar ratio (0°) (dB)

22

22

Front to back ratio (dB)

≥ 30

≥ 30

Side lobe suppression for first side lobe above main beam (dB)

≤ -18

≤ -18

21

22

0° direction beam horizontal 3dB beam width (°)

25.5

23

0° direction beam horizontal side lobe suppression (dB)

-12

-12

±30° direction beam gain (dBi)

20.5

21

0° direction beam cross polar ratio (0°) (dB)

22

22

0° direction beam front to back ratio (dB)

30

30

0° direct beam gain (dBi)

Service beam

300

ATD4516R5 DX-2300-2690-90-16i-M-R

Soft Split Electrical Properties Frequency range (MHz)

2300 - 2400

2496 - 2690

30

27

Horizontal 3dB beam width (°) Radiation parameters

Multi-beam

Gain (dBi)

20.5

21.5

Vertical 3dB beam width (°)

6.5

5.7

Front to back ratio (dB)

≥ 30

≥ 30

Side lobe suppression for first side lobe above main beam (dB)

≥ 18

≥ 18

Notes： 65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on site requirements and auxiliary equipment conditions. 106

Mechanical Properties Distance between columns (mm)

62

Antenna dimensions (H x W x D) (mm)

1445 x 299 x 109

Packing dimensions (H x W x D) (mm)

1770 x 350 x 180

Antenna weight (kg)

16.0

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

22.8 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1445

50 - 115 1331

Mast diameter supported (mm)

Frontal: 410 (at 150 km/h) Lateral: 140 (at 150 km/h) Maximum: 470 (at 150 km/h)

Max. operational wind speed (km/h) Survival wind speed (km/h)

200

TDD & Others

Wind load (N)

250

Connector

9 x N Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16 °

1.3 kg

1 (Separate packing)

RET S/N: HWMxxx….y RAE S/N: HWXxxx…..y y - Yellow

301

ATD4516R5 DX-2300-2690-90-16i-M-R Pattern sample for reference

Single column

65° Broadcast

Service 0°

Service 30°

Azimuth -15°

Azimuth +15°

Multi-Beam -30°

Multi-Beam +30°

302

ATD4516R5 DX-2300-2690-90-16i-M-R

Antenna Information Management Module (AIMM) Specifications RET Properties RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

Input voltage range (V)

DC 10 - 30

Power consumption (W)

< 1 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s) RET interface 1 (RF feeder)

Typ. 30 Calibration channel integrate the Bias-T and supporting OOK modulation signal communication

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET interface 2 (485 connector) Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

10 (8/20 μs)

Lightning protection (kA)

RAE Properties RAE type

Integrated RAE, manages antenna information

RAE protocols

AISG-ES-RAE V2.1.0

EasyBeam Properties Frequency range (MHz)

2300 - 2400

2496 - 2690

Electrical downtilt (°) Horizontal 3dB beam width (°)

Broadca st beam Electrical azimuth (°)

Electrical azimuth step(°)

2 - 12 30

65

90

30

65

90

-15..+15

0

-15..+15

0

1

/

1

/

TDD & Others

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

303

ATD4516R8 DX-3300-3800-75-15.5i-M-R Antenna Specifications General Electrical Properties General parameters

Frequency range (MHz)

3300 - 3800

Polarization

+45° , -45°

Electrical downtilt (°)

2 - 12，continuously adjustable

Grounding

DC Ground

Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Calibration and electrical parameters

Max. phase tolerance from calibration port to input ports (°)

-26 ±2 0.9 7

Ports VSWR

1.5

Avg. power capacity (W)

25

Co-polarization isolation between ports (dB)

≥ 20

Cross-polarization isolation between ports (dB)

≥ 25

Beamforming Electrical Properties Frequency range (MHz) Horizontal 3dB beam width (°)

Single column beam

Radiation parameters

65° Broadcast beam

Service beam

304

3300 - 3800 78

Gain (dBi)

15.5

Vertical 3dB beam width (°)

5.5

Cross polar ratio (0°) (dB)

≥ 18

Side lobe suppression for first side lobe above main beam (dB)

≤ -15

Front to back ratio (dB)

≥ 23

Horizontal 3dB beam width (°)

65

Gain (dBi)

17

Gain roll-off at sector edge (dB)

12

Vertical 3dB beam width (°)

5.5

Cross polar ratio (0°) (dB)

22

Front to back ratio (dB)

≥ 25

Side lobe suppression for first side lobe above main beam (dB)

≤ -15

0° direct beam gain (dBi)

21

0° direction beam horizontal 3dB beam width (°)

26

0° direction beam horizontal side lobe suppression (dB)

-12

0° direction beam cross polar ratio (0°) (dB)

22

0° direction beam front to back ratio (dB)

28

ATD4516R8 DX-3300-3800-75-15.5i-M-R

Soft Split Electrical Properties Frequency range (MHz)

Radiation parameters Multi-beam

3300 - 3800

Horizontal 3dB beam width (°)

30

Gain (dBi)

20

Vertical 3dB beam width (°)

5.5

Front to back ratio (dB)

≥ 25

Side lobe suppression for first side lobe above main beam (dB)

≤ -15

Notes： 65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on site requirements and auxiliary equipment conditions.

Mechanical Properties Distance between columns (mm)

43

Antenna dimensions (H x W x D) (mm)

1100 x 259 x 135

Packing dimensions (H x W x D) (mm)

1290 x 340 x 205

Antenna weight (kg)

13.0

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

106

20.0 (Included clamps) 50 - 115 Fiberglass

Radome colour

Light grey

Operational temperature (℃)

1100

Radome material

770

Mast diameter supported (mm)

-40 .. +65

Wind load (N) Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

TDD & Others

Frontal: 285 (at 150 km/h) Lateral: 130 (at 150 km/h) Maximum: 385 (at 150 km/h)

9 x N Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16°

1.3 kg

1 (Separate packing)

RET S/N:

HWMxxx….y

RAE S/N:

HWXxxx…..y

y - Yellow

305

ATD4516R8 DX-3300-3800-75-15.5i-M-R Pattern sample for reference

Single column

65° Broadcast

Service 0°

306

Azimuth -15°

Azimuth +15°

Multi-Beam -30°

Multi-Beam +30°

ATD4516R8 DX-3300-3800-75-15.5i-M-R Antenna Information Management Module (AIMM) Specifications RET Properties RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

Input voltage range (V)

DC 10 - 30

Power consumption (W)

< 1 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s) RET interface 1 (RF feeder)

Typ. 30 Calibration channel integrate the Bias-T and supporting OOK modulation signal communication

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET interface 2 (485 connector) Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

Lightning protection (kA)

5 (8/20 μs)

RAE Properties RAE type

Integrated RAE, manages antenna information

RAE protocols

AISG-ES-RAE V2.1.0

EasyBeam Properties Frequency range (MHz)

3300 - 3800

Electrical downtilt (°) Horizontal 3dB beam width (°)

Broadca st beam Electrical azimuth (°)

Electrical azimuth step(°)

2 - 12 30

65

90

-15..+15

0

1

/

TDD & Others

Standards: EN 55032(Emission), EN 55024(Immunity), ETSI EN 301 489, FCC part15, ICES-003 Certification: CE, FCC, IC, RoHS, REACH,WEEE

307

ATD4516R9 DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R EasyRET Dual-Band TDD Antenna with Integrated RCUs - 1.4m Antenna Specifications General Electrical Properties General parameters

Frequency range (MHz)

2300 - 2690

3300 - 3800

Polarization

+45° , -45°

+45° , -45°

2 - 12, continuously adjustable

2 - 12, continuously adjustable

DC Ground

DC Ground

-26 ±2

-26 ±2

0.7

0.9

5

7

Ports VSWR

1.5

1.5

Avg. power capacity (W)

25

25

Co-polarization isolation between ports (dB)

≥ 20

≥ 20

Cross-polarization isolation between ports (dB)

≥ 23

≥ 23

Electrical downtilt (°) Grounding Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB)

Calibration and electrical parameters

Max. phase tolerance from calibration port to input ports (°)

Beamforming Electrical Properties Frequency range (MHz) Horizontal 3dB beam width (°)

Single column beam

Service beam

75

16

16.5

5.8

5.2

Cross polar ratio (0°) (dB)

≥ 19

≥ 17

Side lobe suppression for first side lobe above main beam (dB)

≥ 15

≥ 15

Front to back ratio (dB)

≥ 25

≥ 25

65

65

17.5

17.5

Gain roll-off at sector edge (dB)

12

12

Vertical 3dB beam width (°)

5.8

5.2

Cross polar ratio (0°) (dB)

17

19

Front to back ratio (dB)

≥ 28

≥ 25

Side lobe suppression for first side lobe above main beam (dB)

≥ 15

≥ 15

0° direct beam gain (dBi)

21.5

21

0° direction beam horizontal 3dB beam width (°)

23

24

0° direction beam horizontal side lobe suppression (dB)

12

12

0° direction beam cross polar ratio (0°) (dB)

22

19

≥ 30

≥ 30

0° direction beam front to back ratio (dB)

308

90

Gain (dBi)

Gain (dBi) 65° Broadcast beam

3300 - 3800

Vertical 3dB beam width (°)

Horizontal 3dB beam width (°)

Radiation parameters

2300 - 2690

ATD4516R9 DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R EasyRET Dual-Band TDD Antenna with Integrated RCUs - 1.4m Soft Split Electrical Properties Frequency range (MHz)

2300 - 2690

Horizontal 3dB beam width (°) Radiation parameters Multi-beam

28

Gain (dBi)

20.5

Vertical 3dB beam width (°)

5.8

Front to back ratio (dB)

≥ 30

Side lobe suppression for first side lobe above main beam (dB)

≥ 15

Notes： 65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on site requirements and auxiliary equipment conditions.

Mechanical Properties Distance between columns (mm)

43 / 62

Antenna dimensions (H x W x D) (mm)

1499 x 469 x 206

Packing dimensions (H x W x D) (mm)

1870 x 535 x 285

Antenna weight (kg)

31.5

Clamps weight (kg)

5.8 (2 units)

Antenna packing weight (kg)

106

49.0 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-40 .. +65

1499

50 - 115 1383

Mast diameter supported (mm)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

TDD & Others

Frontal: 440 (at 150 km/h) Lateral: 265 (at 150 km/h) Maximum: 585 (at 150 km/h)

Wind load (N)

18 x N Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0F01

Mechanical downtilt: 0 - 16°

3.1 kg

1 (Separate packing)

RET S/N:

RAE S/N:

HWMxxx….y1

HWXxxx…..y1

HWMxxx….y2

HWXxxx…..y2

y - Yellow

309

ATD4516R9 DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R EasyRET Dual-Band TDD Antenna with Integrated RCUs - 1.4m Pattern sample for reference

Single column (2300 - 2690)

Single column (3300 - 3800)

65° Broadcast (2300 - 2690)

65° Broadcast (3300 - 3800)

Service 0° (2300 - 2690)

Service 0° (3300 - 3800)

Multi-Beam-30° (2300 - 2690)

Multi-Beam+30° (2300 - 2690)

310

ATD4516R9 DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R EasyRET Dual-Band TDD Antenna with Integrated RCUs - 1.4m Antenna Information Management Module (AIMM) Specifications RET Properties RET type

Integrated RET

RET protocols

AISG 2.0 / 3GPP

Input voltage range (V)

DC 10 - 30

Power consumption (W)

< 1 (when the motor does not work, 12 V) < 3 (when the motor is working, 12 V) < 10 (when the motor is starting up or shutting down, 12 V)

Adjustment time (full range) (s)

Typ. 30 Calibration channel integrate the Bias-T and supporting OOK modulation signal communication

RET interface 1 (RF feeder)

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET interface 2 (485 connector) Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

Lightning protection (kA)

5 (8/20 μs)

RAE Properties RAE type

Integrated RAE

RAE protocols

AISG-ES-RAE V2.1.0

EasyBeam Properties Frequency range (MHz)

2300 - 2690

3300 - 3800

2 - 12

2 - 12

Electrical downtilt (°) Horizontal 3dB beam width (°) Broadcast beam

Electrical azimuth (°) Electrical azimuth step(°)

30

65

90

30

65

90

-15..+15

0

-15..+15

0

1

/

1

/

TDD & Others

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032(Emission), EN 55024(Immunity), ETSI EN 301 489, FCC Part 15, ICES-003 Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

311

B. Passive Antenna Small Antenna Small Antenna

Frequency 3dB Horizontal Electrical Gain (dBi) Range (MHz) Beam Width (o) Downtilt (o)

Tilt Method

Connector

Dimension(mm)

Model

Page

698-960/ 1710-2690

65/65

8.5/9

0

FET

4 x 4.3-10

299 x 265 x 85

ADU450900v06

314

698-960/ 1710-2690

65/65

12/12

0

FET

4 x 4.3-10

549 x 265 x 85

ADU451200v06

316

TDD & Others

** Preliminary Issue

ADU450900v06 DXX-698-960/1710-2690-65/65-8.5i/9i-0F

Electrical Properties 698 - 960

Frequency range (MHz)

698 - 806

Polarization Electrical downtilt (°) Gain (dBi)

1710 - 2690 806 - 960

1710 - 2200

2200 - 2490

+45° , -45°

+45° , -45°

0，fixed

0，fixed

2490 - 2690

8.0 ±0.5

8.0 ±0.5

8.5 ±0.5

8.5 ±0.5

9.0 ±0.3

Horizontal 3dB beam width (°)

73 ±4

70 ±5

65 ±7

69 ±7

61 ±6

Vertical 3dB beam width (°)

69 ±5

68 ±5

57 ±5

56 ±6

52 ±5

VSWR

< 1.9

Cross polar isolation (dB)

≥ 22 ≥ 23

Interband isolation (dB) Front to back ratio , ±30° (dB)

> 20

> 20

> 20

> 20

> 22

Cross polar ratio (dB)

> 18

> 18

> 15

> 16

> 16

0°

Max. power per input (W)

100 (at 50℃ ambient temperature)

50 (at 50℃ ambient temperature)

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

299 x 265 x 85

Packing dimensions (H x W x D) (mm)

755 x 345 x 230

Antenna weight (kg)

3.5

Bracket weight (kg)

1.2 (1 unit)

Bracket angular range (°)

Azimuth

±30

Mechanical downtilt

±15

Antenna packing weight (kg) Mast diameter supported (mm)

6.5 (Included bracket)

Cement or metal pole

Φ100 - 360

Wooden pole

Φ200 - 420

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-55.. +70

Wind load (N)

Frontal: 70 (at 150 km/h) Lateral: 20 (at 150 km/h) Maximum: 80 (at 150 km/h)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector Connector position

314

4 x 4.3-10 Female Bottom

ADU450900v06 DXX-698-960/1710-2690-65/65-8.5i/9i-0F

60

76

299

150

166

Unit: mm 698 - 960 X +45°

1710 - 2690 X

-45°

4.3-10 (F) 4.3-10 (F)

+45°

-45°

4.3-10 (F) 4.3-10 (F)

TDD & Others

Pattern sample for reference

698- 960 MHz

1710- 2690 MHz

315

ADU451200v06 DXX-698-960/1710-2690-65/65-12i/12i-0F

Electrical Properties 698 - 960

Frequency range (MHz)

1710 - 2690

698 - 806

Polarization Electrical downtilt (°) Gain (dBi)

806 - 960

1710 - 2200

2300 - 2690

+45° , -45°

+45° , -45°

0，fixed

0，fixed

10.5 ±0.5

11 ±0.5

11 ±0.5

11.5 ±0.5

Horizontal 3dB beam width (°)

73 ±4

68 ±4

68 ±5

61 ±6

Vertical 3dB beam width (°)

40 ±4

35 ±4

30 ±4

24 ±4

VSWR

< 1.8

Cross polar isolation (dB)

≥ 22

Interband isolation (dB)

≥ 23

Front to back ratio , ±30° (dB)

> 22

> 24

> 24

> 23

Cross polar ratio (dB)

> 18

> 18

> 16

> 16

0°

Max. power per input (W)

100 (at 50℃ ambient temperature)

60 (at 50℃ ambient temperature)

≤ -150 (2 x 43 dBm carrier)

Intermodulation IM3 (dBc) Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

549 x 265 x 85

Packing dimensions (H x W x D) (mm)

755 x 345 x 230

Antenna weight (kg)

4.7

Bracket weight (kg)

1.2 (1 unit)

Bracket angular range (°)

Azimuth

±30

Mechanical downtilt

±15

Antenna packing weight (kg) Mast diameter supported (mm)

7.7 (Included bracket)

Cement or metal pole

Φ100 - 360

Wooden pole

Φ200 - 420

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-55.. +70

Wind load (N)

Frontal: 130 (at 150 km/h) Lateral: 35 (at 150 km/h) Maximum: 150 (at 150 km/h)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector Connector position

316

4 x 4.3-10 Female Bottom

ADU451200v06 DXX-698-960/1710-2690-65/65-12i/12i-0F

60

698 - 960 X +45°

-45°

4.3-10 (F) 4.3-10 (F)

549

166

275

76

1710 - 2690 X +45°

Unit: mm

-45°

4.3-10 (F) 4.3-10 (F)

TDD & Others

Pattern sample for reference

698- 960 MHz

1710- 2690 MHz

317

C. Digital Antenna System C-1. RET System C - 1 - 1. Remote Control Unit (RCU) Antenna and RCU configuration list Antenna and AIMM configuration list Input voltage range (V) DC 10 - 30

AISG type

Adjustment time (full range) (min)

Calibration time (min)

Dimension (mm)

Model

Page

AISG 2.0

Typ. 1,000,000

EMC

ETS 300 342-3

Lightning protection (kA)

10 (8/20 us)

Mechanical Specification 247 x 342 x 132 (without connectors, without brackets)

MTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

300 x 545 x 250 ≤ 10.5 (with brackets)

MTMA weight (kg)

≤ 12.3

Packing weight (kg) MTMA Volume (L)

Approx. 10.8 8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected)

AISG connector

Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting

Mounting Mast diameter (mm) Connector *Insertion loss: IL* =

40 - 135 6 x 4.3-10 Female ( Two ports are eNodeB and four ports are ANT)

Sum(v1+ v2 + .... + vn) , V1, V2 through Vn-1 are the IL-values at points for spacing of every 5 MHz in the passband from low to n

high frequencies. Vn is the IL-value for the highest frequency.

If n is less than 4, calculate using the following formula: IL = ILMin.MHz(TX) + 2 × ILMid.MHz(TX) + ILMax.MHz(TX) 4

**Noise figure: NF =

Sum(NF1 + NF2 + .... + NFn) , NF1,NF2 through NFn-1 are the NF-values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. NFn is the NF-value for the highest frequency. If n is less than 4, calculate using the following formula: NF =

372

NFMin.MHz(RX) + 2 × NFMid.MHz(RX) + NFMax.MHz(RX) 4

MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG Model: ATADU2005v06 (AISG 2.0)

TMA

M8

Unit : mm

373

MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG Model: ATADU2015v06

Product Description The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the MTMA can be operated from one primary controller, either on BTS0 or BTS1 port. When scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency band).

Features 

High linearity and low noise performance.



Power failure bypass for high reliability.



Light weight and compact design.



Designed for co-location purposes.



Wall mounting and mast mounting.



Built-in lightning protection up to 10 kA.



Support AISG 2.0 protocol.

Appearance and Block Diagram

374

MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG Model: ATADU2015v06 Tx Specifications Frequency range (MHz)

1805 - 1880&2110 - 2170

Bandwidth (MHz) Insertion loss * (dB)

2620 - 2690

75&60

70

Typ. < 0.4&Typ. < 0.25

Typ. < 0.35 ≥ 18

Return loss (dB)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak

Input power (W)

Intermodulation products in Rx band (dBc)

≤ -160 (3rd order; with 2 x 43 dBm) @1800M ≤ -165 (7th order; with 2 x 43 dBm) @2100M

≤ -160 (3rd order; with 2 x 43 dBm) @2600M

Rx Specifications Frequency range (MHz)

1710 - 1785&1920 - 1980

Bandwidth (MHz)

2500 - 2570

75&60

70 ≥ 18 (DC ON) ≥ 13 (DC OFF)

Return loss (dB) Insertion loss in by-pass mode (dB)

Typ. < 2.5

Gain (dB)

12 ±1

Noise figure** (dB)

Typ. < 1.4 &Typ. < 1.4

Typ. < 1.5 ≥ 12

Output 1dB compression (dBm)

≥ 27

OIP3 (dBm)

Electrical Specifications DC supply voltage (V) Operating current per TMA (mA) (without RET)

8.5 - 30 @12 V

Max. 250

@17 V

Max. 176

@30 V

Max. 100

Alarm management

AISG2.0

Power consumption (W)

< 3.0

Environmental Specification Operating temperature range (℃)

-40 ... +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3

Lightning protection (kA)

10 (8/20 us)

Mechanical Specification 252 x 236 x 95 (without connectors, without brackets)

MTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

405 x 305 x 210

MTMA weight (kg)

8.0

Packing weight (kg)

9.5 < 5.8 8-pin female, IEC 60130-9 (pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected)

AISG connector

Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting

Mounting Mast diameter (mm) Connector *Insertion loss: IL* =

40 - 135 6 x 4.3-10 Female ( Two ports are BTS and four ports are ANT)

Sum(v1+ v2 + .... + vn) , V1, V2 through Vn-1 are the IL-values at points for spacing of every 5 MHz in the passband from low to n

high frequencies. Vn is the IL-value for the highest frequency.

If n is less than 4, calculate using the following formula: IL = ILMin.MHz(TX) + 2 × ILMid.MHz(TX) + ILMax.MHz(TX) 4

**Noise figure: NF =

Sum(NF1 + NF2 + .... + NFn) , NF1,NF2 through NFn-1 are the NF-values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. NFn is the NF-value for the highest frequency. If n is less than 4, calculate using the following formula: NF =

NFMin.MHz(RX) + 2 × NFMid.MHz(RX) + NFMax.MHz(RX) 4

375

TMA

MTMA Volume (L)

MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG Model: ATADU2015v06

M8

Unit : mm

376

MTMA-1800&2100&2600-12dB-2BTSport4ANTport-AISG Model: ATATR2002v06

Product Description The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It effectively reduces the transmitting power used by cellphones and improves voice and data communication quality. When scanning the AISG ALD, the MTMA can be operated from one primary controller, either on BTS0 or BTS1 port. When scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per frequency band).

Features 

High linearity and low noise performance.



Power failure bypass for high reliability.



Light weight and compact design.



Designed for co-location purposes.



Wall mounting and mast mounting.



Built-in lightning protection up to 10 kA.



Support AISG 2.0 protocol.

Appearance and Block Diagram

ANT0 1800&2100&2600

ANT1 1800&2100&2600 Bias Tee &Lightning Protection

RX2600

RX2100

RX1800

TX2600

RX1800

RX2100

Bias Tee & Lightning protection BTS 0

TX2600

Control Circuit & Modem

LNA

RX1800

RS485

RX2600

TX2100

RX2600

TX1800

TX1800

LNA

RX2100

DC &OOK

RX1800

DC &OOK

RET_0

TX2100

LNA

RX2100

TMA

Bias Tee & Lightning Protection

LNA

RX2600

Bias Tee & Lightning protection BTS 1

377

MTMA-1800&2100&2600-12dB-2BTSport4ANTport-AISG Model: ATATR2002v06

Tx Specifications Frequency range (MHz)

1805 - 1880

2110 - 2170

75

60

70

Typ. < 0.4

Typ. < 0.25

Typ. < 0.35

Bandwidth (MHz) Insertion loss * (dB)

2620 - 2690

≥ 18

Return loss (dB)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak

Input power (W) Intermodulation products in Rx band (dBc)

≤ -160 (3rd order; with 2 x 43 dBm) @1800M

≤ -165 (7th order; with 2 x 43 dBm) @2100M

≤ -160 (3rd order; with 2 x 43 dBm) @2600M

Rx Specifications Frequency range (MHz)

1710 - 1785

1920 - 1980

2500 - 2570

75

60

70

Bandwidth (MHz)

≥ 18 (DC ON) ≥ 13 (DC OFF)

Return loss (dB) Insertion loss in by-pass mode (dB)

Typ. < 2.0

Typ. < 2.0

Gain (dB)

Typ. < 2.0

12（ nominal）

Noise figure ** (dB)

Typ. 50

VSWR

< 1.28

Input power (W)

Port 1, Port 2

< 200

Intermodulation products (dBc)

< -160 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit： 101 x 194 x 128 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

380 x160 x 240 Double Unit: ≤ 5.5

Combiner weight (kg)

≤ 6.5

Packing weight (kg) Mounting

Wall mounting // Pole mounting

Mast diameter (mm)

40 - 135

Connector

*Insertion loss: IL* =

4.3-10 Female

Sum(v1 + v2 + .... + vn) n

, V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband

If n is less than 4, calculate using the following formula: IL =

Combiner

from low to high frequencies. Vn is the insertion loss value for the highest frequency. IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

387

DC-690-862/880-960-11 Model: ACOMD2A07v06 DC-690-862/880-960-10 Model: ACOMD2L11v06 DC-690-862/880-960-01 Model: ACOMD2H25v06

■ If the sign as shown above, it indicates this pass band is DC stop.

388

If the sign as shown above, it indicates this pass band is DC pass.

DC-690-803/824-960-10 Model: ACOMD2L08v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Combiner

Block Diagram

389

DC-690-803/824-960-10 Model: ACOMD2L08v06

Electrical Properties Model

ACOMD2L08v06 Band 1

690 - 803

Band 2

824 - 960

Port 1 ←→ Port 3

< 0.45 (690 MHz - 803 MHz)

Port 2 ←→ Port 3

< 0.45 (824 MHz - 960 MHz)

Port 1 ←→ Port 3

By-pass (max. 2500 mA)

Port 2 ←→ Port 3

Stop

Pass band (MHz)

Insertion loss *(dB)

DC/AISG transparency Isolation (dB)

> 49.0

VSWR

< 1.22

Input power (W)

Port 1, Port 2

< 300

Intermodulation products (dBc)

< -155 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 200 x 230 x 107 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

335 x 405 x 265

Combiner weight (kg)

Double Unit: ≤ 7.9

Packing weight (kg)

≤ 9.4

Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

390

DC-690-803/824-960-10 Model: ACOMD2L08v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

Unit : mm

Combiner

If the sign as shown above, it indicates this pass band is DC stop.

391

DC-698-960/1710-2200-01 Model: ACOMD2H11v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

ACOMD2H11v06

392

DC-698-960/1710-2200-01 Model: ACOMD2H11v06

Electrical Properties Model

ACOMD2H11v06 Band 1

698 - 960

Band 2

1710 - 2200

Port 1 ←→ Port 3

< 0.15 (698 MHz - 960 MHz)

Port 2 ←→ Port 3

< 0.15 (1710 MHz - 2200 MHz)

Port 1 ←→ Port 3

Stop

Port 2 ←→ Port 3

By-pass (max. 2500 mA)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency Isolation (dB)

> 40

VSWR

< 1.28

Input power (W)

Port 1, Port 2

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

175 x 355 x 220 Double Unit: ≤ 5.6

Combiner weight (kg)

≤ 6.2

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

Combiner

If n is less than 4, calculate using the following formula: IL =

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

393

DC-698-960/1710-2200-01 Model: ACOMD2H11v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Unit : mm

394

DC-698-960/1710-2200-11 Model: ACOMD2H19v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Combiner

Block Diagram

ACOMD2H19v06

395

DC-698-960/1710-2200-11 Model: ACOMD2H19v06

Electrical Properties Model

ACOMD2H19v06 Band 1

698 - 960

Band 2

1710 - 2200

Port 1 ←→ Port 3

< 0.15 (698 MHz - 960 MHz)

Port 2 ←→ Port 3

< 0.15 (1710 MHz - 2200 MHz)

Port 1 ←→ Port 3

By-pass (max. 2500 mA)

Port 2 ←→ Port 3

By-pass (max. 2500 mA)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency Isolation (dB)

> 40

VSWR

< 1.28

Input power (W)

Port 1, Port 2

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

175 x 355 x 220 Double Unit: ≤ 5.6

Combiner weight (kg)

≤ 6.2

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

396

DC-698-960/1710-2200-11 Model: ACOMD2H19v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Combiner

Unit : mm

397

DC-698-960/1710-2700-01 Model: ACOMD2H00v06 DC-698-960/1710-2700-11 Model: ACOMD2H22v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

ACOMD2H00v06

398

ACOMD2H22v06

DC-698-960/1710-2700-01 Model: ACOMD2H00v06 DC-698-960/1710-2700-11 Model: ACOMD2H22v06

Electrical Properties Model

ACOMD2H00v06

ACOMD2H22v06

Band 1

698 - 960

Band 2

1710 - 2700

Port 1 ←→ Port 3

< 0.15 (698 MHz - 960 MHz)

Port 2 ←→ Port 3

< 0.15 (1710 MHz - 2700 MHz)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

Port 1 ←→ Port 3

Stop

By-pass (max. 2500 mA)

Port 2 ←→ Port 3

By-pass (max. 2500 mA)

By-pass (max. 2500 mA)

Isolation (dB)

> 40

VSWR

< 1.28

Input power (W)

Port 1, Port 2

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

175 x 355 x 220 Double Unit: ≤ 4.2

Combiner weight (kg)

≤ 4.7

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

Combiner

If n is less than 4, calculate using the following formula: IL =

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

399

DC-698-960/1710-2700-01 Model: ACOMD2H00v06 DC-698-960/1710-2700-11 Model: ACOMD2H22v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Unit : mm

400

DC-1427-1880/1920-2200-DS Model: ACOMD2S02v06

Product Description



Built-in lightning protection up to 10 kA;



Can be used as a combiner near the BTS or in a reciprocal function near the antenna;



Automatically recognizes the port DC / AISG, and the combiner module or the demultiplexing module is the same module;



Support for customer-defined configuration with handheld terminal;



Designed for co-location purposes;



Feeder sharing available;



Suitable for indoor or outdoor applications.

Block Diagram

Port1

Combiner

DC/AISG Smart Bypass

Port3

Port2

1427-1880

1920-2200 ACOMD2S02v06

401

DC-1427-1880/1920-2200-DS Model: ACOMD2S02v06

Electrical Properties Model

ACOMD2S02v06 Band 1

1427 - 1880

Band 2

1920 - 2200

Port 1 ←→ Port 3

< 0.15

Port 2 ←→ Port 3

< 0.15

Port 1 ←→ Port 3

Smart-bypass (max. 2000 mA)

Port 2 ←→ Port 3

Smart-bypass (max. 2000 mA)

Port 1 ←→ Port 2

> 50

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency Isolation (dB) VSWR Input power (W)

< 1.28 Port 1, Port 2

< 200

Intermodulation products (dBc)

< -160 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

EMC

EN 55032:2015, EN 55035:2017

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Double Unit: 131 x 120 x 109 (without connectors, without mounting brackets)

Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

185 x 280 x 195 Double Unit: ≤ 3.6

Combiner weight (kg)

≤ 4.8

Packing weight (kg) Mounting

Wall mounting // Pole mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Function Specification Mode choice

Combine and split mode automatically selected

Smart DC/AISG bypass

DC/AISG input channel automatically selected

Load detection Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = n

Output load automatically detected , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

402

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

DC-1427-1880/1920-2200-DS

Combiner

Model: ACOMD2S02v06

403

DC-1427-1880/1920-2200-11 Model: ACOMD2A06v06 DC-1427-1880/1920-2200-10 Model: ACOMD2L12v06 DC-1427-1880/1920-2200-01 Model: ACOMD2H26v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

Port1 1427 - 1880

DC/AISG By-pass

DC/AISG By-pass

Port3

Port2

1920 - 2200

ACOMD2A06v06

404

ACOMD2L12v06

ACOMD2H26v06

DC-1427-1880/1920-2200-11 Model: ACOMD2A06v06 DC-1427-1880/1920-2200-10 Model: ACOMD2L12v06 DC-1427-1880/1920-2200-01 Model: ACOMD2H26v06

Electrical Properties Model

ACOMD2A06v06 Band 1

1427 - 1880

Band 2

1920 - 2200

Port 1 ←→ Port 3

< 0.15 (1427 MHz - 1880 MHz)

Port 2 ←→ Port 3

< 0.15 (1920 MHz - 2200 MHz)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

ACOMD2L12v06

ACOMD2H26v06

Port 1 ←→ Port 3

By- pass (max. 2500 mA)

By- pass (max. 2500 mA)

stop

Port 2 ←→ Port 3

By- pass (max. 2500 mA)

stop

By- pass (max. 2500 mA)

Isolation (dB)

> 50

VSWR Input power (W)

< 1.28 Port 1, Port 2

< 200

Intermodulation products (dBc)

< -160 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit： 131 x 120 x 94 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

280 x185 x 195 Double Unit: ≤ 3.5

Combiner weight (kg)

≤ 4.5

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

If n is less than 4, calculate using the following formula: IL =

Combiner

from low to high frequencies. Vn is the insertion loss value for the highest frequency. IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

405

DC-1427-1880/1920-2200-11 Model: ACOMD2A06v06 DC-1427-1880/1920-2200-10 Model: ACOMD2L12v06 DC-1427-1880/1920-2200-01 Model: ACOMD2H26v06

M8

■ If the sign as shown above, it indicates this pass band is DC stop.

406

If the sign as shown above, it indicates this pass band is DC pass.

DC-1710-1755&2110-2155/1850-1995-11 Model: ACOMD2A00v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Combiner

Block Diagram

ACOMD2A00v06

407

DC-1710-1755&2110-2155/1850-1995-11 Model: ACOMD2A00v06

Electrical Properties Model

ACOMD2A00v06 Band 1 (AWS)

1710 - 1755 & 2110 - 2155

Band 2 (PCS)

1850 -1995

Port 1 ←→ Port 3

< 0.3 (1710 MHz - 1755 MHz & 2110 MHz - 2155 MHz)

Port 2 ←→ Port 3

< 0.3 (1850 MHz - 1995 MHz)

Port 1 ←→ Port 3

By - pass (max. 2500 mA)

Port 2 ←→ Port 3

By - pass (max. 2500 mA)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency Isolation (dB)

> 35

VSWR

< 1.25

Input power (W)

Port 1, Port 2

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 185 x 180 x 103 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

260 x 380 x 215 Double Unit: ≤ 6.8

Combiner weight (kg)

≤ 7.7

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

408

DC-1710-1755&2110-2155/1850-1995-11 Model: ACOMD2A00v06

M6

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Combiner

Unit : mm

409

DC-1427-2200/2300-2690-11 Model: ACOMD2A08v06 DC-1427-2200/2300-2690-10 Model: ACOMD2L13v06 DC-1427-2200/2300-2690-01 Model: ACOMD2H27v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

ACOMD2A08v06

410

ACOMD2L13v06

ACOMD2H27v06

DC-1427-2200/2300-2690-11 Model: ACOMD2A08v06 DC-1427-2200/2300-2690-10 Model: ACOMD2L13v06 DC-1427-2200/2300-2690-01 Model: ACOMD2H27v06

Electrical Properties Model

ACOMD2A08v06 Band 1

1427 - 2200

Band 2

2300 - 2690

Port 1 ←→ Port 3

< 0.15 (1427 MHz - 1880 MHz)

Port 2 ←→ Port 3

< 0.15 (1920 MHz - 2200 MHz)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

ACOMD2L13v06

ACOMD2H27v06

Port 1 ←→ Port 3

By- pass (max. 2500 mA)

By- pass (max. 2500 mA)

stop

Port 2 ←→ Port 3

By- pass (max. 2500 mA)

stop

By- pass (max. 2500 mA)

Isolation (dB)

> 50

VSWR

< 1.28

Input power (W)

Port 1, Port 2

Intermodulation products (dBc)

< 200 < -160 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

Double Unit： 122 x 125 x 98 (without connectors, without mounting brackets) 280 x185 x 195 Double Unit: ≤ 3.5

Combiner weight (kg)

≤ 4.5

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

*Insertion loss: IL* = Sum(v1+ v2 + .... + vn) ,V1,V2…Vn-1 is the IL-value for each 5M in the passband from low frequency, Vn is the IL-value for high frequency. If n ＜ 4， IL =

IL + IL + 2 × IL Mid. Frequency Max. Frequency Min. Frequency 4

Combiner

n

**Lightning protection: In normal instance, the combiner share the GND protection systems with feeders and no need another GND cable.

411

DC-1427-2200/2300-2690-11 Model: ACOMD2A08v06 DC-1427-2200/2300-2690-10 Model: ACOMD2L13v06 DC-1427-2200/2300-2690-01 Model: ACOMD2H27v06

■ If the sign as shown above, it indicates this pass band is DC stop.

412

If the sign as shown above, it indicates this pass band is DC pass.

DC-1427-2200/2300-2690-DS Model: ACOMD2S03v06

Product Description 

Built-in lightning protection up to 10 kA;



Can be used as a combiner near the BTS or in a reciprocal function near the antenna;



Automatically recognizes the port DC / AISG, and the combiner module or the demultiplexing module is the same module;



Support for customer-defined configuration with handheld terminal;



Designed for co-location purposes;



Feeder sharing available;



Suitable for indoor or outdoor applications.

Combiner

Block Diagram

1427-2200

2300-2690 413

DC-1427-2200/2300-2690-DS Model: ACOMD2S03v06

EMClectrical Properties Model

ACOMD2S03v06 Band 1

1427 - 2200

Band 2

2300 - 2690

Port 1 ←→ Port 3

< 0.15 (1427 - 2200)

Port 2 ←→ Port 3

< 0.15 (2300 - 2690)

Port 1 ←→ Port 3

Smart-bypass (max. 2000 mA)

Port 2 ←→ Port 3

Smart-bypass (max. 2000 mA)

Port 1 ←→ Port 2

> 50

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency Isolation (dB) VSWR

< 1.28

Input power (W)

Port 1, Port 2

< 200

Intermodulation products (dBc)

< -160 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

EMC

EN 55032:2015, EN 55035:2017

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Double Unit: 122 x 125 x 111 (without connectors, without mounting brackets)

Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

185 x 280 x 195 Double Unit: ≤ 3.5

Combiner weight (kg)

≤ 4.8

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Function Specification Mode choice

Combine and split mode automatically selected

Smart DC/AISG bypass

DC/AISG input channel automatically selected

Load detection *Insertion loss: IL* =

Output load automatically detected Sum(v1 + v2 + .... + vn) n

, V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

414

DC-1427-2200/2300-2690-DS

Combiner

Model: ACOMD2S03v06

415

TC-790-862/880-960/1710-2200-111 Model: ACOMT2H04v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

ACOMT2H04v06

416

TC-790-862/880-960/1710-2200-111 Model: ACOMT2H04v06

Electrical Properties Model

ACOMT2H04v06 Band 1

790 - 862

Band 2

880 - 960

Band 3

1710 - 2200

Port 1 ←→ Port 4

< 0.3 (790 MHz - 862 MHz)

Port 2 ←→ Port 4

< 0.3 (880 MHz - 960 MHz)

Port 3 ←→ Port 4

< 0.25 (1710 MHz - 2200 MHz)

Port 1 ←→ Port 4

By-pass (max. 2500 mA)

Port 2 ←→ Port 4

By-pass (max. 2500 mA)

Port 3 ←→ Port 4

By-pass (max. 2500 mA)

Port 1 ←→ Port 2

> 50

Port 2 ←→ Port 3

> 50

Port 1 ←→ Port 3

> 50

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

Isolation (dB)

VSWR

< 1.24

Input power (W)

Port 1, Port 2, Port3

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Double Unit: 220 x 210 x 115 (without connectors, without mounting brackets)

Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

275 x 375 x 205 Double Unit: ≤ 7.5

Combiner weight (kg)

≤ 8.9

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

Sum(v1 + v2 + .... + vn) n

, V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband

Combiner

*Insertion loss: IL* =

4.3-10 Female

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

417

TC-790-862/880-960/1710-2200-111 Model: ACOMT2H04v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Unit : mm

418

TC-790-862/880-960/1710-2700-111 Model: ACOMT2A02v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

DC/AISG By-pass

Port2

880 - 960

Combiner

Port1

790 - 862

DC/AISG By-pass

DC/AISG By-pass

Port4

Port3

1710 - 2700

419

TC-790-862/880-960/1710-2700-111 Model: ACOMT2A02v06

Electrical Properties Model

ACOMT2A02v06 Band 1

790 - 862

Band 2

880 - 960

Band 3

1710 - 2700

Port 1 ←→ Port 4

< 0.3 (790 MHz - 862 MHz)

Port 2 ←→ Port 4

< 0.3 (880 MHz - 960 MHz)

Port 3 ←→ Port 4

< 0.15 (1710 MHz - 2700 MHz)

Port 1 ←→ Port 4

By-pass (max. 2500 mA)

Port 2 ←→ Port 4

By-pass (max. 2500 mA)

Port 3 ←→ Port 4

By-pass (max. 2500 mA)

Port 1 ←→ Port 2

> 47

Port 2 ←→ Port 3

> 50

Port 1 ←→ Port 3

> 50

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

Isolation (dB)

VSWR

< 1.28

Input power (W)

Port 1, Port 2, Port3

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Double Unit: 220 x 210 x 115 (without connectors, without mounting brackets)

Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

335 x 405 x 265 Double Unit: ≤ 7.5

Combiner weight (kg)

≤ 8.4

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

*Insertion loss: IL* =

4.3-10 Female

Sum(v1 + v2 + .... + vn) n

, V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

420

TC-790-862/880-960/1710-2700-111 Model: ACOMT2A02v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Combiner

Unit : mm

421

TC-790-960/1710-1880/1920-2200-001 Model: ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-011 Model: ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-111 Model: ACOMT2H08v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

ACOMT2H01v06

422

ACOMT2H03v06

ACOMT2H08v06

TC-790-960/1710-1880/1920-2200-001 Model: ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-011 Model: ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-111 Model: ACOMT2H08v06

Electrical Properties Model

ACOMT2H01v06 Band 1

790 - 960

Band 2

1710 - 1880

Band 3

1920 - 2200

Port 1 ←→ Port 4

< 0.15 (790 MHz - 960 MHz)

Port 2 ←→ Port 4

< 0.25 (1710 MHz - 1880 MHz)

Port 3 ←→ Port 4

< 0.25 (1920 MHz - 2200 MHz)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

ACOMT2H03v06

ACOMT2H08v06

Port 1 ←→ Port 4

Stop

Stop

By-pass (max. 2500 mA)

Port 2 ←→ Port 4

Stop

By-pass (max. 2500 mA)

By-pass (max. 2500 mA)

Port 3 ←→ Port 4

By-pass (max. 2500 mA)

By-pass (max. 2500 mA)

By-pass (max. 2500 mA)

Isolation (dB)

> 45

VSWR

< 1.28 Port 1, Port 2, Port3

Input power (W)

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

245 x 330 x 220 Double Unit: ≤ 5.6

Combiner weight (kg)

≤ 6.2

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

Combiner

If n is less than 4, calculate using the following formula: IL =

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

423

TC-790-960/1710-1880/1920-2200-001 Model: ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-011 Model: ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-111 Model: ACOMT2H08v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Unit : mm

424

TC-690-960/1710-1880/1920-2200-111 Model: ACOMT2A03v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

DC/AISG By-pass

Port2

1710 - 1880

Port3

1920 - 2200

Combiner

Port1

690 - 960

DC/AISG By-pass

DC/AISG By-pass

Port4

ACOMT2A03v06

425

TC-690-960/1710-1880/1920-2200-111 Model: ACOMT2A03v06

Electrical Properties Model

ACOMT2A03v06 Band 1

690 - 960

Band 2

1710 - 1880

Band 3

1920 - 2200

Port 1 ←→ Port 4

< 0.15 (690 MHz - 960 MHz)

Port 2 ←→ Port 4

< 0.25 (1710 MHz - 1880 MHz)

Port 3 ←→ Port 4

< 0.25 (1920 MHz - 2200 MHz)

Port 1 ←→ Port 4

By-pass (max. 2500 mA)

Port 2 ←→ Port 4

By-pass (max. 2500 mA)

Port 3 ←→ Port 4

By-pass (max. 2500 mA)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency Isolation (dB)

> 45

VSWR

< 1.28 Port 1, Port 2, Port3

Input power (W)

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

245 x 330 x 220 Double Unit: ≤ 7.0

Combiner weight (kg)

≤ 7.9

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

426

TC-690-960/1710-1880/1920-2200-111 Model: ACOMT2A03v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Combiner

Unit : mm

427

TC-690-960/1710-2200/2300-2690-111 Model: ACOMT2A04v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal function near the antenna.



Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

Port1

690 - 960

DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

Port4

Port2

1710 - 2200 ACOMT2A04v06

428

Port3

2300 - 2690

TC-690-960/1710-2200/2300-2690-111 Model: ACOMT2A04v06

Electrical Properties Model

ACOMT2A04v06 Band 1

690 - 960

Band 2

1710 - 2200

Band 3

2300 - 2690

Port 1 ←→ Port 4

< 0.15 (690 MHz - 960 MHz)

Port 2 ←→ Port 4

< 0.2 (1710 MHz - 2200 MHz)

Port 3 ←→ Port 4

< 0.2 (2300 MHz - 2690 MHz)

Port 1 ←→ Port 4

By-pass (max. 2500 mA)

Port 2 ←→ Port 4

By-pass (max. 2500 mA)

Port 3 ←→ Port 4

By-pass (max. 2500 mA)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency Isolation (dB)

> 45

VSWR

< 1.28

Input power (W)

Port 1, Port 2, Port3

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit: 196 x 190 x 112 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

335 x 405 x 265

Combiner weight (kg)

Double Unit: ≤ 7.0

Packing weight (kg)

≤ 7.9

Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector *Insertion loss: IL* =

4.3-10 Female Sum(v1 + v2 + .... + vn) n

, V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

Combiner

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

429

TC-690-960/1710-2200/2300-2690-111 Model: ACOMT2A04v06

M8

If the sign as shown above, it indicates this pass band is DC by-pass.

If the sign as shown above, it indicates this pass band is DC stop.

Unit : mm

430

TC-1710-1880/1920-2200/2300-2690-010

Model: ACOMT2M02v06

TC-1710-1880/1920-2200/2300-2690-111

Model: ACOMT2A07v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal

function near the antenna. 

Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

ACOMT2M02v06

Combiner

Block Diagram

ACOMT2A07v06

431

TC-1710-1880/1920-2200/2300-2690-010

Model: ACOMT2M02v06

TC-1710-1880/1920-2200/2300-2690-111

Model: ACOMT2A07v06

Electrical Properties Model

ACOMT2M02v06 Band 1

1710 - 1880

Band 2

1920 - 2200

Band 3

2300 - 2690

Port 1 ←→ Port 4

< 0.2 (1710 MHz - 1880 MHz)

Port 2 ←→ Port 4

< 0.2 (1920 MHz - 2200 MHz)

Port 3 ←→ Port 4

< 0.15 (2300 MHz - 2690 MHz)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

ACOMT2A07v06

Port 1 ←→ Port 4

Stop

By-pass (max. 2500 mA)

Port 2 ←→ Port 4

By-pass (max. 2500 mA)

By-pass (max. 2500 mA)

Port 3 ←→ Port 4

Stop

By-pass (max. 2500 mA)

Isolation (dB)

> 50

VSWR

< 1.28

Input power (W)

Port 1, Port 2, Port 3

< 300

Intermodulation products (dBc)

< -160 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit： 165 x 180 x 105 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

225 x 380 x 220

Combiner weight (kg)

Double Unit: ≤ 5 ≤6

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector *Insertion loss: IL* =

4.3-10 Female Sum(v1 + v2 + .... + vn) n

, V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

432

TC-1710-1880/1920-2200/2300-2690-010

Model: ACOMT2M02v06

TC-1710-1880/1920-2200/2300-2690-111

Model: ACOMT2A07v06

M8

Unit : mm

If the sign as shown above, it indicates this pass band is DC stop.

Combiner

■ If the sign as shown above, it indicates this pass band is DC pass.

433

QC-690-960/1710-1880/1920-2200/2300-2690-1111 Model: ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010 Model: ACOMQ2M01v06

Product Description 

Built-in lightning protection up to 10 kA.



Can be used as a combiner near the BTS or in a reciprocal

function near the antenna. 

Designed for co-location purposes.



Feeder sharing available.



Suitable for indoor or outdoor applications.



Wall or mast mounting.

Block Diagram

Port5

Port1

690 - 960

Port2

1710 - 1880

Port3

1920 - 2200

ACOMQ2A01v06

434

DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

DC/AISG By-pass

Port5

Port4

2300 - 2690

Port1

690 - 960

Port2

1710 - 1880

Port3

1920 - 2200

ACOMQ2M01v06

Port4

2300 - 2690

QC-690-960/1710-1880/1920-2200/2300-2690-1111 Model: ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010 Model: ACOMQ2M01v06

Electrical Properties Model

ACOMQ2A01v06 Band 1

690 - 960

Band 2

1710 - 1880

Band 3

1920 - 2200

Band 4

2300 - 2690

Port 1 ←→ Port 5

< 0.15 (690 MHz - 960 MHz)

Port 2 ←→ Port 5

< 0.25 (1710 MHz - 1880 MHz)

Port 3 ←→ Port 5

< 0.25 (1920 MHz - 2200 MHz)

Port 4 ←→ Port 5

< 0.20 (2300 MHz - 2690 MHz)

Pass band (MHz)

Insertion loss* (dB)

DC/AISG transparency

ACOMQ2M01v06

Port 1 ←→ Port 5

By-pass (max. 2500 mA)

Stop

Port 2 ←→ Port 5

By-pass (max. 2500 mA)

Stop

Port 3 ←→ Port 5

By-pass (max. 2500 mA)

By-pass (max. 2500 mA)

Port 4 ←→ Port 5

By-pass (max. 2500 mA)

Stop

Isolation (dB)

> 45

VSWR

< 1.28

Input power (W)

Port 1, Port 2, Port 3

< 300

Intermodulation products (dBc)

< -153 (3rd order; with 2 x 43 dBm)

Environmental Specification Operating temperature (℃)

-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67

Lightning protection** (kA)

10 (8/20 us)

Mechanical Specification Combiner dimensions (W x H x D) (mm)

Double Unit： 230 x 220 x 112 (without connectors, without mounting brackets)

Packing dimensions (W x H x D) (mm)

335 x 405 x 265

Combiner weight (kg)

Double Unit: ≤ 9 ≤ 10

Packing weight (kg) Mounting

Wall mounting // Mast mounting

Mast diameter (mm)

40 - 135

Connector

4.3-10 Female

Combiner

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

435

QC-690-960/1710-1880/1920-2200/2300-2690-1111 Model: ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010 Model: ACOMQ2M01v06

M8

■ If the sign as shown above, it indicates this pass band is DC pass.

If the sign as shown above, it indicates this pass band is DC stop.

436

Unit : mm

DC-STOP 690-2700 Model: ADCSTOP00v06

Features 

Used to isolate DC voltage from port 1 to port 2.



Low passive intermodulation products, low insertion loss and high power capacity.



Ultra wide band design for various communication system.



Small volume, light weight.

Combiner

Dimension figure

437

DC-STOP 690-2700 Model: ADCSTOP00v06

Electrical Properties Model

ADCSTOP00v06

Frequency range (MHz)

690 - 2700

Insertion loss *(dB)

Port 1 ←→ Port 2

≤ 0.1 (690 - 960 MHz // 1710 - 2700 MHz) ≤ 0.15 (960 - 1710 MHz)

Isolation for DC signal (dB)

Port 1 ←→ Port 2

≥ 70

VSWR

Port 1, Port 2

≤ 1.15 (690 - 960 MHz // 1710 - 2700 MHz) ≤ 1.2 (960 - 1710 MHz)

Input power (W)

Port 1, Port 2

Avg. ≥ 500 (690 - 2700 MHz)

RF Impedance (Ω)

50

Intermodulation products (dBc)

< -160 (2 x 43 dBm carrier)

Environmental Specification Operating temperature (℃)

-40 … +70

Application scene

Indoor or outdoor

IP rating

IP66

Lightning protection * * (kA)

3 (10/350 us)

Mechanical Specification 32 x 70.3 x 37 (with connectors and ground screw)

Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

50 x 82 x 50

Net weight (kg)

< 0.32

Packing weight (kg)

< 0.45 Port 1

4.3-10 Male

Port 2

4.3-10 Female

Connectors

Sum(v1 + v2 + .... + vn) *Insertion loss: IL* = , V1, V2 through Vn-1are insertion loss values at points for spacing of every 5 MHz in the passband n

from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4, calculate using the following formula: IL =

IL + 2 × IL + IL Min. Frequency Mid. Frequency Max. Frequency 4

**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.

438

E. Bracket & Installation Guide E-1. Bracket E - 1 - 1. Tri-sector Bracket

Bracket Type

Maximum Width of Antenna (mm)

Weight (Kg)

Dimension (mm)

Model

Page

TSC-S (3 Sector Clamp-Small)